REPAIR MAINT OF TILING, PLUMBING, JOINERY, PLASTERING ETC IN THE AREA OF AGE BR-II UNDER GE FAIZABAD

Amount

S&F in repair, 150/200mm size mild steel galvanised hasp and staple, fixed to steel almirah shutters by welding /drilling holes /nut & bolts or riveted arrangement to lock the almirah shutter complete all as directed by Engr-in-Charge.

S&F in repairs, MS work as in legs (as required) fixed to steel almirah by welding / drilling hole /nut & bolts or riveted arrangement including replacement of defective handle etc and painting to match the existing surfaces complete all as directed by Engr-in-Charge.

Taking down of chowkhats or frame with shutters (without taking off shutter from the frame) n.exc 1.50 Sqm each complete all as spd and directed by Engr-in-Charge.

Taking down of chowkhats or frame with shutters (without taking off shutter from the frame) exc 1.50 Sqm but n.exc 4.00 Sqm each complete all as spd and directed by Engr-in-Charge.

Taking down shutter of any description n.exc 1.00 sqm each leaf complete all as specified and directed by Engr-in-Charge.

Taking down shutter of any description exc 1.00 sqm but n.exc 2.00 Sqm each leaf complete all as specified and directed by Engr-in-Charge.

Refixing of shutter in the same opening of any description exc 1.00 sqm but n.exc 2.00 Sqm each leaf ncluding resecuring or easing & adjusting, complete all as specified and directed by Engr-in-Charge.

S&F mild steel framed work as in door frame or gates of angle or other section with gusset plates, rails, braces etc including drilling holes for fixing steel sheet or covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheet or other covering, running rails and guides) and hanging also fastening and fixing complete conforming to Fe 401-W (Gde-E-250) quality A) all as specified and directed.

S&F 2nd class hard wood 35 mm thick plain framed, panelled shutter (two no of panels) with lock rail and panel of 12 mm BWP commercial ply with size of rails and stiles as per IS -1003 (Part-1), kiln seasoned and chemically pressure treated, complete all as specified and directed by Engr-in-Charge.

S&F 30 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed by Engr-in-Charge.

S&F 2nd class HW 30mm thick glazed and skelton shutters with sash bars, open rebated and prepared to receive glass, gauze etc (any number of sash bars), edges of framing plain chamferred or rounded, fitted with cut & mitred beads for securing glass etc, sizes of member of shutter as specified in SSR Part-1, Section 8, Clause 8.20 complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frame (single rebated) of size 50mm x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube as shown on drawing complete all as specified and directed by Engr-in-Charge.

S&F factory made solid PVC doors shutter 30 mm thick (syles) consisting of frame made out of MS tube of top and bottom rals MS frame coverred with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck in side with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either sides & as gap insert for top rail & bottom rail, panelling of plain colour to be fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge.

S&F 150mm size Aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge.

S&F 150mm size Aluminium handles extruded type, anodised complete all as specified and directed by Engr-in-Charge.

S&F 100 mm size stainless steel butt hinges medium weight cold rolled complete all as specified and directed by Engr-in-Charge.

Taking down existing window of any description and S&F new factory made steel window with side hung shutters using z sections without glazing bar including box type hinges, two nos 100mm size steel handles & 75mm long tower bolts to each shutter and steel peg stay with & including one coat shop zinc chrome primer complete all as specified and directed by Engr-in-Charge.

Taking down existing window of any description and S&F new factory made steel window with side hung shutters using z sections with glazing bars, dovetailed of welded including box type hinges, two nos 100mm size steel handles & 75mm long tower bolts to each shutter and steel peg stay with & including one coat shop zinc chrome primer complete all as specified and directed by Engr-in-Charge.

Taking down existing cup board shutter of any description and S&F new shutter made of prelaminated particle board 18/19mm thick interior grade prelaminated with decorative choice lamination at one side & other side balancing white lamination, fixed with screws to timber frame work including wooden beading, lipping all around the cup board shutter complete all as specified and directed by Engr-in-Charge.

Taking down existing drawer, partitions, cup board shutters etc of any description and S&F new 18 mm thick one side laminated coloured PVC board including suitable iron / wooden fixing brackets, PVC strip lipping complete all as specified and directed by Engr-in-Charge.

S&F continous piano type hinges of 30mm width of flap (when opened), mild steel, bright finish or electro galvanised complete all as specified and directed by Engr-in-Charge.

S&F 100 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed by Engr-in-Charge.

S&F 100 mm size stainless steel,or aluminium alloy wire type hasp and staple including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge.

S&F in repairs, 40mm dia cupboard knob mild steel, bright finished and fixed with nut/ screw and washer complete all as specified and directed by Engr-in-Charge.

S&F sliding channel including necessary fittings and fixtures for drawers, fixed with prelaminated partice board complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description and in any position including cutting of reinforcement bars to facilitate demolition complete all as specified and directed by Engr-in-Charge.

M&L for provinding precast reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in cover slabs, shelves and similar acticles set in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

Demolition of brickwork or stone boulder masonary built in cement mortar or cement lime mortar including all pillars, arches etc complete all as specified and directed by Engr-in-Charge.

M&L for brickwork with old size sub class 'B' bricks in cement mortar (1:6), straight or curved on plan exc. 6m mean radius complete all as specified and directed by Engr-in-Charge.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engr-in-Charge.

M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 10 mm thick plaster in cement mortar (1:4) on fair faces of concrete surfaces of ceiling, finished even and smooth complete all as specified and directed by Engr-in-Charge.

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.

M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed by Engr-in-Charge.

M&L for preparing newly plastered surfaces of walls and applying two coats distemper oil emulsion over a layer of 1mm thick wall care putty (preparatory to distempering), complete all as specified and directed by Engr-in-Charge.

M&L preperation for old surfaces of wall by removal of existing decrative treatment of any description and applying two coats of oil bound distemper complete all as specified and directed by Engr-in-Charge.

M&L preparing of old plastered surface of walls and applying one coat of cement base paint complete all as specified and directed.

M&L for preparing old distempered surfaces of walls including washing rubbing down and stopping of existing surfaces and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of new wood or wood based surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new pre-primed steel and iron surfaces of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel and iron surfaces of any description over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description, not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for repairs to broken edges of roof projection, chajja, facia and simillars works, girth n.exc 30 cm with 15 mm thick plaster in cement mortar (1:4), finshed even and smooth and applying two coats of cement base paint complete all as specified and directed by Engr-in-Charge.

S&F in repair, viterous china wash hand basin, white, flat back, size 550 x 400mm with and including 32mm bore waste coupling with PVC waste pipe of 32 mm bore and brackets complete all as specified and directed by Engr-in-Charge.

S&F in repair ,15 mm dia bore cast copper alloy bib cock, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified and directed by Engr-in-Charge.

S&F in repair, 15 mm dia bore PTMT bib tap high pressure complete all as specified and directed by Engr-in-Charge.

S&F in repair, 15 mm dia bore concealed type cast copper alloy stop valve, cromium plated with long screwed shank and cup, screwed down, high pressure with crutch or butterfly handle, screwed down both ends for iron pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair, 15 mm dia bore cast copper alloy angle valve / stop valve with wall flange, fancy type, cromium plated, screwed down both ends for iron pipe complete all as specified and directed by Engr-in-Charge

Taking down old SWR pipes of any description and S&F new 75mm dia PVC (SWR) pipes, single socketed and fixed fixed to wall or laid in floors in any length with rubber ring joints including necessary PVS clamps complete all as specified and directed by Engr-in-Charge.

Taking down old SWR pipes of any description and S&F new 110mm dia PVC (SWR) pipes, single socketed and fixed fixed to wall or laid in floors in any length with rubber ring joints including necessary PVS clamps complete all as specified and directed by Engr-in-Charge.

S&F in repair, 15mm dia bore pillar tap, cast copper alloy, with capstan head chromium plated, screwed down high pressure with long screwed shank and fly nut and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair, 100mm size stainless steel grating with or without waste hole and fixed in position with white cement complete all as specified and directed by Engr-in-Charge.

M&L in repair, 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

S&F in repair, 15mm dia and 450mm long PVC connection pipe with PTMT nuts at both ends, complete all as specified and directed by Engr-in-Charge.

S&F in repair, vitreous china wash down water closet squatting pan (Orissa pattern) of size 630X450mm, white (excluding flush pipe, flushing cistern) , including connection to trap and flushing pipe anti-syphonage pipe etc and making good disturbed flooring to match existing floor, complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC low level flushing cistern 10 Ltr capacity syphonic action type , white with inlet ball valve float and handle including brackets complete and including PVC flush pipe 32mm dia low or high density for low level cistern complete all as specified and directed by Engr-in-Charge.

S&F in repairs, looking mirror of size 600mm x 450mmx 5.5mm thick fixed on 6mm thick commercial decorative water proofing ply wood with coloured PVC frame all around and hook complete all as specified and directed.

S&F in repair, stainless steel utensil/plate rack, made of 1 mm thick stainless steel sheet of size 900x900mm and fixed to wall with screws complete all as specified and directed by Engr-in-Charge.

S&F in repair, stainless steel sink with drainage board, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers including waste coupling, bedding in cement mortar (1:4) on dwarf wall or including fixing cantilever cast iron brackets, connecting union to pipe etc, overall size 915mm x 460mm with bowl size 410mm x330mm x 160mm complete all as specified and directed.

S&F in repair, 600mm long chromium plated towel rail 'D' type and fixed to wall with PVC ravel plugs and screws complete all as specified and directed by Engr-in-Charge.

S&F in repair, 125mm dia chromium plated shower rose with or without swivel joint, including fixing to steel pipe or union complete all as specified and directed by Engr-in-Charge.

M&L for cutting chases not exc 10 cm girth in brick walls, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or cutting chases for concealed water tubing or concealed conduit wiring etc and making good to match existing surfaces complete all as specified and directed by Engr-in-Charge..

Taking down galvanised tubing of 15 mm dia bore including cleaning for refixing in any position and S&F 15 mm doa bore medium grade galvanised steel tubing with all fittings and fixed to walls and ceiling or laid in floor including MS hooks as required complete all as specified and directed by Engr-in-Charge.

Taking down galvanised tubing of 20 mm dia bore including cleaning for refixing in any position and S&F 20 mm doa bore medium grade galvanised steel tubing with all fittings and fixed to walls and ceiling or laid in floor including MS hooks as required complete all as specified and directed by Engr-in-Charge.

Taking down and refixing 20mm dia steel tubing and connections in new or old position (walls, ceiling, floors etc) complete all as specified and directed by Engr-in-Charge.

S&F in repair, 20 mm bore PTMT ball valve (Minmum weight 210 gms), high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge..

S&F in repair, 25 mm bore PTMT ball valve (Minmum weight 455 gms), high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge..

Dismantling of water storage tank of capacity exc 250 but n.exc 500 ltrs and removing to store and S&F new 500 ltrs capacity rotational moulded (three layered) polyetheylne water storage tank, cylindrical vertical with closed top, hoisted and fixed in position with and including MS circular top cover made of 0.56 mm thick GI sheet for 500 litr capacity PVC tank, fixed with clip type bolt for locking arrangement for side openng and 50mm long nails with sharp edge on top of cover for protection from monkey complete all as specified and directed by Engr-in-Charge.

S&F in repair, 75 mm dia bore cast iron (sand cast) soil waste and vent pipes or fixed as in spouts in any length with or without ears with lead joints, fixed to wall or laid in floor etc complete all as specified and directed.

S&F in repair, 100 mm dia bore cast iron (sand cast) soil waste and vent pipes or fixed as in spouts in any length with or without ears with lead joints, fixed to wall or laid in floor etc complete all as specified and directed.

Taking down and refixing 75 mm dia bore cast iron soil waste and vent pipes or fixed as in spouts in any length with or without ears with lead joints fixed to wall or laid in floor etc complete all as specified and directed.

Taking down and refixing 100 mm dia bore cast iron soil waste and vent pipes or fixed as in spouts in any length with or without ears with lead joints fixed to wall or laid in floor etc complete all as specified and directed.

S&F in repair, 75mm dia cast iron bends, Tee or Y-shape branch pieces complete all as specified and directed.

S&F in repair, 100mm dia cast iron bends, Tee or Y-shape branch pieces complete all as specified and directed.

M&L for mild steel work as in hold fasts, clamps, stays and similar articles conforming to Fe 290, Gde E-165, complete all as specified and directed by Engr-in-Charge.

S&F in repair, 19/20 mm dia 202 grade stainless steel drapery / curtain rod, fancy type with PVC layer and two nos brass finish (Latto) and two nos brackets, fixed in any length with fixing arrangements complete all as specified and directed by Engr-in-Charge..

S&F in repair, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in steel / wooden / Z section windoow, ventilator & doors with necessary wooden beading / pin / nut & bolt including all necessary fixing accessories etc complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and S&F new 4.00 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in squares exc 0.50 sqm each pane up to three storey height complete all as specified and directed by Engr-in-Charge

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and S&F new 3.00 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in squares not.exc 0.50 sqm each pane up to three storey height complete all as specified and directed by Engr-in-Charge

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises complete all as specified and directed.

M&L for 25mm thick cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 7 to 8 mm thick (square/ rectangular) non skid joint free coloured ceramic floor tiles, area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm (size not less than 400 mm x 400 mm), laid in flooring over and dincluding 15mm thick screed bed or bedding layer, set and jointed in neat cement slurry and pointed with coloured cement with pigment to match the colour of tiles, complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles 300X450X7mm thick in vertical surfaces over and including 10mm thick rendering in cement mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.

S&F in repair, 150 mm ordinary rat tail rod pattern spring (Helical door spring)including roller and roller plate and necessary welding (if required) etc complete all as specified and directed by Engr-in-Charge.

S&F in repairs/replacement 15mm bore brass CP wall mixer 3 in 1/center hole mixture including all accessories like leg, spendal, extension nipple, connector etc complete all as specified and directed.

S&F in repairs/replacement 15mm bore brass CP wall mixer 3 in 1 system with and including hand/Telephonic shower without overhead shower with long bend pipe, connecting legs & wall flange for mixing hot & cold water screwed down for iron pipe and fixed complete as per sample approved by GE/AGE all as specified and directed by Engr-in-Charge.

S&F in repair / replacement, 15mm bore cast copper alloy chromium plated e wash hand basin mixer for mixing hot and cold water, screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

M&L for repairs to aluminium door/ window re-arange /replacement of damaged rubber beading and tightening etc and refixing in the same opening, area of each door / window n.exc 2.0 Sqm including necessary fittings and fixture, locking arrangement complete all as specified and directed.

S&F in repair, 32/40 mm bottle trap for WHB of brass chromium plated having minimum water seal 25mm as approved by GE/AGE complete all as specified and directed by Engr-in-Charge

S&F in repair, chromium plated health faucet for pedestal pattern WC, screwed down high pressure including 1.00 m long flexible CP pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair, chromium plated jet for pedestal pattern WC with 1.00 m long flexible pipe, screwed down high pressure complete all as specified and directed by Engr-in-Charge.

S&F in repair, vitreous china wash down closet (pedestal pattern), white (including seat cover but excluding flush pipe, flushing cistern), including trap and drain and flushing pipe anti-syphonage pipe, seat cover etc, complete all as specified and directed by Engr-in-Charge.

S&F in repars, plastic water closet seat cover, coloured/white, closed pattern with flat bottom and cover fixed with mild steel chromium plated or aluminised hinging device, complete all as specified and directed by Engr-in-Charge.

S&F in repair, aluminium anodised frame and shutter for doors, windows, ventilators with one or more rebates including jointing cleat, anodised aluminium snap beading and glazing clips for fixing of glass pane complete all as specified and directed..

S&F 200 mm long aluminium handle, American type, fixed with screws complete all as directed by Engr-in-Charge.

S&F 100mm size stainless steel hinge, fixed with screws complete all as specified and directed.

S&F rubber beading suitable for fixing 5 mm thick sheet glass in aluminium door, window / ventilator shutter complete all as specified and directed by Engr-in-Charge.

S&F 6.5mm thick aluminium grill of pattern Deco - DG-104 surrounded by F-channel of 1.2 mm thick, complete all as specified.

S&F in repair, MS cover 0.56 mm sheet circular cover for PVC tank of 300/500 ltr capacity fixed with clip type bolt for locking arrangement for side opening with 50mm long nails with sharp edge on top cover for protection from monkey complete all as specified and directed by Engr-in-Charge.

S&F in repair, MS handles (Left or right turn), hinges, pegs, stay etc with necessary welding and make fully fuctional / openable shutter of steel windows complete all as specified and directed by Engr-in-Charge.

M&L for MS work as in hold fasts, clamps, stays and similar articles conforming to Fe 290 Gde E-165, complete all as specified and directed by Engr-in-Charge.

Taking down old rolling shutter of any size and description and S&F new steel rolling shutter 1.25mm thick, without ball bearing, including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, gear operated type with bevel gear box and crank handle (excluding safety lock & ball bearing) complete all as specified and directed by Engr-in-Charge.

S&F mild steel safety lever lock with 4 levers for rolling shutters and fixed complete all as specified and directed by Engr-in-Charge.

S&F ball bearing for rolling shutters complete all as specified and directed by Engr-in-Charge.

S&F in repair, chromium plated toilet paper holder fixed with screws complete all as spd and directed

S&F in repair, aluminium sliding window lock of suitable size and fixed complete all as specified and directed by Engr-in-Charge.

S&F 5.5 mm thick sheet glass ordinary quality, exc. 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge. Note: Rubber beading (if required) to be measured separately under respecive item of this BoQ.

S&F 300mm size MS sliding door bolt, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engr-in-Charge.

S&F 300mm size aluminium alloy, anodised, sliding door bolt with hasp & staples (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any position and M&L for PCC (1:3:6) type C1 (using 20mm gradded stone aggregate) as in cills, copings, steps, seismic and other bands, plinth course, bed blocks for hold fasts, lintels etc complete all specified and as deirected by Engineer-in-Charge.

S&F in repairs, 5.50mm thick sheet glass ordinary quality exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge. Note: Rubber beading (if required) to be measured separately under respecive item of this BoQ.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

Saket Traders

awashyakta enterprises

M/S AVADH ENTERPRISES

ABC CONSTRUCTION CO

R K BROTHERS

J R ENTERPRISES

Jairajyadav security services

JYOT BUILDERS