Repair and Maintenance of MCC SHED at Adavanandal Eri Street in Ward No.43 , Zone IV in Vellore City Municipal Corporation.

Dismantling the Existing Plain Cement Concrete works including cost of all labour and material charges etc., complete as per standard specifications W-0034 -PWD SoR 2024-25

Dismantling the Existing Brick Masonry in Cement Mortar under 3 m high including cost of all labour and material charges etc., complete as per standard specifications W-0015 -PWD SoR 2024-25

Removal of Excavated Excess Earth away from the site to 5 KM including loading and transportation charges etc, complete as per standard specification

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Plain Cement Concrete 1:2:4 mix (One Cement ,two sand and four aggregate) using 20mm ISS gauge HBBG metal from the approved quarry including mixing, laying, consolidating, curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Brickwork in CM 1:5 (One Cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" x 43/8"x 2 3/4" including finishing, curing, etc., complete complying with standard specification

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Manufacturing supplying and fixing of MILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers.

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 75 mm thick in RCC M20 concrete using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Supplying and fixing in position Cement based hydrualically pressed Anti-Skid tiles (pattern design) 20mm thick in cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with same colour of cement etc., complete as per standard specification

Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Painting with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) including cost of all material charges and labour charges etc, complete as per standard specification SD 18

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point including cost of all material charges and labour charges etc, complete as per standard specification SD 36

Wiring with 2 x 4.00 sqmm (56/0.3mm) PVC insulated SC unsheathed Cu.Cable conductor cable of 1100V grade insuitable heavy gauge M.S.conduit pipe on wall and ceiling with M.S.accessories with 150mm x 100mm x 75mm MSswitch box for 15A 3 pin non interlocking CS plug with painting of suitable colour,with continuous earthwire connection by 14 SWG TC wire for open power plug point. SD 39

Supply and fixing of single box type 4' x 40 W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting including cost of all material charges and labour charges etc, complete as per standard specification SD 89

Supply and fixing of 1200mm (48") AC Ceiling fan complete with stepped electronic 300W regulator with 1 meter down rod on the existing clamp including cost of all material charges and labour charges etc, complete as per standard specification SD 107

Supply and fixing of 4' x 40W twin street light fluorescent fitting complete with copper choke and condensor with 32mm dia GI pipe (Class 'B') with 1 No. 32mm GI bend complete on the existing post wall with 16A aerial fuse unit on MS plate with PVC unsheathed copper leads MS clamps and aluminium painting with fluorescent tubes SD 95

Supply and fixing of 4 way Single Phase DB of 16 A /way with 16 Amps. DP Switch with metal clad of 500 V (Side Handle) with F & N on suitable angle iron frame work with trunking box, MS cable entry box with PWD earthing including cost of all material charges and labour charges etc, complete as per standard specification SD 145

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains including cost of all material charges and labour charges etc, complete as per standard specification SD 65

Supply,Delivery and fixing of 20mm dia GI Service Pipe including cost of all material charges and labour charges etc., complete as per Specifications (L.R)

Supplying laying and jointing of 25 mm dia P.V.C pipe (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.

32mm dia PVC pipe

25 mm dia PVC pipe

Supplying and fixing in position P.V.C. specials such as plain bend, door bend, plain tee, door tee, offsets,Y-junction, plain or with door of various sizes best quality confirming to I.S.S and providing leakproof joints including fixing to wall and giving connection to the P.V.C, soil stacks, dismadling the brick masonry or R.C.C. floor or Roof slab and redoing the dismandled portion to original condition etc., complete complying with standard specifications.

25 mm dia PVC Elbow

25 mm dia PVC Tee

110mm dia PVC Elbow

110mm dia PVC Tee

20 mm Dia PVC Screw Down Tap Heavy Type

Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications.

110mm dia PVC 6KSC Pipe

Supplying and fixing in position first quality and approved variety of 25mm dia Gun Metal Gate Valve (Heavy type ) with I.S.I. mark of the following sizes including cost of Shellac , thread etc, .including labour for cutting and threading of G.I.Pipes etc. ,complete complying with standard specifications for both internal and external water Supply arrangements.

Supplying laying and jointing of 25 mm dia GI pipe B Class of approved quality and best variety conforming to I.S.S & with I.S.I mark including cost of all material charges and labour charges etc., complete as per Specifications. (M-0437 PWD SoR 2023-24)

Supply and Delivery of Fly Catcher Machine - The Machine must be made in accordance with modern technology to eliminate flies.It must be capable of attracting flies by providing UVa 365mm vave length blue light and the attractes flies must stuck in the consumable glue board kept inside the unit.The specially coated glue board must not only attract trapped flies it must elimnate flies without any noise and smell.The rate includes fixing the machine in position with all cost of material and labour charges etc, complete (L.R)

Supply, Delivery and fixing of 200 Kg capacity bench type Electronic Weighing scale including cost of all materials and labour charges etc, complete (L.R)

Supply, Delivery of Manual Sewer with MS Angle Frame fitted with suitable GI mesh including cost of all materials and labour charges etc, complete (L.R)

Supply, Delivery of Wheel Barrow including cost of all materials and labour charges etc, complete (L.R)

Please Enable Macros to View BoQ information