CERTAIN BR REPAIR TO WATER SUPPLY AND SEWAGE INSTTALLATION UNDER AGE BR II OF GE (WEST) FEROZEPUR CANTT

Amount

Dismantling of brick tiles or terracing tiles, single layer on roof complete all as specified and directed.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L for mud phuska, 80mm thick average, consolidated thickness, on flat roofs including 25 mm thick mud plaster and 3mm thick leeping plaster complete all as specified and directed.

M&L 10mm thick rendering in cement mortar 1:4 on roof surfaces complete all as specified and directed.

Applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg per square metre including cleaning of surfaces complete all as specified and directed.

M&L 150 micron thick polythene film, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg /Sqm complete all as specified and directed.

M&L 40mm thick brick tiles laid on mud mortar (mud phuska) and joints grouted flush in cement mortar 1:3 mixed with 5% of cruide oil by weight of cement and pointed flush including leaping plaster complete all as specified and directed.

M&L except tiles for 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar 1:3 mixed with 5 % of crude oil by weight of cement on mud phuska and pointed flush as work proceeds complete all as specified and directed. Note :- Old brick tiles retreived from dismantling of ser item No. 01 to be reused.

M&L flush pointing to roof tiles in cement mortar 1:3 tiles including racking out joints complete all as specified and directed.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:6 on fair faces of brick work, finished even and fair without using extra cement complete all as specified and directed.

M&L 5mm thick rendering in cement mortar 1:3 on fair faces of concrete finished even and fair in ceilings complete all as specified and directed.

M&L preparation of newly plastered surface of wall and applying three coats of white wash over walls complete all as specified and directed.

M&L preparation of old plastered surface of walls and applying two coats of white wash over wall complete all as specified and directed.

M&L preparation of newly plastered surface of wall and applying three coats of white wash over ceiling complete all as specified and directed.

M&L preparation of old plastered surface of wall and applying one coat of white wash over ceiling complete all as specified and directed.

M&L preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint), any colour complete all as specified and directed.

M&L preparation of old painted surfaces of steel work of any description, not otherwise described, over 10 CM width or girth and applying one coat of synthetic enamel paint, any colour acomplete all as specified and directed.

Taking down chowkhats or frame not exceeding 1.5 sqm (without taking off shutter from the frames) complete all as specified and directed.

Taking down door chowkhat or frame exeeding 1.5 sqm but not exceeding 4 sqm shutter (without taking off shutter from the frames) complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 sqm area and not exceeding 2.00 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 sqm area and not exceeding 2.00 Sqm each and refixing in the same opening complete all as specified and directed.

Taking down existng steel gate exceeding 4 Sqm not exceeding 8 Sqm for repair etc and refixing in the same opening after necesary repair /replacement of unserviceable portion complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground (concrete, brick work, masonery etc.) complete all as specified and directed.

Excavating in post holes in soft/loose soil (or similer holes) each not exceeding 0.5 Cum getting out, returning filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed.

M&L plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggergate) as in foundations filling and mass concrete complete all as specified and directed.

S&F mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Tie bars with screwed ends, nuts, washers and mild steel paltes for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, complete all as specified and directed.

Fixing only chain link fencing including linewires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all specified and directed.

Supply only chain link mild steel galvanisd fencing, any size or type complete all as specified and directed.

S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. complete all as specified and directed. Note: Each line of wire shall be measured.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc as fixed in repairs complete all as specified and directed. Note: Each line of wire shall be measured.

S&F pressed steel frames made of 1.25mm thick mild steel sheet of profile 125mm x 60mm for door and window frames with one rebate including lock strike plate, shock absorbers, 20mm dia 60mm long mild steel conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

S&F pressed steel frames made of 1.25mm thick MS sheet of profile 105mm x 60mm for door and window frames with one rebate including lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in win-dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, ier aps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling) corbels, brackets, etc. (of any section indicated), with plain fair faces, E28 including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed.

S&F factory made 35mm thick, 2nd class hard wood (Hollock), plain framed, paneled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-8 complete all as specified and directed.

S&F factory made 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate inclunding fixing to existing steel or wooden frame complete all as specified and directed

S&F butt hinges, medium weight, cold rolled mild steel,100mm long and fixed complete all as specified and directed.

S&F mild steel pressed handles, oval type, stove enamelled black, 125mm long and fixed complete all as specified and directed.

S&F mild steel sliding door bolts plate type, stove enamelled black, with bright bolt not less than12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on length of bolt 250mm long staple plate and fixed complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and directed.

S&F wire cloth galvanised mild steel, 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

All as per ser Item No 45 here-in-before but in repairs complete all as specified and directed.

M&L painting to new wood surfaces of any description, over 10cm width or girth two coats with synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and directed.

M&L framed mild steel work of grade E-165 (Fe-290) as in framed work such as doors, gates or frame for cooler stand with gusset plates, rails, braces etc, drilled for fixing of sheeting or other covering of door etc, to be prepared for hanging or sliding etc including either hooks and hinges or steel hanging door fittings and hanging and fixing complete all as specified and directed.

S&F 16mm solid PVC board plain colour fixed with screws or adhesive with complete accessories as in shelves/partitions/cupbaord shutters etc including lipping work on exposed portion complete all as specified and directed. Makes : Sintex, Rajshri Plastiwood Ltd, M/s Dura Plast Extraction Pvt Ltd, M/s Fenesta, Kumar Arch Tech, H R enterprises.

S&F extruded Aluminium alloy handles, fabricated type, anodised 125mm long complete all as specified and directed.

M&L 125mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws but of aluminium anodised complete all as specified and directed.

S&F grating round 140 mm size of PTMT.(Minimum weight 50gms) complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15cm thick (below or above ground level) complete all as specified and directed.

M&L broken stone or boulder hardcore of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L plain cement concrete 1:4:8, type D2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed

M&L 50mm thick cement concrete 1:3:6, type C-1 (20mm graded stone aggregate) as in plinth protection shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.

M&L 40mm thick cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in floor topping, surfaces finished even and smooth without using extra cement including fixing of dividing strips complete all as specified and directed. Note: Dividing strips shall be measured and paid for separately under relevant item.

Supply only 38mmx3mm glass dividing strips as in floors complete all as specified and directed.

M&L machine pressed precast conctete interlocking paver block with gray cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over sand cushioning complete all as specified and directed. Note: Sand cushioning shall be measured and paid for separately under relevant item.

M&L sand filling under floors or in foundations including watering and consolidation complete all as directed.

Demolition of brick work built in cement mortar of any specification and in any position complete all as specified and directed.

M&L brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.

All as per Ser Item No 64 here-in-before but except bricks. Note: servicable bricks obtained form demolition shall be re-used.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for and removing debris outside MD land complete all as specified and directed.

M&L RCC (nominal mix) 1:2:4, type B1 (20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions Square, rectangular surfaces of concrete complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per ser item No. 69 here-in-before but 6mm to 8mm dia TMT bars, but as in strips

S&F factory made box type window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F factory made box type window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter steel handle and with without glazing bars both dovetailed or welded and with one shop coat of zinc chromate primer complete all as directed

S&F factory made steel ventilator side/top hung with glazing bars dovetailed or welded and with one shop coat of zink chromate primer complete all as specified and directed.

S&F framed work such as grills, gratings etc.. With ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming Fe 290, Gde -E -165 complete all as specified and directed.

M&L painting to new steel surfaces of any description, over 10cm width or girth two coats with synthetic enamel paint including preparation of surfaces complete all as specified and directed.

S&F low level flushing cistern, PVC (white), 10 liters capacity, with inlet ball float valve, PVC flush pipe and necessary fixing accessories including connecting to existing water pipe and WC etc in repair complete all as specified and directed.

S&F15 mm dia chromium plated shower rose, with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.

S&F wash hand basin, flat back 550mmx400mm vitreous china (white) including PTMT waste fittings of 32mm bore size, waste pipe PVC of 32mm bore, PVC connector 450mm longs with angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.

S&F tubular towel rail of Aluminium anodized 20mm dia, D type, 60cm long between flanges fixed to wall complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19mm x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15mm x 15mm MS square tube inside 19mm x 19mm MS square tube suitably screwed complete all as specified and directed.

S&F factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement and fixed in the frame at site complete all as specified in clause 8 B.2.1 of MES schedule Part-II (2004). Makes: Sintex, Rajshri Plastiwood Ltd, M/s Dura Plast Extraction Pvt Ltd, M/s Fenesta, Kumar Arch Tech, H R enterprises

S&F 100 mm long PTMT butt hinges, fixed with steel screws complete all as specified and directed.

S&F 150 mm long PTMT tower bolts, fixed with steel screws complete all as specified and directed.

S&F 150 mm long PTMT door handle, and fixed with steel screws complete all as specified and directed.

S&F aluminium, anodized 150 mm long barrel tower bolts of extruded section, complete all as specified and directed.

S&F soap dish of PTMT of any colour complete in repair complete all as specified and directed.

S&F waste coupling of PTMT for 32 mm bore dia of discharge pipe (half or full threaded (Minimum weight 32mm-45gms/40mm-60 gms in repair complete all as specified and directed.

S&F squatting pan Orrissa pattern vitreous China white of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore sand cast cast iron ‘P’ trap with 550 mm to 600 mm long neck for connecting WC to branch piece with cement joints, fixed in repairs, complete all as specified and directed.

Supply only liquid water proofing compound.

Dismantling floor, hearth or wall tiling including cement mortar beding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non-skid ceramic coloured tiles 7mm - 8mm thick (square or rectangular) area of eacch tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc.. Set and jointed in neat cement slurry and pointed in white or coloured cement. to match as in floors including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L Non-skid ceramic coloured tiles 7 mm - 8 mm thick (square or rectangular) area of eacch tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surfaces 300mm X 200mm and 7 mm thick set and jointed in cement slurry and pointed in white or coloured cement to match including 10mm thick back coat in cement mortar 1:4 complete all as specified and directed.

M&L machine cut kota stone slab flooring 20mm-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including notching / nosing / easing including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per ser item No 94 here-in-before but in skirting including 10mm thick plaster in cement mortar 1:4 complete all as specified and directed.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick screed bed in cement mortar 1:4 complete including moulding at corners and polishing complete all as specified and directed

M&L 25 mm thick for PCC Flooring using cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) below floor tile as in levelling course complete all as specified and directed.

Taking up or down 20mm steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F 20mm dia steel water tubes, medium grade galvanized, with all fitting and fixed to walls and ceiling or laid in floors including necessary cutting through walls and making good with cement mortar complete all as specified and directed.

All as per ser item No. 100 here-in-before but fixing only 20 mm dia tube any grade to wall and ceiling or laying in floors complete all as specified and directed.

S&F 15mm dia steel water tubes, medium grade galvanized, with all fitting and fixed to walls and ceiling or laid in floors including necessary cutting through walls and making good with cement mortar complete all as specified and directed.

All as per ser item No. 102 here-in-before but fixing only 15 mm dia tube any grade to wall and ceiling or laying in floors complete all as specified and directed.

S&F 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in repair complete all as specified and directed.

S&F 15mm bore stop valve standard of PTMT any colour high pressure screwed for iron pipe and fixed in repair complete all as specified and directed.

M&L 100mm dia Cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement diameter of outlet 75mm complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal of 110 mm bore including jointing with cement mortar 1:3 and making good complete all as specified and directed.

S&F water storage tanks 500 litres capacity, rotational moulded, triple layer polythene (cylindrical vertical with closed top) hoisting and fixed in position on roofs including dismantling existing water storage tank, complete all as specified and directed.

S&F water storage tanks 1000 litres capacity, rotational moulded, triple layer polythene (cylindrical vertical with closed top) hoisting and fixed in position on roofs including dismantling existing water storage tank, complete all as specified and directed.

S&F 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule in repair complete all as specified and directed.

S&F vitreous China bowl urinal flat back, size of 465 mm x 355 mm x 265 mm white (minimum), with grating and union for discharge pipe (including flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F low density polyethylene pipes (LDPE) 32mm dia of pressure rating 6 kg/cm2 laid in trenches complete all as specified and directed.

S&F PVC (SWR) pipes 100mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends of 110 mm bore dia any radius complete all as specified and directed.

S&F steel rolling shutter of 1.00 mm thickness of laths, without ball baring as specified including top cover, anchoring rod, hasp staples rolling grill and one shop coat of primer erected in position as as indicated completed pushpull or manual type complete all as specified as directed.

Manjeet Singh Contractor

M/s Mukand Lal Khanna

B.L. Chaudhri and Co.