Karnataka

AOC

Works

Buildings

Repairs And Renovations to GRTDC (Garment Research Training Design and Development Centre) Building in Ballari City, under 8443 CEPMIZ KMERC Grants for the year 2025-26 (General Category)

Public Works Department

PWD Division Office Ballari | Ballari, Karnataka

Amount: ₹42.3 LCloses: 29 Sept 2025Closed

Timeline

Published10 Sept 2025
Closed29 Sept 2025
Awarded—

Bids

1 Bid29 Sept 2025

#	Company	Amount	Status
1	K H ESHWAR ₹35.4 Laccepted-aoc	₹35.4 L	accepted-aoc

Tender Value

₹42.3 L

EMD Value

₹85,000

Closing Date

29 Sept 2025, 10:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Executive Engineer

Office Number

Work Description

Repairs And Renovations to GRTDC (Garment Research Training Design and Development Centre) Building in Ballari City, under 8443 CEPMIZ KMERC Grants for the year 2025-26 (General Category)

Tender Information

Tender ID

PWD/2025-26/BD/WORK_INDENT24101

Reference Number

PWD/2025-26/BD/WORK_INDENT24101

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

PWD Division Office Ballari

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredKPWD Contractor Registration Certificate with QR Code

RequiredAnnual Turnover Certificate with UDN for the last five years duly attested by the Notary or Government Gazetted Officer and Submit the Originals at the time of Opening of the Financial Bid

RequiredSimilar Nature Construction of Building Works Done Certificate as Prime Certificate from competent authority not below the rank of Executive Engineer or equivalent duly attested by the Notary or Government Gazetted Officer Submit the Originals at the time of Opening of the Financial Bid.

RequiredExisting Commitments

RequiredPhysical and financial schedule format

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27-07-2007, a sum amounting to 1% of the bill amount will be deducted towards Construction Labour Welfare fund.

The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders.

Conditional tenders will not be accepted.

The Tenderer shall obtain the required work done certificates from the Competent Authority not below the rank of Executive Engineer or equivalent.

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year (both days inclusive).

The Tenderer shall scan Original Ownership Documents/ Lease/ Hire commitment Agreement for the Machineries and attach the scanned file to the Bid. The Original Documents shall be produced at the time of opening of technical Bids for physical verification.

The Employer reserves the right to reject any or all Tenders without assigning any reason or what so ever.

The tenderer shall maintain the Road/Building/Bridge during the defect liability period.

The Department is not responsible for any delay in accessing kp-procurement portal.

Financial turnover of previous years shall be given a weightage of 10% per year to bring them to the price level of the 2025-26. And Value at 2025-26 price level, of existing commitments and on-going works to be executed during the next 12 months (Financial commitment of previous years shall be given a weightage of 10% per year to bring them to the price level of the 2025-26) in the Technical Qualification Criteria mentioned in the next section.

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2: Instructions to Tenderers (ITT), will only be considered for evaluation.

The star rates in respect of specified materials (Cement, Steel and Bitumen) shall be payable as per GO No: FD/3/PCL/2008 Bangalore Dated 21.11.2008.

The tenderer shall furnish required information in all formats. Scan and upload all Formats/Original documents required for this bid to the kp-procurement portal. The Original Formats/Documents shall be produced at the time of opening of Technical Bid for physical verification.

The proposed methodology and program of construction, backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion.

The time stipulated for completion of work is 6 (Six) calendar months including rainy season.

The Agency shall comply with ISO 14001 (Environmental Management System) requirement during execution of work.

The tenderer shall submit an affidavit stating that he has not involved in litigation with Government, also he shall state that, amount of existing / on going works and amount of works awarded to him and yet to be commenced.

Contractor should follow strictly the prevailing rules of labour act and applicable any other law as concerned to work.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity till completion. Contractor should indemnify the client to that extent.

The Defects Liability Period is 24 (Twenty Four) Months after successful completion of the Project

Contractor should establish a fully functional laboratory at site at their own cost and risk in order to carry out all the required tests for the materials and work being used in the project for satisfactory completion.

The Bidder shall ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of KP-Procurement portalon or before the last date of bid submission.

The tenderer is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KP-Procurement portal due to internet connectivity issues and technical glitches.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection

It is mandatory to use Manufactured Sand as per Government Circular No.PWD/72/BMS/2013 dated 31-07-2013. Also it is mandatory that the bidders should upload the required documents which demonstrate that, the bidder owns sand manufacturing unit or an agreement with the manufactured sand suppliers. The manufactured sand that should be got tested to confirm IS 383-2007 before use. Further, the contractor shall have his own Artificial sand manufacturing plant Unit.

As per Government Circular No.PWD/15/ITC/20082009 dated 2-12-2010, the tenderer can submit requisite EMD in two parts. i.e., for works costing from Rs.50.00 lakhs to 1.00 Crore, minimum of Rs.50,000/- through e-payment and rest of the amount either in the form of Bank Guarantee or FDR drawn in favour of the Executive Engineer, Public Works Department Division, Ballari issued by any Nationalised or Scheduled Bank. For works costing Rs.1.00 crore and above, minimum of Rs.1,00,000/- through e-payment and rest of the amount either in the form of Bank Guarantee or FDR drawn in favour of the Executive Engineer, Public Works Department Division, Ballari issued by any Nationalised or Scheduled Bank. If the tenderer intends to submit the requisite EMD in two parts, then the validity of EMD submitted in the form of Bank Guarantee or FDR shall remain valid for a period of 135 days from the last day of bid submission. If not such tenders will not be considered for evaluation. The tenderer shall submit the original instrument of EMD remitted in second part.

The Successful Tenderer has to execute the work as per approved designs and drawings provided by the Department.

Contractor should adhere to HSE policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project.

The tenderer shall note that, the increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.

The tenderer shall note that, the GST at 18% shall be paid to the tendered amount separately.

The tenderers shall note that as per the Govrnment Order No.FD/850/EXP-12/15 dated 29-12-2015 and GO No.FD/130/EXP-12/15 dated 8-9-2015, the exemption from payment of EMD for Micro and small enterprises registered with NSIC under single point vendor registration scheme is applicable only for supply of goods but not for works.

If undue delay caused by the contractor, the progressive damages caused to road will be assessed and make good at the cost and risk of the contractor. In addition, suitable action will be initiated against the contractor for the damages occurred during the undue delay period in accordance with the Karnataka Highway Act, 1964.

The tenderers shall note that, as per The Karnataka Minor Mineral Concession Rules-1964, it is mandatory to submit the Mineral dispatch Permits (MDPs) issued by a competent authority, along with the bills. If not, penalty will be levied as per the prevailing clauses.It is mandatory for the contractor to upload the work done certificate issued by an officer not below the rank of Executive Engineer duly indicating the work indent numbers for works costing more than Rs.5.00 lakhs

The tenderer shall upload Physical and financial implementation calendar format before last date of tender receipt in the kpp portal.

The Tenderer or his identified sub-contractor should possess required valid electrical license for executing electrification works.

Successful tender should have to obtain all mandatory clearances from Fire Services, Electrical Inspectorate, GESCOM Power Supply, Water supply, UGD from local bodies etc., before commencement of the work.

To qualify for award of this contract, each tenderer should furnish qualification information as per clause-3 and section- 3 of Standard Tender Document attached to this tender and all the Formats prescribed in the bid documents shall be filled by the tenderer in full and complete manner. Otherwise the tender will be rejected.

All scanned documents uploaded Should be in original and legible.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents of K.P.W.D. and further orders thereon. The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders ( Difference between amount put to tender and quoted amount).

The tender of any tenderer who does not accept the conditions contained in the tender document is liable to be rejected. Conditional tenders will not be accepted.

The cost of tender form shall not be refundable. The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. No interest will be paid by the Government on the Earnest money deposit.

The rates quoted shall be through rates for finished items of work inclusive of all lead and lifts, loading and unloading charges, all incidental charges and all Royalty etc., complete payable to the Government or Local bodies in the Region.

The rates quoted shall be inclusive of providing barricading fittings of danger lights, Jungle clearance near work spot / watchman etc., complete and maintained till completion of work and removing on completion as directed by the Engineer-in-charge of work. Rates quoted should includes clearance of site prior to commencement of work and its closure in all respects and holds good for all works under all conditions of site, moisture and weather.

A Cess of 1% of the total approved amount of contract will be deducted from the work bill towards the Building and other construction workers welfare in accordance with the Govt. Order No. LD 300 LET 2006 Bangalore dated 18-1-2007. Royalty on construction materials and other taxes will be deducted as per prevailing Government orders. Contractor should follow strictly the prevailing rules of labour act.

All the materials required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost. All quantity and gradation of metal collected for the works should be got approved by the competent authority before use.

Contractor should execute the project with least impact to the environment. The Contractor should maintain the work during defective liability period as per contract conditions.

Omission and Typographical errors which is in the opinion of the Executive Engineer, will not be a ground for claims of extra payment. If any of the dates mentioned happens to be a general holiday, the next working day will holds good.

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, Public Works Department, Division, Ballari during office hours on all working days.

The tenderer should have registration under section 7 of Building and other construction works act 1966. (As per G.O. No. LD 95 LET 2013, Bangalore dated 01-4-2013.

The tenderer should be a registered KPWD/CPWD Class-I Contractor with QR code

Tenderer should produce certificate of work insurance policies before executing the work.

Tenderer Should submit work program before executing the work.

GST shall be paid to the tendered amount separately as per Government order no FD 20 CSL 2022, Bangalore Dated: 15.07.2022 and also as per circular issued by the government vide letter No. FD 447 Expenditure-12/2022, Bangalore Dated: 30.07.2022.Payment based on the grant released from KMERC.

All the milestones should be achieved as per the approved DPR (Annexure attached)

The proposed road project approved under CEPMIZ i.e. protective/restoration type project. Therefore, Contractor not eligible for any additional financial claims due to delay in handing over of site/any other reason. Contractor only eligible for extension of contract period in the above case under this contract.

The contractor should employ competent liaison persons to expedite the land clearance process through competent authorities (State/central) with the help of employer under this contract.

Successful tender should have to obtain all mandatory clearances from Fire Services, Electrical Inspectorate, GESCOM Power Supply etc., before commencement of the work.

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e.,2020-21, 2021-22, 2022-23, 2023-24 and 2024-25 (a) achieved in at least two financial years an annual average financial turnover (in all classes of civil engineering construction works only) of Rs.43.00 Lakhs.

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25 (b) satisfactorily completed as prime contractor, at least one similar work such as Construction of Building Works of value not less than Rs.21.50 Lakhs.

Fee & Financial Details

Tender Fee Amount

₹1,060

EMD Fee Amount

₹85,000

Important Dates

Last Activity

29 Sept 2025

Published

10 Sept 2025

Download Ends

24 Sept 2025

Pre-Bid Meeting

16 Sept 2025

BOQ Preview

•

Repairs And Renovations to GRTDC Building at Bellari, in Ballari City.

•

Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...

•

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall inclu...

•

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall...

•

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional co...

•

Finishing walls with water proofing cement paint of required shade :Old work (one coats applied @ 2.20 kg/10 m²) over priming coat of primer applied @ 0.80 l/10 m² complete includ...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

•

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...

•

Chipping unsound weak concrete material from slabs. Beams, columns & roofs upto 50mm by manual means or by standard power driven percussion type including cleaning reinforcement with ...

•

Cleaning of reinforcement from rust by Alkaline solution thoroughly as per direction of Engineer in charge of work. ---- with all lead, lifts, loading, un-loading charges, including cost of all materi...

•

shotcreting R.C.C. columns, beams and slabs etc. in 50 mm thickness with approved design mix M25 concrete having the specified minimum characteristic compressive strength with OPC / PPC / PS...

•

Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-i...

•

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking to the appropriate disposal area as per direction of Engineer-in-charge.Of area beyond 3 m² ---- w...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including ...

•

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of app...

•

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...

•

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doo...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Repairing and fixing shutters (panelled or glazed) to doors, windows,

•

ventilators and cupboards. ---- with all lead, lifts, loading, un-loading charges, including cost of all materials, cost ...

•

Providing & fixing Glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick Glass panes including cost of materials, labour, usa...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

•

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

•

Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials to the appr...

•

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...

•

Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all l...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

•

Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy ---- with all lead, lifts, ...

•

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore ---- with all lead, lifts, loading, un-loading charges, including cost of all materials, cost of labour, HoM all Machinerie...

•

Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy ---- with all lead, lifts, loading, un-loading ch...

•

Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 2 HP, Size 50x40 Head 22M, Discharge 186 LPM ---- ...

•

Crackfilling - Providing Waterproof treatment to the cracks using 1 coat of bondcoat of SBR latex and Cement at the ratio 1:1 and then preparing Cement Mortar of 1:3 admixed with SBR latex...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 200mm ---- with all lead, lifts, loading, un-loading charges,...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS hinges 125 mm ---- with all lead, lifts, loading, un-loading charges,...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 250x10mm ---- with all lead, lifts, loading, un-loading c...

•

Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to ...

•

old Terrace screed Repair with Uv Resistant waterproof coating - Providing and Applying high elastic & resilient Acrylic polymer Waterproofing coating which is single component, cold applied,...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. ofmachine screws, bolts nuts etc., complete on the existing ...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch ( PWD Ele SR 2023-24 , Item No : 3.6.1, Page No : 9, Vol...

•

6A Three Way socket ( PWD Ele SR 2023-24 , Item No : 3.6.3, Page No : 9, Vol-06) ---- with all lead, lifts, loading, un-loading charges, including cost of all materials, cost of labour, HoM all Machi...

•

16A One Way Switch ( PWD Ele SR 2023-24 , Item No : 3.6.7, Page No : 9, Vol-06) ---- with all lead, lifts, loading, un-loading charges, including cost of all materials, cost of labour, HoM all Machine...

•

32A DP Switch ( PWD Ele SR 2023-24 , Item No : 3.6.9, Page No : 9, Vol-06) ---- with all lead, lifts, loading, un-loading charges, including cost of all materials, cost of labour, HoM all Machineries...

•

6/16A Universal Socket ( PWD Ele SR 2023-24 , Item No : 3.6.10, Page No : 9, Vol-06) ---- with all lead, lifts, loading, un-loading charges, including cost of all materials, cost of labour, HoM all Ma...

•

Stepped Fan Regulator Two Module ( PWD Ele SR 2023-24 , Item No : 3.6.4, Page No : 9, Vol-06) ---- with all lead, lifts, loading, un-loading charges, including cost of all materials, cost of labour, ...

•

Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc, for operation on 230V, 50cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearin...

•

Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing 'S'' hook with fanregulator to the existing board together with supplying andfixing 5A. ceiling rose, necessary lengt...

•

Supplying of .....feet-PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours&70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz&Power ...

•

Supplying & fixing of retrofit type-LED bulb......W with OPAL acrylic diffuser comprising of LED source with CCT6500 degree K,CRI 70%. efficacy 80 lumen per W,life 25000 burning hours and Compliance...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

buildingspecification.pdf

Others - buildingspecification • 0.87 MB

Physical and financial implementation calendar .xls

Others - Physical and financial implementation calendar • 0.10 MB

environemnt management system - regulatory requirements.doc

Others - EMS • 0.21 MB

24101 (Gen) kw-2.doc

Tender Document • 1.78 MB

formats(new).xls

Others - formats • 0.06 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

K H ESHWAR

₹35.4 Laccepted-aoc