PROVN OF 05 X GD POST AT APJD ZONG AND PROVN OF 125 KVA GENERATOR SET ALONGWITH 100 KVA SERVO STABLIZER AT 106 FD WKSP COY EME FOR SECURITY FENCING LIGHT UNDER GE TAWANG

Amount

Surface excavation n. exc (not exceeding) 30cm deep and averaging 15cm deep and getting out soft loose soil

Excavation in trenches, n exc (not exceeding) 1.5 m wide and n. exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10Sqm on plan and n ex 1.5m in depth and getting out hard/dense soil

M&L hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate complete all as specified and directed

M&L for PCC 1:3:6 TYPE-C1 20mm graded aggregate in pre-cast cement concrete block masonry with solid blocks exc 10cm in width and setting in CM 1:4 complete all as specified and directed.

M&L for 75mm thick plain cement concrete (1:4:8) type C2 using 40mm graded stone aggregate as in sub base of floors, complete all as specified and directed.

M & L 25mm for cement concrete type D2 1:2:4 (12.5 mm graded all as specified and directed aggregate) complete all as specified and directed.

M & L for screed bed or bedding layer of mortar 15 mm thick for layinf floor finishes (CM 1:4) complete all as specified and directed.

M&L for non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0. 11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed

M & L for steel work in tubular trusses including special shaped washer etc complete using ERKW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 complete all as specified and directed.

S & F pre-painted galvatume aluminium Zince coaing GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) without using extra cement complete all as specified and directed.

M&L rendering 15mm thick other than fair faces of brick work or concrete surfaces in CM (1:4) without using extra cement complete all as specified and directed.

M&L preparing of newly plastered surfaces and applying two coat of Cemet base paint over Priming plastered ans other surface with alakali resistant priming paint all as specified and directed

M&L preparing of newly plastered surfaces and applying two coat of distemper oil emulsion over clearcolle on plasteredand other surfaces to distempering all as specified and directed

M&L for 75mm thick plain cement concrete (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection finished the surface of concrete fair and even complete all as specified and directed.

M & L 4 mm thick ceiling for playwood grade BWR, type BB, fixed with screws to timber frame works deduct if fixed with nail and add if fexed in ceiling, flat of slooping complete all as specified and directed.

S&F 2nd class hardwood plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F for 30mm thick 2nd class plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

M&L for preparation of new wood surfaces and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F butt hinges 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts 100mm long of extruded section complete all as specified and directed.

S&F aluminium handles 125mm size, cast type, anodised complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 200mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy all as specified and directed.

M&F 4mm thick sheet glass ordinary quality and glazing with oil puty in square nexc 0.5 sqm in each pane all as specified and directed

S & F for second class hard-wood in scantlings for wall paneling and ceiling all as specified and directed.

S & F for second class hard-wood in clean sawn boarding ,50 mm thick with butt joint all as specified and directed.

M&L extra for forming fair finished to drain or channel 30 cm inner girth in cement including forms, mould mitred/stopped ends etc all as specified and directed.

M & L for PCC type C1 (1:3:6) in surface channels and drain complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers in not exc 25 cm complete all as specified and directed.

Removing excavated soil exc. 50m but n exc 100m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

E/M Portion M/L for point wiring with 2 single core FRLS PVC insulated, unsheathed stranded copper conductor of size 1.5 sqmm in and including suitable size PVC casing & caping with teak wood boxes and 3mm thick plastic laminated sheet top cover for light/fan/socket controlled by one switch complet with 1.5 sqmm PVC insulated unsheathed multistandard copper conductor 1100 volts grade green colour for earth continuity complete all as specified and directed.

All as per item No 33 here-in-before but for one 5 Amp socket outlet independent board complete all as specified and directed

All as per item Ser No 33 above but for one 15 Amp socket outlet independent with 2 run of cable of size 4 sq mm and one run of 2.5 sq mm cable as earth continuity complete all as specified and directed.

Supply and fixing switch piano flush type single pole one way 5 Amp 240 volts complete all as specified and directed.

Supply and fixing for switch socket combination 2 in 1 , 5 pin 5 Amps flush type 240 volts complete all as specified and directed.

Supply and fixing for switch socket combination multipurpose 15 A flush type, 5 in 1 240 volts complete all as specified and directed.

S&F for ceiliing rose three terminal surface type bakelite 65x50 mm complete all as specified and directed.

Supply & fixing surface and wall mounted LED batten 20 watt extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver with LED Lamp complete all as specified and directed. Make Havells ENDURALINEARNEOBS20WLED840SPCWH & equivalent make specified.

S&F battern LED light fittings, 1x10W luminiaries with lamp holder, etc. Complete with all acessories and including connecting upwith twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified and directed. Make Havells cat part No. LHLDERHEMD8X010 & equivalent make specified.

S&F security LED light fittings, 1x40W LED luminiaries Complete with all acessories and including connecting upwith twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ, 40mm light grade GI pipe with suitable clamps, nuts, bolts and all fitting accessories complete all as specified and directed.Make Havells Cat part No. ENDURAPEARLNEOSL40WLED757PASYTOPC & equivalent make specified.

Supply and fix sheet metal enclosures for DBs (Double door type) when MCBs to be used 240 volts 04 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

Supply and fixing only MCB SP, 240V,6 to 32 Amps,10 KA complete all as specified and directed.

Supply and fixing MCB SPN 240V 40 Amps,10 KA complete all as specified and directed.

S & F wiring for circuit/submain wiring alongwith earth wire with the size of 2 X 6Sqmm + 1 X 6sqmm as earth wire in PVC conduit. complete all as specified and directed. ( from TPN board to GD post Shed SPN DB as incoming).

Supply,install and commissioning of diesel engine drive generating set comprising of four stroke vertical cylinder water cooling, directly coupledwith AC Alternator self execited, self regulated and screen procted dust and vermin proof with static excitation system capable of rated 125 KVA /100 KW 415 volts,3 phase,4 wire, 50HZ fixed on common structural steel fram on anti vibration miunting pad including fuel tank with line, 12 volts battery with standing arrangement etc, hiused in and including sound proof accoustic enclousure canopy of suitable size as per manufacturer design including control panel and necessary engine confrming to IS-10001/10002 and alternator as per IS-13364 including panel and necessary PCC foundation, excavation, returning filling and removing surplus soil complete all as specified and comparing of the following:- (a)The engine shall be capable to stand de-rating factor at Tawang for 125KVA rated output of alternator. (b)Fuel tank with level indicator having storage capacity is not less than 8 hours continious running. (c)Silencer and exhausted piupe lagging with temperature and low Lub oil pressure. (d) Engine safety protection for higher temperature and low Lub oil pressure. (e) Gauge and meters such as Lub oil pressure gauge, water temperature gauge, RPM Meter Hours Meter etc. -Make - Mahindra Powerol (Note: Testing and Manning is the responsibility of unit) Make : Kriloskar, cumins, L&T.

Supply and fix voltage stablizer for automatic operation, three phase, naturally oil cooling,indoor type & designed for input variation between 300 V 480 V with output voltage stabilized at 415 with accuracy +2.5%and speed of correction 8 volts per second and of capacity 100 KVA. Make: SERVOKON,SUCAM,LINEX.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoursed electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120sq mm 3.5 core.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoursed electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core.

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized iron strip 32x6mm as earthing lead by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm, reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways, one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil, dismantling and taking out old earthing plate and necessary testing complete all as shown on electrical plate No 5 of SSR Part –I (2009) complete all as specified and directed.

M/S ACE BUILDERS

M/S ARGI ENTERPRISES

PARBIN SIDDIKI

M/S SHYAMAL SARMAH

M/S THONGDOK ASSOCIATES

M/S L.N. TRADERS