Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹63.5 LAccepted-AOC 103 HARIAKSH PLAZA HOSPITAL ROAD BHUJ KUTCH GUIARAT 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L1 | Accepted-AOC Acceptance of contract | |
| 2 | L2₹66.0 L+₹1.2 L (1.83%)Rejected-Finance | L2 | Rejected-Finance Since not L1 bidder | |
| 3 | L3₹67.6 L+₹2.8 L (4.27%)Rejected-Finance | L3 | Rejected-Finance Since not L1 bidder | |
| 4 | L4₹67.7 L+₹2.9 L (4.49%)Rejected-Finance | L4 | Rejected-Finance Since not L1 bidder | |
| 5 | L5₹67.9 L+₹3.0 L (4.69%)Rejected-Finance | L5 | Rejected-Finance Since not L1 bidder |
Tender Value
₹90 L
EMD Value
₹1.6 L
Closing Date
3 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AMRITSAR
HQ CWE AMRITSAR
COMPREHENSIVE REPAIRS OF MD ACCN OF SOMNATH ENCLAVE JOGINDER SINGH ENCLAVE JCOs OR FAFA UNDER AGE BR II AT AMRITSAR CANTT UNDER GE AMRITSAR
2024_MES_661154_1
CWE/ASR-34/2024-25
Open Tender
Civil Works
Item Rate
270 days
AMRITSAR
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹1,000
GE AMRITSAR
₹1.6 L
Yes
12 Oct 2024
21 Jun 2024
5 Sept 2024
21 Jun 2024
3 Sept 2024
12 Jul 2024
Amount
Taking down cement plaster on brick or stone or concrete surfaces of wall etc including raking out joints, hacking for key, scrubbing down with water etc complete, all as specified and directed.
Material and labour for rendering 10 mm thick on fair face of brick works or concrete surfaces of walls with CM (1:6) finished the surface for even and smooth without using extra cement complete, all as specified and directed.
Material and labour for rendering 15mm thick on other than fair face of brick works or concrete surfaces of walls with CM (1:4) finished the surface for even and smooth without using extra cement complete, all as specified and directed.
Material and labour for Rendering 5mm thick in CM 1:3 to fair face of brick works or concrete surfaces of ceiling finished the surface for even and smooth without using extra cement complete, all as specified and directed.
Material and labour for preparation of new plastering surfaces of walls and applying two coat of cement base paint over a coat of primer etc. complete, all as specified and directed.
Material and labour for two coat of oil bound distemper over a coat of primer on newly plastered surface of wall including preparation of surface complete, all as specified and directed.
Material and labour for Three coats of white washing on new plastered surfaces of ceiling, chajjas after preparation of surfaces complete, all as specified and directed.
Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete, all as specified and directed.
Material and labour Brick work built CM 1:6 subclass B brick straight or curved on plan exc 6m mean radius complete, all as specified and directed.
All as per Srl Item No 09.00 here-in-before, but except bricks complete, all as specified and directed. Note:- Serviceable bricks obtained from dismantling of brick work shall be reused.
Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) as in boundary wall, drain etc complete, all as specified and directed.
Demolition of Reinfoced cement concrete for roofs, floors,(other than ground floors) beams, stair cases, landing,chajjaa and similar suspended work complete, all as specified and directed.
Material and labour for RCC with type B0 (1:2:4) (using 12.50mm graded aggregate ) in Slabs supported on walls , beams and columns in floors , roofs ., landings, balconies , canopies, deck slabs and cover slab in shelves and the like complete, all as specified and directed.
Formwork to the soffits of suspended slabs such as roof slabs , floor slabs , landings and similar work ; not exceeding 200 mm thick ( Horizontal or sloping ) and making flat rough finished surfaces of concrete complete, all as specified and directed.
Material and labour for TMT bars 6 to 8 mm mm dia and over , cut to length , bent to shape required , including cranking , bending spirally for hooping ends and binding with and including mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips complete, all as specified and directed.
Supply and fixing 15mm bib tap standard of PTMT any colour fancy type long body high pressure screwed for iron pipe and fixed (minimum weight 15 mm- 105 gms) etc complete, all as specified and directed.
Supply and fixing 15mm angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15 mm- 90 gms/20 mm-92 gms) complete, all as specified and directed.
All as per Srl Item No 17 above but with long shank & cup (concealed type) minimun weigth 15mm-110gms/20mm-112 gms) complete, all as specified and directed.
Supply and fixing 100mm swivel type shower rose of PTMT with shower arm15 mm size, 195 mm long of any colour for fixing with 15 mm pipe ( min weight 40 gms ) complete, all as specified and directed.
Supply and fixing 15mm Pillar taps,of PTMT any colour fancy type high pressure scewed for iron pipe and fixed complete, all as specified and directed.
Supply and fixing in repair for Vitreous China wash basin, white, flat back, size 500 X 400mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand complete as in repair complete, all as specified and directed.
Supply and fixing in repair for 10 Ltrs capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with all internal accessories and fixed to wall and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor complete, all as specified and directed.
Supply and fixing for vitreous china squatting pan 'Orissa' pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe)including connection to trap, and to flushing pipe, anti-syphonage pipe etccomplete including making good to floors with PCC bedding (1:5:10) type E2 using 40mm nominal brick ballast and connection to trap with cement mortar all as specified, and making good to floor including demilition of PCC / Lime concrete bedding existing pan complete, all as specified and directed.
Supply and fixing in rapair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete, all as specified and directed.
Supply and fixing in repair PVC waste pipe 32/38/40 mm dia, 600 to 750 mm long complete, all as specified and directed.
Supply and fixing in repair PVC connections 15mm size with PTMT nuts of length 450mm complete, all as specified and directed.
Supply and fixing for 40mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete, all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable rubbish off the premises complete, all as specified and directed.
Material and labour roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with cement @ 3.0 Kg/Sqm complete, all as specified and directed.
Material and labour for 15mm thick Screed bed or beading layer of cement mortar (1:6) for laying floor finishes complete, all as specified and directed.
Material and labour for 10mm thick Screed bed or beading layer of cement mortar (1:4) for vertical surfaces like dado, skirting etc. complete, all as specified and directed.
Material and labour for Non-skid Ceramic colour tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete, all as specified and directed.
All as per item No 33 above but as in skirting complete, all as specified and directed.
Material and labour for Glazed ceramic colour tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete, all as specified and directed.
Material and labour 20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick Screed in CM (1:6) complete, all as specified and directed.
Taking up or down steel tubing and connections for 15mm bore of pipe complete, all as specified and directed.
Supply and fixing for 15mm dia Tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors , wall etc ( surface or concealed type) complete, all as specified and directed.
Re-fixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc complete, all as specified and directed. (Old serviceable pipe received from Srl Item No 37 to be reused)
Taking up or down steel tubing and connections for 20mm bore of pipe complete, all as specified and directed.
Supply and fixing for 20 mm dia Tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors , wall etc ( surface or concealed type) complete, all as specified and directed.
Re-fixing for 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc complete, all as specified and directed. (Old serviceable pipe received from Srl Item No 40 to be reused)
Supply and fixing for 500 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with manhole cover of tank with its locking arrangement, making hole for inlet, outlet and overflow connection including dismantling / taking down old PVC water tank, ball valve etc complete all as specified in SSR Part-I complete, all as specified and directed.
Supply and fixing in repair 20 mm Ball valves high pressure of PTMT with epoxy coat ed Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0mm-210gms) complete, all as specified and directed.
Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) nxc 1.50 sqm each complete, all as specified and directed.
Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) exc 1.50 Sqm & nxc 4.00 Sqm each complete, all as specified and directed. (as in doors)
Taking down shutters of any description exc 1 Sqm but nexc 2 Sqm each complete, all as specified and directed.
Taking down and refixing same opening shutter exc.1 sqm and not exc 2 sqm each complete, all as specified and directed.
Supply and fixing framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete FE -290 Gde E-165 complete, all as specified and directed.
Supply and fixing factory made PVC Internal door frame of size 100 mm x 45 mm with a wall thickness of 5 mm (+0.25) , made out of extruded 5 mm (+0.25) thick PVC sheet manufactured by asn ISO - 9001-2008 certified company, and by joining 3 Nos heat bent PVC sheet sections. The inside section of size 90 x 30mm shall be made from plain colour PVC sheet of 5 mm (+0.25) thickness. The inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from 5 mm (+0.25) thick plain PVC sheet. The frame shall be mitre cut at two corners and oined with 4 Nos of 150 mm long brackets of 15 mm x 15 mm square tube . The two vertical door frames are to be reinforced with 40mm x 20mm MS tube of 19 guage through out the frame . The door frame whslla be fixed to the wall using 8/100 mm long MS Screws through thee frame by using anchor fasteners. A minimum of 4 Nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc as per manufacturer's specification, complete, all as specified and directed.
Material and Labour for Providing 30mm thick " FACTORY MADE DOOR SHUTTER - WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottoMaterial and labourock rail. M.S frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multichamber hollow PVC section of 1 mm wall thickness, bonded using solvent cement / eynoacrylate adhesive with 5mm (+0.25) thick moulded PVC sheet of Density 600 Kg/Cbm Manufactured by an ISO-9001-2015 certified company with 2, 4, 6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel, 5mm (+0.25) plain/prelam PVC sheet to be pasted using solvent cement / cynoacrylate adensive on other side of the Hollow PVC section. All the four edge of the panel to be sealed with lipping of 10mm thick & 20mm wide PVC sheet baton (Made by sticking 02 Nos. foam PVC sheets of 5mm (+0.25) thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain / prelam mouded PVC sheet of door. 20mm thick (5mm x 4 Nos) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos. stainless steel but hinges of size 100mm *25mm*2mm and 50mm longsteel screws drilled suitable to pass through both the walls of M.S tube. other hardwares should be fixed with 25mm*8mm size steel screws etc, complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing complete, all as specified and directed.
Material and labour 30 mm thick Glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauge etc size of members of shutters as specified in SSR part-I Section 8 and clause 8.24(a) of second class hard wood complete, all as specified and directed.
Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame, comprises glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1020/08 Sh 1/3 to 3/3 dt 01 May 2008 complete all as specified and directed.(a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window.(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf.(c) MS tower bolt 150mm long - 02 Nos/leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf.(e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf.(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf complete, all as specified and directed. Note :- MS guard bars, sheet glass wire mesh and painting shall be measured and paid seperately
Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified. NOTE : , Guard bar, Sheet glass and painting shall be measured and paid Separately.
Supply and fixing 35 mm thick flush shutter, soild core construction, with block board core and plywood face panel commercial type on both sides complete, all as specified and directed.
Supply and fixing for 35mm thick 2nd class hard wood panelled shutters (two panels) Factory Made with lock rail & panel of 9mm BWP commercial ply or 12mm thick vineered particle board with commercial vineering on both faces, the size of rail & styles as per IS: 1003 (Part-I) klin seasoned & chemically pressure treated (factory made shutters) complete, all as specified and directed.
Supply and fixing framed work such as grill, framed guard bar and similer work conforming to FE 290, GDE E- 165 complete, all as specified and directed.
Supplying and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete, all as specified and directed.
Supplying and fixing in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete, all as specified and directed.
Hacking out old broken glass any thickness, size, quality or description from wooden frames or metal frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete, all as specified and directed.
Supplying and fixing 3mm thick ordinary sheet glass and glazing with oil putty or fixed with wooden beading, in squares not exc 0.50 Sqm in each panes complete, all as specified and directed.
Supply and fixing 3mm thich figured glass pin head type and glazing with oil putty in squares not exc 0.50sqm in each pane complete, all as specified and directed.
Supply and fixing 150 mm aluminum , anodised, barrel tower bolts of extruded section complete, all as specified and directed.
Supply and fixing butt hinges 100mm size medium weight cold rolled mild steel, fixed with screws or welded to steel frame complete, all as specified and directed.
Supply and fixing 150 mm aluminum Handle Cast type complete, all as specified and directed.
Supply and fixing 250mm aluminum alloy, anodised , sliding door bolt with hasp and staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete, all as specified and directed.
Supply and fixing M.S. 300mm ordinary rat tail rod pattern spring including roller and roller plate complete including necessary welding to door frame complete, all as specified and directed.
Material and labour for preparation of new steel surface and applying two coat of synthetic enamel paint over one coat of red oxide primer on new surface complete, all as specified and directed.
Material and labour for preparation of new wood surface over 10 cm girth or width and apply two coat synthetic enamel paint over a coat of pink primer complete, all as specified and directed.
Material and labour for cup board shutter, frame made of angle iron 35x35x6mm, covered with 1.00mm thick MS sheet, welded to frame including suitable handle, lugs and locking arrangement complete, all as specified and directed.
Supplying and fixing PVC sheet 5mm thick, in backside of kitchen cabinets for support complete, all as specified and directed.
Supplying and fixing PVC board 18mm thick, in cupboard shelves and backside (for hanging) kitchen cabinet etc complete, all as specified and directed.
Supply and fixing solid PVC shutter 18mm thick with one side prelam of any shade plain colour as in cup board, kitchen cabinet shutter etc. complete, all as specified and directed.
Supply and fixing40 mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete, all as specified and directed.
Supply and fixing 75-80mm long stainless steel handle complete, all as specified and directed.
Material and labour for providing PCC 1:2:4 type B-1 ( using 20 mm graded stone aggregate ) for fixing of hold fast complete, all as specified and directed.
Demolition of cement concrete in ground floors and pavings (unreinforced) n.exc 15 cm thickness (below or above ground level) complete, all as specified and directed.
Material and labour precoated chequered cement concrete tile of size 20cm x20cmx22mm thick over and including 15mm thick cement screed in CM 1:6 set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the colour of tiles complete, all as specified and directed.
Material and labour for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in 50 mm thick plinths protection and as in path and floor complete, all as specified and directed.
Supply and fixing, in 25mm dia MS pipe PVC sheathed, decorative fancy type, curtain rod including brackets & a set of ABS final complete, all as specified and directed.
Supply and fixing in repairs 110 mm bore PVC (SWR ) pipes single socketed, in any length with rubber ring fixed to wall.with clamp etc complete, all as specified and directed.
Supply and fixing PVC (SWR) bend 110 mm size complete, all as specified and directed.
Supply and fixing 110 mm bore PVC (SWR) single Tee complete, all as specified and directed.
Material and labour 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete, all as specified and directed.
Dismantling brick tiles or terracing tile, single/double layer on roof including mud phuska any thickness and leepng plaster, seggregating, cleaning and stacking servicable tiles for reuse complete, all as specified and directed.
Demoliton of mud in roof any thickness including mud plastering and removing to distance exc 250m but n exc 500m complete, all as specified and directed.
Material and labour for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement complete, all as specified and directed.
All as per Srl Item No. 87.00 here-in-before but except brick tiles complete, all as specified and directed. Note:-Old serviceable tiles shall be reused.
Material and labour for PCC (1:3:6) type C-0 (using 12.5mm graded stone aggregate) averaging 50 mm thick as in roof padding mixed with WPC @ 100ml per 50 Kg cement finishing the surface even and smooth without using extra cement complete, all as specified and directed. Note : WPC shall be measured and paid separately under relevant item of Sch 'A'/BOQ).
Material and labour for 15mm thick plaster in CM (1:3) on RCC roof surfaces as in vertical surfaces mixed with water proofing liquid compound finished the surface even and smooth without using extra cement complete, all as specified and directed. (Note : WPC shall be mixed @ 100 ml / 50 Kg bag of cement or as recommended by manufacturer and the same shall be measured and paid seperately.
Material and labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc complete, all as specified and directed.
Material & Labour for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces complete, all as specified and directed.
Supply only water proofing compound liquid type (ISI Marked) complete, all as specified and directed.
Demolition of cement Concrete in sunken floors exc 15cm thick ( above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete, all as specified and directed.
Material and labour for cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sides of sunken slab benching etc including necessary form work complete, all as specified and directed.
Material and labour for rendering 15mm thick cement plaster as in sunken portion in cement mortar 1:3 using water proofing compound, finished fair and even without using extra cement complete, all as specified and directed. (WPC measured saperatly)
Supply and fixing 40mm bore steel water tubing grade galvanised inserted at the end of lateral slope projecting atleast 25cm beyond the outermost part of the building below the drain pipe up to two storey construction as spout for sunken, and all joints should be sealed properly by epoxy sealent complete, all as specified and directed.
Material and labour Water proofing treatment to sunken floor including wall comprising with the following course of treatment/ specification from bottom to top. (a) Applying bituminous primer @ 0.40 ltrs per sqm over plastered surface of floor for treating the sunken floor all as specified & as directed by Engr-in-Charge. (b) Apply a coat of hot bitumen 85/25 penetration grade bitumen @ 1.20 kgs/Sqm. (c) One layer of 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire area, complete, all as specified and directed. Note:-(i) After plastering testing tobe carried out by ponding (For 48 Hrs) and any leakage/Seepage observed shall be rectified before water proofing treatment. (ii) Laying of APP membrane shall be done as per manufracturers instructions. (iii) Joints tobe touched hot and Minimum width of overlaps not less than 150mm.
Material and labour Plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in sunken filling as mass concrete or in sub base of floors complete, all as specified and directed.
Raking out joints/pointing to brick work or brick tiles, 30cmX15 cm laid flat, in floor , surface channels, roofs etc complete, all as specified and directed.
Material and labour for flush pointing to brick 30cmX15 cm laid flat, brick on edges or brick tiles in paving in cement mortar 1:3 complete, all as specified and directed.
Supply and fixing in repair Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges complete, all as specified and directed.
Supply and fixing 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete, all as specified and directed.
Material and labour for 75 mm thick PCC ( 1:4:8) type D-2 using 40mm graded stone aggregate as in sub-base complete, all as specified and directed.
Material & labour preparing old decorated plastered/unplastered wall surfaces including cornices by brooming down with steel wire brushes and scraping down smokes, spots etc applying one coat of oil bound distemper complete, all as specified and directed.
Material and labour for complete removal of existing treatment on old decorated plastered/unplastered wall surfaces including cornices by brooming down with steel wire brushes and scraping down smokes, spots etc or preparation of new plastered surfaces and applying Two coat of Oil Bound Distemper over a coat of primer complete, all as specified and directed.
Material and labour for preparation of old decorated brick/ concrete plastered or unplastered surfaces of walls, pillars, cornices by brooming down etc and applying one coat of white wash on walls, pillars, cornices etc complete, all as specified and directed.
Material and labour for preparation of old decorated brick/ concrete plastered or unplastered surfaces of ceiling by brooming down etc and applying one coat of white wash on ceiling, etc complete, all as specified and directed.
Material and labour for preparation of old decorated brick/ concrete plastered or unplastered surfaces of walls, pillars,cornices by Brooming down etc and applying one coats of cement base paint on walls, pillars, cornices etc complete, all as specified and directed.
Material and labour for preparation of old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described for One coat of synthetic enamel paint complete, all as specified and directed.
Material and labour for One coat of synthetic enamel paint after preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth complete, all as specified and directed.
Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, sockets, lamp holders, brackets, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls etc. as per existing finishes by plastering, repairs and white / colour wash etc. complete, all as specified and directed.
Supply and fixing point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FR) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated 1.50 sqmm size copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed, are as follows :-
One light/one fan/one bell point controlled by one, one way switch complete, all as specified and directed.
One light point controlled by two Nos of two way switch complete, all as specified and directed.
One socket outlet 5 pin 5 Amp controlled by one, one way switch on same board complete, all as specified and directed.
One socket outlet 5 pin 5 Amp controlled by one, one way switch on independent board complete, all as specified and directed.
All as per item No. 113 hereinbefore but wiring with using cable 2.50 sqmm size copper wire (FR) and earth wire of PVC insulated (Green colour) 2.50 Sqmm size copper wire for one 6 pin socket outlet, 16 Amperes on independent board complete, all as specified and directed.
Supply and Fixing Modular switch 6 Amp 1 way 1 module size complete, all as specified and directed.
Supply and Fixing Modular switch 6Amp 2 way 1 module size complete, all as specified and directed.
Supply and Fixing Modular switch 16 Amp 1 way with indicator 1 module size complete, all as specified and directed.
Supply and Fixing Modular socket shuttered 6 Amp 2/3 pin combined 2 module size complete, all as specified and directed.
Supply and Fixing Modular socket 16Amp multipurpose type 2 module size complete, all as specified and directed.
Supply and Fixing Modular Fan regulator step type 120 watts 2 Module size complete, all as specified and directed.
Supply and Fixing Ceiling rose, surface bakelite 3 terminal, 240 volts, 5 Amps with back plate of 3 mm thick bakelite, laminated hylem sheet of appropriate size, complete, all as specified and directed.
Supply and fixing lamp holder, PVC / polycarbonate type insulated body with back plate suitable for batten / angle fittings complete, all as specified and directed.
Supply and fixing of single phase call bell ‘DING DONG’, AC 230 volts single pole fixed over and including pressed steel sunk box of size 175 X 100 mm duly covered with 3 mm thick bakelite sheet ccomplete, all as specified and directed.
Supply and fixing bell push, flush type, single pole 5 amps complete, all as specified and directed.
Supply and fixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘C’ curve type complete, all as specified and directed.
Supply and fixing MCB double pole, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘C’ curve type complete, all as specified and directed.
Supply and fixing Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 12 way with IP-43 and IK-09 protection, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified. Make (Note : cost of removing old wooden box and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate) complete, all as specified and directed.
Supply and fixing MCCB Incomer distribution board double door vertical type made out of CRCA MS sheet surface with insulated material like polyester or with epoxy powder coating surface mounting TPN 4 way, 415 volts with copper bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB and IP 43 - IK 09 protection with and incl 100 amp 36 kA 4 pole MCCB with thermal - magnetic setting and Icu = Ics = 100% including Suitable type MCB with blank plate including taking down old MCCB all as specified and directed complete all as specified. . (Note : The cost of removing old wooden/steel box etc and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate) complete, all as specified and directed.
Material and labour for sub main wiring with 1100 volt grade two single core FR Wire PVC insulated and unsheathed cable with stranded copper conductor 6 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 6 sqmm multi - stranded copper conductor as earth wire in green colour complete all as specified and directed. Including taking down old unserviceable sub main wiring complete, all as specified and directed. NOTE: 3 single core 6 sqmm and PVC conduit shall be measured as one RM.
Supply and fixing wall /ceiling mounting LED 18 Watt pride plus/smart line tube light fitting complete with all acessories 1x18 Watt LED , with CCT of 6000k suitable for domestic application, 240 Volts, 50 Hz, and internally pre-wired with 1.5 sqmm twin twisted flexible cable copper conductor and connection complete as per or its equivalent approved make inj complete, all as specified and directed.
Supply and fix in replacement of security light fitting LED 45 (dusk & down sensor) Watt aluminum pressure dia cast housing with touched glass cover IP-66 protection Including suitable size and accessories complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with muyltistranded copper conductor of size not less than 1.5 sq mm including GI pipe 32 mm dia 1 mtr long bend to shape (light grade) from celing rose to fitting terminal including taking down old CFL security light fitting complete, all as specified and directed.
Supply and fixing fan regulator electronic step type socket size and making all necessary connections complete, all as specified and directed.
Material and labour for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1, GI protection pipe light grade 15 mm bore up to 7.5 m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 X 150 X 15 mm & painting of earth result etc. including testing on complete, all as specified and directed.
Note : - (i) Earth lead and protection pipe beyond 7.5 m shall be measured and Paid separately. (ii) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to Govt.
Material and labour service connection PVC cable 10 Sqmm 2 Core incl GI wire and PVC conduit for fixing in wall /pole incl connection complete, all as specified and directed.
Supply and fixing GI bracket light grade GI Pipe 1.2 mtr Length for fixing of street light fitting 25/45/60 Watt including connection complete, all as specified and directed.
Supply and fixing bell push, Module type, single pole 5 amps complete, all as specified and directed.
Fixing only same ceiling fan 1200/1400 mm size , after B/R repairs complete, all as specified and directed. Note: Cost of minor petty items if required such as nut bolt/clamp is included in quoted rate.
Supply and fixing ceiling fan 1200mm sweep complete with blades, down rod, electronic regulator, accessories (i.e. PVC canopy, rubber bush, split pin, hanging clamp, holdfasteners etc.) 230 Volts, white colour, with min air delivery 210 CFM, BEE 5 star rated with brushless direct current motor (BLDC) technology and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to ceiling fan and writing MES No complete, all as specified and directed.
Supply, install & testing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, single phase, 1200 RPM, Copper winding of sweep 300mm complete fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to exhaust fan and writing MES No. including cutting hole suitable for fixing exhaust fan complete, all as specified and directed.
Supply and fix fresh air fan 250mm size including making of hole/opening in wall complete, all as specified and directed.
M/s. M Company (BID ID -3065055)
Chander Mohan Arora Contractor (BID ID -3064685)
GEE EMM ASSOCIATES (BID ID -3072083)
Santokh Singh and Associates (BID ID -3065128)
S S CONSTRUCTION COMPANY (BID ID -3073211)
Bharatbuilder (BID ID -3064449)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .