Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.2 LAccepted-AOC N A | NA | NA | 121004 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹38.3 L+₹34,793.05 (0.92%)Rejected-Finance C O APERNA TRADERS COURT ROAD UDHAMPUR 182101 J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Rejected-Finance Due not Lowest | |
| 3 | L3₹38.4 L+₹43,978.95 (1.16%)Rejected-Finance | L3 | Rejected-Finance Due not Lowest | |
| 4 | L4₹39.0 L+₹99,710.25 (2.63%)Rejected-Finance H NO 327 KRISHNA ENCLAVE HIMMATGARH PO DHAKOLI ZIRAKPUR 140603 | S A S NAGAR | PUNJAB | 140603 | L4 | Rejected-Finance Due not Lowest | |
| 5 | L5₹39.6 L+₹1.6 L (4.32%)Rejected-Finance PEMASAR ROAD WARD NO 04 UDASAR BIKANER RAJ 334001 | BIKANER | BIKANER | RAJASTHAN | 334001 | L5 | Rejected-Finance Due not Lowest |
Tender Value
₹43.7 L
EMD Value
₹87,340
Closing Date
15 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (N) BIKANER
GE (N) BIKANER Rajasthan
SPL REPAIR TO MD ACCN BLDG NO P 24 1 TO 10 AT OLD UMRAO COLONY UNDER GE N BIKANER
2024_MES_660290_1
GE (N) BKN-TOKEN/01/2024-25
Open Tender
Miscellaneous Works
Item Rate
270 days
GE (N) BIKANER
As per Tender Documents
6 documents required · 6 mandatory
₹500
GE (N) BIKANER
₹87,340
Yes
14 Oct 2024
18 Jun 2024
22 Jul 2024
18 Jun 2024
15 Jul 2024
2 Jul 2024
Amount
Demolition of cement conc. In any description and inc any position not otherwise specially provided complete all as specified and directed
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
Dismanting floor, hearth or wall tiling including cement mortar bedding and removal of rubbish out of the premises.
Taking down cement plaster on brick or stone walls, including raking out joints, hacking for key, scrubbing down with water etc.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) size n.exc 1.5 sqm each.
Taking down old rusted and damaged steel window /vents incl.guard bar and grill where exists of size not exc.1.5 sqm each all as spcd.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) size exc 1.5 sqm and n.exc 4 sqm each
Taking down shutters of any description n exc 1 Sqm each pane
Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each.
Taking up or down steel tubing 15 mm dia and connections and stacking neatly for offering credit.
Ditto all as per item N 10 but 20 mm dia.
S&F 1.25 mm thick Pressed steel frames of size 125mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns as directed by engineer in charge.
S&F 1.25 mm thick Pressed steel frames of size 105mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns as directed by engineer in charge.
S&F Second class hard wood plain, framed, panelled shutters 35mm thick, (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered partcile board medium density wood particle board with commercial faces venners supplied and fixed to chowkats as directed by engineer in charge.
S&F Second class hard wood, glazed and skelleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc without sash bar, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, size of members as directed supplied and fitted to chowkats as directed by engineer in charge.
S&F Stainless steel wire cloth o.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples as directed by engineer in charge.
S&F in repair Stainless steel wire cloth o.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples as directed by engineer in charge.
Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube suppling & fixing in opening all as specified and as directd.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bttom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, Panneling of plain color PVC sheet to be fitted in the MS frame welded /sealed to the stiles &rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site all as specfied and as directed.
S&F Butt hings, 100 mm long, extructed aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 as directed by engineer in charge.
S&F Extruded aluminium alloy handles, 100 mm long, fabricated type anodised as directed by engineer in charge as directed by engineer in charge.
S&F Aluminium, anodised , 100 mm long, barrel tower bolts of extruded section and fixed as directed by engineer in charge.
S&F 100 mm long, Butt hinges, Stainless steel, ISI marked complete all as specified and as directed by Engineer-in-Charge.
S&F in 250 mm long sliding door bolt, plate type, mild steel, stove enamelled black with bright bolt of not less than 12 mm dia with & including a minimum of six bolts and nuts, four on bolt plate and two on staple plate, ISI marked complete all as specified and as directed by Engineer-in-Charge.
S&F 150 mm long, mild steel, barrel tower bolt, stove enameled black with bright bolt, ISI marked complete all as specified and as directed by Engineer-in-Charge.
S&F 150 mm size mild steel, stove enamelled black, pressed handles, oval type, ISI marked complete all as specified and as directed by Engineer-in-Charge.
M&L Mild steel, 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed as directed by engineer in charge.
M&L Mild steel work as in hold fasts, clamps, bands, straps etc conforming to Fe 410-0 as directed by engineer in charge.
S&F Prelaminated partical board 18/19mm medium density ,prelaminated with one side with decorative choice laqmination and other side balancing with white lamination fixed with screws as in shelves to kitchen almirah and cub board fixed in repair complete all as specified and directed by engineer in charge .
S&F in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboutery with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm 330 mm x 160mm complete all as specified and directed by engineer in charge .
S&F in repair Stainless steel plate rack, tubular type, with fixing arrangement 900mm x 600 mm size complete all as specified and directed by engineer in charge .
S&F curtain rods, 25mm dia mild steel, chromium plated including brackets, stops etc and fixed in repairs as directed by engineer in charge.
S & F glass corner of size 300mmx300mm with 5.5 mm thick glass and steelness steel clip and steelness steel railing allround the shelf complete all as specified and directed by engineer in charge .
M&L Non skid coloured Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors over and including 15mm thick screeding in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete as directed by engineer in charge.
Glazed ceremic tiles coloured 450X300mmX7mm/350x250x7 mm thick coloured,set and jointed in neat cement slurry and pointed in white cement or coloured to match colour matching with floor tiles as on vertical surfaces laid over & including 10mm thick cement screed in 1:4 as directed by engineer in charge.
M and L for coloured Non skid ceramic tiles exceeding 0.11 sqm but not exceeding 0.18 sqm 7 to 8mm thick in floors set and jointed in neat cement slurry and pointed in coloured cement to match the floor laid over & including 15mm thick screed in cement mortar 1:6 as directed by engineer in charge.
Ditto all as per item No 37 above but on vertical surface over and including 10 mm thick rendering in CM (1:4).
M and L for 20mm thick granite (of any type) work in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar 1:4 over and including 20 mm screed in CM1:6 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as specified and as directed by enineer bin charge.
Moulding/Rounding (making full moulding) to edges of kota/marble stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified & as directed.
M & L PCC 25 mm thick 1:2:4 type B0 (12.50 mm graded aggregate) in any position in ground floor/roof complete all as specified and as directed by engr-in-charge.
M&L 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate finished even and smooth without using extra cement complete all as specifed and as directed by engineer in Charge.
PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring jointed fixed to walls as directed by engineer in charge.
PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring jointed fixed to walls as directed by engineer in charge.
PVC (SWR) bends any radius 75mm bore as directed by engineer in charge.
PVC (SWR) bends any radius 110mm bore as directed by engineer in charge.
PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement as directed by engineer in charge.
M&L in repair 100 mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 as specified and as directed by Engineer in charge.
S&F in repair 150 mm Floor door stoper of aluminium alloy and insulation and tounge, anodised with`hard steel spring in floor complete all as specified and as directed by Engineer-in-Charge.
M& L GI Tubing, medium grade galvanised, 15 mm bore with all fittings and fixed to walls and ceilings or laid in floors as directed by engineer in charge.
Refixing old GI tubing with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm as directed by engineer in charge..
M& L GI Tubing , medium grade galvanised, 20 mm bore with all fittings and fixed to walls and ceilings or laid in floors as directed by engineer in charge.
Refixing old GI tubing with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm as directed by engineer in charge.
Dismantling Rotational Moulded plyethyelene water strogr tank of capacity exc 250 lit but not exc 500 lit and removing to store complete all as specified and as directed by Engineer-in-Charge.
M&L Rotational moulded polyethylene water storage tanks of capacity 500 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by Engineer-in-Charge. (Notes : (i) The water storage tanks shall be 2 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements and as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.)
Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed fixed in repair.of 20mm Make : Prayag or equivalent.
S&F in repair vitreous china wash down water closet pan with fixing bolts, trap (pedestal pattern), white, (excluding flushing cistern and flush pipe) complete fixed in repairs as directed by engineer in charge.
Supply and fix in repair vitreous china wash hand basin flat back size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand etc complete fixed in repairs as directed by engineer in charge.
S & F in repair PVC valveless syphonic action type flushing cistern, 10 ltr capacity low level , white with inlet, ball valve, float and handle including brackets as directed by engineer in charge.
S&F in repairPVC connections 15 mm size with PTMT nuts of length 450 mm as directed by engineer in charge.
S&F in repair Brass Chromium plated tubular towel rail, 20 mm dia D type 60cm long between flanges as directed by engineer in charge.
S&F in repair Bib tap 15 mm dia, fancy type, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe as directed by engineer in charge.
S&F in repair Stop valve, 25 mm dia, fancy type, Chromium plated, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions as directed by engineer in charge.
S&F in repairPillar taps, 15mm dia, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe as directed by engineer in charge..
S&F in repair Brass chromium plated shower rose 125 mm size including fixing to steel pipe or union fixed as directed by Engineer in charge .
S&F in repair angle valve cast copper alloy fancy type CP with long shank and cup and screwed for 15 mm iron pipe fixed as directed by Engineer in charge..
S&F in repair grating 75mm dia of stainless steel with and without hole having minimum weight 75 gm complete all as specified and directed by Engineer-in-Charge.
S&F in repair grating 100 mm dia of pvc with and without hole having minimum weight 75 gm complete all as specified and directed by Engineer-in-Charge.
S&F PVC Waste pipe 32mm/40 mm for WHB /sink with coupling fixed in repairs as specified and as directed by Engineer in charge.
Rendering 15 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished fair and even as directed by engineer in charge.
Rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even as directed by engineer in charge.
Rendering 5mm thick on fair faces of conc. Surfaces in cement mortar 1:3,even and smooth w/o using extra cement as on ceiling as directed by engineer in charge.
M&L for preparing new surface of wood of any desc over 10cm width or girth and applying two coats of synthetic enamel paint .over pink primer as directed by engineer in charge.
M&L incl preparing new surface of steel of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide as directed by engineer in charge.
M & L for preparation of old surfaces by complete removal of existing treatment of painted wall incl pillar etc by mechanical equipment like electric wall sander and applying two coat of exterior emulsion/ weather proof exterior grade paint of first quality by using over a coat of primer incl sealing the cracks all as specified in manufacturers instruction Make STP Ltd (Shallcry-215)/ Asian Paint (Apex Ultima)/ Berger Paint (Weather coat long) all as specified and directed by GE.
M & L for preparation of New surfaces by complete removal of existing treatment of painted wall incl pillar etc by mechanical equipment like electric wall sander and applying two coat of exterior emulsion/ weather proof exterior grade paint of first quality by using over a coat of primer incl sealing the cracks all as specified in manufacturers instruction Make STP Ltd (Shallcry-215)/ Asian Paint (Apex Ultima)/ Berger Paint (Weather coat long) all as specified and directed by GE.
Preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over a coat of wall care putty complete all as specified and as directed by Engineer-in-Charge.
M&L incl Preparation of old plastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted complete all as specified and as directed by Engineer-in-Charge.
Dismantling strucural steel work including door gates but excluding framed truss etc as directed by engineer in charge.
M&L for MS framed work as steel gates, chowkhats and other similar work of angle or other section with gusset plates rails, braces etc complete driling for fixing of steel sheeting or other covering etc, confirming to Fe 290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.
M&L fot ATT Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors as directed by engineer in charge.
M&L for ATT Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. as directed by engineer in charge.
S&F aluminium frame powder coated of any colour as approved (Thickness of powder coating not less than 50 micron) for doors, windows, ventilators, partitions, with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed. Note : Frame to walls etc shall be fixed with PVC rawl plugs and steel screws of length not less than 75mm at places as directed. Quoted rate shall deemed to include the same as directed by engineer in charge.
S&F aluminium window and ventilator shutters, powder coated of any colour as approved (Thickness of powder coating not less than 50 micron), side hung type without sash bars, aluminium sections including necessary joining cleats, glazing clips, powder coated aluminium snap beading, screws, with aluminium grills complete all as specified & as directed. Note : Glass and rubber neoprene packing / rubber gasket shall be measured and paid for separately as “Supply only” under respective item of this Schedule.
Supply only 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any thickness in each pane for metal frames complete all as specified.
Dismantling of Roof tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed by Engineer-in-Charge.
Demolition of lime concrete of any description over roof slab complete all as specified and as directed by Engineer-in-Charge..
M&L for 10 mm thick Rendering in cement mortar 1: 4 on concrete surfaces, finished Fair & even including mixing water proofing compound as per manufacturer's instns( WPC to be measured separately as supply only)
S&F Preparing surface and cleaning of concrete slab by wire brushing and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 0.40 Kg per sq m including cleaning surfaces complete all as specified and as directed by Engineer-in-Charge
M&L forAPP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete as directed by engineer in charge.
M&L Lime concrete terracing as in roof complete all as specified and as directed by Engineer-in-Charge.NOTE:- For lime concrete, mudia kankar (source : NAL) and Kolayat coarse sand in lieu of brick aggregates and Surkhi respectively as specified in MES schedule Part-I shall be used.
M&L 40 mm thick brick tiles bedded on 10mm thick CM 1:6 and joints grouted flush in cement and sand mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed by Engineer-in-Charge.
Ditto all as per Srl item No 92 but except tiles
M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in filling in chowkats, hold fast block etc. complete all as specified and as directed by Engineer-in-Charge.
M&L welding in repairs not exc 2.5 cm in length and not exc 6 mm thick of metal complete all as specified and directed by Engineer-in-Charge.
M&L 18-20 mm thick single piece machine cut kota stone slab as in flooring/steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
M&L 18-20 mm thick single piece machine cut kota stone slab on vertical surface and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
Supply only liquid integral water proofing compound ISI Marked complete all as specified and as directed by Engineer-in-Charge.
Dismantling and disconnecting of existing CI soil vent pipe upto75/ 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories.
S & F 100 mm dia (Spun pipe) Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.
S & F 100mm dia (Spun pipe) Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to walls with & including fixing clamps complete all as specified and directed by Engineer-in-Charge.
Ditto all as per Srl item No 101 but except Pipes
S & F 75mm dia (Spun pipe) Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.
S & F 75mm dia (Spun pipe) Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to walls with & including fixing clamps complete all as specified and directed by Engineer-in-Charge.
Ditto all as per Srl item No 104 but except Pipes
Extra over cast iron pipe and fittings if lead joint is provided in lieu of cement joint for 75 mm pipe complete all as specified and directed by Engineer-in-Charge.
Extra over cast iron pipe and fittings if lead joint is provided in lieu of cement joint for 100 mm pipe complete all as specified and directed by Engineer-in-Charge.
S & F in 100 mm dia branch piece single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed by Engineer-in-Charge.
S & F in 75 dia branch piece single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed by Engineer-in-Charge.
S&F in 75 mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete complete all as specified and directed by Engineer-in-Charge.
S&F 75 mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) without oval access door complete complete all as specified and directed by Engineer-in-Charge.
S & F 100 mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete complete all as specified and directed by Engineer-in-Charge.
S & F 100 mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) without oval access door complete complete all as specified and directed by Engineer-in-Charge.
S & F 100 mm bore CI tee (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete complete all as specified and directed by Engineer-in-Charge..
S & F , 100 mm CI bends (any radius) with duck's foot or heel rest complete complete all as specified and directed by Engineer-in-Charge.
S & F for cast iron vent cowls 100 mm dia complete complete all as specified and directed by Engineer-in-Charge.
S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof 75 mm bore complete all as specified and directed by Engineer-in-Charge.
S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof 100 mm bore complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:4:8 type D2 using 40 mm lean concrete graded crushed brick aggregate as in Sunken portion, surroundings of WC seats and similar works, complete all as specified & as directed as directed by engineer in charge.
M&L for rendering 10mm thick in cement mortar 1:3 on fair faces of brick masonry or concrete surfaces of walls in Sunken portion, mixed with integral liquid water proofing compound as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified.Note : Supply only integral liquid water proofing compound shall be measured and paid for separately as directed by engineer in charge.
M&L for removal of loose concrete and cleaning the surfaces and filling the cracks with Polymer modified mortar using Dr Fixit Pidicrete URP or other equivalent product as approved by GE and thereafter applying two coats of Dr Fixit Bathseal WPC or other equivalent product as approved by GE in Sunken areas complete all as per manufacturer’s instructions, specified & directed. Note : Where contractor desire to use equivalent product of Dr Fixit Pidicrete URP and Dr Fixit Bathseal WPC, he shall submit the technical literature of equivalent products to establish the equivalency of products to the entire satisfaction of GE and both products shall be of same manufacturer as approved by the GE.
Demolition of brick work built in cement mortar including all quions arches pillars etc as directed by engineer in charge.
M&L for Fly ash Brick work with sub class ‘B’ old burnt brick , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete as directed by engineer in charge.
Demolition of Reinforced cement concrete of any description and in any position as directed and specified by engineer -in-charge
M&L RCC Design Mix of M-25 Grade for Chajja as specified and as directed by Engineer in charge.
M&L RCC Design Mix of M-25 Grade for Chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; RCC water tanks upto 1500 litre as specified and as directed by Engineer in charge.
M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as directed by Engineer in charge
Ditto,all as per item no 127 above but 6mm to 8mm dia as directed by engineer in charge.
Ditto,all as per item no 127 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binder as directed by engineer in charge.
S&F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick as specified and as directed by Engineer in charge.
S&F Formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing) as specified by Engineer in charge.
M&L for Structural design for Roof Slab, Beams, Chajja and other connected RCC members required to be re-constructed under this Schedule with & including vetting of structural design from approved Govt Engineering College/NITTTR/CBRI, complete all as specified and as directed. Notes : (i) Tenderer shall carryout the site visit to ascertain the size of slab, other RCC members, arrangement of rooms, etc required for design purpose.(ii) Four sets of Structural drawings shall be provided to GE by the contractor duly vetted as above as directed by Engineer in charge.
M&L, for Preparing surfaces of plaster or unplaster new and applying three coat of white wash on ceiling as directed by engineer in charge.
M&L, for Preparing surfaces of plaster or unplaster new and applying two coat of white wash on wall as directed by engineer in charge.
M&L for Preparing old decorated surfaces of wall and applying one coat of white wash as directed by engineer in charge.
All as per item No 135 above but on ceiling as directed by engineer in charge.
Supply only Neoprene/ EPDM rubber gasket as specified and as directed by Engineer in charge.
S&F in 100 mm long, Butt hinges heavy weight, cold rolled mild steel, and fixed, ISI marked complete all as specified and as directed by Engineer-in-Charge.
Dismantling of stone slab and tiles of any description or thickness in floor, apron etc laid bedded and pointed in any mortar as directed and specified by engineer in charge
Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, laying of GI tubes etc and getting out in loose/soft soil complete.
Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete.
Removing excavated soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point
Demolition and breaking up drain pipes (SGSW, AC or RCC) of internal dia 150 mm, set in cement mortar complete.
M&L for Concrete bed to drain pipes 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D2 using 40mm graded stone aggregate complete.
M&L for Salt glazed stoneware drain pipes 150mm bore, grade ‘A’, laid in trenches and jointed as specified complete.
M&L for Salt glazed stoneware gully traps of size 150 mm x 150 mm, square or round mouthed, type ‘P’ complete.
M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete.
M&L for Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in surface channels and drains complete.
M&L for Providing precast reinforced cement concrete 1:2:4 type B-1 using 12.5 mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete (reinforcement to be measured separately)
M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, bed blocks, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete.
Supply only Intigral water proofing compound ISI marked.
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil.
M&L for 100 mm thick PCC(1:4:8) type D-2 using 40 mm graded stone gregate as in sub base of floor finished even and rough complete all as specified.
Hardcore of Broken stone or boulders of gauge exc 63 mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface
M&L 60 mm thick factory made coloured glazed precast concrete interlocking paver block of grade M-35 confirming to IS 15658-2006 manufactured by vibratory process laid over sand cushioning complete all as specified & directed.
M&L for 25 mm Sand filling under floor,cushioning under interlocking tiles or in foundation complete all as specified.
M&L for Providing precast cement concrete 1:2:4 type B-0 using 12 mm graded stone aggregate in coping, plinth course, paraprts or roof kerbs, rounded or chamfered on edges and kerb stone including necessary form work specified and directed by Engineer in charge.
S&F 110 mm bore PVC pipe (SWR) as in weep holes complete all as specified
M&L for preparation of new concrete surfaces and applying two coat of synthetic enamel paint over a coat of primer as specified and as directed by engineer in charge.
Taking down carefully (aluminium) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as spcified and directed.
Taking down submain wiring Aluminium/ copper of any size including earth continuity condutor on teak wood or conduit and removing from site and making good the disturbed surface of wall etc complete all as specified and directed.
Taking down old U/S existing DB TPN 4 way and DB SPN 8 way including MCB/MCCB of any capacity and any size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed.
M & L for point wiring for one light/fan/bell/buzzer point controlled by one way switch with 1.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) including 1.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) as continues earth wire in green colour to coomon earth dolly laid/drawn into and including non metalic PVC concealed conduit (medium duty, ISI marked not less than 20 mm dia) with all fittings such as tee, bends etc all as per IS terminated in & including new modular metal flush boxes of requisite module concealed in wall for mounting fittings like modular Switches, sockets, regulators etc with and including modular cover plates with frame of requisite modules all as specified and as directed: Notes:- (i) Cost of cutting/leaving forming chases for conduit, sinking for metal flush boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) The quoted rates of this item shall deemed for include for modular metal flush boxes of requisite module and modular cover plate with frame of requisite module of colour as approved by GE
(a) One pin 5 amps socket point on the same board with other switches complete
(b) One 3 pin 5 amps socket on independent board.
Ditto all as per item No 163 here -in- before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.5 sqmm single core PVC insulated and and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) including 2.5 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed .
Ditto all as per item No 163 here -in- before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 4.0 sqmm single core PVC insulated and and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) including 4.0 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed .
S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.
S&F switch Modular type, 16 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.
M&L socket outlet 3 Pin 6 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.
M&L socket outlet 3 Pin 6/16 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.
S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed by engineer-in-charge.
S&F ceiling rose, surface backelite , three terminal AC, 230 volt complete all as specified.
supply and fixing Bell push, flush type, 5 amp 230V AC 50 Hz for complete all as specified and directed by Engr-In-Charge.
supply and fixing Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed by Engr-In-Charge.
S&F LED tube light fitting, 1x 20-22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge.
Supply and fixing LED mirror light fitting , type with high out put diffuser 2 feet, 5watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply & fix LED bulk head ,09W / 10 W, IP65 diacast aluminium housing powder coating finished > 0.9 complete all as specified and directed by Engineer-in-charge.
M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
S&F GI bracket made out of 40 mm bore GI pipe light grade /medume grade, ISI marked, medium grade 1.2m long bent to shape suitable for fixing of street light fitting including with 2 Nos MS clamps made with 40x3mm flat iron, bolts, nuts, washers etc including two coats of synthetic enamel paint over one coat of zinc chrome primer and fixing on electric pole complete all as specified and as directed by Engr-in-charge.
Taking down fan,sealing cable end, dismantling blades of any make, any sweep, and refixing after necessary repairing such as winding of motor, replacement of capacitor & ball bearing of ceiling fan, cleaning all dust & painting with existing colour synthetic enamel paint by spraying including filling cavities with filler,one coat including writing MES No. all as specified and directed by Engr-in-charge
supply and fixing fan step regulator modular type,120W -2 module electronic socket type five step controlled 230V AC 50 Hz for complete all as specified and directed by Engr-In-Charge.
Taking down and refixing water heater storage type of 25 ltrs capactiy and 1500 watts, BEE Star rated-5, with glass line inner shell with Hot & Cold pipe, water connection pipe, electric connection and necessary repairing/replacement of inner tank, siphon assembly, glass wool, thermostate switch, heating element including washers, 3 core PVC insulated copper conductor cable etc including fixing arrangement complete all as specified and directed.
S&F sheet metal enclosure MCCB/MCB DB, double door, vertical TPN 4 way with 200 Amps rated busbar all as specified and as directed.
S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.
S & F MCB SP, 5-32 Amps , 240 volts, breaking capacity 10KA complete all as specified and as dircted by Engr-in-charge.
S & F MCB DP, C CURVE 40 Amps , 240 volts, complete all as specified and as dircted by Engr-in-charge.
S&F MCCB 4 Pole, 415 volts, 16 KA, 100 Amps complete all as specified and as directed by Engr-in-charge.
Taking dowen and refixing tamper proof energy meter electronic type single phase 10-60 Amps current rating single phase 230V AC with electric connection and necessary fixing arrangement complete all as specified and directed.
M&L for submain wiring using 2 runs of single core FRLS PVC insulated, unsheathed stranded copper conductor cable of size 2runs of 6 Sqmm of voltage rating 1100V for Single phase & neutral, drawn in and including concealed PVC conduit of dia not less than 25 mm dia with standard acessories, along with two run of FRLS PVC insulated, unsheathed, stranded copper conductor of size 2x 6.0 Sqmm as earth continuity conductor all as specified and directed(Note-2 runs of single core FRLS PVC cable 6sqmm for Single phase & neutral with Two run of earth conductor as earth and conduit shall be measured as one unit)
M&L for Earthing complete with galvanized steel earth plate electrode 60cm x60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level connecting to the galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanized iron and steel earth wire protected by provision of GI mediumgrade pipe 15mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering perforated at bottom, 1.75meter long placed on top edge of earth plate, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate No -5 of SSR 2009 Part-I and connecting to Lighting protection earth test points all as specifed and directed including testing on completion.
Supply & Laying & commissining of LT UG cable XLPE sheathed PVC insulated, screened PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volts grade, laid in tranches, in GI pipe, including brass cable glands, clamps etc of size 3.5 core x 50 Sqmm complete all as specifed and as directed. Make : Polycab/KEI/Havells Note: Earthwork, sand cushioning, bricks, GI pipe, etc will be measured and pad under appropriate items.
Supply and laying bricks (old size) for cable protection by using common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry flat across length of the cable with width of the trenches equal to length of bricks and all as directed.
M&L for Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 23 cm spread thickness (8 cm in depth before laying the cable and 15 cm in depth after laying the cable) and consolidated (punned) upto 180 mm thickness, complete all as specified and as directed. Note : For the purpose of payment, punned thickness of sand cushioning only shall be measured and paid for.
Supply and fixing GI Pipe light grade Size 80 mm bore with all fittings for passing of cables fixed to pole/wall/laid under floor or roads including all fixing accessories complete for protection of cable all as specified and directed. Make: Jindal/ Bansl/Tata
Supply, laying and jointing GI tubes, medium grade40mm dia in lengths with screwed and socket joints together with all galvanised steel fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc fixed complete laid in trenches/wall complete all as specified and directed by Engr-in-charge for the following sizes:-
Supply, laying and jointing GI tubes, medium grade 25mm dia in lengths with screwed and socket joints together with all galvanised steel fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc fixed complete laid in trenches/wall complete all as specified and directed by Engr-in-charge for the following sizes:-
Supply, laying and jointing GI tubes, medium grade 20mm dia in lengths with screwed and socket joints together with all galvanised steel fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc fixed complete laid in trenches complete all as specified and directed by Engr-in-charge.
Cutting existing steel tubing for alterations or additions done in position without taking down for 10mm to 40 dia pipe (Each cut measured)
S&F Gun metal gate valve 40 mm bore with iron wheel head screwed both ends for iron pipes complete all as specified and directed for the following sizes-
S&F Gun metal gate valve 25mm bore with iron wheel head screwed both ends for iron pipes complete all as specified and directed for the following sizes-
S&F Gun metal gate valve 20mm bore with iron wheel head screwed both ends for iron pipes complete all as specified and directed .
Materal and labour for construction of brick masonary valve pit chamber of size 900x900x600 mm (Internal dimension) using sub class ,B, bricks complete, earth work, PCC (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation, brick masonary sub class bricks 23 cm build n cement mortar and below ground level PCC with 1:2:4 type B2 using 20mm grade stone aggregate, copng 50 mm thick including frame of size 75x75x6mm made of angles iron and chamber cover made of MS sheet of 4 mm thickness double leaf including MS hinges locking arrangement with provision of locks and keys, painting of the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation, returning & filling & removing of surplus soil etc complete all as specified and as dircted by Engineer in Charge.
KAMLA CONSTRUCTION COMPANY (BID ID -3048666)
SHREE JASWANT CONSTRUCTION COMPANY (BID ID -3061991)
G S BUILDERS AND ENGINEERS (BID ID -3053601)
SUBHAM ENTERPRISES (BID ID -3062329)
BIG B CONSTRUCTION (BID ID -3050788)
A.S. CONSTRUCTION COMPANY (BID ID -3047906)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .