COMPREHENSIVE MAINT B/R AND E/M WORKS OF CERTAIN MD ACCN IN ZONE C AREA AT NDA KHADAKWASLA

Amount

Dismantling floor or wall tiling of any description and size including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc including cleaning off premises where complete all as specified and directed.

Demolition of brick / block masonry / Stone masonry built in Cement mortar complete all as specified and directed.

Taking down chowkhats or frame not exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 sqm each complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets andincluding re-fixing in position complete all as specified and directed.

Supply and fixing of 12mm thick Lafarge Gypsum board suspended Ceiling system (India gypsum make) with ISI grade GI framing of intermediate channel 15X45X15X0.9mm, perimeter channel and ceiling angle 25X10mm section with connecting clip 2.64mm dia including all hardware i.e soffit cleat,rawl plug, edge bead,angle bead,nut &bolt drywall screws, hangers etc with all hanging accessories, cut out to made for lighting, fixture and AC grills etc complete all as specified and directed.

M&L for 5mm thick POP punning on ceiling surface and applying two coats of plastic emulsion paint in approved shade over a coat of primer using roller etc complete all as specified and directed.

S&F wooden panelling made of 25x60 mm aluminium battens @ 600c/c covered with 12mm ply covered with 4mm thick zebrano veneer of approved shade including one coat of fire resistant paint on all framming and melamine polish by approved two coat to entire satisfaction etc complete all as specified and directed.

M & L First class soft wood Moulding area of nexc 6 sqcm as in cornices, picture rails and the like fixed with screws complete all as specified and directed.

M & L First class soft wood Moulding area of exc 13 sqcm but n exc 25 sqcm as in cornices, picture rails and the like fixed with screws complete all as specified and directed.

M& L for complete removal of existing treatment of old wall surfaces and applying avaraging 2mm thick wall care putty over prepared plastered surface to receive the surface even and smooth and applying two coats of plastic emulsion paint of approved manufacturer of required shade and colour complete over a coat of wall primer as per manufacturer's specification complete all as specified and directed.

M&L for double charged vitrified coloured tiles light shade 10 mm thick (square/ rectangular) polished, area of each tile exceeding 0.36 sqm but not exceeding 1.00 sqm in floors etc, set and jointed in neat cement slurry and pointed with colour cement, laid over and including 15mm thick bedding layer in cement mortar 1:6 complete all as specified and directed.

Ditto all as per item No 13 above but in skirting / vertical surface etc complete all as specified and directed.

M&L for Non - skid/Matt finish Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.16 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles in verticle surfaces of pattern approved by GE with highlighter of size of size 600x1200x10mm thick set,pore, gap filled with in neat cement slurry and pointed in white or colour cement to match including 10mm thick plaster in CM 1:4 as a backing coat complete all as specified and directed.

M&L 20mm(+ -2mm) thick Granite (of jet black ) work (table rubbed and polished ) in steps ,jambs ,pillars,window cills, cooking plateforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. Exposed edges to make half round.

M&L for Digital Durastone tiles designed to provide a high level of durability, strength, and longevity. made from a blend of natural materials and advanced technology including matt, polished, and glossy finishes with size 600mm x 600mm x 10mm thick, set, jointed and pointed in neat cemeant slurry in floors with grey cement and pigment in floor over 20mm screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Wallpaper is a decorative coating that is used for interior wall surfaces in spaces with various uses and has an aesthetic aspect in interior design. This type of wallpaper cover is mostly installed on the wall with the self-adhesive etc complete all as specified and directed.

Taking down 15 mm bore mild steel tubing of medium grade and connections incl cleaning for refixing or removal from site complete all as specified and directed.

Ditto all as per Item No 20 above but for 20 mm bore

S&F 15 mm bore mild steel water tubing medium grade galvanized with all fittings and fixture fixed to walls ceiling or laid in floors complete all as specified and directed.

Ditto all as per item No 22 above but for 20 mm bore

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth etc complete all as specified and directed.

S&F Vitreous china White Round basin with single faucet hole in white excluding taps waste chain and porcelain stopper but incl brackets cutting for pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe fixed complete all as specified and directed. Make : Cat Part No-S2020102RG of CERA or equivalent in makes as mentioned at makes list in PS

Supply and fixing in repairs Single-control basin faucet 300mm extended body with suitable connecting pipe 15mm dia screwed down, screwed for iron pipe and fixed complete all as specified and directed. Make Cat Part No-F1012452RG of CERA or equivalent in makes as mentioned at makes list in PS

S&F Bottle trap in polished chrome(Generic) type for WHB including inlet, outlet and union cap etc. 32mm bore complete all as specified and directed.

S&F in repairs Glass shelf assembly in polished chrome etc complete all as specified and directed. Make : Cat Part No-F5012116RG of CERA or equivalent in makes as mentioned at makes list in PS

Supply and fixing in repairs toilet paper holder chrome with cover in french gold fixed in position complete all as specified and directed. Make : Cat Part No F5012109FG of CERA or equivalent in makes as mentioned at makes list in PS

S & F in repair 600mm towel racks with lower hanger complete all as specified and directed. Make : Cat Part No F5011101RG of CERA or equivalent in makes as mentioned at makes list in PS

S & F 15 in repairs mm bore bib cock with wall flange and aerator for iron pipe complete all as specified and directed. Make : Cat Part No-F1016151RG of CERA or equivalent in makes as mentioned at makes list in PS

S&F in repairs 15 mm stop cock suitable for 15mm pipelinewith inner head etc complete all as specified and directed. Make: CAT Part No-F1016151RG of Cera or equivalent in makes as mentioned at makes list in PS

S&F in repair Dribble-Two function health faucet and wall hook complete all as specified and directed Make: CAT Part No-F8035101RG of Make Cera or equivalent in makes as mentioned at makes list in PS

S&F in repair vitreous china wash down water closet pan Carnival Rimlessl Wall Mounted White coloured EWC, with dimension 510 x 365 x 380 mm complete all as specified and directed. Make : CAT Part No.S1043144 of CERA or equivalent in makes as mentioned at makes list in PS

S&F in repair Towel Ring complete all as specified and directed Make: CAT Part No.F5013105RG of CERA or equivalent in makes as mentioned at makes list in PS

M&L for preparing old surface with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying One coat of water based premium acrylic smooth exterior quality emulsion paint on old wall surfaces of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fangal properties in one coat @ 0.75 ltr (undiluted) / 10 sqm diluted with water as per manufacturer instructions applied over preparing surfaces with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI etc complete all as specified and directed.

S&F in repairs 15mm angle cock,with wall flange for iron pipe or for unions and fixed complete all as specified and directed Make: CAT Part No.F1016201RG of CERA or equivalent in makes as mentioned at makes list in PS

S&F in repairs liquid soap dispenser complete all as specified and directed Make: CAT Part No.F5013111RG of CERA or equivalent in makes as mentioned at makes list in PS

S&F SENSOR based Vitreous China Urinal With Sensor With Fixing Accessories, Size: 480x300x740 mm complete all as specified and directed. Make - JaquarCat Part No :URS-WHT-1325Sor equivalent in makes as mentioned at makes list in PS

S & F in repair vitreous china Urinal bowl flat back half stall type white excluding flushing cistern white with grating and union for discharge pipe etc complete all as specified and directed.

S&F in reapir Urinal spreader for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F in repair PVC connections 15mm size with brass nuts of length 600mm etc complete all as specified and directed.

S& F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain Panelled door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F anodised powder coated ventiator with louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips with rubber beading and glazing clips etc using aluminium sections weighing not less than 0.55 Kg/M complete all as specified and directed.

S&F 100mm, Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed complete all as specified and directed.

S&F 150 mm Brass Brass handles classic style and 10-12 mm square shape , cast type, polished bright handles, fabricated type complete all as specified and directed.

S & F Brass barrel tower bolt with 12 mm bore, with cast or sheet barrel and rolled or cast bolts and fixed 150mm long complete all as specified and directed.

Supply & fixing Brass sliding door bolt with 20 mm bore with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed of 250mm long complete all as specified and directed.

S&F Aluminium Composit Panel (ACP) sheet with 1"x1.5" aluminium tube over the plain or semi circuler framed trusses / beam of gates including flat or sloped with circular or notching and waste on ACP cutting ,ACP shall meet undermentioned tech requirements. (i) Coating on front : high quality polymer resin. (ii) Core : FR Core (Fire retardant) (iii) Thickness : 4mm (iv) Weight : 7.50Kg/Sqm (v) Width: 1205mm (vi) Length: 2400 to 4880mm (vii) Structure: aluminium panel are protective film,clear coating PVDF, primer coating,antirust layer,aluminium skin and polyethylene. (v) Temp Resistance : Between -50C to +80C Note : Rate is deemded to be inclusive of scaffolding required and joint sealing

M&L moduler glass partitaion including 12 mm thk seamless frosted glass fixing at powder coated aluminium corner and S S-304 brackets ,seal by silicon sealent complete all as specified and directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Demolition and breaking of drain pipes AC/CI/PVC set in cement mortar or adhensive all as directed of 75 mm to 110 mm dia complete all as specified and directed.

S&F for 110 mm dia PVC SWR pipes single socketed in any length with rubber ring joints fixed to floor including clamp etc complete all as specified and directed.

S&F for 75 mm dia SWR pipes single socketed in any length with rubber ring joints fixed to floor including clamp etc complete all as specified and directed.

S&F PVC (SWR) single T 75 mm dia access door complete all as specified and directed.

S&F PVC (SWR) bend 75 mm dia complete all as specified and directed.

S&F PVC (SWR) bend 110mm dia complete all as specified and directed.

S&F PVC (SWR) 75 mm dia vent cowl complete all as specified and directed.

S&F PVC (SWR) 110 mm dia vent cowl complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap with steel grating 75 mm dia including jointing to waste pipe including removing old traps complete all as specified and directed.

S&F factory made 18 mm (+0.7 mm) thick celuka PVC ply of density 600 kg/cbm manufactured by an ISO 900-2008 certified company. One side prelame and other side plain 18 mm thick celuka PVC Ply for kitchen cabinet shutter and also manufacturers test report and test certificate is mandatory with each and every supply of material, complete all as specified and directed and as manufacturer specifiecation and drawing.

S&F factory made 18 mm (+0.7 mm ) thick celuka PVC ply of density 600 kg/cbm manufactured by an ISO 900-2008 certified company . plain 18 mm thick celuka PVC Ply for shelves/partions/drawers and also manufacturers test report and test certificate is mandatory with each and every supply of material, ccomplete all as specified and directed and as manufacturer specifiecation and drawing .

S&F 100 mm size Stainless Steel handle complete all as specified and directed.

S&F 50 mm Magnaetic catches with brass body and striking plate including letting in as fixed , complete all as specified and directed.

S&F 50 mm size stainless steel piano hinges , complete all as specified and directed.

S&F 40 mm stainless steel Nobs complete all as specified and directed.

S&F stailess steel telescope channel of size 500mm complete all as specified and directed.

S&F stainless steel thali basket fo size 550 x 600x 200mm Grade -304 complete all as specified and directed.

S&F stainless steel basket fo size 550 x 600x 200mm Grade -304 complete all as specified and directed.

M&L precast cement concrete (1:3:6) type C-1 (Using 20mm graded stone aggregate) block masonry with solid blocks exc10 cm thick in width and setting in cement mortar (1:6) complete in wall complete all as specified and directed.

M&L for 15 mm thick cement plaster on brick or concrete surface in cement mortar (1:6) included finishing surface even and smooth without using extra cement on walls etc complete all as specified and directed.

M&L for 15 mm thick cement plaster on brick or concrete surface in cement mortar (1:4) included finishing surface even and smooth without using extra cement on walls etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of alkali registant priming paint etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint white or tinted including scaffolding arrangement, trestles, ladders etc complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including cleaning off premises where complete all as specified and directed.

M&L for cement concrete (1:3:6) type C2 using 20mm graded stone aggregate in plinth protection, 75 mm thick, finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen85/25 and sand in the proportion of (1:3 ) by weight complete all as specified and directed.

M&L for machine cut superior quality Kota stone slab flooring 20-25 mm thick over cement screed , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete match including bulnosed to edges complete and incl 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed

S&F in repairs, wash hand basins vitreous china flat back 450mmx300mm size white, first quality, with and including chromium plated waste grating 32mm size, PVC waste pipe 25mm bore heavy duty China and plug and porcelain stopper, brackets of Mild Steel angle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer over angle iron brackets complete to walls complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed , screwed for iron pipe of bore 15 mm fixed complete all as specified and directed..

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs for PVC flushing cistern valve less, syphonic action type low level, ball valve, float and handle with bracket fixed in repair of 10 ltrs capacity all as specified and directed including taking down old one complete all as specified and directed.

S&F in repair Water closet (Squatt pattern) vitreous China squatting pan, ‘Orissa’ pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) connection to trap and squatting pan including P' trap set in and including concrete etc.complete all as specified and directed including making good to floor

S&F in repairs Bib taps 15mm dia, chromium plated ,fancy type ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including taking down old one complete all as specified and directed.

S&F in repairs Stop valves 15mm dia, chromium plated ,fancy type, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed including dismantling of old one complete all as specified and directed

M&L for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but n exc 0.18 Sqm (400x400x7 to 8 mm thick) as in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid over & including 15 mm thick screed bed cement mortar (1:6) complete all as specified and directed.

M&L for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but n exc 0.18 Sq (400x400x7 to 8 mm thick) as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid over 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for coloured Glazed ceramic tiles as in vertical surface of Size 350x 250 x7mm /450x350x7 mm set and jointed in neat cement slurry laid over 10 mm thick cement rendering in cement mortar 1:4. and pointed in white or colour cement to match the tile complete all as specified and directed.

Repair / maintenance of internal light fitting of any type like tube lights / wall bracket light fittings / ceiling lights / bulk head light / mirror lights etc in its position, testing all the compenents / parts, wiring etc, identifying and replacing the defective components like tube rod, side holders, holders, lamps etc complete all as specified and directed. Note: (i) The rate against the above mentioned item is deemed for cost of labour only. (ii) Cost of spares like capacitor, lamp holder, connector, connection wire etc. replaced against above mentioned item will be measured & paid for separately under respective items of Sch 'A' here-in-below. (iii) The contractor's representative will report to concerned JE E/M at 0900hrs daily to collect the list of defects and will submit the completion report on following day before 0900hrs to the JE E/M. (iv) The contractor shall rectify the defects and make the light fittings functional within 24 hours from the time the list of defective lights is handed over to him / his rep by the concerned JE E/M. In case the light fitting is not made functional for whatsoever reason within the specified time limit, an amount of Rs 100/- per such defective light fitting per day will be recovered from the amount due to him through RAR / Final Bill.The contractor shall engage separate team of technicians / repairer for each at Offr Md accn & Appointment houses/Guest houses. (v) The contractor shall maintain proper record of repair / maint in a binded compliant register and complaint slip books duly signed by the user and bringing out the details of spares replaced and get it authenticated from concerned JE E/M on daily basis. The contractor shall put up the maint record register to Engineer-in-charge for inspection every Monday or as and when asked for. (vi) The contractor shall maintain sufficient stock of spares / material required for repair / maint of light fittings with the concerned JE E/M against the supply only items here-in-below.

Supply only following spares for light fittings of branded make as mentioned in the list of make enclosed with Particular specifications for replacement :- Spring loaded G13 side holders (set of 2) suitable for 36/40W FTL fitting

Ditto all as per item no.91 above but PVC / polycarbonate lamp holders batten/Angle type

S&F in replacement modular step type fan regulator 120W, 2 module complete all as specified and directed.

S&F in replacement modular switch piano type 10 amps one way one module complete all as specified and directed.

S&F in replacement modular switch piano type 20 amps one way one module with neon indicator complete all as specified and directed. Make - Vinay/ Anchor/Roma

S&F in replacement modular Socket, 6A - 2/3 pin 2 module complete all as specified and directed.

S&F in replacement modular Socket, 6/16A - 2/3 pin 2 module complete all as specified and directed.

S&F in replacement of 1 module Blanking plates complete all as specified and directed.

S&F in replacement modular Bell push, 10 Amp with neon indicator one module complete all as specified and directed.

S&F in replacement modular switch piano type 10 amps Two way one module complete all as specified and directed.

S & F in replacement of switch piano flush type 5 Amps SP one way complete all as specified and directed.

S & F in replacement of switch piano type 15 Amps SP one way complete all as specified and directed.

S&F in replacement of switch socket combination 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and directed.

S&F in replacement of switch socket combination 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified and directed.

S&F in replacement of socket 5/6 Amps flush mounted 3 pin complete all as specified and directed.

S&F in replacement of socket 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified and directed.

S&F in replacement for ceiling rose, 2 to 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and directed.

M&L in replacment of fan regulator electronic step type suitable for 1200/1400 mm sweep fan as per the sample provided by the Engr-in-charge.

M&L in replacement of door bell AC 230 volts single phase ding dong type complete all as specified and directed.

M&L in replacement bell push, flush type 5 Amps complete all as specified and directed.

S&F RJ-11 telephone socket with transparent shutter 1 module alongwith flush metal box 2 module and front cover plate 2 module complete all as specified and directed. Make: HavellsRoma/Vinay/Crabtree Cat Part no - ACWKRXW112

S&F for TV socket with transparent shutter 1 module alongwith flush metal box 1 module and front cover plate 1 module complete all as specified and directed. Make: HavellsRoma/Vinay/Crabtree Cat Part No- ACWKTOG001

S&F ModularType C 2.1 A USB Charger complete all as specified and directed. Make: HavellsRoma/Vinay/Crabtree Cat Part No - ACWKRXG002

S&F in replacement of switch socket combination with box 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and directed.

S&F in replacement of switch socket combination with box 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified and directed.

S& F PVC unbreakable surface boxes of size 4x4 complete all as specified and directed.

S& F PVC unbreakable surface boxes of size 6x6. complete all as specified and directed.

S& F PVC unbreakable surface boxes of size 4x7 complete all as specified and directed.

S& F PVC unbreakable surface boxes of size 6x8 complete all as specified and directed.

S& F PVC unbreakable surface boxes of size 8x10 complete all as specified and directed.

S&F in replacement for white cover plate with frame 1 or 2 module complete all as specified and directed.

S&F in replacement for white cover plate with frame 3 module complete all as specified and directed.

S&F in replacement for white cover plate with frame 4 module complete all as specified and directed.

S&F in replacement for white cover plate with frame 6 module complete all as specified and directed.

S&F in replacement for white cover plate with frame 8 module complete all as specified and directed.

S&F in replacement for white cover plate with frame 12 module complete all as specified and directed.

S&F in replacement PVC unbreakable surface boxes suitable for modular switches 1 or 2 module complete all as specified and directed.

S&F in replacement PVC unbreakable surface boxes suitable for modular switches 3 module complete all as specified and directed.

S&F in replacement PVC unbreakable surface boxes suitable for modular switches 4 module complete all as specified and directed.

S&F in replacement PVC unbreakable surface boxes suitable for modular switches 6 module complete all as specified and directed.

S&F in replacement PVC unbreakable surface boxes suitable for modular switches 8 module complete all as specified and directed.

S&F in replacement PVC unbreakable surface boxes suitable for modular switches 12 module complete all as specified and directed.

Supply and lay Telephone cables for indoor applications up to 10 pair pvc insulated copper conductor wire including heavy duty non metalic PVC conduit, ISI marked, not less than 20 mm dia of thickness 1.8 mm concealed in wall, roof, etc, with all connected fittings from tag block to telephone outlet complete as required at site including making good surfaces and matching with the existing surface complete all as specified and directed.

Supply and drawing including termination of RG-11 cable for TV including heavy duty non metalic PVC conduit, ISI marked, not less than 20 mm dia of thickness 1.8 mm concealed in wall, roof, etc, with all connected fittings complete as required at site including making good surfaces and matching with the existing surface complete all as specified and directed. Make-Havells WHOJTTKARG11 or equivalent in makes as mentioned at makes list in PS

Taking down carefully copper/aluminium point wiring (light/fan/socket) including all accessories wire, casing caping/conduit, screws etc and making good the disturbed surfaces complete all as specified and directed.

M&L point wiring with 1.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metalic rigid PVC casing capping double lock type/PVC conduit ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type switches, sockets, fan regulator etc for following :- One light/Fan point controlled by one way switch 6 Amps 240 volts

Ditto all as per item no 136 above but One 3 pin 6 Amps socket out let point on independent board.

Ditto all as per item no 136 above but One 3 pin 6 Amps socket out let point on same board.

Ditto all as per item no 136 above but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq mm size.

Ditto all as per item no 136 above but One light point controlled by Two 2-way switches

M&L point wiring with 2.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unseathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box , modular cover plate with frame suitable for 15 Amps socket and switch outlet power point independent circuit complete all as specified and directed.

M&L for secruing loose wiring and repair to point wiring with necessary rigid non metalic PVC casing caping double lock type/ PVC conduit ISI marked of size not less than 25 mm inclusive all accessories complete all as specified and directed.

S&F flexible conduit pipe ivory grey in colour of dia not less than 25 mm complete all as specified and directed. Make: As per sample approved by Engr-in-charge

Taking down carefully sub main wiring of any type and size and making good disturbed surfaces complete all as specified and directed.

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 1.5 Sqmm , 1100 Volts grade in and including PVC Conduit/casing caping medium grade not less than 25 mm complete with conduit accessories and copper cable 1.5 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 1.5 Sqmm cable with 01 run of 1.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 2.5 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with conduit accessories and copper cable 2.5 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 2.5 Sqmm cable with 01 run of 2.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with conduit accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 04 Sqmm cable with 01 run of 4 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 6 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with accessories and copper cable 6 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 06 Sqmm cable with 01 run of 6 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 10 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with accessories and copper cable 10 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 10 Sqmm cable with 01 run of 10 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with Four single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with accessories and two run copper cable 4 sqmm continuous earth wire complete all as specified and directed Note: Four runs of 4 Sqmm cable with two run of 4 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with Four single core PVC insulated FRLS cables with stranded copper conductors 6 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with accessories and two run copper cable 6 sqmm continuous earth wire complete all as specified and directed Note: Four runs of 6 Sqmm cable with 02 run of 6 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

S&F 1100 volts grade heavy duty service cable 4 Sqmm two core PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular.

S&F in replacement factory made epoxy powder coated Distribution Board TP & N 4 way double door (VTPN MCCB DB ) MCCB as In comer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes complete all as specified Note: MCBs/ MCCBs will be measured and paid seperately under respective Sch A item in the schedule

S&F in replacement MCB DB 12 way SPN double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete all as specified and directed. Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced.

Dittto all as per item no 154 above but 08 way SPN DB (Double door)

Dittto all as per item no 154 above but 04 way SPN DB (Single door)

Dittto all as per item no 154 above but 04 way SPN DB (Double door)

Dittto all as per item no 154 above but 02 way SPN DB (Single door)

S&F MCCB with rating of 100 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu). MCCB should be with suitable spreaders and phase barriers for each terminals complete all as specified and directed.

S&F MCCB with rating of 63 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu). MCCB should be with suitable spreaders and phase barriers for each terminals complete all as specified and directed.

S&F in replacement of C Curve MCB SP 6-32 Amps working on 240 volts,50 Hz 10 KA complete all as specified and directed.

S&F in replacement of C Curve MCB DP 6-32 Amps working on 240 volts,50 Hz 10 KA complete all as specified and directed.

S&F in replacement of C Curve MCB SPN 40-63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and directed.

S&F in replacement of C Curve MCB TP 40-63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and directed.

Supply and fix in replacement of C Curve MCB TPN 40-63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and directed.

Supply and fixing ceiling fan complete with blades, down rods and other accessories, 230 V, 1200 mm sweep with Minimum air delivery of 210 CMM BEE Five star rated with brushless direct current motor (BLDC), white/Ivory in colour complete all as specified and directed. Note: Old ceiling fan should be deposied in MES store Make:Crompton/Havells/Orient/atomberg

Dismantling and removing rusted louvers (set of 4) suitable for 300 mm sweep exhaust fan supply and fix MS louvers duly painted gray coloured suitable for 300mm heavy duty exhaust fan alongwith four number mounting bracket with bolts, nuts washers etc complete all as specified and directed.

S&F in replacement of GI pipe ceiling fan down rod of 15 mm dia up to 1 mtr long for ceiling fan made out of 15 mm dia GI heavy grade pipe fixed on ceiling using suitable clamp including necessary new nut, bolt and washer complete all as specified and directed.

S&F in replacement sheet metal enclosures Single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 volts complete with all accessaries etc all as directed.

S&F in replacement sheet metal enclosures Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amps, 240 volts complete with all accessaries etc all as directed.

S&F neon lamp indicator square/round type after taking out old incl taking down old one complete all as specified and directed.

S&F in replacement plug top 3 pin, 15/16 amps, 230 volts, ISI marked heavy duty for geyser connection cord complete all as specified and directed.

S&F in replacement plug top 3 pin, 5/6 amps, 230 volts, ISI marked complete all as specified and directed.

S&F in replacement NRV valve of size 15mm dia of Brass complete all as specified and directed.

S&F in replacement PVC insulated cable 2 core stranded copper conductor 0.5 sqmm complete all as specified and directed.

S&F in replacement PVC insulated cable 2 core stranded copper conductor 1 sqmm complete all as specified and directed.

S&F in replacement PVC insulated cable 2 core stranded copper conductor 1.5 sqmm in and including PVC conduit pipe of dia not less than 25 mm complete all as specified and directed.

S&F in replacement PVC insulated round cable 3 core stranded copper conductor 2.5 sqmm as in connection cord of the geyser complete all as specified and directed.

S&F in replacement PVC insulated cable 3 core stranded copper conductor 4 sqmm in and including PVC conduit pipe of dia not less than 25 mm complete all as specified and directed.

S&F for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR PART-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc complete all as specified and directed.

S&F in replacement 3mm thick white coloured hylam sheet (bakelite) for mounting switches complete all as specified and directed.

S&F in replacement of GI pipe bracket of 25 mm dia 1 mtr long bend to shape for street light fitting made out of 25 mm dia GI light grade pipe fixed on building/pole using suitable FI clamp including necessary new nut, bolt and washer complete all as specified and directed.

S&F in replacement LED building security light fiitting 20 W, IP-65 protection made up of die cast alluminium housing with high power LED as lighting source and lens embeded PC cover having TOP opening seperate driver compartment complete all as specified and directed. Make- Luker LSTE-20/ Havells ENDURACITYLITEPLAT PLUSSL20WLED757SASYBOPC / Wipro LR02-331-XXX-57-XX or equivalent in makes as mentioned at makes list in PS

S&F 12 watt,230V surface and wall mounted warm white LED Mirror Light including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete all as specified and directed. Make- Luker LMCL 12 or equivalent in makes as mentioned at makes list in PS

S&F in replacement 1x10 watt,230V surface and wall mounted LED batten light with polycarbonate housing and integrated electronic electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed.

S&F in replacement of 18/20watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete all as specified and directed. Make- Luker LT5M20 / Havells ENDURALINEARNEOBS20WLED865SPCWH / Bajaj BCLAB 20W WH LED P or equivalent in makes as mentioned at makes list in PS

S&F in replacement Decorative wall mounting 1 LT Opal Glass with Chrome Finishing Wall Lamp with G-9 LED 4W x 1 and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed. Make: Jaquar-KWB-CHR-MB12021121A or equivalent in makes as mentioned at makes list in PS

S&F in replacement Decorative wall mounting 2 LT Champagne Opal glass with Chrome finish Wall Lamp with Lamp: E-14 LED 4W x 2 and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed. Make: Jaquar-KCH-CHR-MB150330022A or equivalent in makes as mentioned at makes list in PS

S&F in replacement 1x10 watt, 230V surface mounted LED downlight with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency, including connecting up with twin core twisted flexible copper condctor cable from ceiling rosecomplete all as specified and directed. Make - Luker Cat part no. LBKRDSL10/Havells INTEGRANEOSURFA CEDLS10WLED857S or equivalent in makes as mentioned at makes list in PS

S & F in indoor Profile LED strip of 14.6/15 watts/m linear flex in colour white, with separate electronic drivers of suiatble and IP 65 protection complete ,Single phase, with aluminium profile including mounting on the ceiling as reqd at the site complete all as specified and directed. Make: Jaquar/Philips/Havells Note : Cost of electronic driver will be measured & paid for separately under respective items of Sch 'A'

S & F in outdoor LED strip of 220 V linear flex in colour WW, with fixing tape and end cap of suiatble and IP 68 protection complete ,Single phase, mounting on the ceiling/wall/piller as reqd at the site complete all as specified and directed. Make: Jaquar/Philips/Havells/Luker Note : Cost of electronic driver and aluminium profile will be measured & paid for separately under respective items of Sch 'A'

S & F in aluminium profile with accessories including mounting on the ceiling/wall as reqd at the site ccomplete all as specified and directed.

S & F in connector outdoor LED strip of 220 V mounting on the ceiling/wall/piller as reqd at the site complete all as specified and directed. Make: Jaquar/Philips/Havells

S & F in Electronic driver 2 to 30 Amps for indoor/outdoor LED strip suiatble and IP 68 protection complete ,Single phase, with aluminium profile including mounting on the ceiling as reqd at the site complete all as specified and directed. Make: Luker/Philips/Havells

S&F Electronic driver suitable for 25/30 watts LED building security light fittings as per existing make complete all as specified and directed.

S&F in repalcement recess mounted 2' x 2' LED Panel lights 40 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully complete all as specified and directed. Note: The quoted price shall include the cost of Light and its driver. Make: Luker Cat Part: LPS40/ Havells Pluto or equivalent in makes as mentioned at makes list in PS

S&F in repalcement recess type LED COB/SPOT lights 12 W with ceiling cut out of Ø 92 mm Environmental friendly, energy saving, recess mounted downlighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and directed. Make: Luker cat part no. LCOB12N or equivalent in Havells/Philips

S&F in repalcement wall light 15W LED UP-down Luminaire with wall/Piller surface mounting and Environmental friendly, new generation, energy saving, decorative IP 66 complete all as specified and directed. Make: Havells-CLIOLL15WLED730PSYMTOTUG or equivalent in makes as mentioned at makes list in PS

S&F in repalcement Focus LED light 3 W with wall/Piller surface mounting and Environmental friendly, new generation, energy saving complete all as specified and directed. Make: Luker cat part no. LSP04 BK or equivalent in makes as mentioned at makes list in PS

Supply and fixing Infrared Presence Surface Mount Sensor for light fittings including connecting up with twin core twisted flexible copper cable to switch and fitting complete all as specified and directed. Make - Luker / Havells/Philips

S&F 200 watt integral SMD LED Highbay luminaire with aluminium reflector light fitting incl with inbuilt electronic drivers, necessary hanging arrangements as per site requirement including taking down the existing one complete all as specified and directed. Make Luker Cat part no. LOHY200 /Havells BAYBRITESAUCERHBP200WLED757WBTOLTG or equivalent in makes as mentioned at makes list in PS Note: 1. Ladders /Cranes shall be used and will be provided by contractor for dismantling /fixing of light fittings at roof and cost for the same is deemed to be included.

Disconnecting and taking down existing userviceable geyser of 25/50/100 ltrs capacity of any make/brand, taking it to civil workshop for repairing. Opening the geyser and dismanting all parts and taking out inner tank/container, removing dents making to shape including welding / brazing the leakage portion, filling the portion between inner tank and out casing of geyser with new glass wool heat insulating material . Reassembling and painting the outer casing of geyser with two coats of superior quality synthetic enameled paint and re- fixing to original place complete all as specified and directed.

S&F in replacement thermostat and cutout set electronic type, temperature adjustable from 0-80⁰C suitable for geyser of 25 ltrs capacity complete all as specified and directed.

S&F in replacement thermostat temperature adjustable from 0-80⁰C suitable for geyser of 100 ltrs capacity complete all as specified and directed.

S&F in replacement heating element of capacity 2 KW of any type and shape suitable for Existing 25 ltrs capacity geysers as per sample provided by Engr-in-Charge

S&F in replacement heating element of capacity 3 KW of any type and shape suitable for Existing 100 ltrs capacity geysers as per sample provided by Engr-in-Charge

S&F in replacement flow unit (inner pipe assembly) suitable for geyser of 25 ltrs capacity of any brand/make and for vertical/Horizontal type including rubber ring/gasket complete all as specified and directed.

S&F in replacement metallic flexible hot water connection 600 mm long including necessary washers suitable for geysers of 25 ltr capacity complete all as specified and directed.

AMW Construction and developers