SPECIAL REPAIR TO BLDG NO 301 AT NAVAL STATION KARANJA

Amount

Dismantling floor hearth or wall (ceramic/mosaic) tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and directed.

S&F vitrified ceramic tiles (light shade) 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 20mm thick screed bed in CM 1:6. Complete, all as specified and as directed.

S&F vitrified ceramic tiles (light shade) 10mm thick (square/rectangular) polished, area of each tiles not exceeding o.36 sqm, vertical surfaces such as skirting, dado and risers to steps etc incl 10mm thick screed bed in CM 1:4. Complete, all as specified and as directed.

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6)

S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface

Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar

M&L for 16-18mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick Screed in CM (1:4)

M&L for rounding to edges as bull nose of any type stone slabs one edge, such as in steps, cooking platform, and other similar situations.

M&L for machine cut cdappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 15 mm thick Screed in CM (1:4), complete all as specified and directed.

Taking down & Removing to Store Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet reinforced with M.S Square tube, in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing.

S&F Aluminium handles 125mm size, cast type, anodised. Complete all as specified and as directed by EIC.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section.

S&F 75mm butt hinges stainless steel complete all as specified and directed by EIC.

Dismantling boarding, any description, fixed in any position with screws

M&L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in kitchen cabinet/wardrob shutter/shelf/loft shutter etc including hinges, 40mm dia know and beading on edges.

M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in kitchen cabinet shelf.

S&F 150mm stainless steel decorative type handle for cupboards/wardrobs.

S&F Brass Locks 4 levers, cupboards/wardrobs/drawers, grade I, size 65 mm

S&F Brass knobs 35-40mm dia

S&F magnetic catch including all fittings.

S&F Aluminium anodised Tubular towel rail 20mm dia for cup boards/wardrobs incl brackets and all necessary fittings etc.

Taking down & Removing to Store Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames)

S&F 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints supplied and fixed.

M&L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old of any description and girth, not otherwise described and treated with tar or coal tar black paint.

M&L for Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, hold fast, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weathering’s, throttling etc. and setting in CM(1:4) with joints to match. Complete all as specified and directed.”

S&F MS hold fast similar small articles confirming to Fe 290 Gde -E- 165.

S&F 40 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides

S&F 2nd class hardwood 35mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats, complete, all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

S&F Aluminium handles 150mm size, cast type, anodised

S&F overall length of cover plate 150mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring fixed in floor.

S&F 100mm butt hinges stainless steel complete all as specified and directed .

M&L for preparation of new wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete, all as specified and directed.

S & F night latch 7 lever Godrej brass locking mechanism steel body with scratch resistant powder coated finish of size 98mm x 67mm x 28mm as in repairs all as specified and directed.

S&F in repair magic eye incl all necessary fittings.

Taking up or down steel tubing & connections, including cleaning & Refixing old steel tubing & connections in new or old position (Walls, ceiling, floors, etc.) of 15mm bore

Taking up or down steel tubing & connections, including cleaning & Refixing old steel tubing & connections in new or old position (Walls, ceiling, floors, etc.) of 20mm bore

S&F 20mm outer diameter of pipe 3 layer PPR Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobid fusion welded having thermal stability for hot & col water supply including all PPR plain 7 brass threaded polyporopylene random complete to wall, ceiling or in floors etc. Complete all as specified and directed by EIC.

S&F 32mm outer diameter of pipe 3 layer PPR Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobid fusion welded having thermal stability for hot & col water supply including all PPR plain 7 brass threaded polyporopylene random complete to wall, ceiling or in floors etc. Complete all as specified and directed by EIC.

Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wall

S&F in repairs CP Bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type

S&F in repair Stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions

S & F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type angle cock with long shank & cup (concealed type), complete all as specified and directed.

S&F flexible jet shower, 25mm dia including CP flexible pipe 1.20m long heavy duty and hook incl twin one tap all necessary fittings complete all as specified and directed by Engineer-in-Charge.

S&F toilet paper holder, brass chromium plated, fixed to walls with chromium plated brass screws. Complete all as specified and as directed.

S&F soap dish, chromium plated, fixed to plugs with chromium plated brass screws. Complete all as specfied and as directed.

S&F sheet glass shelf assemble consisiting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard railing 60cm long. Complete all as specified and as directed.

S&F in repar Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed in repairs complete all as specified

S & F in repair wash hand basin brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed. complete all as specified and directed.

S&F in repairs Brass CP shower rose 125mm size

S&F repair 20mm dia CP towel rail 600mm long incl all fittings complete all as specified and as directed.

S & F in repair drapery rod powder coated 25mm internal dia with bracket incl decorative brass end knob etc and fixed on wall. Complete all as specified and directed

S&F in repairs 40mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S&F in repairs 32mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S & F in repairs stainless steel kitchen plate rack of size 1 mm thick (18 gauge) complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets

S&F PVC connections 15mm size with PTMT nuts of length 450mm

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste; including bedding in CM to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F in repairs PVC looking mirror cabinet complete all as specified and directed. (Note: size as per approved by site requirement)

S&F aluminium door/ window/ventilator/partition shutters, made out of extruded power coated aluminium sections weighing 0.55kg/m, with sliding or openable shutters including frame and necessary joining cleats, glazing clips, rubber packing, power coated aluminium snap beading, screws etc. Complete and also including the following powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hook & eyes, peg stay and handles connected items wtih and including, complete all as specified and directed. Notes:- (i) Minimum thickness of powder coating shall be 15 micron for widows and 25 microns for doors. (ii) Rubber beading shall be measured and paid for separately. (iii) Design of door, window and ventilator shutters and sections to be used in their fabrications shall be as approved by the Engineer-in-Charge/GE.

S&F Sheet glass 4.0mm thick, ordinary quality in square n exc 0.5 sq.m in each pane

S&F Sheet glass 4.0mm thick, ordinary quality in square but exc 0.5 sq.m in each pane

S&F rubber beading suitable for fixing 4mm/5mm thick glass in panels of aluminium doors/windows/ventilators. Complete all as specified and directed.

S&F aluminium louvers with levers and locking arrangement suitable for fixing 100mm wide4 to 6 nos glass complete all as specified and directed.

S&F star lock for window incl all necessary fittings complete all as specified and as directed.

S&F in repair aluminium (anodized) grill of design DG 104 pattern, made out of 10mm thick dia, rod fixed with and inclding standard aluminium frame of 'F' section of size 23.40mm x 15.30mm and 1.4mm thick all as per manufacturers instructions and as specified and directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm with aluminium wire staples

S&F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm with aluminium wire staples

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for 20mm thick ready mixed cement base plaster (1:4) on external surfaces incl chajja of brick work or concrete surfaces. Complete all as specified and directed.

M & L for rendering 5 mm thick in cm 1: 3 on concrete surfaces as in ceiling finished even and smooth without using extra cement.

M & L for 15 mm thick ready mixed cement base plaster (1:6) on internal surfaces on brick or concrete surfaces.

M & L for preparation of new/old distempered surfaces of walls including washing, rubbing down and stopping of nail holes and applying two finishing coat of oil bound distemper (oil emulsion) on walls, incl 3mm thick wall care putty. complete all as specified and directed.

M & L for preparation of new/old plastered or unplastered surfaces of ceilings including cornices, etc and applying three finishing coat of white wash complete all as specified and directed.

M & L for preparation old/new decorated surfaces of wall/ceiling done by mechanical means/smart painting technique to include brooming down etc wash the surface thoroughly,filling compound suggested by manufactures and applying two coat of acrlic latex base exterior grade (100% ACRYLIC) over a coat of primer at any height including necessary scaffolding complete all as specified and as directed by ENGINEER-IN-CHARGE MAKE: DULUX WEATHER GUARD OR EQUIVALENT NOTE: Mechanical means/smart painting shall be done by authorised,certified applicator of paint manufactures of paint used.Approval shall be obtained from ge for make/manufactuerer and applicator before engaging in the work.

Taking down 110mm pipe any type incl all fittings.

Taking down 75mm pipe any type incl all fittings.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall.

S&F 100mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stay, including bolts and nuts and securing ends of stay to wall or roof.

S&F 75mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stay, including bolts and nuts and securing ends of stay to wall or roof.

S&F 110mm dia PVC (SWR) bends.

S&F 75 mm PVC (SWR) bends any radius.

S&F 110mm PVC (SWR) branch piece single (single Y) equal or unequal.

S&F 75 mm PVC (SWR) branch piece single (single Y) equal or unequal.

S&F 110mm PVC (SWR) branch piece double (double Y) equal or unequal.

S&F 75 mm PVC (SWR) branch piece double (double Y) equal or unequal.

S&F 110mm dia PVC (SWR) vent cowl.

S&F 75mm dia PVC (SWR) vent cowl.

S&F 110mm dia PVC (SWR) couplers.

S&F 75mm dia PVC (SWR) couplers.

S&F in repair PVC (SWR) floor trap75 mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S&F in repair PVC (SWR) Nahani trap 110mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

Demolition of cement concrete of any description in any position, concrete filling in sunken floor.

M&L for PCC 1:3:6 type C-2, using 40mm graded stone aggregate as in foundation, filling and mass concrete for sunken portion complete all as specified and as directed.

Roughening surfaces of old concrete by sweepping clean and washing down with water to remove dust

M&L for 20mm thick rendering in fair faces of brickwork or concrete surface in CM 1:4 with water proofing compound. (Note: WPC shall be paid separately)

M&L for plain cement concrete 1:2:4 type B0 ( using 12.5 mm graded stone aggregate ) in sunken floors 30mm thick complete all as specified and directed.

M&L for applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical surfaces and floor of sunken slab after laying all CI connection branch pieces etc after covering joints with PCC 1:2:4 mixed with WPC.

S&F in repairs Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) including necessary lime concrete, complete, all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe) incl all fittings complete, all as specified and directed.

Dismantling water tanks and removing to store exc 1000ltr and nexc 2000 ltrs.

s& F Rotational moulded polyethylene water storage tanks 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S& F for 20mm bore dia of pipe Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced)

M&L for 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in sub base / plinth protection , finish even and fair, complete, all as specified and directed.

Dismantling of Stone slabs & tiles of any description or thickness in floors/steps/skirting/dado, aprons etc. Laid dry or laid dry & pointed

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado & pillar including 15mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete, all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying one coat of synthetic enamel paint , complete, all as specified and directed

M&L for preparation of new steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide, zinc chrome, complete, all as specified and directed.

M&L for preparation of old painted steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete, all as pecified and directed.

S&F hand rail cover of PVC nexc 100mm in width.

S & F loft type water storage tank ISI marked of capacity 250 ltrs hoisted and fixed in position including PTMT float valves of 15mm dia, high pressure with polythene float and fly nut complete, screwed for iron pipe of brass ferrule and fixed in 15mm bore GI tube etc complete all as specified and directed including taking down old tank.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165

S&F Rolled mild steel Roof trusses (framed), trussed purlins crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. GDE Fe410-0 or Fe 310-O

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165

Dismantling Asbestos cement/PGI (corrugated, semicorrugated, etc.) sheets in roof coverings

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Demolition Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including all fitting. Complete all as specified and directed.

S&F at any height false ceiling of 15mm thick FINE FISSURED board shaped mineral fibre acoustic false ceiling tiles with back of duly sanded and finished with a coat of protective paint and front duly finished of ARMSTRONG/ NITHOBO false system of size 600x600mm having noise reduction co-efficient of 0.55, light reduction of 80 %, thermal conductivity k=0.057 W/WC and humidity resistance of 99% fixe lock PVC dle KL-24 suspension system (hot dipped galvanised steel section) of exposed T section grid with exposed face almn powder coated white colour. The suspension system consisting of parameter wall angle of size 24x24 mm of thickness 0.45 mm of GS sheet to secure on walls/partition face with the help of rawl plug @ 450 mm c/c universal main runner of T shaped section with single rotary stiching of size (38x24 mm) made from 0.33 GS sheet of length 3.60 m to be spaced at 1200 mm c/c runner T shape with double rotary stiching of size (30x24 mm) of length 1200 mm made from 0.25 mm thick GS sheet spaced @ 600mm c/c (1200x600mm) of size modules intermediate T shaped cross runner of size 25x24 mm of length 600 mm made of 0.25 mm thick GS sheet to form 600x600 mm size of modules including suspension of the ceiling frame from RCC roof / structure frame with soffits and angle cleat and dash fasteners and required members of GI suspender of 4 mm dia GI wire and level adjuster all complete and including cost of making opening for light fittings diffuser cut out etc. to required line and shape as per manufacturer recommendation and architectural drg complete all as specified and directed.

Removal of existing water proofing treatment any description up to concrete surface of roof slab including cleaning, with wire brushing, watering, removal of debris upto 1500 m distance complete all as specified and directed NOTE :- Unit rate quoted shall also include for removal of PVC water storage tank wherever existing carefully and refixing at the same or other position after completion of roof repair work

Surface preparation: Clean the surface throughly using mechanical tools and the surface to be free of dirt, oil. Repair all cracks by cutting "V" groove and fill the gap using repair mortarshaliFix FRRM provide 75mmx75mm coving/angle fillet using the above repair mortar using ShaliSBR latex as bond coat. All construction joints to opened 15mmx15mm and treated with repair mortar ShalifixFRM and Honeycombing to be pressure grouted with ShaliGrout IP. WATER PROOFING APPLICATION: The surface to be free from standing water prime the surface with shaliUrethane BTD white @400gm/sqm dilute with water 1:1 apply Ist coat of Shaliurethane BTD white at 1kg/sqm. Place 40 GSM Geotextile/FG tissue as reinforcement followed by IInd coat of ShaliUrethane BTD white at 1kg/sqm ensurre final curing of 36 hrs before carrying any further work. Extend waterproofing treatment and terminate at the top of edge of the parapet wall. Seal the groove using repair mortar. NOTE: (i) ShaliUrethane BTD (UV stable polyurethane waterproof liquid membrane). (ii) ShalifixFRM (Fiber Reinforced Polymer) (iii) ShaliSBR Latex (Latex Based bonding agent) (iv) Shaligrout IP (No shrink cementatious injection grout)

Supply only water proofing compound

Taking down carefully copper / aluminium point wiring (light, fan socket or power) through steel / PVC conduit / casing caping including complete fittings such as switches, ceiling roses, pendants, regulators, sockets, buzzer, bell, switch sockets, etc removing and making good to the disturbed surfaces of walls/ceiling etc, with its original specification complete all as specified and directed.

Point wiring with single core 1100 volts grade 1.5 sqmm size PVC FRLS insulated unsheathed stranded copper conductor cable using color code drawn through conceiled pvc conduit with all modular accessories like metal flush box,cover plate frame plates of suitable sizes Complete all as specified in and including 1.5Sq mm PVC insulated unsheathed copper conductor cable for continous earth conductor (using green colour)to common earth and connecting to earth dolly for the following NOTE- The rates includes for Neccessary wall cutting chasing .

(a) One light /fan/ call bell point controlled by one switch

(b) One 5 pin socket outlet 5 Amps on independent board

(c) One 5 pin socket outlet 5 Amps on same board

(d) One light point controlled by 2 way switch SP, 5 Amp, 240 Volts

Ditto all as per item No 132.0 above, but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FRLS PVC 1.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board.

Ditto all as per item No 132.0 above, but with 4 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FRLS PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board.

S & F switch modular single pole one way, 6 Amp (ISI marked) all as complete all as specified and directed by Engineer-in-Charge

S & F modular switch flush button, single pole two way, 6 Amp (ISI marked) complete all as specified and directed by Engineer-in-Charge

S & F modular bell push flush type 6Amp (ISI marked) all as specified and directed Engineer-in-Charge.

S & F modular socket outlet 15 Amp, 5-in-1, controlled by one switch (ISI marked) complete all as specified and directed by Engineer-in-Charge.

S & F modular socket 2 in 1, 3 pin, 6 Amp flush type (ISI marked) complete all as specified and directed by Engineer-in-Charge.

S & F switch modular single pole one way,16 Amp (ISI marked) all as complete all as specified and directed by Engineer-in-Charge

S&F ceiling rose PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals

S & F ding dong door bell electric suitable for AC 230 volt, single pole complete a all as specified and directed by Engineer-in-Charge.

S & F modular type fan 5 step regulator for ceiling fan complete all as specified and directed by Engineer-in-Charge.

Supply and fix LED batten with 24W LED tube light in wall/surface connecting with all required accessories like PVC box base,flexible cable from ceiling rose etc Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver and including LED tube rod.as directed and specified by engr-in-charge.Make havells CT PT NO- LHEDAAP7PW1W024 or equivalent in CG/C&S

Supply and fix LED batten with LED tube light in wall/surface connecting with all required accessories like flexible cable from ceiling rose etc as directed and specified by engr-in-charge.Make LHEXBXPNIN1WO10 HAVELLS i or equivalent in CG/HAVELLS/bajaj

S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 2+6 way double door open able, including taking out old unsv MCB DB any size/type.

S&F 6 to 32 AMP MCB single pole 240 V 10 KA (C-Series)

S&F MCB SPN 240 volts AC 32 -40Amps (C-series) as per requirement of AMP directed by engr-in-charge

M&L for wiring for circuits/sub main wiring with FRLS PVC insulate sheathed 2 x 6 sqmm stranded copper conductor cable 1100 volts grade heavy duty drawn into PVC conduit with 4 sqmm PVC insulated green copper cable for continues earth PVC pipe not less than 25 mm dia with all accessories complete

Supply and fixing NON METALIC exhaust fan single phase 250mm sweep Make-Ventil Air DXWHT/BLK.and making necessary cutting and chasing to make holes on wall to fix the fans as directed and specified by Engr-in-charge.

Taking down ceiling fan and keeping in safe custody for reuse and refixing the same after duly painted and marking of MES number on ceiling fan of size 1200mm sweep complete with connected accessories as directed and specified by engr-in-charge .make-havells

Taking down geyser and keeping in safe custody for reuse and refixing the samed after duly painted and marking of MES number on geyser 25ltr including all connected accessories like pvc connection hot/cold water etc all as directed and specified by Engr-in-charge

Supply and fix LED wall mounting chrome finish fixture with textured glass with 5 w led lamp MAKE-HAVELLS ct pt no-LHFHCHEITLIW020 or equivalent in bajaj/CG

Supply and fix sheet metal enclosure with socket plug top and 20 amp single pole MCB complete all as specified and directed .

Supply and fix LT PANEL consisting space to fix TPN DB and 5 nos meter and providing 5 nos MCB DP 40 with enclosure for protection of METER . single door fixed type wall mounted PTTA A DLEC model/or equivalent, CRCA sheet enclousure .The rates including taking down old meter and connecting in new panel with required wires with out any extra cost complete all as specified and directed.The panel should cosists of the following :-INCOMING (1) MCCB 63 AMP 4 P 25 Ka thermal magnetic based with o/c,s/c protection & ROH -01 nos (2) Indicating lamps RYB-03nos(3) 6 amp MCB sp-03 nos. OUT GOING :(1) 40 amp MCB DP 10 ka with enclosure-04nos.(2)Space for refixing existing electrical meter -05nos .MCB sp 6amp-01 nos.NOTE-Contractor should visit the site and to prepare panel as per size required to fit in below stair case complete all as specified and directed by Engr-in-charge

KG ENTERPRISES

REALTECH PROJECTS

Atul Enterprises

Shri Krishna Trading Corporation