REPAIR/ MAINTENANCE OF HANGAR LIGHTS, HIGH MAST LIGHTS, TARMAC LIGHTS AND FLOOD LIGHTS INCLUDING CONNECTED ACCESSORIES AT AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT-10

Amount

Opening medium bay hangar roof light fittings of any capacity and removing unserviceable items like ballast ,igniter,lamp, control gear / driver etc and keeping in safe custody for taking credit and re-fixing the same in position after carrying out repair including testing etc complete all as specified and directed by Engr-in-Charge. Note : (a) Material required to make the light fittings serviceable shall be measured and paid seperately under relelvent items. (b) Hydraulic boom lifter vehicle required for repairing hanger roof lights fixed at a height up to 20 Mtr above from ground level complete with the following arrangement :- (i) Hydraulic boom lifter shall have suitable covered tiltable plaltform at the end for carying to person for working. (ii) The haydraulic boom lifter shall be wheeled vehicle and adequate counter weight shall be provided for balancing the vehicle while lifting the platform. The quoted rate shall deemed to be included in the item for the above provisions and nothing extra shall be paid on these account.

Taking down unserviceable light fittings from the tarmac/ dispersal / taxi track by removing glass cover and checking the unserviceable parts like copper ballast, lamps, ignitor, capacitors & control gear box etc and re-fixing the fittings back to its original position after carried out all necessary repairs to make the fitting serviceable.( Note:- The spare parts to be replaced shall be measured and paid separately under respective items here-in- after).

Taking down unserviceable light fittings from the high mast by lowering the high mast by winch & motor including removing glass cover and checking the unserviceable parts like copper ballast, lamps,electronic driver, ignitor, copper wire link ,capacitors & control gear box, overhaling of rope wire , rope wire nut bolt , clamp etc and re-fixing the fittings back to its original position after carried out all necessary repairs to make the fitting serviceable.( Note:- The spare parts to be replaced shall be measured and paid separately under respective items here-in- after).

Supply only in replacement of open construction copper ballast suitable for 400 watt MH Light fitting Make : Bajaj or its equivalent in Venture/Crompton/Havells/Halonix.

Supply only in replacement of open construction copper ballast suitable for 250 watt MH Light fitting Make : Bajaj or its equivalent in Venture/Crompton/Havells/Halonix.

Supply only in replacement of Lamp Metal Halide tubullar single ended 400w complete. Make- Bajaj, /Philips/Havells

Supply only in replacement of Lamp Metal Halide tubullar single ended 250w complete. Make- Bajaj /Philips/Havells

Supply only in replacement of super imposed 3 lead igniter suitable for 400w MH fitting. Make : Havells Cat part No. LHNW27000C99 or its equivalent in Crompton/ Halonix.

Supply only in replacement of electronic driver for LED flood light 90/120 watt complete. Make :Bajaj/ Crompton/ Havells.

Supply only in replacement of electronic driver for LED flood light150/240 watt complete. Make :Bajaj/ Crompton/ Havells.

Supply only in replacement of Electronic Driver for INHB1620C/P 200W Circular Induction complete Make : Crompton/ Halonix/Havells/C&S.

S&F in replacement of new generation high efficient LED Bay light 200 Watt made of die cast auminium housing with 10KV SPD, lens & toughened glass IP66 protection low weight for easy installation 90 degree wide distribution complete with driver compartment , driver and all accessories including all installation arranement required at site by contractor without any extra cost complete all as specified. Make : Halonix Cat part No. HLBL-ML04-200-CWL or its equivalent in Havells/PHILIPS.

S&F in replacement of new generation high efficient LED Bay light 250 Watt made of die cast auminium housing with 10KV SPD, lens & toughened glass IP66 protection low weight for easy installation 90 degree wide distribution complete with driver compartment , driver and all accessories including all installation arranement required at site by contractor without any extra cost complete all as specified. Make : Halonix Cat part No. HLBL-ML06-250-CWL or its equivalent in Havells /PHILIPS.

S&F in replacement of LED flood light 180 Watt with high pressure die cast housing with lense ( IP 65 Protection) 3rd generation with ultra slik light weight and with secondary optics made of pressure die cast housing including all accessories prewired of capacity 180 Watt complete. Make: Bajaj Cat Pt No.BJFL180 Watt LED Warm White or its equivalent in Philips /Crompton.

S&F in replacement of LED flood light 200 Watt with high pressure die cast housing with lense ( IP 65 Protection) 3rd generation with ultra slik light weight and with secondary optics made of pressure die cast housing including all accessories prewired of capacity 200 Watt complete. Make: Bajaj Cat Pt No.BJFL200W LED Warm White or equivalent in Philips/Crompton

S&F in replacement of highly efficient LED flood light fitting 400 watt warm white with lense made of pressure die cast aluminium housing , extruted aluminium heat shrink and enclosed with toughened glass IP-66 internally prewired including electronic driver and connecting up with Three core flexible copper conductor 1.5 sqmm cable complete all as specified.

S&F in replacement of Traffic light LED type red/green/white/Blue/Orange, 24 hrs operation 300 mm round light source ,visibility> 500 mtrs ,operating voltage 230 Volt AC complete with poly carbonate enclosure and clear diffuser complete all as specified. Make: Vista model TL300 /Bajaj or equivalent in Philips /Crompton/ C&S.

S&F in replacement of LED Aviation Obstruction 6 Watt Light with yellow painted die cast aluminium alloy housing, with polycarbonate enclosure complete. Make: Bajaj/Havells/ Crompton.

S&F in replacement of LT 3 phase 4 wire 415 volts transparent Kiosks cubical pole box moulded in single piece of size 300mm x 200mm x 100mm shock proof, rust proof, fire retardant with 4 Nos aluminium bus bar of capacity 100 Amps mounted on DMC unbreakable insulators complete all as specified.

S&F in replacement of LED flood light 120 Watt with high pressure die cast housing with lense ( IP 66 Protection) 3rd generation with ultra slik light weight and with secondary optics made of pressure die cast housing including all accessories prewired of capacity 120 Watt complete. Make: Bajaj Cat Pt No.BJFL120 Watt LED Warm White or its equivalent in Philips/Crompton

S&F in replacement of LED flood light 150 Watt with high pressure die cast housing with lense ( IP 66 Protection) 3rd generation with ultra slik light weight and with secondary optics made of pressure die cast housing including all accessories prewired of capacity 150 Watt complete. Make: Bajaj Cat Pt No.BJFL150W LED Warm White or its equivalent in Philips/Crompton

S&F in replacement of highly efficient LED flood light fitting 250 watt warm white with lense made of pressure die cast aluminium housing , extruted aluminium heat shrink and enclosed with toughened glass IP-66 internally prewired incl electronic driver and connecting up with three core flexible copper conductor 1.5 sqmm cable complete all as specified.

S&F in replacement of LED flood light 100 Watt with high pressure die cast housing with lense ( IP 66 Protection) 3rd generation with ultra slik light weight and with secondary optics made of pressure die cast housing including all accessories prewired of capacity 100 Watt complete. Make: Bajaj Cat Pt No.BJFL100W LED or equivalent in Philips/Crompton

S&F in replacement of outdoor type cubical Feeder pillar box ( bus bar chamber) 1200mm x 1000mm x 600mm size suitable for 3 phase, 4 wire, 415 V, factory fabricated with CRCA sheet not less than 3.15 mm thick having modern fabrication process powder coating in approved shade provided with suitable gaskit to make it dust and vermin proof and the panel should have 1000 Amps aluminium bus -bar three phase & neutral mounted on insulators mounted on angle iron frame with legs 40mm x 40mm x 5mm including suitable PCC foundation in 1:2:4 type B-1 complete and as directed by Engineer -in-charge.

S&F in replacement of LT panel analog type auto time switch distribution panel board with 3 pole power contactor 32/40 Amps, and time switch, on/off switch, indicator and control wiring complete with one 4 pole suitable be MCB 40 Amps complete all as specified. Make: Indoasian Model TL040ABO or its equivalent Havells/HPL/Universal.

S&F in replacement of distribution panel board analog type auto time switch with 3 pole power contactor 63 Amps and time switch, on/off switch, indicator and control wiring complete with one 4 pole MCCB 63 Amps complete all as specified. Make: Indoasian Model TL065AB0 or its equivalent Havells/HPL/Universal.

S&F in replacement of distribution panel board analog type auto time switch with 3 pole power contactor 110 Amps and time switch, on/off switch, indicator and control wiring complete with one 4 pole MCCB 125 Amps complte all as specified and directed. Make: Indoasian Model TL110ABO or its equivalent Havells/HPL/Universal.

Excavation in trenches not exceeding 1.50 Mtrs wide and not exc. 1.5 Mtr deep and getting out in soft/loose soil for taking out/laying cable, poles &stay etc complete all as specified.

Returning, filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid and tested complete all as specified.

Removal of excavated surplus soil to a distance not exc 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified.

M&L for sand cushioning to under ground cable provided with layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable ie total 23 cm).

M&L for brick laid in trenches for cable protection of burnt clay sub class ‘B’ complete laid dry flat complete all as specified.

Taking out old unserviceable LT under ground cable of any type from trenches,pipes & poles complete all as specified.

S&F for LT cable PVC insulated under ground 1100 volt grade with stranded aluminium conductor of size 185 Sq mm 3.5 core in trenches /passing through pipes/ on poles etc complele all as specified.

S&F for LT cable PVC insulated under ground 1100 volt grade with stranded aluminium conductor of size 25 Sq mm 4 core in trenches /passing through pipes/ on poles etc complele all as specified.

S&F for LT cable PVC insulated under ground 1100 volt grade with stranded aluminium conductor of size 95 Sq mm 3.5 core in trenches /passing through pipes/ on poles etc complele all as specified.

S&F in replacement of control cable PVC insulated copper conductor 2.5 sqmm 3 core complete.

S&F in replacement of control cable PVC insulated copper conductor 4.0 sqmm 3 core complete.

S&F in replacement of electric motor 2 KW capacity 415 volts 50Hz ,900 RPM with gear 100 mm dia and chain machanism suitable to existing system to drive the high mast light up and down complete complete all as specified. Make: CG / Havells/ABB.

S&F in replacement of MCCB, 125 Amp, 3 pole, 415 volts, 16 KA repturing capacity complete all as specified.

S&F in replacement of MCCB, 100 Amp, 3 pole, 415 volts, fixed type, 16 KA repturing capacity complete all as specified.

S&F in replacement of MCB 4 pole,63A,10A complete all as specified.

S&F in replacement of MCB, TP , 63A,10KA complete all as specified.

M&L in replacement of gear assembly comprising of sets of gear to transfered the motion 90 deg fixed in mild steel housing as per existing hanger door motor and capable to bear the load of hanger door 20 mtr height including making suitable arrangement with chain and gear machinism to move the hanger door wheel at speed 0.5 Mtr to 1.0 Mtr per second incl testing complete all as specified. Make : ABB/Crompton/ Havells.

Supply and fixing in replacement of control panel of hanger door motor factory made comprising relay, contactor, ON-OFF push button, forward and reverse lever complete to operate hanger door motor including suitable capacity of power contractor 3 pole, auxllary relay, multi functional meter and ON/OFF indicator lamp to operate the 3 HP motor and comprising the followings :- (Make of contactor and relay : L&T, Schneider, Legrand). (a) Power contactor, 3 pole, 20 Amps -02 Nos (b) 8/11 pin auxillary relay - 02 Nos (c) Under voltage relay, 230 volts - 01 No (d) Multi functional meter - 01 Nos ( Make : L&T, Schneider, Legrand) ( e) ON/OFF indicator lamp - 01 set.

M&L in replacement of hanger door wheel 300 mm dia with gear arragement for chain machinism to move the door forward and reverse with shaft and roller bearing tightly sealed and equipped with high pressure and capable to bear the load of hanger door 20 Mtr height complete all as specified and directed by Engr-in-Charge.

Repair to unserviceable hanger door motor by removing the motor and gear assembly and re-fixing the same after repair and testing for smooth functining of hanger door including greasing & cleaning the guide rail complete all as specified. Note: Winding of motor and spare will be measured and paid separately.

M&L for winding of induction motor 2 KW capacity with super ennamelled copper wire of suitable gauge by opening startor and rotor assembly and re-assembling the same after repair complete all as specified.

S&F in replacement of ball bering of motor/ gear assembly complete all as specified.

S&F in repair submain wiring with two single core 6.0 sqmm PVC insulated FRLS multistrand but sheathed copper conductor cable 1100 volts grade IS-694 marked drawing through and including steel conduit with accessories such as bend, elbow & socket and one single core 4.0 sqmm FRLS multistrand copper conductor cable as continuous earth wire complete all as specified.

S&F in repair submain wiring with two single core 4.0 sqmm PVC insulated FRLS multistrand but sheathed copper conductor cable 1100 volts grade IS-694 marked drawing through and including steel conduit with accessories such as bend, elbow & socket and one single core 2.5 sqmm FRLS multistrand copper conductor cable as continuous earth wire complete all as specified.

S&F in replacement of RCCB 40 Amps, 240 volt, AC 100mA complete Make: Legrand Cat part No. 402493 or its equivalent in Havells/ Hagger.

S&F in replacement of distribution board two way with RCCB 63 Amp 240 volt, AC 100mA complete. Make: Legrand/ Hagger/ Schnieder.

Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fittings such as wooden terminal boxes, plastic laminated sheet cover including taking down of DB’s, meter board any type etc complete all as specified.

M&L for point wiring with single core PVC insulated but unsheathed 1.5 Sqmm FRLSH multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC conduit medium grade not less than 20 mm dia, ISI marked with all conduit fittings and fixing accessories including modular metal flush box with modullar plate for mounting switches, sockets, fan regulators, etc and earth wire singlle core PVC insulated but unsheathed multistrand copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLSH cable as continuous earth wire connecting to common earth dolly in concealed wiring system including making good the disturbed surface of wall for one light point controlled by one switch one way complete all as specified.

All as per item No 55 above but one socket outlet 5 Amp controlled by one switch on independent board.

All as per item No 55 above but one 3 pin 5Amps socket out let point on the same board controlled by one switch.

All as per item No 55 above but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete all as specified.

S&F in replacement of modular switch 1 way 6 Amps one module complete all as specified.

S&F in replacement of modular socket 6 Amps 2/3 Pin combined 02 module complete all as specified.

S&F in replacement of modular switch one way 16 Amps, one module complete, all as specified

S&F in replacement of socket modular type 16 amps, 2/3 pin combined 02 Module complete all as specified.

S&F in replacement of ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete all as specified.

S&F in replacement of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 12 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified.

S&F in replacement of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified.

S&F in replacement of sheet metal enclosure for distribution board TPN (when MCBs to be used ) 4 ways double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified.

S&F in replacement of MCCB, 3 pole 100A, 16KA, 415Volts complete all as specified.

S&F in replacement of MCB, SPN, 40A ,10KA all as specified.

S&F in replacement of MCB, SP, 6-32A ,10KA all as specified.

S&F in replacement of MCB, SP 40 Amp ,10KA all as specified.

S&F in replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB single pole 20 Amps complete all as specified.

S&F in replacement of indoor decorative LED battens- integrated type 20 watt 4 feet white fixture with extruded aluminium body, suitable for LED tube 20 watt , bipin holder, connector block, LED rod 20 watt etc complete with all accessories internally are wired and including connecting up with twin core copper conductor cable complete all as specified.

S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified.

S&F in replacement of decorative wall mounting champagne gold finish in durable plastic body & designer mesh in gold finish suitable for 14w retrofit bulb complete all as specified.

S&F in replacement of highly effiecient IP 66 LED street light 110 watt with aluminium pressure die-cast housing, toughened glass in the front and peanut lens for batwing light distribution, higher spacing between poles and maintenance free system including all installation arrangement requred at site by contractor without any extra cost complete all as specified.

SM CONSTRUCTION COMPANY

Sumit Enterprises

Commercial Traders

S.Rose Enterprises