Repairs and maintenance of toilet blocks installed under swadesh Darshan scheme

Amount

Civil Electrical Works

Dismantling G.I./P.V.C sheets roofing including ridges, hips valleys and gutters etc. and stacking the material within 50 meters lead.

Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.

Providing and fixing JIELI BRAND or equivalent resin or ASA coated 2.5mm UPVC roofing sheet of approved brand along with ridges/valleys to required profile having colour terracotta, including accessories such as tapping screws od good quality with anticorrosive properties etc. excluding the cost of purlins rafter and trusses. and including loading, unloading and transportaion upto a lead of 500m etc. all complete or as directed by Engineer inchrage.

Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade

Providing and fixing FRP door shutters of approved make ,shade and pattern of 35 mm thick with seasoned hard wood styles with approved hinges . Top rail, lock rail and bottom rail. FRP laminate shall be made up of unsaturated polyster resin with thickness 1.5 mm. The core of the shutter shall be filled with high density EPS foam. The shutter shall be waterproof as well as mild acid / alkali resistant manufactured using RV - TIFAC technology in line with IS 4020 - 1994 test Standard in an ISO 9001 - 2000 Certified factory.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) 15 mm nominal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) 20 mm nominal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) 20 mm nominal outer dia pipes.25 mm nominal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) 20 mm nominal outer dia pipes.32 mm nominal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) 20 mm nominal outer dia pipes.40 mm nominal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) 20 mm nominal outer dia pipes.50 mm nominal outer dia pipes.

Providing and placing on tarrace roof of floor two 1st floor single piece rotational moulded polythene water storage tank having ISI mark and conforming to IS 12701:1996. complete as required as directed by Engineer Incharge.2000 Ltrs Capacity

Brass ball valve with copper floats High) 25mm

Brass ball valve with copper floats High) 32mm

Brass ball valve with copper floats High) 40mm

Brass ball valve with copper floats High) 50mm

Sewage work for Calangute toilet block

Fabrication and fixing of Aluminium composite panel cladding with thick 4mm/ 0.25mm ACP sheets, aluminium framework, with 50 X 25 X 1.2 mm thick sections. Silicon sealants etc. including accessories complete.

Supply, Installation, Testing and Commisioning of 5w LED Corrosion proof Recessed mounted square / circular 5 W downlighter having pressure die-cast aluminium housing with white front frame with opal translucent cover with provision for spring loaded mounting clips complete with Electronic driver, LED Downlight 5W 90-260V AC 50HZ LUMINOUS FLUX-550 Lm . make.Gaztek or equivalent in bajaj philips and Atlantis as directed by Engineer Incharge complete as required.

Supply, Installation, Testing and Commisioning of 12w LED 90-260V AC 50HZ LUMINOUS FLUX-1250 Lm ` Recessed mounted CORROSION PROOF LED Circ Light Fitting. The round design IP65 housing in spun Aluminium complete with integral LED & Electronic driver .The housing is finished in white powder coating. A High Impact UV resistant clear Polycarbonate diffuser with prismatic finish for glare free distribution of light with maximum light output ratio completely sealed with silicon gasket for IP65 protection. The Polycarbonate diffuser is secured to the housing with corrosion resistant 4 nos SS screws for life time protection. The integral Electronic driver with 6Kv Surge Protection are enclosed in the housing along with symmetrical array LED mounted on 1.6mm round PCB. The housing is supplied with PG 7 cable gland .make.Gaztek or equivalent in bajaj philips and Atlantis as directed by Engineer Incharge complete as required.

Supply and erecting of 9 inch (225 mm sweep) exhaust fan, 1400 rpm, complete with all accessories. (a) Cat A

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required 3 pin 5/6 A socket outlet Cat B

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required 6 pin 15/16 A socket outlet Cat B

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required 6 pin 5/6 A switch Cat B

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required 6 pin 15/16 A switch Cat B

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in the independent surface/ recessed steel conduit of appropriate size as required.(a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in the independent surface/ recessed steel conduit of appropriate size as required.(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)

Supplying and fixing following rating three pole 415 V isolator in the existing MCB DB complete with connections testing and commissioning etc as required40 A, Cat B

Supply of 4 core armoured PVC insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part II) with latest amendments of following size.(4) 4 Core 10sq.mm

Supply of 4 core armoured PVC insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part II) with latest amendments of following size.(5) 4 Core 16 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge, sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed lengthwise on top of cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. In soily strata

Supply installation testing and commisioning of submersible pump open well type of 1HP

Supply installation testing and commisioning of pressure pump

aman associates