MISC REPAIRS TO WOODEN FURNITURE INCLUDING CANNING AND REPAIR TO BED PLY TOP, TABLES, STEEL FURNITURE, GI CHARPOY, MISC TP FURNITURE AND PAINTING OF STEEL FURNITURE AND RENEWAL/ REPLACEMENT OF CONDEMNED FURNITURE INCLUDING VARNISHING AND PAINTING AT

Amount

BED PLY TOP (DRG NO. FD-246) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of wooden furniture and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished to finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

4 mm thick plywood of head board teak face veneer (one side)

4 mm thick plywood of foot board teak face veneer (one side)

Long Rail made out of 1st class hard wood

Short Rail made out of 1st class hard wood

Leg made out of 1st class hard wood

12 mm thick plywood of size 1890mm x 900mm bed top BWR commercial

TABLE DINING 06 PERSONS (DRG NO. FD-273) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of wooden furniture and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished to finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

Leg made out of 1st class hard wood all as specified.

Table top of size 1500x900x18mm thick with prelaminated particle board with around 4 mm thick 1st class hard wood edging.

Side rail long of 1st class hard wood

Side rail short of 1st class hard wood

TABLE WRITING (DRG NO. FD-275) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of wooden furniture and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished to finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

Leg made out of 1st class hard wood

Stiffner made out of 1st class hard wood

Door 18mm thick plywood BWR grade with 1 mm thick laminated sheet fixed with adhesive and around 4mm thick 1st class hard wood edging

Drawer as per existing size and shape

Table top 1145x 600x18mm thick prelaminated particle board with 4mm thick around 1st class hard wood edging

Side rail long of 1st class hard wood

Side rail short of 1st class hard wood

PEG TABLE (DRG NO. FD-277) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of wooden furniture and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished to finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

Table Top of size 450x300x18mm thick prelaminated particle board with around 4mm thick 1st class hard wood edging.

Leg made out of 1st class hard wood

Side rail long of 1st class hard wood

Side rail short of 1st class hard wood

TEAPOY (DRG NO. FD-278) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of wooden furniture and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished to finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

Table Top of size 600x450x18mm thick prelaminated particle board with around 4mm thick 1st class hard wood edging.

Leg made out of 1st class Hard wood

Side rail long of 1st class hard wood

Side rail short of 1st class hard wood

BOOK CASE (DRG NO. FD 237) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of wooden furniture and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished to finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

Top of book case of size 1200x300x18mm thick plywood with 1 mm thick laminated sheet fixed with adhesive and around 1st class hard wood edging.

Back of book case by 6mm thick plywood BWR

Door leaf by 18mm thick plywood with 1 mm thick laminated sheet fixed with adhesive and around 4mm thick 1st class hard wood edging.

CHAIR WOODEN BOTTOM (DRG FD-285) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of wooden furniture and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished to finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

Front Leg made out of 1st class hard wood

Rear Leg made out of 1st class hard wood

Stiffner made out of 1st class hard wood

Front/side rail with necessary holes for canning made out of 1st class hard wood

Seat 6mm thick with plywood commercial type

SOFA SET 4/5 SEATER (DRG NO. FD-281) Taking out old unserviceable foam cushion with cover from sofa set 4/5 seater and replacement with new cushion in Sofa of size 530x500mm, 100mm thick, 40mm density and covered with new tepastry cloth superior quality, approved from GE complete all as specified and all as shown on drawing.

CHAIR DINING JCO's/OR's (DRG NO. FD/MAP-II/05) Removing/taking out carefully old unserviceable worn out/broken/damaged parts chair dining and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished to finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

PVC seat with new seat of chair dining

Front Leg made out of 1st class hard wood

Rear Leg made out of 1st class hard wood

Stiffner made out of 1st class hard wood

Front/Side Rail with necessary screws

CHAIR DINING OFFRS (DRG NO. FD/MAP-II/04) Removing/taking out carefully old unserviceable worn out/broken/damaged parts chair dining and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished to finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

S&F cushion and tapestry cloth and as per existing shape and size.

Front Leg made out of 1st class hard wood

Rear Leg made out of 1st class hard wood

Stiffner made out of 1st class hard wood

Front/Side rail made out of 1st class hard wood

TABLE CENTRE (DRG NO. FD 274) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of wooden furniture and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished to finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

Table top of size 900x450x18mm thick prelaminated particle board with around 4mm thick 1st class hard wood edging.

Leg made out of 1st class hard wood

Side rail long of 1st class hard wood

Side rail short of 1st class hard wood

TABLE DINING 04 PERS (DRG NO. FD/E6/MAP-II/03) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of wooden furniture and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished to finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

Leg made out of 1st class hard wood

Table top 1200x900x18mm thick prelaminated particle board with around 4mm thick 1st class hard wood edging

Side rail long of 1st class hard wood

Side rail short of 1st class hard wood

CHAIR WRITING (DRG NO. FD-280) Removing/taking out carefully old unserviceable worn out/broken/damaged parts chair dining and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished to finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

Front Leg made out of 1st class hard wood

Rear Leg made out of 1st class hard wood

Stiffner made out of 1st class HW all as specified.

Front/side rail with necessary holes for canning made out of 1st class hard wood

Arm rest made out of 1st class hard wood

CHAIR EASY (DRG NO. FD-229) Removing/taking out carefully old unserviceable worn out/broken/damaged parts chair dining and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished to finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

Front Leg made out of 1st class hard wood

Rear Leg made out of 1st class hard wood

Front/side rail with necessary holes for canning made out of 1st class hard wood

TABLE BED SIDE (FD-276) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of wooden furniture and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished to finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

Side of table bed side shall be of 18mm thick pre-laminated particle board having teak veneer face on one side and commercial on other side.

Top shall be of 18 mm thick particle board having teak veneer face on top.

6mm thick commercial plywood shall be fixed on back of Table Bed side.

12 mm thick shelf shall be provided

Re-canning with new Plastic Cane 2mm wide Oval type in white colour and border with 4mm wide

POLISHING Removing of old fade out polished by polish remover/scrapper or by caustic soda or by any other means without damaging surfaces of furniture as listed below, making the surface smooth and free from dust and applying high class french spray polish till glossy/shine finish obtained complete all as specified and directed.

Side Board (Drg No. FD-26M)

Chair W/B without arm. (Drg No. FD-285)

Peg Table (Drg No. FD 277)

Sofa set 05 Seater (Drg No. FD-281)

Stool Dressing (Drg No. FD-282)

Teapoy (Drg No. FD-278)

Table Centre (Drg No. FD-274)

Table writing (Drg No. FD-275)

Chair Dining JCO/ORs (Drg No. FD/MAP-II/05)

Table of size 900x600x760 mm without drawer (Drg No. FD/42M)

Chair Dining Officers (Drg No. FD/MAP-II/04)

Table Bed Side (Drg No. FD 276)

Table Dining 06 Pers (Drg No. FD-273)

Table Dining 04 Pers (Drg No. FD/E6/MAP-II/03)

Book Case (Drg No. FD-237)

Sofa set 04 Seater (Drg No. FD-281)

Chair writing (Drg No. FD-280)

ALMIRAH LARGE STEEL (DRG NO. FD-1031) :-

S&F Leg of Almirah large steel made out of 1mm thick mild steel sheet as shown on drawing and apply two coats of synthetic enamelpaint over a coat of red oxide primer with a spray painting compressor, including removing of unserviceable leg complete all as shown in drawing and as directed.

All as per Serial item No. 18.01 here-in-before but shelves of almirah large steel

All as per Serial item No. 18.01 here-in-before but door of almirah large steel

S&F Locking Device including locking rods for Almirah large steel including removing of un servicable locking device.

S&F Handle 150mm long, chromium plated for Almirah large steel including removing of un servicable handle complete as shown in drawing and as directed.

S&F Lock universal type 6 lever made out of mild steel ,powder coated for Almirah large steel including removing of un servicable lock complete as shown in drawing and as directed.

S&F of butt hinges of existing Almirah Large Steel complete all as shown in drawing and as directed.

ALMIRAH MEDIUM STEEL (DRG NO. FD-1032) :-

S&F Leg of Almirah medium steel made out of 1mm thick mild steel sheet as shown on drawing and apply two coats of synthetic enamelpaint over a coat of red oxide primer with a spray painting compressor, including removing of unserviceable leg complete all as shown in drawing and as directed.

All as per Serial item No. 19.01 here-in-before but Shelves for Almirah medium steel

All as per Serial item No. 19.01 here-in-before but door for Almirah medium steel

S&F Locking Device including locking rods for Almirah medium steel including removing of un servicable locking device.

S&F Handle 150mm long, chromium plated for Almirah medium steel including removing of un servicable handle complete as shown in drawing and as directed.

S&F Lock universal type 6 lever made out of mild steel, powder coated for Almirahmedium steel including removing of un servicable lock complete as shown in drawing and as directed.

S&F of butt hinges of existing Almirah Medium Steel complete all as shown in drawing and as directed.

LOCKER BED SIDE STEEL (DRG NO. FD- 1029):-

S&F Leg of Locker Bed Side steel made out of 1mm thick mild steel sheet as shown on drawing and apply two coats of synthetic enamelpaint over a coat of red oxide primer with a spray painting compressor, including removing of unserviceable leg complete all as shown in drawing and as directed

All as per Serial item No. 20.01 here-in-before but shelves of locker bed side steel

All as per Serial item No. 20.01 here-in-before but door of locker bed side steel

S&F mild steel Handle 100mm long, chromium plated for locker bed side steel including removing of unserviceable handle complete as shown in drawing and as directed.

S&F hasp and staple of size 75mm long mild steel chromium plated for locker bed side steel including removing of unserviceable hasp and staple complete as shown in the drawing and as directed.

S&F of butt hinges of existing Locker Bed side steel complete all as shown in drawing and as directed.

TABLE CLERKS STEEL (DRG NO. FD-1004) :-

S&F Drawer made out of 1mm thick mild steel sheet with all the necessery cutting ,moulding ,make hole welding etc, and apply two coat of synthetic enamel over a coat of red oxide primer with spray painting compressure including removing unserveciable drawer, complete as shown on drawing and as directed.

S&F lock 3 way, 6 lever for table clerk steel including removing unserviceable drawer lock complete as shown on drawing and as directed by Engineer-in-charge.

S&F PVC recess handle including fixing with self tapping screw, including removing unservicable handle,complete as shown in drawing and as directed.

S&F hard rubber shoe including removing unservicable rubber shoe complete as shown in drawing and as directed.

S&F in repair Top of Table clerks steel 18mm thick pre-laminated particle board with 4mm thick around 1st class HW edging all as specified as shown in drawing and as directed.

TABLE OFFICERS STEEL (DRG NO. FD-1003):-

S&F Drawer made out of 1mm thick mild steel sheet with all the necessery cutting ,moulding ,make hole welding etc, and apply two coat of synthetic enamel over a coat of red oxide primer with spray painting compressure including removing unserveciable drawer, complete as shown on drawing and as directed.

S&F lock 3 way, 6 lever for table clerk steel including removing unserviceable drawer lock complete all as specified and shown in drawing and as directed.

S&F PVC recess handle of best quality including fixing with self tapping screw as shown in drawing , including removing unservicable handle,complete all as specified and shown in drawing and as directed.

S&F Hard Rubber shoe 25mmx25mm of best quality including removing unservicable rubber shoe complete all as specified and shown in drawing and as directed.

S&F as in repairs Top of Table officer steel 18 mm thick pre-laminated particle board with 4 mm thick around 1st class HW edging complete all as specified and shown in drawing and as directed.

CHAIR CB STEEL WITHOUT ARM (DRG NO. FD-75(M):-

S&F of Seat for Chair CB without arm made out of 1st class hard wood ,all as shown in the drawing, including weaving plastic cane of 2 mm wide boarder with 3mm wide ,half round type white Godrej pattern, fitting self on frame with slef tapping screw neatly. All the wooden exposed parts shall be french polished up to glossy finish or paint enamel black colour complete all as specified and shown in drawing and as directed.

All as per Serial item No 23.01 here-in-before but back for chair CB without arm Steel

CHAIR CB STEEL WITH ARM {DRG NO. FD-75(M)} :-

All as per Serial item No. 23.01 here-in-before but seat of chair CB with arm

All as per Serial item No. 23.01 here-in-before but back for chair CB with arm.

S&F Handle for chair CB steel with arm made out of 1st class hardwood and apply french polish of black paint upto glossy finish complete all as specified and shown in drawing and as directed.

CHAIR COMPUTER (TRADE PATTERN, TP) :

S&F PVC handles of chair Computer TP of existing shape and size with all necessary workmanship like mildsteel bracket, cutting, making hole welding as per existing chair computer, including removing of unservicable handle all as shown and specified on drg and as directed. Make : OEM, Godrej, Decowell

S&F PVC pedestal without castors (wheel)of chair computer TP of existing shape and size with all the necessary workmanship,as per existing chair computer, including removing of unservicable PVC Pedestal all as shown shown and specified on drg and as directed. Make : OEM, Godrej, Decowell

S&F of Castor (Wheels) for chair computer TP of existing shape and size (threaded type or shank Type) with all the necessary workmanship ,as per existing chair computer TP,including removing unservicable castors (wheel) from padestal of chair computer complete all as shown and specified on drg and as directed.

S&F of Hydraulic Piston (For hight adjustment) for Chair computer TP of existing shape and size with all the necessary workmanship ,as per existing chair computer TP, including removing unservicable Hydraulic piston from chair computer complete all as shown and specified on drg and as directed. Make : OEM, Godrej, Decowell

S&F of Bracket with Tilt mechanism for Chair computer TP of existing shape and size with all the necessary workmanship ,as per existing chair computer TP, including removing unserviceable Bracket with Tilt mechanism from chair computer complete all as shown and specified on drg and as directed.

CHAIR VISITOR (TRADE PATTERN, TP) :-

S&F PVC handles of chair Visitor TP of existing shape and size with all necessary workmanship like mildsteel bracket, cutting, making hole welding as per existing chair Visitor including removing of unservicable handle complete all as shown and as specified on drg and as directed. Make : OEM, Godrej, Decowell

S&F of Seat and back shall be 12mmthick hot pressed plywood. Upholstered with with fabric and moulded polyurethane foam, The back form shall be designed with contour lumber support for extra comfort with PVC lapping all around & complete all as specified and shown on drawing and as directed.

GI CHARPOY (DRG NO. FD-220):-

S&F GI Charpoy Long Rail of GI Pipe 32mm Bore (dia) Medium Grade duly Threaded Both Ends upto the required Length and fitted to frame of Charpoy including taking out unserviceable long rail from 3-way elbow by unscrewing complete all as specified and shown on drawing and as directed.

Cutting long rail (retrieved from Serial Item No. 27.01 here-in-before) to make short rail and threading both ends upto the required length including starightening where required and fixing including taking out unserviceable short rail by unscrewing from three way elbow complete all as specified and shown on drawing and as directed.

Cutting short rail (retrieved from Serial Item No. 27.02 here-in-before) to make legs and threading one ends including starightening where required and fixing including providing 2 Nos mild steel flat iron 20 x 3 mm clamps and providing mild steel flat iron or washer to bottom of mild steel clamps, weled to leg and treated with one coats of black paint over a coat of red oxide zinc chrome primer including taking out unserviceable leg by unscrewing from three way elbow complete all as specified and shown in drawing and as directed.

S&F GI ELBOW 3-WAY, ISI Marked suitable for GI Pipe 32mm Bore (dia) of GI CHARPOY including Taking out unserviceable GI ELBOW from the Frame complete all as specified and shown in drawing and as directed.

S&F GI CHECK NUT, ISI Marked suitable for GI Pipe 32mm Bore (dia) of GI CHARPOY including Taking out unserviceable GI Elbow from the Frame complete all as specified and shown in drawing and as directed.

S&F MS Flat 6 mm thick to charpoy GI Pipe with Nut and washer complete all as specified and shown in drawing and as directed.

S&F in repair ply wood for charpoy GI Pipe with 8 numbers of screw 65 mm with Nut and Washer complete all as specified and shown in drawing and as directed.

CHAIR EXECUTIVE REVOLVING LONG BACK (TRADE PATTERN, TP):-

S&F PVC pedestal with castors (wheel) of chair executive revolving long back complete all as specified and shown in drawing and as directed.

S&F of hydrolic piston (for height adjustment) of chair executive revolving long back complete all as specified and shown in drawing and as directed.

S&F of castor wheel of chair executive revolving long back complete all as specified and shown in drawing and as directed.

Remove the old US tapastry cloth and S&F with new superior quality tapestry cloth for seat and back of chair executive revolving long back duly stritched as per existing shape complete all as specified and shown in drawing and as directed.

S&F PVC Handles of chair executive revolving long back of existing shape and size including removing of unserviceable handle complete all as specified and shown in drawing and as directed.

TABLE OF SIZE 900x600x760MM WITH DRAWER STEEL (DRG NO. FD-1008):-

Removing u/s Top of existing Table 900x600x760mm and S&F with new one complete all as specified and shown on drg and as directed.

ALMIRAH LARGE GLAZED STEEL {DRG NO. FD-104 (M)} :-

Removing unserviceable Door Glass and S&F with new one complete all as specified and shown on drawing and as directed.

Removing unserviceable Locking Device and S&F with new one complete all as specified and shown on drawing and as directed.

Removing unserviceable Handle and S&F with new one complete all as specified shown on drawing and as directed.

ALMIRAH MEDIUM GLAZED STEEL {DRG NO. FD-104 (M)}:-

Removing unserviceable Door Glass and S&F with new one complete all as specified and as shown on drawing and as directed.

Removing unserviceable Locking Device and S&F with new one complete all as specified and as shown on drawing and as directed.

Removing unserviceable Handle and S&F with new one complete all as specified and as shown on drawing and as directed.

TEAPOY VERANDAH

Table Top of size 600 x 450 x 18mm thick prelaminated particle board with around 4mm thick second class hard wood edging complete all as specified and as shown on drawing and as directed.

Welding point not less than 25mm x 5mm of existing steel furniture as required and as directed.

PAINTING OF STEEL FURNITURES:- M&L preparing externel and internal surface of following steel furniture insluding de-rusting/scratching, paste putty, sanding etc and applying two coat of synthetic anamel paint over a coat of red oxide primer before applying paint, with spray paint 1st quality (existing colour/required colour) compressor complete all as specified and shown on drawing or as direcetd.

Almirah Large steel

Almirah Medium steel

Book case steel

Locker bed side steel

Rack steel enclosed back of size 1905x910x455mm

Rack Six tier Steel

Rack adjustable six tier 1905x915x305mm

Rack pegion hole steel 18 holes 1905x915X540mm

Chair CB steel without Arm

Chair CB steel with Arm

Locker six unit steel

Stool Steel

Table clerk steel

Table Ofice Officer steel

Chair Varandah

Table 3'x 2' with drawer steel

Almirha Large Glazed Steel

Almirah medium glazed steel NOTE:- The contract sum shall be derieved by deducting the amount shown in Schedule of Credit attached to this tender from total amount of Schedule 'A'/BOQ

M/S DHAR AND DHAR

NIHAR ENTERPRISE

M/S SANTOSHI TRADERS

M/S N M TRADERS

AJOY DUTTA CHOWDHURY AND CO

Bidder Name

NIHAR ENTERPRISE

M/S N M TRADERS

AJOY DUTTA CHOWDHURY AND CO

M/S GOSWAMI BROTHERS

M/S DHAR AND DHAR

M/S SANTOSHI TRADERS