Renovation and Beautification of Park in village Harsaru Ward No. 24 Zone 1 MCG

Amount

NS Item

-Providing and fixing precast concrete circular table with four sitting consists of 2 Nos. support in grey cement table of size 1000mm dia x 50mm thickness in terrazzo finish and four Nos. curved sitting of size of length 1000 mm, width 350mm thickness 50mm in terrazzo finish. overall dimensions 800mm, height of sitting 450mm, table consist of attachment for umbrella all segment are reinforced with 8mm TMT steel, as per drawing. The rates are inclusive of all taxes like GST, Transportation, carriage loading and unloading complete in all respect to full satisfaction of engineer- in- charge.

Pull Chair and Push Chair ( Two in one ) 1. Dimensions (LxWxH) 1800 x 700 x 1800mm. 2. Fabricated with main post of NB 100mm (G.I) 'C' Class pipe of approved make. 3. Seat main frame of NB 50 mm (G.I.) 'C' Class pipe, Pipe connecting main post with handle frame of NB 65mm (G.I.) 'C' Class pipe. 4. Handle frame of pipe NB 32mm and NB 25mm (G.I.) 'C' Class. (NB stands for nominal bore i.e. internal diameter of pipe in millimeters. 5. All pipes are powder coated with 80-120 micron thick akzo Nobel or equivalent paints. 6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs. 7. Zinc primer paints is applied at all the welding points prior to finishing. 8. Handle bars are provided with high end quality rubber grips. 9. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness UV resistant and colored. 10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00mm thickness, coloured, UV resistant and environment friendly. 11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 12. The equipment are fitted with inbuilt limiters to prevent unwanted movements. 13. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 15. High tensile steel with galvanized nut bolts are used for assembly. 16. Equipment made to GS mark, EN16630, DIN 79000 & ISO 14001 international standard for outdoor fitness equipment. 17. Self-explanatory stainless steel label fixed on equipment for ease of use. The rates are inclusive of all taxes like GST, transportation and installation in CC complete in all respect.

Horse Rider and Air Swing- 1. Dimensions (LxWxH) 1500 x 900 x 1100mm. 2. Fabricated with main post of NB 100mm (G.I) 'C' Class pipe of approved make. 3. Horse Rider main frame of NB 65mm (G.I) 'C' Class pipe Handle support frame of NB 50mm and other pipes of NB 32mm & NB 25mm (G.I) 'C' Class pipe. 4. Air Swing leg support frame of NB 50mm (G.I) 'C' Class pipe, Handle support frame of NB 32mm & NB 25mm (G.I) 'C' Class pipe (NB stands for nominal bore i.e. internal diameter of pipe in millimeters). 5. All pipes are powder coated with 80-120 micron thick akzo Nobel or equivalent paints. 6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs. 7. Zinc primer paints is applied at all the welding points prior to finishing. 8. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness UV resistant and colored. 9. Foothold for Horse Rider made of NB 32mm (G.I) 'C' Class Pipe 10. Foothold for air swing made of MS Sheet Metal with rounded edge to percent impact and injury. 11. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00mm thickness, coloured, UV resistant and environment friendly. 11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 12. The equipment shall be fitted with inbuilt limiters to prevent unwanted movements. 13. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts made of 18mm thickness. 14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 15. High tensile steel with galvanized nut bolts are used for assembly. 16. Equipment made to GS mark, EN16630, DIN 79000 & ISO 14001 international standard for outdoor fitness equipment. 17. Self-explanatory stainless steel label fixed on equipment for ease of use. The rates are including of all taxes like GST. transportation and installation at site of work to full satisfaction of Engineer in charge.

-Chain Swing (2 seater): 10’L x 5’.5W x 8’.5 H. Horizontal frame & vertical legs is of G.I pipe of jindal make 2” x 12 gauge. It stays with G.I pipe 1” x 12 gauge. Swinging seats-2 nos is of FRP molded Seat of 2mm thick fitted with m.s pipe ½” frame x 12 gauge which hang with G.I chain 6mm thick duly plated with ball bearing & m.s flat 6mm thick housing with suitable PU Primer & PU Paints. The rates are inclusive of all taxes with 2 years defect liability period free of cost to full satisfaction of engineer in charge.

Dips/Chair ad Push Chair:- 1. Dimensions (LxWxH) 1400 x 1200 x 2100mm. 2. Fabricated with main post of NB 50mm (G.I) 'C' Class pipe of approved make. 3. Main frame of NB 50mm (G.I) 'C' Class Pipe. 4. Leg support of NB 32mm (G.I) 'C' Class Pipe and other support of NB 25mm (G.I) 'C' Class Pipe. (NB stands for nominal bore i.e. internal diameter of pipe in millimeters). 5. All pipes are powder coated using akzo Nobel or equivalent paints of 80-120 micron thick . 6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs. 7. Zinc primer paints is applied at all the welding points prior to finishing. 8. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 9. Once the concrete is set, the equipment is fixed on to it . 10. High tensile steel with galvanized nut bolts are used for assembly. 11. Equipment made to GS mark, EN16630, DIN 79000 & ISO 14001 international standard for outdoor fitness equipment. 12. Self-explanatory stainless stell lable fixed on equipment for ease of use. The rates are inclusive of all taxes like GST, Transportation, Installation at site complete in all respect to full satisfaction of engineer in charge complete in all respect.

-Wave Slide: 9’.5 L x 5’H. Wave slide is of molded Fiberglass Reinforced Plastic (FRP) of 6mm thick and climbing ladder is of G.I pipe jindal make 1” x 12 gauge & G.I rectangular pipe 65 x 25 mm box X 16 gauge as climbing steps which support with 1”.25 sq. pipe x 14 Guage with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site including defect liability period of 2 year free of cost complete in all aspect.

-Dips/ Chin Up/ Push Ups ( 3 in One Machine ) :- 1. Dimensions (LxWxH) 1400 x 1200 x 2100mm. 2. Fabricated with main post of NB 50mm (G.I) 'C' Class pipe of approved make. 3. Main frame of NB 50mm (G.I) 'C' Class Pipe. 4. Leg support of NB 32mm (G.I) 'C' Class Pipe and other support of NB 25mm (G.I) 'C' Class Pipe. (NB stands for nominal bore i.e. internal diameter of pipe in millimeters). 5. All pipes are powder coated using akzo Nobel or equivalent paints of 80-120 micron thick . 6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs. 7. Zinc primer paints is applied at all the welding points prior to finishing. 8. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 9. Once the concrete is set, the equipment is fixed on to it . 10. High tensile steel with galvanized nut bolts are used for assembly. 11. Equipment made to GS mark, EN16630, DIN 79000 & ISO 14001 international standard for outdoor fitness equipment. 12. Self-explanatory stainless stell lable fixed on equipment for ease of use. The rates are inclusive of all taxes like GST, Transportation, Installation at site complete in all respect to full satisfaction of engineer in charge complete in all respect.

Bidder Name

Amount

Manoj Kumar Pahuja(GSTN-06AGSPP3074F1Z4)

SARWAR CONTRACTOR(GSTN-NA)

CHHOTU RAM CONTRACTOR(GSTN-NA)

Sh. Dubeshwar Pandit, Contr(GSTN-NA)

Sh. Dubeshwar Pandit, Contr

Manoj Kumar Pahuja

SARWAR CONTRACTOR

Sh. Dubeshwar Pandit, Contr

Manoj Kumar Pahuja

CHHOTU RAM CONTRACTOR