Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹63.3 LAccepted-AOC | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹74.7 L+₹11.4 L (18.0%)Rejected-Finance HOUSE NO 1 11 33 1 NEW ALWAL BOLARUM SECUNDERABAD 500010 | HYDERABAD | TELANGANA | 500010 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹75.7 L+₹12.5 L (19.7%)Rejected-Finance PLOT NO 33 34 SAINAGAR NAGOLE HYDERABAD 500 068 | HYDERABAD | MEDCHAL MALKAJGIRI | TELANGANA | 500068 | L3 | Rejected-Finance Other than L1 |
Tender Value
Refer Docs
EMD Value
₹1.5 L
Closing Date
5 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (ARMY) SECUNDERABAD
CWE (ARMY) MUDFORT COMPLEX, SECUNDERABAD- 500003
PROVN OF DRILL GROUND AT SECUNDERABAD UNDER GE (NORTH) SECUNDERABAD
2023_MES_592378_1
84561
Open Tender
Civil Works - Roads
Item Rate
180 days
Secunderabad
As per NIT
7 documents required · 7 mandatory
₹1,000
GE (North) Secunderabad
₹1.5 L
Yes
5 Aug 2023
29 Apr 2023
12 Jun 2023
29 Apr 2023
5 Jun 2023
22 May 2023
Amount
Surface dressing not exceeding 15cm deep in hard/dense soil all as specified and as directed.
Rough excavation note exceeding 105 m deep and getting out in hard/dense soil all as specified and as directed.
M&L approved moorum/red bajri filling in floors or pavings, laid in layers n exc 15 cm thick, including spreading, levelling, watering and rolled with hand roller of 0.2 to 0.5 tonne capacity to required camber and gradient complete all as directed . Note : Moorum shall be brought from out side MD land.
Removing excavated surplus material (soil) to a distance not exceeding 50m and depositing where directed at a level n.exc 1.5 Mtrs above the starting point, complete all as specified and directed.
Preparing unsurfaced water bound mecadam surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying a tack coat of paving bitumen(VG-30 Grade) primer at 10 Kgs/10 sqm complete all as specified and directed.
M&L for15cm thick (two layers of 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required with granite, trap or basalt stone complete all as specified and directed.
Rolling and consolidation formation surface in cutting and dressing by using power roller 8 to 10 Tonne, complete all as specified and directed.
Bituminous premixed semi dense asphaltic concrete, 40mm consolidated thicknes with 5.5% binder content(paving bitumen VG-30) by weight of total mix, mixed in hot mixed plant, rolled and compacted to required camber and gradient by using mechanical paver and rolled with 8 to 12 Tonne power roller complete to be uniform surface all as specified and directed.
M & L for painting lines, dashes, arrows, letters etc on road surfaces / over speed breakers exc 10 cm and n exc 30 cm wide, with thermoplastic road marking paint 2 to 3mm thick, spray machine, preparing black top surface including fanning out dust and any other foreign matter complete all as specified and directed.
M&L for 150mm thick soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient complete all as specified and directed.
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, tubular poles or laying of pipes, or for removal / laying of cables etc., not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in hard/dense soil, including trimming sides of foundations and forming bottom surface to required level, complete all as specified and directed.
Excavation in post holes (or similar holes ) each nexc 0.5 cum getting out, returning, filling in and ramming earth in layers not exc 25cm, watering amd removing surplus soil to a distance of 50m and making good surface in hard/ dense soil, complete all as specified and directed.
Returning, filling in, in soils, including spreading, levelling, watering and well ramming in layers not exceeding 25cm., complete all as specified and directed.
Plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in and set in cement mortar 1:6, complete all as specified and directed.
100mm thick, Plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base or sub floors finishing the surfaces even and rough to receive the topping layer, complete all as specified and directed.
Hardcore of guage not exc. 63mm with broken stone or boulders, deposited spread and level in layers n.exc. 15cm thick, watered and rolled / rammed to a true surface, complete all as specified and directed.
100mm thick, Plain cement concrete (1:2:4) type B2 (using 40mm graded stone aggregate) as in floors finishing the surfaces even and making impressions of expended metal while the conc is green , complete all as specified and directed.
Rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished fair and even without using extra cement, complete all as specified and directed.
S&F of steel structure/frame made of MS box/pipe sections ERW or induction butt weld tubers conforming to IS-1161-1979 grade st 240 as in columns, purlins and truss complete fitting as directed including one shop coat of red oxide primer and two coats of synthetic enamel paint, complete all as specified and directed.
Preparation of new or previously unteated surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete, all as specified and directed.
100mm thick, Plain cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in sub base to receive floors finishes, complete all as specified and directed.
M&L chequered cement concrete tile 20cm x 20cm x 19 to 20 mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finshes. Conforming to IS, complete all as specified and directed.
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Hard /dense soil complete all as specified and directed.
Plain cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
PCC 1:2:4 type B-1 (20 mm graded aggregate) as in roads kerbs including weathering, slightly rounded or chamfered angles and throating complete, all as specified and directed.
Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering etc.; to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-W (Gde-E- 250) quality-A, complete, all as specified and directed.
B Sreepathy Rao & Sons
BEKKAM CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .