SPECIAL REPAIRS TO SECURITY FENCING ADJOINING TO SHIKARBADI AT MIL STN UNDER AGE (I) UDAIPUR

Amount

Dismantling fencing, wire mesh Chainlink fencing any type from angle iron posts or from RCC posts complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion (post embedded in concrete, brick work, stone masonry, ground etc) and making good disturbed concrete/masonry/ground complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) complete all as specified and directed.

M&L for Providing precast cement concrete 1:2:4, type B1 using 20mm graded stone aggregate and setting in cement mortar 1:4 as in fencing posts, boundary pillars, bed plates, man hole covers etc., (of any section indicated), with plain fair faces, including chamfers, weatherings, throating, necessary form work, mouldes etc. complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, removing the surplus soil to a distance not exceeding 50m and depositing complete all as specified and directed.

M&L for PCC 1:3:6, type C2, using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for Mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) as in posts, fencing posts etc fixed in position, mild steel sections confirming to Fe-410 (Gde E-250) (Quality-A) complete all as specified and directed

M&L for Mild steel works as in securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Supply only Chain link MS galvanisd fencing with 3.15mm dia wire and mesh size of 50 x 50mm complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed

S&F Mild steel screw bolts of length exceeding 5cm and not exceeding 10cm and 11 to 15mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm long complete all as specified and directed

M&L for preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed

M/s SUNIL ENTERPRISES

M/s Ajay kumar Garge

shree nathji trading corporation