CERTAIN REPAIR TO BLDG THROUGH DAY TO DAY MAINT INCL PLUMBING AND SANITARY FITTINGS TO DOMESTIC AREA AT AFS UNDER GE (AF) JORHAT

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 complete all as specified and as directed.

M&L for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, and fixing in opening as per specification and drawing shown in SSR Part-II as approved complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, and fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F 125mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100mm stainless steel butt hinges, medium weight, cold rolled complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, cast type anodised including the screws complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, qulaity or description) as in metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and as directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F 4mm thick sheet glass, figured glass, pin headed type, glazing with oil putty in squares n exc 0.5 sqm each pane complete all as specified and as directed.

S&F as in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in window and door as in old door / window complete all as specified and as directed.

S&F as in repairs 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

All as per per Serial item No. 11 here-in-before but of size 200mm

S&F as in repairs 100mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised, type B-21 complete all as specified and as directed.

S&F as in repairs 100mm stainless steel butt hinges medium weight, cold rolled complete all as specified and as directed.

S&F as in repairs 150mm size extruded aluminium alloy handles, cast type, anodised including the screws complete all as specified and as directed.

S&F as in repairs 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S&F as in repairs for 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu.cm each complete all as specified and as directed.

S&F as in repairs for 100mm long hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F as in repairs door closer hydraulically regulated, designation No. 03 universal type, suitable for door shutters 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

S&F as in repairs floor door stopper of 150mm aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as per specified and as directed.

M&L for coloured non skid ceramic colour tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for coloured non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles as on vertical surfaces of size 300x200x7mm / 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed.

M&L for 25mm thick plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in bases of floors complete all as specified and as directed.

M&L for 50mm thick plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection, etc. complete all as specified and as directed.

Demolition stone slabs and tiles of any description or thickness in floors aprons, laid and bedded and jointed in cement mortar complete all as specified and as directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed or bedding layer 15mm thick in cement mortar (1:6) complete all as specified and as directed.

S&F as in repairs sinks made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe of overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and as directed.

S&F as in repairs sinks with drainage board made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe of overall size 915mmx460mm, bowl size 410mmx330mmx160mm complete all as specified and as directed.

S&F as in repairs kitchen plate rack, made of stainless steel 1.0mm thick including fixing, overall size 915mmx915mmx255mm complete all as specified and as directed.

Demolition of reinforced cement concrete for roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.

M&L for RCC (1:2:4) type B-1 (using 20mm graded stone agregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) and making flat rough finished surfaces of concrete complete all as specified and as directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Dismantling water tanks of capacity exc. 250 litres and not exc. 500 litres complete all as specified and as directed.

S&F rotational moulded polyethylene (HDPE) water storage tank of size 500 litre capacity (cylindrical vertical with closed top), black in colour, three layered construction, hoisted and fixed in position all specified in MES schedule Part-I complete all as specified and as directed.

Dismantling water tanks of capacity exc. 500 litres and not exc. 1000 litres complete all as specified and as directed.

S&F rotational moulded polyethylene (HDPE) water storage tank 1000 litre capacity (cylindrical vertical with closed top), black in colour, three layered construction, hoisted and fixed in position all specified in MES schedule Part-I complete all as specified and as directed.

Disconnecting existing tanks of (exc. 250 & n. exc. 500 litres in capacity), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. Note : Cleaning, repairing, etc. shall measured and paid separately.

Cleaning and removing all scale and dirt, etc, from tanks (exc. 250 & n. exc. 500 litres in capacity) and from mouths of circulating pipes, etc. complete all as specified and as directed.

S&F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) complete all as specified and as directed.

S&F as in repairs 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) complete all as specified and as directed.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as direcetd.

S&F 110mm bore PVC (SWR) bends any radius provided with access door complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F 20mm bore GI tubing, "medium grade", galvanised, with all fitting & fixed complete to walls, ceiling or laid in floors complete all as specified and as directed.

Re-fixing only steel tubing of 20mm bore, any grade, to walls and ceiling or laying in floors complete all as specified and as directed. Note : Old serviceable pipes obtained from dismantling shall re-use.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed

S&F 15mm bore GI tubing, "medium grade" galvanised, with all fitting & fixed complete to walls, ceiling or laid in floors,complete all as specified and as directed.

Re-fixing only steel tubing of 15mm bore, any grade, to walls and ceiling or laying in floors complete all as specified and as directed. Note : Old serviceable pipes obtained from dismantling shall re-use.

S&F as in repairs 15mm dia bib taps, cast copper alloy, fancy type, chromium plated with capstan head screwed down screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F as in repairs 15mm dia bib taps, standard of PTMT fancy type, any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm - 105 gms) complete all as specified and as directed.

S&F as in repairs 15mm dia stop valves, cast copper alloy, fancy type, chromium plated with with long shank and cup (concealed type) for iron pipe of 15mm bore of pipe complete all as specified and as directed.

S&F as in repairs for brass chromium plated shower rose of size 125mm with swivel joint including fixing to 15mm dia steel pipe or union complete all as specified and as directed.

S&F as in repairs PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32mm bore PVC flush pipe etc. complete all as specified and as directed.

S&F for vitreous china squatting pan, ‘Orissa’ pattern, of size 580x440mm white, as approved, with integral foot rests (excluding flushing cistern and flush pipe) including trap set and concrete including connection to trap, and to flushing pipe, anti syphonage pipe etc. complete including making ggod to floors with PCC bedding (1:5:10) type E-2 (using 40mm nominal brick ballast) and connection to trap with cement mortar and making good to floor including demolition of PCC/lime concrete bedding for existing pan complete all as specified and as directed.

S&F as in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S&F as in repairs plastic water closet seat cover (any colour) as approved closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F as in repairs PVC waste outlet pipe of size 32/40mm dia for WHB / kitchen sink including waste coupling complete all as specified and as directed.

S&F as in repairs PVC connections pipe of size 15mm with PTMT nuts of length 600mm complete all as specified and as directed.

S&F as in repairs 32mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/ 40mm-60 gms) complete all as specified and as directed.

S&F as in repairs 20mm dia tubular towel rail, 'D' type 60cm long between flanges brass chromium plated complete all as specified and as directed.

S&F as in repairs soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F as in repairs wash basins, vitreous china (flat back or angle back type) of size 580x450mm, white, including waste coupling fixed with 2 No. cadmium plated rag bolts of 10mm dia complete all as specified and as directed.

S&F 15mm dia pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

S&F as in repairs 15mm dia pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

S&F as in repairs 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

All as per Serial item No. 77 here-in-before but of size 15mm.

S&F as in repairs bathroom cabinet mirror (of approved pattern) of size 450mmx350mm regular size with mirror and PVC shelves complete all as specified and as directed.

Demolition of brick work built in cement mortar complete all as specified and as directed.

M&L for brickwork (old size) with sub class ‘B’ bricks, straight or curved on plan exc. 6m mean radius in half brick thick walls, built-in cement mortar (1:4) complete all as specified and as directed.

M&L for brickwork (old size) with subclass ‘B’ bricks, straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Taking down cement or cement lime plaster from brick walls, etc. including raking out joints, hacking for key scrubbing down with water etc. complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface of wall with cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 5mm thick rendering in cement mortar (1:3) on fair faces of concrete surfaces of ceiling, finishing even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound confirming to IS: 2645-1975 of approved make complete all as specified and as directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash on complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over and including one coat of primer complete all as specified and as directed.

S&F as in repairs powder coated aluminuium anodised pipe, 20mm dia as in curtain rod, fixed to brackets complete all as specified and as directed.

S&F as in repairs for 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Dismantling timber scantling, 40sq.cm and over in section, in any position, in unframed work complete all as specified and as directed.

M&L for 2nd class hard wood timber scantlings, clean sawn complete all as specified and as directed.

S&F as in repairs 15mm dia brass CP mixer for mixing hot & cold water, screwed down for iron pipe complete all as specified and as directed.

S&F as in repairs health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F as in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F grating round of size 100mm, PTMT (Minimum weight 25gms) complete all as specified and as directed.

S&F grating square of size 150mm, PTMT (Minimum weight 100gms) complete all as specified and as directed.

S&F PVC shelf wall corner of size 230mm with all fittings/brackets complete all as specified and as directed.

S&F door seal complete all as specified and as directed.

S&F as in repairs bottle trap of PTMT having minimum water seal of 25mm (Minimum weight 32mm-260gms/ 40mm-270 gms) of 40mm bore dia fixed in discharge pipe complete all as specified and as directed.

S&F as in repairs tank cover (lid) for 500 litres capacity with locking arrangement complete all as specified and as directed.

S&F as in repairs angle cock/stop valve, fancy type of size 15mm dia, cast copper alloy, chromium plated, high pressure with crutch handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F as in repairs fancy CP wall mixer (3 in 1 type) with provision for both overhead shower and hand shower with 115mm long bend pipe and wall flange complete all as specified and as directed.

S&F low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors, etc. complete all as specified and as directed. NOTE: The contract sum shall be derived by deducting the amount shown in Sch of Credit attached to this tender from total amount of Schedule 'A'/BOQ.

4S ASSOCIATES (BID ID -3295761)

M/S M R CONSTRUCTION & CO (BID ID -3294963)

PEE BEE INDIA (BID ID -3295039)

M/S GOPAL ROY AND CO (BID ID -3294852)

NIHAR ENTERPRISE (BID ID -3296533)

M/S P.G CONSTRUCTION (BID ID -3296458)

M/S AT DHAR AND CO (BID ID -3296502)

Bidder Name

NIHAR ENTERPRISE

A M CHOUDHURY AND CO

M/S P.G CONSTRUCTION

M/S GOPAL ROY AND CO

PEE BEE INDIA

M/S M R CONSTRUCTION & CO

M/S AT DHAR AND CO

4S ASSOCIATES