SPECIAL REPAIR TO BLDG NO T-60 AND T-61 AT STATION OFFICERS INSTITUTE AT MORAR CANTT GWALIOR UNDER GE GWALIOR

Amount

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specifeid and directed.

M&L for reinforced cement concrete (1:2:4) type B-0 ( using 12.5 mm graded stone aggregate ) as in beams , cantilevers bressummers , lintel over 1.5 m span incl neccesary formwork etc. complete all as specified and directed.

M&L for mild steel TMT bars ,10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M&L for mild steel TMT bars 5 mm and over upto and including 10 mm dia , as in stirrups , spacers , and binders , cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) ,removing serviceable tiles to store and rubbish of the premises complete all as specifeid and directed.

M&L for vitrified ceramic light shade tiles 10 mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. and including Screed bed or bedding layer or mortar 15mm layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tils complete all as sepcified and directed

All as per item No 6 above but as in dado/skirting fixed over and including 10 mm thick rendering in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cment to match the shades of tiles complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick as in floor area exc 0.11 Sqm but n exc 0.18 sqm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 as in floors complete all as specifeid and directed.

All as per item No 8 but tiles area exc 0.06 Sqm but n exc 0.11 sqm thick in vertical surfaces of wall set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick screed bed in CM 1:4 complete all as specifeid and directed.

M&L glazed ceramic coloured tiles 300mm x 200mm x 5 mm to 6 mm thick, in skirting, dados, risers to steps etc over and including 10mm thick rendering in cement plaster 1:4 on the other side of lathing and pointed in white or coloured cement to match complete all as specified and as directed.

M&L glazed ceramic coloured tiles in vertical surface 350x250x7mm/ 450x350x6-7 mm thick set and set and jointed in neat cement slurry and pointed in white or coloured cement to match in coloured cement to match with the colour of tiles, over and incl 15 mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified and as directed.

Dismantling stone slab, stone beams and type of any description or thickness laid bedded and pointed in any mortar in roof,floor etc. complete all as specified and directed.

M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slury and pointed with white cement with admixture of pigment to match the shade of granite stone including cuting and polishing types as in dado complete all as specified and directed.

M & L for machine cut Kota stone slab 18 to 20 mm thick and min size of kota stone shall be 550x550 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing ect over and including 20mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

M&L Kota stone slab 18 to 20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed withover and including 10mm thick rendering in cement plaster 1:4 on the other side of lathing and pointed with coloured cement complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe 290,Gde E-165 complete all as specified and as directed .

Dismantling of asbestos cement (corrugated, semi-corrugated) ect sheets in roof covering including ridges etc complete all as specified and directed.

S&F flat iron 50x5mm thick wind ties fixed to CGI sheets on roof including or necessary drilling, bolting or riveting etc confirming to Fe- 290 grade E-165 complete all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 0.50mm thick pre-painted galvaltume aluminium zinc coating GI based steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridge complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 over brick/concrete surfaces finished fair and even complete all as specified and as directed. Note WPC shall be measued and paid seperately.

M&L for rendering 15mm thick on the ‘other than fair faces' side of lathing in cement mortar 1:6 over brick/concrete surfaces complete all as specified and as directed.

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

M&L dismantling of AC ceiling board any descrition complete all as specified and directed.

S&F, anodised aluminium snap grid frame work for false ceiling consists of powder coated aluminium angle 22x22x1.3 mm and Tee 35x25x1.3 mm of size and grid 600x600 mm complete all as specified and directed.

M&L for non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium anodised frame and hanges framework fixed with Hangers 3-4 mm dia. G.I. (upto reqd length) adjusting level fixed to roof slabs by means of ceilling cleats complete all as specifed and directed

Taking down Chowkats or frames not exceeding 1.5 sqm each (Without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as specified and directed.

S&F Second class hard wood plain solid straight chowkhats and frames wrought frammed ribated on the solid rounded or chamfered put together with glue pinned at joints includidng dismantling of existing chowkhat complete all as specified and as directed

Taking down shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and directed.

All as per item No 32 but exc 2 sqm each complete all as specified and directed .

Refixing in same opening of shutters of any description exc 1 sqm but nexc 2 sqm each complete all as specified and directed .

All as per item No 34 but exc 2 sqm each complete all as specified and directed .

M & L for factory made 30 mm 2nd class hard wood, plain framed panelled shutters with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board medium density, wood particle board with commercial veneering on both face IS 1003 (Part-I) kiln seasoned and chemically pressured treated complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded omplete all as specified and as directed all as specified and as directed

S&F solid PVC doors frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and drawing as specified in clause 8B-1 to 8-B-10 on page 133 to 138 and page 146 to 153 of SSR -2004 part-II complete all as specified and as directed.

S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC`C` channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles ad plain colour PVC sheet for top rail, lock rail & bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame complete all as specified and shown on drawingsSSR Part-II .

S&F Box type steel windows with side hung shutters (double shutters for glass and gauze) jointed together with and including grills using 12mm square bars @ 10cm C/C as per TD No CEBZ/TD /14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welded complete all as specified and as directed. Note:- Glass/gauge shall be measured and paid separately under respective item as suply and fix complete all as specified and as directed.

Supply only galvanized mild steel wire cloth with 0.46 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick Sheet Glass ordinary qulity and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

Dismantling boarding any description / partition ect fixed with nails in any position (including cup board shutter/shelve upto 25mm thick) complete all as specified and directed.

S & F in 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F 75 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair butt hinges 75 mm long medium weight, cold rolled mild steel.complete all as specified and directed.

S&F extruded aluminum alloy handles 75mm size fabricated type anodized complete all as specified and directed.

S&F Butt hinges, Medium Weight, cold rolled mild steel, and fixed 100 mm complete all as specified and directed.

S&F in repair butt hinges 100mm long medium weight, cold rolled mild steel complete all as specified and directed.

S&F Aluminium handles, cast type anodised of Size 125mm complete all as specified and directed.

S&F in repairs extruded aluminum alloy handles 100 mm size fabricated type anodized all as specified complete all as specified and directed.

S&F 100 mm long aluminum anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repairs 100 mm long mild steel barrel tower bolts, stove enamelled black ,with bright bolt and fixed complete all as specified and directed.

S & F 300 mm aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet , cast or extruded sections or cast aluminium alloy complete all as specified and directed.

S & F in repairs 300 mm aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repair 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

S&F in repair cutain rod of Stainless steel 23-25 mm dia pipe thickness not less than 0.8mm of pipe with fixing bracket, side nobes etc fixed on walls with screws with PVC rawl plugs etc complete all as specified and directed.

M&L for stainless steel sink with draing board made out of 1 mm thick sheet for kitchen with plugs,washers,wastepipes cast iron cantilever brakets connecting union overall size 915mmx460mm with bowl size 410mmx330mmx160mm, incl PVC Waste pipe and other connected fittings complete all as specified and directed.

S&F PVC cabinet with shelve 450x600mm including mirror fixed to wall with brass cleat with shutter complete all as specified and directed.

S&F in repairs of stainless steel plate rack for utensils of size 750 X 750 mm & standard quality min weight 7.20 kg complete all as specified & directed.

Demolition of Brickwork or stone/ boulder masonry, built incement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L brick work with sub class `B' bricks, straight or curved on plan exceeding 6m mean radius(except bricks), built in cement mortar 1:6 complete all as specified and directed. (Note :- old bricks may be obtained from demolition of brick work).

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cmomplete thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) as in plinth protection incl finishing the surface even and smooth w/o using extra cement complete all as specified and directed.

Cutting out cracks to V section in existing walls, roffing or trace, cleaning out wetting grouting with cement and sand slurry 1:3 complete all as specified and directed.

S&F chicken wiremess with tack screws of galvanised mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F anodised powder coated aluminium fixed type partition partly panelled and partly glazed section walls made up of 44 x 44 x 1.5 to 1.8 mm thick standard aluminium section incl necessary jointing cleats, glazing clips, rubber packing, aluminium snap beading screws, including glazing with 5mm thick plain sheet glass Make:- Modi Guard/ Saint Gobain/Eqwt Make/approved make) and panel of 12mm thick prelaminated particle board exterior grade with both side decorative choice lamination complete all as specified and as directed.

M & L for powder coated (minimum thickness of powder coating 50 mm micron) aluminium window /door (any reqd type) with aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws, lock etc complete all as specified and as directed. Note : Panel filling ie. glass, fiber sheet, board, wire mesh etc. shall be measured and paid for separately.

M & L for powder coated (minimum thickness of powder coating 50 mm micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F for door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked), suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and as directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned taks or galvanised wire staples complete all as specified and directed.

Dismantling of water tank exc 250 ltrs and n. exc 500 ltrs capacity and removing from site complete all as specified and directed.

S&F,500 ltr capacity rotational moulded polythene water storage tank two layers ISI Marked (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed.

Dismantling of water tank exc 500 ltrs and n. exc 1000 ltrs capacity and removing from site complete all as specified and directed.

S&F,1000 ltr capacity rotational moulded polythene water storage tank two layers ISI Marked (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed.

Taking up or down 15 mm dia steel water tubing and connections including cleaning for refixing if required or removal from site complete all as specified and directed.

Taking up or down 20 mm dia steel water tubing and connections including cleaning for refixing if required or removal from site complete all as specified and directed.

S&F, 15mm bore tubes medium grade galvanised with all fitting and fixed to walls and ceiling or laid in floor etc complete all as specified and directed.

S&F, 20 mm bore tubes medium grade galvanised with all fitting and fixed to walls and ceiling or laid in floor etc complete all as specified and directed.

Refixing 15mm bore old steel tubing and connections in new or old positions (walls, ceiling, floor etc) complete all as specified and directed

Refixing 20 mm bore old steel tubing and connections in new or old positions (walls, ceiling, floor etc) complete all as specified and directed.

S&F in repair tublar towel rail 20mm dia D type 60 cm long between flange brass chromium plated complete all as specified & directed.

S&F in repair stainless Steel Peg Set of 6 hooks ISI marked medium weight complete all as specified and directed.

S&F in reapir brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed

S&F PVC connection of 450 mm length in repair complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc. (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F, 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. complete all as specified and directed.

S&F, 110mm bore, PVC (SWR) bends any radius complete all as specified and directed complete all as specified and directed.

S&F, 75 mm bore, PVC (SWR) bends any radius complete all as specified and directed complete all as specified and directed.

S&F, 75 mm bore, PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed.

S&F, 110mm bore, PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed.

S&F Chromium plated shower rose 125 mm dia in repairs complete all as specified and directed.

S&F in repair bib taps fency type 15 mm caste copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair stop cock fency type 15 mm caste copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float and handle including brackets and flush pipe PVC 32mm dia of required lengh complete all as specified and directed.

S&F pedestal pan and tap, of size 475X350X390 mm including connection to drain and flusing pipe and seat cover closed pattern with flat bottam, anc cover and mild steel cromium plated or hinging device etc complete all as specified and directed.

S&F in repair flushing jet spray for pedestal pattern EWC including 1 mtr long flexible pipe and brass chromium plated nuts etc complete all as spd and directed.

S&F in repair stainless steel healt faucet with stainless steel tube and holder etc complete all as speicified and directed .

S&F in repair water closet including provision of cement concrete bedding viterous china squatting pan orrisa pattern of size 580x440 mm white with integral foot rest etc. excluding flushing cistern complete all as specified and directed.

M&L PVC floor trap ,plain with grating including jointing to waste pipe with solvent cement dia of outlet 75mm in repairs complete all as specified and directed.

S&F in repairs 15 mm pillar taps caste copper alloy ,with capstan heads chromium plated screwed down high pressure without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair waste fitting for wash basins and sinks with inlet and outlet, screwed for pipe or connections, and with one cleaning cap, 32mm bore complete all as specified and directed.

S&F, in repair 32 mm bore PVC waste pipe and 65 cm long flexible complete all as specified and directed.

S & F in repairs grating doom 100mm dia of Chromium plated (Minimum weight 25gms to Nahani traps ect complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white flat back size 550 x 400mm excluding taps waste chain and plug and porcelain stopper but including brackets complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specifeid and directed

M & L, hard core of for broken stone boulder of gage n.exc 63mm deposited, spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surfaces complete all as specified and directed.

M&L for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate),75 mm thick, as in sub base for floor, finished even and rough complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L 60 mm thickness machine pressed precast concrete interlocking paver block M-35 any shape and size confirming to IS 15658-2006 in grey cement glossy finish rubber mould casted laid dry over sand cushioning complete all as specified and directed. (Make : Mahtab / Gwalior Granite/ Ravi Tiles/Eqwt ISI marked make )

M&L for cement concrete type D2 1:4:8 (Using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for chequered cement concrete tiles 250mm x 250mmx 25mm thick, set jointed and pointed in cement slurry in floors with grey cement and pigments complete all as directed including 15mm thick screed bed in CM 1:6 complete all as specified and directed. Make :- Mahtab / Gwalior Granite/ Eqwt ISI marked make )

M&L Plain cement concrete (1:2:4) Type B0 using 12.5 mm graded stone agg as levelling course/mass concrete/edge of pathway etc complete all as specified and directed.

M&L for preparation old surfaces of wall including, complete removal of existing treatment , and applying wall putty on walls and applying two coat oil emulsion over a coat of primer complete all as specified and directed.

M&L preparation of new plaster surfaces of wall, applying wall putty on walls and applying two coat of oil emulsion over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment on wall (any number of layers) by scrapping with steel scrapping or any other means, including removing vegetable/plants root from walls / chajja's and applying two coats of distemper, oil emulsion white or tinted over and incl a layer of Birla or JK wall putty @ 1.20 kg / sqm coplete all as specified and directed.

M&L for Preparing of old or new decorated surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and M&L applying two coat of white wash , complete all as specified and directed.

M&L for Preparing of old or new decorated surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down, smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and M&L for applying two coat of cement base paint including watering and curing of surface adeqautely before and after application of cement base paint complete all as specified and as directed.

M & L for preparing surfaces of old decorated wood or wood based materials and applying one coat of synthetic enamel paint on surfaces not otherwise described over 10 cm width or girth complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old steel & iron surfaces (previously decorated) for grills, guard bars of any description not otherwise escribed over 10 cm in width or girth including preparation of old surfaces complete all as specified and directed.

M & L for applying two coat of synthetic enamel paint as subsequent coat on new wooden surfaces over 10 cm in width or girth including and over one coat of pink primer complete all as specified and directed.

M & L for applying two coat of synthetic enamel paint subsequent coat on new steel surfaces (previously decorated) for grills, guard bars, shutter etc including preparation of surfaces and including and over one coat of red oxide complete all as specified and directed.

M & L for Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M & L for point wiring with 1.5 sqmm (Nominal Area)PVC insulated FRLS un sheathed multi stranded copper conductor drawn in and including non metalic rigid PVC concealed conduit of med grade of suitable size with all fitings and accessories including factory made MS/ pressed modular terminal box with zinc coated duly concealed in wall including modular metal flush boxes reqd as per site reqmt for mounting switches, sockets fan regulators etc including continuous earth wire PVC insulated 1.5 Sq mm FRLS copper conductor connecting to common earth and earth dolly complete all as specified :-

One light point controlled by one switch complete all as specified and directed.

One fan point controlled by one switch complete all as specified and directed.

One Bell/Buzzer point controlled by one way 5 Amp push button switch complete all as specified and directed..

One 5 pin socket out let 5 amps on same bd complete all as specified and directed.

One 5 pin socket outlet 5 Amp controlled by one switch on independent board complete all as specified and directed.

All as per item No 2 but with 2.5 sqmm multistrand copper conductor cable for one 15 Amp socket outlet controlled by one switch on independent board and 1.5 sqmm PVC insulated multi strand copper conductor cable as continous earth wire complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 3 terminals 65x50mm complete all as specified and directed.

S & F modular white cover plate with frame of 12 module complete all as specified and directed.

S & F modular white cover plate with frame of 08 module complete all as specified and directed.

S & F modular white cover plate with frame of 03 module complete all as specified and directed.

S & F modular white cover plate with frame of 02 module complete all as specified and directed.

S&F Modular switch 1 way 06 amp single pole complete all as specified and directed.

S & F modular switch socket combination 16A, 6 Pin of 3 module complete all as specified and directed. Make :- Kinjal/ Anchor/ Cona,

S & F of modular socket outlet 6A-5 pin combined of 02 module complete all as specified and directed. Make :- Kinjal/ Anchor/ Cona,

S & of moduar bell push 6 Amp 1 module complete all as specified and directed. Make :- Kinjal/ Anchor/ Cona,

S&F of modular fan step regulator 120 W-2 module complete all as specified and directed. Make :- Kinjal/ Anchor/ Cona,

S&F of buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and directed.

S&F Lamp holder including LED Bulb 9W/12W PVC/polycarbonate type with back plate suitable for batten fittings complete. Make for lamp holder : Cona/Leader/Anchor. Make for LED Bulb :- Crompton/Wipro/Osram.

13. S&F recessed/surface LED ceiling light with broad collar frame offering superb energy saving of 36 Watts suitable for 600 x 600 mm ceiling complete all as specified and directed. Make :- Crompton/ Philips/Havells.

S& F of 9/10 W LED 2Ft LED batten including LED tube rod having LED Batten suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with minimum 2.5 KV surge protection complete all as specified and directed. Make :- Wipro/ Philips/Havells.

S&F of Wall or recess Mounted Box type Batten with suitable LED tube rod of 1200 MM 18 W / 20 W LED. The LED Tube of design ensures uniform lighting complete all as specified and directed. Make :- Wipro cat Part No LL13-181-65 +WIO 921208 or equivalent/Philips/Havalls.

S&F of 20W of LED security Light fixture with IP66 protected Die-Cast Aluminum housing and Heat resistive Toughened Glass. Driver shall be 3 stage Constant Current Constant Voltage with voltage range of 150-270V AC. Output voltage of driver should be complied to Safety Extra Low Voltage norms not exceeding 60V DC complete all as specified and directed. Make :- Wipro Cat Part No :- LRO2-261-XXX-57-XX or equivalent/Philips/Havalls..

M & L for Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store including painting with two coat of synthetic enamel paint over one caot of primer and refixing the same all as specified and directed

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

M&L for sub main wiring with 2 runx 6 Sqmm + 1 run x 4 sqmm earth wire single core PVC insulated cable unseathed multistranded FRLS copper conductor LT 1100 volts grade FRLS cable IS-694 (ISI marked with valid CML No ) drawn in & icluding PVC conduit of dia not less than 25mm (ISI marked with valide CML No ) ncluding its all fittings/accessoreis with one run single core copper cable 4 sqmm multistranded conductor ( ISI marked with valide CML No) colour code as a earth continuity and connecting upto DB complete all as specified and directed.

S & F Sheet metal enclosure MCB DB, double door , 4 way TPN, 415 volts with 200 Amps rated bus bar with blanking plates wherever required and I.P. 20 degree protection complete all as specified and directed.

S&F, in repair, MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F, MCB TPN 63 Amps, 240 volts 'B' series 25 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SPN 40 to 63 Amps, 240 volts 'B' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SP 240 volts, 6 to 40 Amps, 'B' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

S&F sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket with and including one single pole MCB 20. Amps, 240 volts,10 KA complete all as specified and directed. Make :- Legrand/Siemens/Scheider.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe etc complete all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 70 Sqmm 4 Core complete all as specified and directed.

Excavation in trenches n exc. 1.5 m wide and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L for sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and directed.

M&L for bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete all as specified and directed.

S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.

M/s Ratan Lal Jain and Co.

RAJ AND BROTHERS

M/S Rajeev Construction

M/s. Varinder Kumar Sharma

M/S MAISUR CONSTRUCTION COMPANY PRIVATE LIMITED

M/S YOGANSH CONSTRUCTION CO.

M/s Himgiri construction

M/s Subhash Construction Co.

Babatia super works

BHAGIRATH CONSTRUCTION COMPANY

M/s J S & SONS

M/S MAHAVIR SINGH