S.45 NCTPS II ES circle EM II Boiler Aux Maintenance S Dn I Unit I Replacement of HT Mill Motors Various capacity LT Motors including overhaul of LT motors and painting of HT Motors during Unit I AOH period 2025

Charges for leading, lifting, transporting of released Mill motors (1A&1J) From location to respective mill zone, lowering the motor by using required capacity tested wire rope slings & ‘D’-Shackles with help of existing electrical hoist etc., after inspection of motor bed bolt & nuts. (By leading, lifting, transporting and lowering the motor by using existing TNPGCL electrical hoist) and re-erecting by interchanging-1A&1J motors including T&Ps, consumables and Hydra charges

Charges for disconnecting the power cable,releasing the motor from its bed, lifting, lowering and transporting the motor to a convenient location, removing of coupling pulley, refixing of coupling pulley after over-hauling, transporting the motor to its location, lifting, lowering the motor and placing in motor bed and erection of motor, reconnecting the power cable and including coupling, alignment and coupling the motor with the compressor or pump( For the rating from 0.6 KW to 4.8 KW) [Guide/Support bearing motors-2,BCW-ECW-1no,ID LOP-2,FD LOP-2]

Charges for disconnecting the power cable,releasing the motor from its bed, lifting, lowering and transporting the motor to a convenient location, removing of coupling pulley, refixing of coupling pulleyafter over hauling, transporting the motor to its location, lifting, lowering the motor and placing in motor bed and erection of motor, reconnecting the power cable and including coupling, alignment and coupling the motor with the compressor or pump(For the rating from 4.81 KW to 15 KW) PA LOP-2, Mill LOP-9

Charges for releasing the motor from its bed, lifting,lowering and transporting the motor to a convenient location, removing of coupling pulley, refixing of coupling pulley after over hauling, transporting the motor to its location, lifting, lowering the motor and placing in motor bed and erection of motor and including coupling, alignment and coupling the motor with the compressor or pump CTP (45KW Condensate Transfer pump-1no, 30KW Air-pre motor -1no) including Hydra charges

Labour Charges for replacement of motor by spare motor 132 KW to 160 KW (Boiler Fill Pump) including Hydra charges

Dismembering motor from service by removing of hood, hand rail and earth plate and fixing of spare seal air fan motor including T&Ps, consumables and Hydra charges

Shifting of Seal-air fan motor&Boiler Fill pump from location to store/repair bay including Hydra charges

Charges for complete overhauling of motor including dismandling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling (Motor capacity ranges from 0.61 to 1.4 KW) [ID LOP -2, Guide/Support bearing LOP -2] including bearings,T&Ps, consumables

Charges for complete overhauling of motor including dismandling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling (Motor capacity ranges from 2.81 to 4.8 KW) [FD LOP - 2, ECW for BCW pump - 1] including bearings,T&Ps, consumables

Charges for complete overhauling of motor including dismandling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling (Motor capacity ranges from 4.81 to 7.5 KW) [PA LOP - 2] including bearings,T&Ps, consumables

Charges for complete overhauling of motor including dismandling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling (Motor capacity ranges from7.51 kw to 12 KW) [ Mill LOP - 9] including bearings,T&Ps, consumables

Charges for complete overhauling of motor including dismandling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling (Motor capacity ranges from 12.1 to 30 KW) [Air Pre-Heater -1] including bearings,T&Ps, consumables

Charges for complete overhauling of motor including dismandling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling (Motor capacity ranges from30.1 to 50 KW) [Condensate Transfer Pump-1] including bearings,T&Ps, consumables

Charges for complete overhauling of motor including dismandling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling (Motor capacity ranges from 100.1 to 160 KW) [Boiler Fill Pump motor-1, Seal Air Fan motor -1] including bearings,T&Ps, consumables

Charges for repairing & providing sleeves at DE & NDE bearing housing of Vacuum pump motor ,110KW,415V motor.Bearing size Seal Air Fan motor-6319 C3,6316 and Boiler fill pump-6319 C3,6219C3] including bearing sleeve materials, T&Ps, consumables

Charges for dynamic balancing of rotor 132KW seal air fan motor & 160KW Boiler fill pump motor.

Removing of NDE Motor Cover and cleaning of cooling tubes and fan inner area (HT Mill motor-9, FD motors-2 for painting work) including T&Ps, consumables

Charges for cleaning and painting two coats of any paint (Enamel paint of Siemens Grey - RAL 7032 for 9nos of HT Mill motors, 2Nos of FD motor, 2nos of ID motor, 2nos of PA motor) including T&Ps, consumables

Transportaion To and fro