Electrical Installation Work

Amount

Supply & Laying of 1.1 KV grd. 4 x 35 sq. mm. XLPE/ PVC/Ar. Al cable in GI pipe / floor / wall as deemed fit as per direction of the EIC. (Havells/ Polycab / KEI )

Supply & Fixing of compression type gland for 4x35 sq mm PVC / XLPE /Ar Al. cable as to GS.

Finishing the end of following XLPE / PVC armouned cables by crimping method as to GS. i) 4 X 35 Sq.mm

Supply & fixing of 50mm dia medium gauge GI pipe ( ISI-M ) protection with necessary fittings and jointing materials as required as to GS.

Supply of 1.1 KV grd. 4 x 16 sq. mm. XLPE/ PVC/Ar. Al cable in GI pipe / floor / wall as deemed fit as per direction of the EIC. (Havells/ Polycab / KEI )

Laying of cable upto 4 core 16 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supply & Fixing of compression type gland for 4x16 sq mm PVC / XLPE /Ar Al. cable as to GS.

Finishing the end of following XLPE / PVC armouned cables by crimping method as to GS. i) 4 X 16 Sq.mm

Supply of 1.1 KV grd. 2 x 10 sq. mm. XLPE/ PVC/Ar. Al cable in GI pipe / floor / wall as deemed fit as per direction of the EIC. (Havells/ Polycab / KEI )

Laying of cable upto 2 core 10 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supply & Fixing of compression type gland for 2x10 sq mm PVC / XLPE /Ar Al. cable as to GS.

Finishing the end of following XLPE / PVC armouned cables by crimping method as to GS. i) 4 X 10 Sq.mm

Supply of 1.1 KV grd. 4 x 25 sq. mm. XLPE/ PVC/Ar. Al cable in GI pipe / floor / wall as deemed fit as per direction of the EIC. (Havells/ Polycab / KEI )

Laying of cable upto 4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supply & Fixing of compression type gland for 4x25 sq mm PVC / XLPE /Ar Al. cable as to GS.

Finishing the end of following XLPE / PVC armouned cables by crimping method as to GS. i) 4 X 25 Sq.mm

Supply & fixing of 40mm dia medium gauge GI pipe ( ISI-M ) protection with necessary fittings and jointing materials as required as to GS.

Supply & fixing of 25mm dia medium gauge GI pipe ( ISI-M ) protection with necessary fittings and jointing materials as required as to GS.

Supplying and fixing of 100/125A Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc(HPL/Havells)

Supplying and fixing of 415V, 63A Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc(HPL/Havells)

Supplying and fixing of 240V, 32A Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc(HPL/Havells)

Making permanent Shade for 9 no Silent DG set by GI sheet on roof after making MS angle iron structure as per direction of E.I.C.

Earthing with 50 mm dia, ISI-Medium GI pipe of 3.64 mm thick x 3.04 Mts. long and 1x25x6mm GI (Hot Dip) strip (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. filling with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as per GS.

Supply & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required as to GS.

Excavation of soil for installation of Earth Electrode and filling & ramming. (For Morrum Soil)

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Supply and fixing of 415 V 63 A TPN Main switch in SS enclosure fixed on angle iron frame on wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment as to GS. (Make- HPL / ABB / L&T)

Supply and fixing of Double Door type 6-Way TPN MCB PDB comprising with 1 No. 440V 63A 4-Pole Isolator as incomer and 18 nos. 250 V 16-32 A SP MCB as outgoings complete with DIN Channel, Neutral Bar, Earth Bar and other accessories on angle iron frame on wall incl. necsy. earthing attachment as to GS. ( Make : L&T / HPL / ABB)

Supply and fixing of 250 Volt 2+8 way SPN MCB BDB in SS enclosure double-door type IP-42/43 protection with 40A DP isolator as incomer & 8 nos. 6/10 A SP MCBs (‘C’ curve, 10 KA) as outgoings on angle frame on wall & mending good the damages to original finish incl. inter connection with suitable size CU wire & neutral link & provision for earthing attachment as to GS. (Make- L&T / ABB / HPL)

Supply and fixing of 240 V, 3 nos. 6A plug socket with separate 3 nos. 6 A Piano key type switch with indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover with 3 nos. suitable size “Ph, N & E” copper bar and making necessary connections as required as to GS.

Supply and fixing of 240 V, 20A plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required as per GS.

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish (Avarage run 6 Mtrs) as to GS.

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish as to GS.

i) On Board

ii) Avarage run 6 Mtrs

Distribution wiring in 1.1 KV gr. single core stranded 'FR' PVC insulated & unsheathed copper wire (approved make) in 20 mm bore PVC rigid pipe on wall for interconnections between Main switch to TPN DB, TPN DB to SPN DB and SPN DB to different switches / plug boards as per GS as follows :-

(a) 2 x 6 sq mm + 1 x 4 sq mm(ECC)

( b ) 2 x 2.5 sq mm + 1 x 1.5 sq mm(ECC)

(c) 4 x 10 sqmm + 1 x 6 sqmm as ECC

Supply & Fixing of solderless socket for finishing the wire ends by socketing as per GS as follows :-

(a) 2 x 6 sq mm + 1 x 4 sq mm

( b ) 2 x 2.5 sq mm + 1 x 1.5 sq mm

(c) 4 x 10 sqmm + 1 x 6 sqmm

Supply & Fixing of 250 Volt, 4 Ft. long 20 Watt LED CRCA MS box type DOUBLE tube light fittings with LED retrofit T8 tube suspended below the ceiling by 2 nos. 20mm. dia. E.I. Conduit support with L- type clamp incl. necy. connection by 3 x1.5 mm² PVC insulated Cu. Wire & painting as to GS. ( Make : Philips, Cat No. TMC 501 P 2xT-LED 22W P3242 / Brijstar or Equivelent Make)

Supply & Fixing of 250 Volt, 4 Ft. long 20 Watt LED CRCA MS box type SINGLE tube light fittings with LED retrofit T8 tube suspended below the ceiling by 2 nos. 20mm. dia. E.I. Conduit support with L- type clamp incl. necy. connection by 3 x1.5 mm² PVC insulated Cu. Wire & painting as to GS. ( Make : Philips, Cat No. TMC 501 P 1xT-LED 22W P3242 / Brijstar, or Equivelent Make)

Supply & Fixing of 240V 11/9 Watt LED lamp on battaen point/ bracket as per direction of the EIC.

Supply & Fixing of 230 V,9" sweep,1370 rpm heavy duty exhaust fan incl. louver shutter after cutting the hole and mending good as per GS. ( Make : EPC )

Supply & Fixing of 240V 20W LED bulkhead light fittings with necessory fixing materials and necy. connection by 2 x 1.5mm² PVC insuld. Cu. Wire & painting (Make:: Philips :Cat No.WT202W LED 6S NW PSU S2 PC / Brijstar, RUGBY 10) or Equivelent Make

Supply and fixing of 240 V 32 A Main switch in SS enclosure fixed on angle iron frame on wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment as to GS. (Make- HPL / ABB / L&T)

Supply & Fixing of 240V 40W LED water proof out door type street light fittings fixed on wall by 32mm dia GI pipe with all other necessory fixing materials and necy. connection by 2 x 1.5mm² PVC insulated Cu. Wire & painting (Make:: Philips, Model- BRP409 LED CW 040 HO MR FG S1 PSU GR / Bajaj or equivelent)

Supply and fixing of 10mm Hylam Sheet board (12"x18") on wall with necy nuts, bolts etc as required.

LINK ENGINEERS CO-OP LAB CON AND CONST SOCIETY LTD

A.K.CHOUDHURY AND SONS