NIT NO:- 87/RMC/ZONE 08/2026 RAIPUR DATED– 01.04.2026

OFFICE OF THE MUNICIPAL CORPORATION RAIPUR , DISTT. RAIPUR(C.G)

NAME OF WORK : - Estimate for Dog Kennel in dog shelter house at ward no 02

PWD BUILDING SOR-2015

S.N. Item code Description and details of work No. L. B. D. / H. QTY. Unit Rate Amount

1 1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

1.1.1 In all types of soils.

2 3.1 Providing and laying nominal mix plain cement concrete with crushed

stone aggregate using concrete mixer in all works upto plinth level

excluding cost of form work.

3.1.2 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm

3 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.1.5 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).

4 7.4 Brick work with modular well burnt (open bhatta) clay bricks of crushing

strength not less than 20 kg/sqcm and water absorption not more than

25% in foundation and plinth in:

7.4.1 Cement Mortar 1:6 (1 Cement : 6 Coarse Sand)

5 11.3 Providing and making 15mm thick cement plaster on the rough side of

single or half brick wall of mix:

11.1.3 In cement Mortar 1:3 (1 cement : 3 fine sand)

6 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.1 In cement Mortar 1:3 (1 cement : 3 fine sand)

7 9.3 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.9.3.2 Electric resistance or induction butt welded tubes Grade-300 kg/sqm

8 10.12 Supply and fixing of polymer precoated galvalume profile sheets (PPGL) of approved size, shape and pitch of corrugation, total coated thickness (TCT) 0.60 mm +/- 5%, epoxy primer on both side of the sheet and colour polyester top coat 18-20 microns and 6-7 microns on bottom. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

9 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.

pati 60mmX5mmx1m) 18 0.20 2.38 8.57

10 19.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

9.4.3 25 mm nominal outer dia .Pipes. 1 2.50 2.50 mtr 199.00 497.50

11 19.17 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

19.17.3 25 mm nominal bore 1 1.00 each 432.00 432.00

12 12.9 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete.

13 12.7 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.

14 14.5 White washing with lime to give an even shade.

14.5.1 On new work (Three or more coats)

15mm plaster area 1.95

15 14.15 Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with: 14.15.1 On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

16 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint 2 1.80 1.45 5.22

Say Rs. (In Lacs) 20.07

Technically Sanctioned for Rs . . . . . . . . . .

Sub Engineer Assistant Engineer Executive Engineer

Municipal Corporation Municipal Corporation Municipal Corporation

Raipur ( C.G. ) Raipur ( C.G.) Raipur ( C.G. )