Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.1 LAccepted-AOC 19 C CUDDALORE MAIN ROAD PEDDANAICKENPALAYAM PO TK SALEM DIST PIN 636 109 | SALEM | SALEM | TAMIL NADU | 636109 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹11.4 L+₹16,272.88 (1.44%)Rejected-AOC | L2 | Rejected-AOC L1 being accepted | |
| 3 | L3₹11.9 L+₹66,333.29 (5.88%)Rejected-AOC PLOT NO 15 JAYASURIYA STREET GANGAI NAGAR KALLIKUPPAM AMBATTUR CHENNAI 600053 | CHENNAI | CHENNAI | TAMIL NADU | 600053 | L3 | Rejected-AOC L1 being accepted | |
| 4 | L4₹14.1 L+₹2.9 L (25.3%)Rejected-AOC NO 22 KUNNIJI NAGAR 1ST STREET EAST TAMBARAM CHENNAI 600 059 TAMIL NADU | CHENNAI | CHENNAI | TAMIL NADU | 600059 | L4 | Rejected-AOC L1 being accepted |
Tender Value
₹12 L
EMD Value
₹24,000
Closing Date
25 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE NAVY CHENNAI
Commander Works Engineers Navy Military Engineer Services Fort St George Rajaji Salai Chennai600 009
82601 ADDITION AND ALTERATION TO BUILDING NO P-02 AT CHENNAI UNDER AGE(I) NAVY CHENNAI
2024_MES_644269_1
CWE/NAVY/CHN/82601/E8 OF 2023-24
Open Tender
Civil Works
Item Rate
120 days
Chennai
As per NIT
8 documents required · 8 mandatory
₹500
AGE I Navy Chennai
₹24,000
Yes
7 May 2024
27 Feb 2024
27 Mar 2024
27 Feb 2024
25 Mar 2024
12 Mar 2024
27 Feb 2024 - 5 Mar 2024
Amount
SCHEDULE 'A' PART-I [ B/R WORKS]
Demolition of cement Concrete (Reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Taking down chowkhats with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4.0 sqm each complete all as specified and directed.
Demolition of Brickwork of one brick layer built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed
M & L for Brickwork with flyash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.
M & L brick work with modular flyash bricks straight or curved on plan exc 6 m mean radiusin half brick thick walls built in CM 1 : 4 complete all as specified and as directed.
M&L for 10 mm thick rendering in CM (1:3) with using WPC @3 % weight of cement on top of roof slab and finised even and smooth (without using extra cement) complete all as specified and directed.(Note : WPC shall be measured and paid separately)
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface laid over roof surface with 100 mm over lap and including vertical surfaces upto required height and tucking into grooves and sealing complete with thermofusion, torch application over a tack coat of hot bitumen 85/25 @1.2kg/sqm over compitable primer at 0.40 ltr/sqm after fixing of APP membrane and clean the surface on top and applying two coat of Aluminium paint etc all as per instructed manufacturer instructions and work to be carried Authorized applicator complete all as specified and directed.
Material and labour for high strength deformed TMT bars 10mm dia and over as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
S & F mild steel TMT bars 6 mm dia over upto and including 10 mm dia in strrups, spaces and binders and over, cut to length, bent to shape required, and hooking ends and binding with and including mild steel wire (annelaed) not less than 0.9mm dia complete all as specified and as directed
Material and Labour for reinforced cement concrete M-30 (using 20mm garded stone aggregate) as in as slab suspended slab, chajjas, facia, shalves and cooking platform, plateform and the like complete all as specified and directed
M & L for form work to soffits of suspended slabs such as roof slabs, floor slabs, roof beams,shelves, chajjas, facia, shalves and cooking plateform , plateform and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified and as directed
Material and Labour for Providing & injecting ATT chemical at the point of contact of voids in masonry wall and floor joins or perimeter of rooms and provided using chemical emulsion at the rate of 5 litres per sq.m @ 300mm intervals holes to provide including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed. Note:- Measurment to be consider only perimeter of wall and depth up 500 mm
Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
All as per Serial item No. 15 here-in-before but 600x100mm for skirting on wall surface including 10mm thick backing coat in CM (1:4) complete all as specified and as directed.
Taking down cement Plaster , any description, on brick walls or stone walls, and ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M & L for 15mm thick Rendering in two coats of on fair faces of brick work or concrete surfaces in CM (1:4) using with WPC @ 3% by wt of cement on second coat complete all as specified and directed. ( Note : WPC shall be measured and paid separately)
Supply only Integral water proofing compound complete all as specified and as directed.
M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaes in CM (1:6) and finised even and smooth (without using extra cement) complete all as specified and directed.
M&L for 10 mm thick rendering in CM (1:3) on ceiling on soffits and finised even and smooth (without using extra cement) complete all as specified and directed.
Supply and fix for 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified.
Supply and fix for 35 mm thick 2nd class Hard wood rail and style of Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.
Supply and fix for 125 mm size, Butt hinges, heavy weight, SS, and fixed complete all as specified and directed
Supply and fix aluminium handles cast type anodised for 150 mm complete all as specified and directed
Supply and fix for aluminium, anodised barrel tower bolts of extruded section and fixed for 200 mm length complete all as specified and directed
Supply and fix for Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm complete all as specified and directed
Material and labour for preparation of new plastered wall surfaces by vacuum based sanding machine and applying two coats of Interior emulsion /distemper oil emulsion over a coat of primer including applying 3mm thick of wall care putty, using mechanical tool/auto roller complete all as per manufacturer instruction and as directed. Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from AGE(I). Contractor should submit Auth applicator certificate before execution of work.
M&L for Preparation new plastered surfaces plastered and applying three coat of white wash on ceiling complete all as specified and directed.
M & L complete removal of existing treatment and preparation on walls by vacuum based sanding machine and applying two coats of oil bound distemper over a coat of primer over one or more coat of 3mm tk wall care putty using mechanical tool/auto roller complete all as specified and directed by Engineer-in-Charge. Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from AGE(I). Contractor should submit Auth applicator certificate before execution of work.
Material and Labour for 15-16 mm thick of any shade (table rubbed and polished) laid and jointed in flooring strips, step type window cills and jambs etc of green Marble over and including 15mm thick screed bed/ backing coat in CM 1:6 complete all as specified and directed
Taking down chowkat or frame with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and as directed.
S & F Aluminium powder coated frame with sliding windows and ventilators including joining cleat for fixing EPDM rubber/ neoprene gasket required with extruded built up standard sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom etc. complete all as specified and directed.Note : Thickness of powder coating not less than 50 micron.
Supply and fix for Powder Coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement complete all as specified and directed. Note : Thickness of powder coating not less than 50 micron.
S&F for 4mm thick Sheet glass, ordinary quality and glazing with glazing clips in square n exc 0.5 sq. m in each pane complete as specified and directed.
Demolition of cement Concrete (unreinforced) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) for complete all as specified and as directed.
Material and Labour for 75mm thick PCC (1:2:4) type B-1 (20 mm graded aggregate) as in flooring below tiles and finshing the even and fair with out using extra cement etc and including cuting of construction joints every 2.5 mtr and filled with sealing compound grade B etc complete all as specified and directed.
Material and Labour for Preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zink primer complete all as specified and as directed.
Material and Labour for Preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M & L for 20 mm thick machine cut,Granite stone slab (of any type)(table rubbed and polished) in steps,jambs, pillars, windows, cills, cooking plateforms and like in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and making mould on edges & including cutting for the shape for WHB complete all as specified and as directed.
M&L for Ashlar masonry, plain, well bonded, built in CM 1:4 complete all as specified and as directed.
M&L for Extra over 20mm thick lime or sand stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto coursesof squared rubble walling, regular coursed, Secunderabad and Bangalore types complete all as specified and as directed.
M&L for Struck pointing to block in course or ashlar masonry or concrete block walling in CM 1:3 complete all as specified and as directed.
Material and labour for preparation of old painted steel surfaces of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.
Removal of building materials/debris from 1.5mtr to a distance of out side of 5.0 KM etc complete all as specified and directed.
SCHEDULE 'A' PART-II [ E/M WORKS]
Material and labour for sub main wiring (concealed) complete with two single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 4 Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 2 run of 4 sqmm,1 run of 4 sqmm & one run of PVC conduit shall be measured as single unit
Point wiring(Concealed) with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor PVC insulated cable 1100 volts grade single core FRLS drawn into and including non-metallic rigid PVC conduit of 20 mm dia,concealed FRLS wiring, along with 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof excluding Modular Metal flush box and white cover plate with frame the switches, sockets, fan regulator etc as required suitable for Modular type fitting /fixture etc witch shall be measured and paid separately all as specified and directed for :-
(a) One light point controlled by one switch with cable 1.5 sqmm size.
(b) One fan point Ceiling fan/Exhaust fan controlled by one regulator / switch with cable 1.5 sqmm size.
(c) One 3 pin socket outlet 5 amps on the same board with other switches with cable 1.5 sqmm size.
(d) One 3 pin socket outlet 5 amps independent with cable 1.5 sqmm size.
All as per item No 48 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 15 Amps on independent board all as specified and as directed.
Supply and fix for Modular Switch, 1 Way, 6A, 1 Module complete all as specified and as directed
S & F Modular Fan Regulator, 120W step type 1 module humfree single pole complete all as specified and directed.
Supply and fix Modular Socket, 6A, 2/3 pin combined, complete all as specified and as directed
Material and labourfor ceiling rose, surface Bakelite, 65x50mm, two to three terminals, complete all as specified and as directed by the Engineer-in-Charge
M&L Modular switch 16 A, 1 module complete all as specified and as directed.
Supply and fix Modular Socket, 6A / 16A, 2/3 pin combined, 2 Module complete all as specified and as directed
Supply and fix for Modular white cover plate with frame, 3 Module complete all as specified and as directed
Supply and fix for Modular white cover plate with frame, 6 Module complete all as specified and as directed
Supply and fix for Modular Metal flush box, 3 module complete all as specified and as directed
Supply and fix for Modular Metal flush box, 3 module complete all as specified and as directed
S & F LED light fitting 4feet,1x20w,2500lm 6500k a trendy wall mounted battern,with extrunded aluminium housing,with integrated LED driver, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including taking down old complete all as specified and directed. Note:- old u/s fan should be deposite d in MES store yard
Supply and fix sheet metal enclosure powder coated double door for Distribution Board, SPN 8 way DB with Degree of Protection IP 42 , Detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar complete all as specified and as directed.
S & F MCB SPN 240 volts 40 Amps with 10KA breaking capacity C curve including making necessary incoming and outgoing electrical connection with suitable size of copper lugs complete all as specified and as directed.
S & F MCB SP 240 volts 10-32 Amps with 10KA breaking capacity B curve including making necessary incoming and outgoing electrical connection with suitable size of copper lugs complete all as specified and as directed.
Material and labour for earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to 4 mm GI wire as earthing lead by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No.3 in SSR part 1 connected to earthing test point, including 20 mm GI pipe (Medium grade) for watering and 15 mm GI pipe (Medium grade) for protection of earth wire and etc.. including testing on completion, PCC chambers in PCC1:3:6 type C1, RCC M25 type cover slab 50mm thick with 8mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle GI funnel & wire mesh, funnel, lugs and charcoal, salt etc all as applicable complete all as specified and as directed by the Engineer-in-Charge.
Supply and fix sheet metal enclosure powder coated double door for Distribution Board, TPN 4 way DB with Degree of Protection IP 42 , Detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar complete all as specified and as directed.
S & F MCB TPN 415 volts 63 Amps with 10KA breaking capacity C curve including making necessary incoming and outgoing electrical connection with suitable size of copper lugs complete all as specified and as directed.
Green Ray Technologies
Banyan Engineers and Contractors
Sri Sankar Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .