WBHD/EE/ED-1/eNIT-108/2025-26

Amount

Sub Head 01 - Distribution Wiring Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC Average run 8 mtr

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC On board

Sub Head 02 Switch & Socket Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works (Legrand myrius or equivalent model as per direction of E.I.C) 4 Module

6 Module

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works.2 Module

Supply & Fixing 240 V 6 A Modular type switch on existing GI Modular type switch board having top cover plate and making necessary connections as required .(Make: Legrand/Seimens/Schneider/ABB/L&T) as approved by EIC

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Make: Legrand/Seimens/Schneider/ABB/L&T) as approved by EIC

Supply & Fixing 240 V 16 A Modular type switch on GI Modular type switch board having top cover plate and making necessary connections as required. (Make:- Legrand/Cabtree/Schneider)

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket, without plug top and switch, on existing GI Modular type switch board with topcover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Make: Legrand/Seimens/Schneider/ABB/L&T) as approved by EIC

Supply & Fixing 240 V, 10 A, 2(Two) way Modular type switch (approved make) on existing GI Modular switch board having top cover plate and making necessary connections as required (Make: Legrand/Seimens/Schneider/ABB/L&T) as approved by EIC

Sub Head 03 - BDB,PDB,VTPN ETC Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+12 Way (Make: Legrand/Seimens/Schneider/ABB/L&T) as approved by EIC

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. Up to 160A- 4 way (Make: Legrand/Seimens/Schneider/ABB/L&T) as per direction of E.I.C.

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection. 125 A FP (Make: Legrand/Seimens/Schneider/ABB/L&T) as per choice of E.I.C

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall as per GS. (Make: Legrand/Seimens/Schneider/ABB/L&T) as per direction of EIC. ) 4 Way

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as per GS (Make: Legrand/Seimens/Schneider/ABB/L&T) as per direction of EIC. ] 63 A FP

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [Make: Legrand/Seimens/Schneider/ABB/L&T) as per direction of EIC. ] 63 A TP

Sub Head 04 - Cables & Wires Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required (RR/Polycab/Finolex as per choice of E.IC) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2x2.5 sqmm+1x 1.5 sqmm ECC (For Power Board)

2x4 sqmm+1x 2.5 sqmm ECC (For Geyser+AC)

2x6 sqmm+1x 4 sqmm ECC) (For SPN DB)

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required (KEI/Polycab/Finolex as per choice of E.IC) 4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC (VTPNDB to HTPNDB)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.2.5 sqmm

Supply of 4 Core 25 sqmm XLPE Insulated & Sheathed Armoured stranded Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make Polycab / RR /GlosterI/ as approved by E.I.C]

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Gland & Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.(xiii) 4 core 25 sqmm cable

Sub-HEAD-5-- Light Fittings Supply and fixing of 15-watt Round LED Downlighter Recessed LED Downlight for False Ceiling, LED Ceiling Light for Home and Hall of Cut Out: 6 inch, Cool Day Light (Make:- Philips DN296B LED15S-6500 PSU WH o its equivalent of Crompton/ Wipro as per direction of E.I.C)

Supply and fixing 14 W LED bulb (make- Phillips/Crompton/wipro as approved by E.I.C) on existing batten holder

Supply & Fixing metal body decorative single head wall light fittings with 15 watt warm white light on wooden circular board (Make philips / crompton/bajaj/ Philips Muziris)

S&F 7.5 W LED 450lm Decorative type mirror light (make- Phillips/Crompton/wipro as approved by E.I.C)

Fixing of 3 Module 2W, 3000K LED Foot Light fittings. incl. S/F 3 Module MS flush box in wall as per approval of EIC/Authority.

Supply and fixing of LED strip light (over all length 5mtr) (Make- Phillips/Crompton/wipro as approved by E.I.C) including necessary connections.

Supply & Fixing Celling Hanging decorative Chandelier Light (Jhumur) for Drawing & Dining space ( Make -Philips Model No. 581864 Colour Mirror stainless Steel Dimensions (mm) Dia 465 x H 1450 Lamp base G9 Wattage 6x42W Max* Lumen/CC or its equivalent of Crompton/wipro as approved by E.I.C)

Supply & Delivary Ornate Wood E27 1*Max20W Table Lamp For Bed Room ( Make- Philips, Model No. 582026 Colour Natural wood finish Material Wooden Wooden Dimensions (mm) 260x260x485 Lamp base E27 Wattage 1 X 20W (Max.)* Lumen/CCT or its equivalent of Crompton/wipro as approved by E.I.C

SUB-HEAD 06 --MISCELLANEOUS Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Supply of Heavy duty exhaust fan 80 Watt, 230 mm (9'') sweep 1370 RPM (Make EPC or equivalent model of USHA) as per choice of E.I.C

Fixing only exhaust fan after making hole in wall and making good amages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: b) 23 cm (9")

Supply and Fixing of 10 L Geyser (5 Star Rated) incl. necessary holding clamp (Make:Havells-Fabia/Bajaj or equivalent model as approved by EIC/Authority) incl. IN/OUT hot & cold wter pipe line of good quality and necessary inetrconnection as per direction of EIC

Supply and Fixing of 25 L Geyser (5 Star Rated) incl. necessary holding clamp (Make: Havells-Fabia/Bajaj or equivalent model of Venus as approved by EIC/Authority) incl. IN/OUT hot & cold wter pipe line of good quality and necessary interconnection as per direction of EIC

Supply of 2000W Heat Convector Room Heater. [Instant Warmth: 2000 Watts Heat Convector Room heater, Customized to heating needs with an adjustable thermostat and two heat settings (1000 W/ 2000 W) ,Featuring auto thermal shutoff to prevent overheating & RX8 comes with an adjustable height setting for convenience. (Make: Bajaj Majesty RX 8 2000 Watts or equivalent model of Havells/USHA as per choice of E.I.C) (Colour: Black, ISI Approved)

SITC of 50 Hz 230V, 1200 VA Micro Controller Based Intelligent Control Design Inverter suitable of 8 hrs back up for Load upto 1200va with following spefication- VA Rating: 1200VA/12V; Max. Peak Load: 960 watt, Inverter Compatibility: Designed for all types of power cut situations with high charge acceptance and low maintenance,Efficiency >80%,Battery Compatibility - Compatible with 1 X (12V) battery of Capacity Between 100 Ah-200 Ah Battery. The Ups Supports wide range of Batteries Like A Flat Plate, Tubular, Smf (To Be Purchased Separately,Display: Digital LED display for status of Power back-up/battery charging time in Hours and Minute,Item Dimensions: 42 x 45 x 22 CM ; Item Weight: 16Kg. (Make-Microtek,model Number UPS SEBz 1200VA/ Luminous/ Amaron/Exide)

Supply & replacement of 150 AH, 12V Mono Block battery suitable for Microtek Inverter (900-1200 Watt) as per direction of EIC. [Make-Exide, Model no-EP150-12 or equivalent model of Amar Raja(Quanta)].

Supply and delivery of Microtek Brand/or equivalent model of Luminous brand All-in-one (AIO) Trolley Compatible for All Types of Batteries (Single/Double/Jumbo/Flat Plate/Tall Tubular Battery)

SITC of 32 inch model LED Smart TV, HD Quality resolution of 1366 x 768 pixel of Model No- KD32W825 (Make- Sony/Samsung/ LG)or equivalent model as per choice of E.I.C

SITC of 43 inch model LED Smart TV, HD Quality resolution of 3840 x 2160, 4k UHD pixel of Model No- K43S20B (Make- Sony BRAVIA 2/Samsung/ LG)or equivalent model as per choice of E.I.C

SITC of Hand Dryer Automatic Household Commercial Electric Automatic Sensor, 1600 Watt for Bathroom (make: Philips/ EASY2HOME®/ Plantex/ Euronics or equivalent model as per choice of E.I.C)

Sub Head 07---- Earthing :- Excavation of soil for installation of Earth Electrode and filling & ramming. B) For Morrum Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: a) By ISI-Medium GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages (a) iii) No 8 SWG

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles. 19 mm dia 3 mm thick polythene pipe without earth continuity wire

SUB-HEAD 08 -- Lightning Conductor S & F Lightning Conductor Air Terminal made of 20 mm dia 1000 mm long GI pipe (ISI Medium) having five discharge prongs of 4 SWG GI (Hot Dip) wire at top duly soldered with 7/16 stranded GI (Hot Dip) wire and 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. complete duly grouted on the parapet etc. in CC mortar (4:2:1) as per GS

Supply & Fixing 7/10 SWG GI (Hot Dip) stranded wire for Horizontal run on the parapet/roof/wall with GI saddles spaced not exceeding 1100 mm apart incl. mending good the damages to building works

Supply & fixing of 7/10 SWG stranded GI (Hot Dip) wire for vertical run on wall with GI saddles spaced not exceeding 1000 mm apart incl. mending good the damages to building work

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run

Supply & Fixing of Testing Joints by 20 mm x 3 mm thick GI (Hot Dip) strip 125 mm long grouted on wall having clearance of 6 mm from wall for making connection with thimbles at the end of 7/10 SWG GI (Hot Dip) stranded Wire and 4 SWG GI (Hot Dip) wire of vertical conductor and conductor from earth electrode complete with S & F thimbles, GI bolts, nuts, check-nuts, spring washers etc. as required

Earthing with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 x 19/10 stranded GI (Hot Dip) wire (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including socketing at both ends of stranded GI (Hot Dip) wire by crimping sockets/ thimbles and S & F 40 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts

Excavation of soil for installation of Earth Electrode and filling & ramming as to GS. (For morum soil)

Making soldered joints between conductor/ down pipes / other metallic objects by 7/10 stranded GI (Hot Dip) wire incl. supply of jointing materials & painting with 2 (two) coats of Bituminous paint

Making soldered joints between conductors, conductors and air terminals for 4 SWG GI (Hot Dip) wire incl. supply of jointing materials and painting with 2 (two) coats of bituminous paint

Connecting the equipments body to earth busbar incl. S & F 50 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc.

SUB HEAD- 09-----Intercom System (EPABX), Internet system SITC of 20 Pair Un armoured Teeptore cable. (0.5mm. Dia (Minimum)) DELTON/FINOLEX/POLYCAB

SITC of 50 Pair Telephone DB, Powder coated sheet steel 18SWG with Backmounting frame, original KRONE Module and locking arrangement. Make as per sample

SITC of 20 Pair Telephone DB, Powder coated, Epoxy Painted sheet steel 18SWG with Backmounting frame, original KRONE Module and locking arrangement. Make - as per sample

SITC of Non CLI Analog Push Bution Telephone Set (Make :- NEC, BEETEL Matrix, Unify, Binatone, Avaya or Equivalent. Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service

ITC of I/O port adpater RJ11 with Gl box and Single face cover plate etc Make: Legrand, R & M. Tyco, Commscope Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

SITC of EPABX with provisin of comection of 4 CO line and 32analogue extension and expandable upto 64 analogue extension. Power Supply: Typically 110 to 275 VAC, 50 Hz (or 90W SMPS), Power Backup: Built-in Battery Charging Circuit, Operating Temperature: 0 to 50°C, Technology: Digital TDMPCM Non-Blocking, Stored Program Control, Distributed Processing Architecture. Make-Syntel Neos, Unify, Matrus, Conel, Avaya Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service

Supply & Fixing RJ45 sitable for CAT6 cable (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required

SITC of Networking Horizontal unArmoured cable, 1000Base-T (Gigabit Ethernet) , 100Base-T (Fast Ethernet), 10Base-T (Ethernet), 1-500 MHz (minimum) category-6, 4 pair,U/UTP, 24 AWG Solid bare copper conductor with FEP insulation, polyester separator, overall shield, Flame arrest jacket LSZU Outer sheath Cover as to standard of ISO/IEC 11801Ed 2.0, EN 50173-1 and TIA/EIA 568C Make: 3C3, Molex, Legrand, R & M, beldon, Tyco, Comscope

SITC of Universal Wi-Fi 6 Router, Dual Band, Mesh Ready, Upto 6 Gbps Speed, 8K Streaming, WPA3 Advanced Security, MU-MIMO, OFDMA, Wide Coverage, Easy Setup, with minimum 1 year recharge(make: JioHome App (JIDU6801 IN) Jio AX6000 or equivalent model of D-Link/ ASUS or as per choice of E.I.C)

SUB HEAD- 10 ----Compound Light Supply & Fixing decorative type post top light with IP65 Protection incl. All accessories i.e, GI Pipe, reducer, nuts, etc ( Make Crompton-LPTH-20-WW or equivalant to Philips/Wipro)

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.3x 22/0.3 (1.5 sqmm)

Add. G.S.T.@ 18% (on Total from item no 1 to 90) to be calculated by bidder

Add. LWC.@ 1% to be calculated (on total from item no 1 to 90 + GST@18%) by bidder

M/S. GOPAL ELECTRICALS (BID ID -6849804)

SARKAR ENTERPRISE (BID ID -6849822)