Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹2.4 L
EMD Value
₹11,850
Closing Date
28 Sept 2023, 11:00 amClosed
Executive Engineer JSD PHE Mech Rural Division Sgr
Executive Engineer JSD PHE Mech Rural Division Sgr
Providing, Installation, Testing and Commissioning of various Electro-mechanical items at various WSSs of Sub-Division Peripheral.
2023_PHE_230725_2
PHE/MRD/TS/ 85 of 09/2023
Open Tender
Miscellaneous Works
Item Rate
12 days
Srinagar
Please refer Tender documents.
2 documents required · 2 mandatory
₹100
Yes
Executive Engineer JSD PHE Mech Rural Division Sgr
₹11,850
Yes
4 Oct 2023
21 Sept 2023
28 Sept 2023
21 Sept 2023
28 Sept 2023
21 Sept 2023
Amount
WSS Malpora Providing & fitting of 16 Sq.mm 3-core,415 ± 10% V standard insulated copper submersible cable conforming to IS 694:1990 to be fitted with pumping unit from main control panel to modular control panel & interconnection of various other electrical gadgets. The job also includes providing, fitting, crimping and taping suitable amperage Copper thimbles at the ends of the conductor by hydraulic crimping. Note:- The Test certificates from the OEM of the cable should be provided/produced at the time supply
WSS Malpora Providing and fitting of Ductile Iron double flanged, Slanted seat 100 mm diameter swing check valve ( NRV) as per IS 5312. The body shall be of ductile cast iron with fully encapsulated vulcanized EPDM rubber (Approved for drinking water). The valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions. It shall have electrostatic epoxy coating (approved for drinking water) both inside and outside of the valve. Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work. The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with Rising main of the pumping unit at appropriate spots as per site requirement
WSS Malpora Supply, Installation of 2 ton capacity chain pulley blocks having following specifications:- Make = Indef/Pul lift or standard equivalent Capacity = 2 ton Min. Height of lift = 3m Note:- The Test certificates from the OEM of the equipment should be provided/produced at the time supply
WSS Narbal Providing & fitting of 16 Sq.mm 3-core,415 ± 10% V standard insulated copper submersible cable conforming to IS 694:1990 to be fitted with pumping unit from main control panel to modular control panel & interconnection of various other electrical gadgets. The job also includes providing, fitting, crimping and taping suitable amperage Copper thimbles at the ends of the conductor by hydraulic crimping. Note:- The Test certificates from the OEM of the cable should be provided/produced at the time supply
WSS Narbal Providing/ fitting of MCCB at above WSS with following specifications: - Circuit Breakers: - = MCCB. Qty. = 1no Thermal Release range = 200-250 No. of poles = 4 Rated Current = 250 Amp. Rated operational voltage = 415 V + 5 % Rated frequency = 50 +/- 3 % Hz Ambient temperature = 40C˚ Ultimate S.C Breaking Cap. at (415, ac, 50 Hz) = 50 KA Type of release = Thermal Magnetic
WSS New Colony Nendwandpora Providing, Installation, Testing and Commissioning of Fully automatic Star-Delta Submersible Motor Starter, having Relay Range 28-42 Amp). The starter shall be sheet enclosure type suitable for operating on 3 – phase, 415 V, 50 Hz AC Power Supply. The starter shall be able to provide single phase, phase reversal, phase imbalance and overload protection to the motor. The starter shall also consist the On/OFF, voltage and current indication meters & minor wiring of starter is also included in the job.
Competent Engineering Works
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .