Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.5 LAccepted-AOC 20 2169 PALLURTH PO ERNAKULUM KERALA 682006 | ERNAKULAM | KERALA | 682006 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹21.0 L+₹1.3 L (6.75%)Rejected-Finance 18 837 KILIYARAA HOUSE PERUMPADAPPU PALLURUTHY PO KOCHI 682 006 | KOCHI | ERNAKULAM | KERALA | 682006 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹22.3 L+₹2.7 L (13.5%)Rejected-Finance CHENNAI | CHENNAI | TAMIL NADU | 600001 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹24.4 L+₹4.7 L (24.0%)Rejected-Finance | L4 | Rejected-Finance Being L4 |
Tender Value
₹27.6 L
EMD Value
₹55,200
Closing Date
5 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NAVY LAKSHADWEEP
GE (Navy) Lakshadweep Coast Guard Road Kavaratti Islands UT of Lakshadweep-682555
AND PERIODICAL SERVICES UNDER AGE B R II AT MINICOY, GE NAVY LAKSHADWEEP.
2023_MES_627545_1
8376/E8
Open Tender
Civil Works
Item Rate
300 days
GE NAVY LAKSHADWEEP
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE NAVY LAKSHADWEEP
₹55,200
Yes
17 Jan 2024
9 Nov 2023
7 Dec 2023
9 Nov 2023
5 Dec 2023
23 Nov 2023
9 Nov 2023 - 16 Nov 2023
Amount
Cleaning man holes upto 1m depth including pumping out liquid sludge /waste materials taking out solid materials from man holes /chambers burrying the debris obtained from the man hole at a distance exc 100 m and n.exc 200m washing manhole with fresh water including all precautionary and safety measures complete all as specified and as directed by Engineer-in-Charge.
All as per item No 02 but manhole depth exceeding 1.00m not exceding 2m complete all as specified and as directed by Engineer-in-Charge.
Material and labour for removing blockage of WC Indian/Europen type urinal/bath or kitchen traps including cleaning of WC pan/floor traps/Nahani traps and removing blockage of down take pipes up to 1st manholes complete all as specified and as directed by Engineer-in-Charge.
Pumping out complete water ,liquid water and removing /desilting the sludge and cleaning the septic tank complete including plugging the inlet line temporary and diverting the flow into the drain at newly made trench and taking precautionary and safety measures and removing silt to a distance exc 50m but n exc 100 m from the septic tank and burning in pit including provision of pit of required size in any type of soil after spreading line etc for septic tanks of capacity 10 to 25 users complete all as specified and as directed by Engineer-in-Charge.
All as per item No 04 but 25 to 100 users septic tank complete all as specified and as directed by Engineer-in-Charge.
Cleaning and removing all scale and dirt etc from the PVC/RCC water tanks capacity exc 250 ltrs and not exc 500 ltrs on roofs or at any position (and or bringing down if required)by drainig out entire water ,removing sludge ,mud etc brushing /rubbing with wire /nylon brush /mop to remove all algae /fungal growth and moss etc entirely from walls ,floors,ceilings,etc washing cleaning with fresh water by using water jets and then again washing and treating with anti bacterial agents ,disinfectants and bleaching powder and writing in approved font of size 100mm high the 'Date of cleaning'and next due date 'in black synthetic enamel paint over a white base and rubbishing off the premises complete all as specified and as directed by Engineer-in-Charge.
All as per item No 06 but capacity of water tank exceeding 500 litres and n.exc 1000 litres complete all as specified and as directed by Engineer-in-Charge.
All as per item No 06 but capacity of water tank exceeding 1000 litres and n.exc 5000 litres complete all as specified and as directed by Engineer-in-Charge.
Cleaning and removing all scale and dirt etc from the Shallow well not exceeding 3m dia and not exceeding 4 Mtr depth including bailing out water etc complete all as specified and as directed by Engineer-in-Charge.
Cleaning blocked sewage line of 100 mm dia to 200 mm dia bore by rodding from one manhole to next manhole, washing thouroughly with fresh water & removing all sludge at a distance exceeding 100m and not exceeding 200m from the sewage line incuding removing existing manhole covers & refixing properly after cleaning taking all safety precautions complete all as specified and as directed by Engineer-in-Charge.
Supply and fix rotational moulded polythene water storage tanks (Cylindrical vertical with closed top)hoisted fixed in position and connected all as specified capacity of tank 500 litre (ISI marked) including dismantling of tank complete all as specified and as directed by Engineer-in-Charge.
Supply and fix rotational moulded polythene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position and connected all as specified capacity of tank 1000 litres (ISI marked) including dismantling of tank complete all as specified and as directed by Engineer-in-Charge.
Supply and fix ball valves suitable for 25 mm bore iron pipe/CPVC pipe, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and as directed by Engineer-in-Charge.
Supply and fix inrepairss ball valves suitable for 25 mm bore iron pipe /CPVC pipe, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and as directed by Engineer-in-Charge.
Demolition of brick/ stone/PCC block masonry built in cement mortar/cement lime mortar complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Pre -cast cement concrete block masonary with solid blocks made out of PCC 1:3:6 type C-1 (20mm graded aggregate) set in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and as directed by Engineer-in-Charge.
Material and labour for precast reinforced cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in cover slab for man holes/drainage/septic tank cover , set in cement mortar 1:4 incl necessary from work complete all as specified and as directed by Engineer-in-Charge. Note: Reinforocement shall be measured and paid seperately.
Material and labour for TMT bars 6mm to 8mm dia and over cut to length, bent to shape required including cranking, bending hooking ends, and binding spirally for hooping column hooking ends and binding with and including mild steel wire not less than 0.9 mm dia complete all as specified and as directed by Engineer-in-Charge.
Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Rendering 10 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour Rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement including mixing of water proofing compound @ 3% by weight of cement complete all as specified and as directed by Engineer-in-Charge. Note: WPC will be measured and paid seperately as suplly only item
Supply only integral water proofing compound complete all as specified and as directed by Engineer-in-Charge.
Dismatling and taking down old damaged rain water pipes of any size or any description complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 225 mm bore half PVC(SWR) pipes single socketed including supporting MS clamps , any length & position with rubber rings joints, fixed to walls and roof edges of slop roof buildings complete all as specified and as directed by Engineer-in-Charge.
Material and labour for PVC SWR pipes, 110 mm dia bore, single socketed, in any length with using rubber joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge.
Supply and fix PVC SWR pipes, 75 mm dia bore, single socketed, in any length for vent pipes with using rubber joints, fixed to walls complete all as specified and as directed by Engineer-in-Charge.
Supply and fix PVC SWR bend, 75 mm dia bore, with oval access door complete all as specified and as directed by Engineer-in-Charge.
Supply and fix PVC (SWR) bends of 110mm in bore complete all as specified and as directed by Engineer-in-Charge.
Supply and fix PVC SWR pipes, 110 mm dia bore, single socketed, in any length with using rubber joints, fixed to walls complete all as specified and as directed by Engineer-in-Charge.
Supply and fix PVC SWR bend, 110 mm dia bore, with oval access door complete all as specified and as directed by Engineer-in-Charge.
Supply and fix PVC (SWR) T with access door of 110mm dia of bore complete all as specified and as directed by Engineer-in-Charge.
Supply and fix PVC SWR vent cowl, 110 mm dia bore, complete all as specified and as directed by Engineer-in-Charge.
Material and labour for PCC 1:4:8 Type D2 using 40mm graded aggregate, concrete bed to drain pipe 110mm dia bore, including packing under, and haunching against sides of pipes after they are laid and tested in complete all as specified and as directed by Engineer-in-Charge.
DemolItion of cement concrete (unreinforced) of any description and in any position above or below ground level complete and clearing off the permises complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 75mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate finished even and smooth without using extra cement as in plinth protection complete all as specified and as directed by Engineer-in-Charge.
Material and labour for forming 12mm thick expansion joint filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade "A", thickness of concrete slab 100 mm complete all as specified and as directed by Engineer-in-Charge.
Material and labour for applying two coat of cement base paint on walls of newly plasterd surfaces including preparation complete all as specified and as directed by Engineer-in-Charge.
Taking down pipeline, any type,25/32 mm dia pipes fixed on wall/floor/ceiling and taking into credit complete all as specified and as directed by Engineer-in-Charge.
Supply and lay of 20 mm dia bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engineer-in-Charge.
Supply and lay of 25 mm dia bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engineer-in-Charge.
Dismantling of floor/ path tiling including cement mortar bedding & backing coat and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.
Material and labour for cement concrete type D-2, (1:4:8) using 40mm graded agregates, 100 mm thick as in sub base concrete, complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 100 mm thick, PCC (1:2:4) type B1 ,20mm graded stone aggregate as in top wearing layer, surface finished even and fair complete all as specified and as directed by Engineer-in-Charge.
Material and labour for cement concrete type D-2, (1:4:8) using 40mm graded agregates, 75 mm thick as in sub base concrete complete all as specified and as directed by Engineer-in-Charge.
Material and labour for providing machine pressed precast conctete interlocking paver block with grey cement & pigments, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed by Engineer-in-Charge.
Material and labour for sand filling under floors including necessary watering and consolidation complete all as specified and as directed by Engineer-in-Charge.
Material and labour for PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in copings, benching,kerbs water troughs and throating and similar works etc, complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Chequred cement concrete tiles 20cmx20cmx25mm thick set,jointed and pointed in neat cement slurry in floors with grey cement and pigments laid over 20mm thick screed bed in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.
Taking down old chowkhats or frames exc 1.5 sqm but n.exc 4 sqm each but with shutter (without taking off shutters from frame) complete all as specified and as directed by Engineer-in-Charge.
All as per item No 52 above but n.exc 1.5 sqm each complete all as specified and as directed by Engineer-in-Charge.
Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each complete all as specified and as directed by Engineer-in-Charge.
All as per item No 54 above but not exc 1 Sqm each complete all as specified and as directed by Engineer-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal/Almn frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones frames complete all as specified and as directed by Engineer-in-Charge.
Supply only 4mm thick ordinary quality sheet glass in squares n. exc 0.50 sqm each pane complete all as specified and as directed by Engineer-in-Charge.
Resecuring or easing and adjusting, without taking down shutters of any description n.exc 1 Sqm each complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing of powder coated (Min thickness of powder coating 50 micron) anodised aluminium frame section of door, windows, ventilation, partion wall, cup board with one or more rebates including joinging cleats for fixing etc. complete all as specified and as directed by Engineer-in-Charge.
Providing and fixing powder coated anodised aluminium door shutter, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door, hinges anodised aluminium snap beading, screws etc complete all as specified and as directed by Engineer-in-Charge.
Providing and fixing powder coated anodised aluminium window and ventilator shutters, hung/sliding type without sash bars, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading,screws, anodised aluminium fittingssuch as peg stays 150 mm long (1 No.) hinges type B-21 100 mm long (2 nos.) suitable handle (1 no.) etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fix aluminium(extruded section body) door closer hydraulically regulated designation No. 3, universal type suitsble for door shutter of 851 to 1000mm in width and of weight between 61to 80 Kg complete all as specified and as directed by Engineer-in-Charge.
Supply and fix inrepairs Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3 universal type suitable for door shutters of 851 to 1000 mm in width and weith between 61 to 80 kg, complete all as specified and as directed by Engineer-in-Charge.
Supply and fix inrepairss of brass 2 Levers Mortice lock, vertical type, size 100mm complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid , rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engineer-in-Charge.
Supply and fix factory made plain framed paneled shutters 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered panticle board with commercial face veneers fixed to chowkhat . The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure teated complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 35mm thick second class wood glazed and skeleton shutters open rebated and prepared to receive glass gauze etc... edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, wire cloth etc. complete all as specified and as directed by Engineer-in-Charge.
Supply and fix solid PVC door frame of size 50 x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling & fixing in opening complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Factory made solid PVC Moulded door shutter 28 to 30 mm thick(stiles) with 2,4,or 6 raised panel desilgn with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in ferame at site with wood free EPS complete all as specified and as directed by Engineer-in-Charge.
Supply and fix aluminium , anodised, barrel tower bolt of extruded section and fixed length of bolt 150mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fix aluminium alloy , anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy & fixed length of bolt 300mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fix floor door stopper of aluminimum alloy body and tongue,, anodised with hard drawn steel spring fixed in floor, overall length of cover plat 140mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fix aluminium handles cast type anodised, size of handle 150mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 100 mm long, complete all as specified and as directed by Engineer-in-Charge.
Supply and fix inrepairss, aluminium , anodised, barrel tower bolt of extruded section and fixed length of bolt 150mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fix inrepairss, aluminium alloy , anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy & fixed length of bolt 300mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fix inrepairss, floor door stopper of aluminimum alloy body and tongue,, anodised with hard drawn steel spring fixed in floor, overall length of cover plat 140mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fix inrepairss, aluminium handles, cast type anodised, size of handle 150 mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fix inrepairss Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 100 mm long complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 4 mm thick ordinary quality sheet glass and glazing with putty/ fixing with glazing clips, fixed in steel / wooden/aluminium frames complete all as specified and as directed by Engineer-in-Charge.
Supply and fix, Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge.
Supply and fix inrepairss, Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge.
Material and labour prepapration of new or previously untreated surfaces of wood or based materials of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.
Material and labour for non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectengular) area of each tile exc 0.06 sqm but not exc 0.09 sqm (300x300mm) in floors etc set and jointed in net cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed in CM (1:6) complete all as specified and as directed by Engineer-in-Charge.
Material and labour Glazed ceramic coloured tiles in vertical surface 350x250x7mm /450x350x7 mm thick set and jointed in net cement slurry and pointed in white or colour cement to match over 10 mm thick cement plaster in CM (1:4) complete all as specified and as directed by Engineer-in-Charge.
Supply and fix inrepairs Fancy type angular / corner Stop cock, 15 mm bore pipe , chromium plated cast copper alloy complete all as specified and as directed by Engineer-in-Charge.
Supply and fix inrepairs Fancy type Bib taps for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified and as directed by Engineer-in-Charge.
Supply and fix inrepairss for pillar tap, 15 mm bore chromium plated screwed down, high pressure screwed for iron pipe complete all as specified and as directed by Engineer-in-Charge.
Supply and fix inrepairs health faucet with hand shower, 1m long CP flexible pipe and wall hook, 15 mm dia bore of pipe, complete all as specified and as directed by Engineer-in-Charge.
Supply and fix inrepairs Fancy type swan neck type basin cock, for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified and as directed by Engineer-in-Charge.
Supply and fix inrepairs, PVC flushing cistern 10 ltr capacity including PVC connection pipes for inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and as directed by Engineer-in-Charge.
Supply and fix inrepairs, PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fix inrepairs, PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75 mm dia of outlet, complete all as specified and as directed by Engineer-in-Charge.
Taking down pip eline, any type, 20 mm dia pipes fixed on wall/floor/ceiling and taking into credit complete all as specified and as directed by Engineer-in-Charge.
Supply and lay of 20 mm dia bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engineer-in-Charge.
Supply and fix inrepairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed by Engineer-in-Charge.
Supply and fix inrepairs, Brass chromium plated shower rose 125 mm size, including CP shower arm, 15 mm bore of pipe, complete all as specified and as directed by Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.
Supply and fix of rolled mild steel conforming to Fe 410-W (GdeE-250) quality A for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed by Engineer-in-Charge.
Supply and fix mild steel, plain, black sheet 1.25mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc fixing complete all as specified and as directed by Engineer-in-Charge.
Material and labour prepapration of new or previously untreated surfaces of steel or based materials of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed by Engineer-in-Charge.
Dismantling tiling of single layer Mangalore Pattern roof tile laid in cement mortar complete all as specified and as directed by Engineer-in-Charge.
Material and labour for roof tiles, Mangalore Pattern, interlocking at side, the size of tile shall match with existing tile, including joints laid in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge.
Material and labour for ridge tiles, Mangalore Pattern, set and jointed in CM (1:6) complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Rendering 10 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Rendering 5 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of new plastered surface of wall and applying 1.5 mm thick wall care putty and making the surface smooth followed by Two coats of Distemper oil emulsion, acrylic distemper (ready mixed), of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a coat of alkali resistant primer complete all as specified and as directed by Engineer-in-Charge.
Material and labour for three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of newly plastered and concrete surfaces and applying two coats of exterior emulsion weather proof paint (Appex Ultima or equivalent) of any colour, over a coat of exterior primer, over a coat of cement based exterior putty not less than 1mm thick on wall/column projection, chajjas sides and bottom, roof projection, wall etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation old decorated painted surfaces of walls and applying one coat of exterior weather proof emulsion paint complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Complete removal of existing treatment and applying two or more coats of 100% Premium acrylic weather proof emulsion paint having VOC less than 50 gMaterial and labouritre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation old decorated painted surfaces of ceiling and applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation old decorated painted surfaces of walls and applying one coat distemper oil emulsion complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation old decorated painted surfaces of walls and applying one coat cement base paint, for compound walls, manholes, septic tanks, kerbs, valve pits etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for one coat of synthetic enamel paint on wooden surfaces including preparation of old surfaces over 10cm width or girth complete all as specified and as directed by Engineer-in-Charge.
Material and labour for one coat of epoxy enamel paint on steel surfaces including preparation of old surfaces over 10cm width or girth complete all as specified and as directed by Engineer-in-Charge.
Anaswara Constructions
KRA Engineering and Construction
STANDARD ENGINEERING
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .