Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.1 LAccepted-Finance 151 PHASE II INDUSTRIAL AREA CHANDIGARH CHANDIGARH 160101 | CHANDIGARH | CHANDIGARH | 160101 | ₹4.1 L | L1 | Accepted-Finance Agency found L1 |
| 2 | L2₹5.6 LRejected-Finance 62 DADUMAJRA CHANDIGARH U T CHANDIGARH | NA | NA | 160001 | ₹5.6 L | L2 | Rejected-Finance Agency not found L1 |
Tender Value
₹6.4 L
EMD Value
₹12,892
Closing Date
12 Jun 2026, 2:00 pmClosed
Executive Engineer C P Division No 5 Chandigarh
Executive Engineer C P Division No 5, Deluxe Building Ground floor Sector 9 D Chandigarh
Replacement of Old Damaged Cupboards due to Termite with Aluminum Frame and HDHMR Board Shutters in Half Way Home (AASHREYA), Sector 47, Chandigarh.
2026_CHD_93117_1
EECP5/2026/2861396 dated 05.06.2026
Open Tender
Civil Works
90 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹12,892
16 Jun 2026
6 Jun 2026
12 Jun 2026
6 Jun 2026
12 Jun 2026
6 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of
any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,
including pointing in white cement mixed with pigment of matching shade complete DSR 8.31 | 151.5 | sqm | 1,233.72 | ₹1,86,908.58 | BI01010001010000000000000515BI0100001140 |
| 2Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer in-charge: DSR 10.14 | ||||||
| 2.01 | Profile B DSR 10.14.1 | - | - | - | - | BI01010001010000000000000515BI0100001141 |
| 2.02 | Fixing with adjustable lugs with split end tail to each jamb DSR 10.14.1.1 | 66.16 | rmt | 567.55 | ₹37,549.11 | - |
| 3Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : DSR 13.62 | ||||||
| 3.01 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR 13.62.1 | 42.08 | Sqm | 220.14 | ₹9,263.49 | - |
| 4 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR 15.56 | 97.25 | sqm | 53.17 | ₹5,170.78 | - |
| 5 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved DSR 15.60 | 1.82 | cum | 256.82 | ₹467.41 | - |
| 6Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : DSR 21.1 | ||||||
| 6.01 | For fixed portion DSR 21.1.1 | - | - | - | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.92 MB
BOQ_113981.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid