SPECIAL REPAIRS TO BLDG NO E 2, 9 and 10 (STUDENT ACCN) AT NAGZEERA LINES OF HQ JL WING, THE INFANTRY SCHOOL, BELGAUM UNDER GE BELGAUM

Amount

M&L 2nd class hard wood timber scantling cleans sawn and fixed complete including Dismantling timber scantling 40 Sqcm and over in section, in any position for unframed work all as specified and directed .

All as per item No 1 above but except timber including Dismantling timber scantling 40 Sqcm and over in section, in any position for unframed work complete all as specified and directed .

Preparing surfaces of wood ,new or old of any description and girth and treated with two coats of creosote oil complete all as specified and directed .

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including Dismantling of asbestos cement (corrugated, semi corrugated, translucent etc.) sheets in roof coverings complete all as specified and directed .

S&F pre painted galvalume aluminium zink coating GI based plain steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, fixed with self tapping screws and washers including Dismantling of asbestos cement (corrugated, semi corrugated, translucent etc.) sheets in roof coverings complete all as specified and directed .

S&F mild steel trussed purlins, rafters, struts (beam, tee, angle channel or flat sections including distance pieces, cleats etc. conforming to grade Fe 410-W Gde E - 250 quality 'A' or Fe 310-0 and flate as in wind ties including Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed .

S&F mild steel frame work such as grills, gratings etc. With ends of bar shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed labusters, walk ways, railings, framewok of water tanks and similar work con-forming to FE 290. Gde-E-165 including Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed .

S&F Mild Steel work as in wind ties etc. conforming to Fe-290 Gde- E-165 including Dismantling structural steel work complete all as specified and directed .

M&L providing cement concrete 1:3:6 type C1 (Using 20mm graded aggregate in coping/bed plates eves filling in roof including necessary form work complete all as specified and directed .

S&F of aluminium composit pannel board 3mm thick fixed over existing wooden/steel frames with necessory frame work with screwing and scaffolding including dismantling boarding of any description fixed in any position with nails etc complete all as specified and directed .

M&L preparation of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

S&F PVC (SWR) eaves gutter Half Square/half rounded 150mm dia including Taking down eaves gutter pipes,rain water pipes (of any size and pattern) including fittings,head shoes,bends,swan neck etc complete all as specified and directed.

S&F PVC (SWR) pipes 110mm dia, single socketed in any length fixed to walls & jointed with solvent cement including Demolition/breaking up or down PVC /AC/CI/Cement drain pipe any size fixed in any position complete all as specified and directed .

S&F in repair PVC (SWR) bends any radius provided with access door 110mm bore complete all as specified and directed .

S&F High pressure steam cured (HPSC) non asbestos fibre cement building board 4mm thick in false ceiling with aluminum anodized snap grids of 60x60cm in ceiling with Tee section 35x25x1.25mm,angle section 25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying three coats of white wash on ceiling including Dismantling wall or ceiling boards or insulation boards/ slabs any thickness including cover fillets complete all as specified and directed .

M&L for providing roof treatment with APP modified water proofing membrane with the following specifications all as specified and as directed.

(a) Removing existing roof/ chajjas treatment of any description and thickness including taking down existing plastering/ concrete of any thickness and cleaning the top surface of RCC slab with wire brush including removal of debris outside of MOD premises.

(b) Brushing with neat cement slurry @ 3Kg/Sqm on cleaned RCC slab surfaces and rendering 10 mm thick in CM 1:3 mixed with approved water proofing compound and finishing surfaces even and smooth without using extra cement. Note: Water proofing compound will be measured and paid separately

(c) Preparation of plastered surfaces by removing dust, dirt & applying oil bound bituminous primer at 0.3 litre per Sqm & providing APP modified water proofing membrane 4mm thick and weight not less than 4.5kg/ sqm reinforced with non oven polyester mat weight not less than 160gms per Sqm including minimum 10cm side/ over laps & including applying a coat of blown hot bitumen grade 85/25 over membrane at 1.2kg per Sqm & on drying applying a coat of solar reflective bituminous aluminium paint at 0.1kg/sqm.

(d) Preparation of plastered surfaces by removing dust, dirt & applying oil bound bituminous primer at 0.3 litre per Sqm & providing APP modified water proofing membrane 4mm thick and weight not less than 4.5kg/ sqm reinforced with non oven polyester mat weight not less than 160gms per Sqm including minimum 10cm side/ over laps & including applying a coat of blown hot bitumen grade 85/25 over membrane at 1.2kg per Sqm & on drying applying a coat of solar reflective bituminous aluminium paint at 0.1kg/sqm.

(e) NOTE: APP modified water proofing membrane shall be of any one of the approved makes as specified here-in-after and shall conform to specifications given IS 16540-2017/ IS 16532-2017. Contractor shall produce necessary test certificate of the manufacturer to the Engineer-in-charge before incorporation in the work. Necessary independent tests shall also be carried out by the contractor without any extra cost to the Deptt as per relevant IS specifications and membranes with satisfactory test results shall only be incorporated in the work.

M&L pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded aggregate) exc 10 cm width and setting in CM 1:6 complete including Demolition of pre-cast concrete articles and precast concrete block walling all as specified and as directed.

M&L rendering 10mm thick in CM 1:6 on stone masonry surfaces and finished even and smooth w/o using extra cement including Taking down cement plaster on brick or stone walls built in cement mortar complete all as specified and as directed.

M&L rendering 15 mm thick in CM 1:4 on brick or concrete surfaces in two layers 5mm top mixed with water proofing compound over 10mm thick rendering on external wall surfaces of walling including Taking down cement plaster on brick or stone walls built in cement mortar complete all as specified and directed .

Supply only water proofing compound.

M&L for applying two coat of oil bound distemper over a coat of primer and JK / Birla wall care putty incl preparation of new plaster surface complete all as specified and directed .

M&L for preparing for new plastered surface of walls and applying two coats exterior emulsion paint (Apex ultima - Asian paint) over primer complete all as specified and directed .

Complete removal of existing treatment on wall with wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots and applying two coats of Oil Bound Distemper over a coat of primer and a layer of J K / Birla wall care puty complete all as specified and directed .

M&L for complete removal of old plastered/unplasterd surfaces of walls and brooming down and appyling two coat of exterior emulsion paint over primer (Apex ultima - Asian paint) complete all as specified and directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .

M&L non-skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, over 15mm screed bed of cement mortar 1;4 in floors etc set and jointed in neat cement slurry complete all as specified and directed .

M&L Glazed ceramic coloured tiles in vertical surface 450x 350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured in skirting/dado over and including rendering 10 mm thick in CM 1:4 on brick masonry walls as in backing coat of skirting, dado etc complete all as specified and directed .

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over rendering 10mm thick in cement morter 1:4 on other than fair faces of brick work or stone masonry surfaces in backing coat of skirting, dado etc, all as specifiedd and directed all as specified and directed

M&L cement concrete type C2 1:3:6 (40 mm graded aggregate ) 75 mm thick in plinth protection and finishing the cement concrete surface even and smooth without using extra cement including Demolition of 75 mm thick cement concrete in ground floors n exc 15cm thick unreinforced complete all as specified and directed .

Taking down chowkats with shutters exc 1.50 sqm but n exc 4 sqm each (w/o taking off shutters from the frame) complete all as specified and directed .

Taking down chowkats with shutters n exc 1.50 sqm each (w/o taking off shutters from the frame) complete all as specified and directed .

S&F Second class hard wood plain solid straight chowkat or frame rebated on the solid, wrought, framed rounded or chamfered put together with glue pinned at joints complete all as specified and directed .

S&F 2nd class hard wood 35 mm thick paneled door shutters any No of panel with panels of 12 mm thick veneered particle board, medium density with commercial face veneers fitted to chowkhat complete all as specified and directed .

S&F 2nd class H/W 35mm thick glazed & skelton shutters open rebated & prepared to receive glass gauze etc fitted with cut & mitred beads rebated sash bars any numbers for securing gauze etc divided into squares as specified in SSR Part-I section 8 caluse 8.24(a) complete all as specified and directed .

All as item No 35 above but if window,ventilator etc are provided with stiles and rails as specified in SSR Part-I section 8 caluse 8.24(b) complete all as specified and directed .

S&F Solid PVC frame (Single Rebated) of size 60 x mm 30 mm made out ofsolid PVC frame with homogenous fine cellular structure having smooth outer integral skin with suitablemetal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and as shown on drawing (Note: Door frame shall be water proof, termite proof, elegantand should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F Factory made solid PVC profiled panel door shutter 28 mm thick with integral skin as frame & 3 mm thick high pressure compact laminate on both side of approved colour as infill with 'C' type GI or 40x20x19 of MS pipe as stiffner and fixing in frame at site as per specifications and drawing.

M&L preparing surfaces of wood or wood based surfaces over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

M&L preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed .

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of apperture 1.18 mm fixed with tinned tack or galvanised wire stapples complete all as specified and directed .

S&F in repair galvanised steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm fixed in panel of joinery complete all as specified and directed .

S&F MS butt hinges cold rolled medium weight 100mm size complete all as specified and directed .

All as per item No 43 above but 75 mm size complete all as specified and directed .

S&F in repairs helical door spring MS 300mm long ordinary rat tail pattern spring including roller & roller plate complete all as specified and directed .

S&F 100mm long extruded section aluminium alloy anodised handles fabricated type complete all as specified and directed .

S&F 150 mm long extruded section aluminium alloy anodised handles fabricated type complete all as specified and directed .

S & F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and directed .

S & F Aluminium anodised barrel tower bolt of extruded section of size 100mm long complete all as specified and directed .

Supply and fix aluminium alloy anodised sliding door bolt 300mm long with hasp & sample (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and directed .

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane including Hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and directed .

Taking down carefully sub main wiring of any type and size and including dismantling of old U/S submain wiring of aluminium conductor cable of any size,complete all as specified and as directed.

Material and labour for point wiring with FRLS PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm nominal cross sectional area for phase & neutral in & including PVC CASING CAPPING of suitable size ISI marked with all accessories in wiring system & 1.5 sqmm green PVC insulated copper conductor connected to common earth dolly including provision of suitable size of incl 2nd HW board etc, complete all as specified and as directed. (a) one light point controled by one 1 way switch, all as specified and as directed.

All as described in item No. 53 but for one fan / exhaust point controlled by one switch and regulator.

All as described in item no 53 one 3 pin socket outlet, for independent socket 5 Amps point.

All as described in item No. 53 but for one 05 Amps socket outlet on the same board with other switches.

All as described in item No. 53 but wiring with 2.5 Sqmm PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductor PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

S&F modular switch piano type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed.

S&F modular switch piano type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed.

S&F modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed.

S&F modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified .

S & F modular fan regulator 120 Watt -2 Module 230 V, step type complete all as specified and directed.

S&F ceiling rose 3 terminal suitable for 230 volts AC supply, complete all as specified and as directed.

Material and labour for Sub main wiring of any type and size and provision of new sub main wiring with 2 runs of single core PVC insulated unsheathed multistranded copper conductor cables FRLS of size 6.0 Sq mm drawn through and including PVC casing capping of suitable size with all necessary fittings and provn of one run of 4.0 sqmm PVC insulated unsheathed multistranded copper conductor double core cable as earth continuity conductor and connecting to common earth dolly all as specified. Note :- 02 run of 6.0 sqmm and 01 run of 4.0 sqmm including 01 run of PVC CASING CAPPING will be measured as one length complete all as specified and directed.

S & F inverter LED INTEGRATED BATTEN tube light fitting type 20 watt with square profile and polycarbonated channel ,Lithium ion battery with charging time 8 to 10 hours and back up time upto 4 hours complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size of Make :Havells Pride PLUS INVERTER BATTEN of Model LHEXACP7FN1WO20 OR techno commercially equivalent model in Bajaj/CG/Philips complete all as specified and directed

Supply and fix in repairs LED INTEGRATED BATTEN T5 tube light fitting type 1x 9 /10 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core flexible FRLS PVC copper conductor cable of suitable size complete all as specified and as directed. Make : Havells cat part no LUMILINE PLUS: or techno commercially equivalent model in Bajaj/CG/ Philips/Wipro.

Supply & Fixing 1 feet LED 05 watts integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.Make :- Havells Lumifine plus or techno commercially equivalent model in Bajaj/CG/ Philips/Wipro.

S & F in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S & F in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete

S&F in repairs energy saving surface mounted, decorative oval bulk head edge-lit LED luminaire 10W, comprising of high brightness LEDs. comprising of high brightness LEDs complete with all accessories internally pre wired complete including provision of 10 Watts high brightness LEDs 6000K, suitable size wooden board with sunmica top and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block complete all as specified and directed. Make: Havells ENDURA RUGBY NEO N- IP65 or techno commercially equivalent in CG/ Philips/ Wipro

Taking down existing unserviceable / serviceable ceiling fan / exhaust fan from the location and setting aside for fixing /deposting to MES store yard complete all as specifed and directed

Supply and fixing ceiling fans complete with blades, down rods of suitable length of 20 mm dia medium grade GI pipe from top to bottom, and sensor enabled with remote control alongwith all accessories, 230 V, 1200 mm sweep, star rated with BLDC motor including taking down existing unserviceable ceiling fan from the location and setting aside for fixing /deposting to MES store yard complete all as specifed and directed Make:-Havells/Crompton/Orient Note:- Old ceiling fan shall be deposited in MES store yard

Supply and fix exhaust fan made of steel body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm with necessary grouting and fixing arrangements and provision of 3 core flexible copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed

Supply and fixing factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed on wall on sunmica board and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified & directed.

Supplying & fixing in replacement MCCB, 4 pole,100 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified.

Supply and fixing factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed on wall sunmica board and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified & directed Make - L&T / Legrand/ C&S / Indo Asian

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 to 32 AMP following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

M&L for electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance all as specified and as directed.

Supply and laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core.

Excavation in trenches n exc 1.5m wide and n.exc 1.5m depth for laying of cables/ GI tubes etc, in any type of Soil.

M&L for Double wall corrugated HDPE pipes of ISI marked 63 mm outer dia as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc. all as specified and directed.

Returning, filling in incl spreading levelling & well ramming in layers n exc 25cm thick with soil obtained from excavation from any type of soil.

Removing of excavated material/surplus soil n exc 50m & depositing where directed at a level n exc 1.5m above the starting point for any type of soils.

S&F GI pipe light grade 40mm dia with all fittings & fixed complete on pole/walls/in road etc for cable protection

M/s. VIJAY ELECTRICALS

M/s S N Atiwadkar

DHANSHRI ENTERPRISES

SIRI SALES AND SERVICES

Manak landmarks

OM INFRA