REPAIR AND MAINT TO PLUMBING, JOINERY, SANITARY FITTINGS AND FLOORING IN OFFICERS MESS, SNCOS MESS, AND AIRMEN BILLET OF CAMERO COMPLEX AND REPAIR TO SHAFT, CEILINGS, VERTICAL SURFACES IN OTM, OMQ, SMQ, CIVIL ZONE, MES COLONY, (MAP QTRS

Amount

S&F 15mm bore steel water tubing medium grade, galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors, Including taking down steel tubing or removing from site, complete all as specified and directed

S&F 20mm bore steel water tubing medium grade, galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors, Including taking down steel tubing or removing from site, complete all as specified and directed

Dismentling existing water tank and removing from site and S&F Rotational moulded PVC water tanks of 500 Ltr capacity, cylindrical vertical with closed top hoisted and fixed in postion icluding complete all as specified and directed

Dismentling existing water tank and removing from site and S&F Rotational moulded PVC water tanks of 1000 Ltr capacity, cylindrical vertical with closed top hoisted and fixed in postion icluding complete all as specified and directed

S&F ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified and directed

S&F in repairs long body bib taps, cast copper alloy, fancy type with crutch or butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15mm bore. complete all as specified and directed

S&F in repairs angle valve ,stop valve, cast copper alloy, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore. complete all as specified and directed

S&F in repairs pillar tap, cast copper alloy, chromium plated, with capston heads screwed down, high pressure with or without lettered hot or cold with long screwed shames and fly nuts, screwed for 15mm bore pipe complete all as specified and directed

S&F in repairs wall mounted Vitreous China wash down water closet pan, white and including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, Plastic water closet seat, black / white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc. complete all as specified and as directed

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) excluding flushing cistern and flush pipe and including P or S trap and seat cover complete all as specified and as directed

S&F in repair vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, ‘P’ trap 110mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed .

S&F in repair PVC flushing cistern of 10 ltr capacity valveless, symphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including flush pipe of 32mm bore PVC and 15mm bore PVC connection 200mm long to pipes etc and taking down existing flushing cistern complete all as specified and as directed.

S&F in repairs vitreous china half stall urinals bowl type (back or corner wall type) complete including providing and fixing plugs bedding urinals against wall in cement mortar 1:2 securing urinal to plugs, with and including 60mm long brass screws complete all as specified and directed.

S&F in repairs brass chromium plated hand shower (health faucet) with 1.0 m long easy flex tube in chrome finish and wall hock, approved make complete all as specified and as directed

S&F in repair PVC waste pipe 32mm bore, 0.90 m long complete all as specified and directed

S&F in repair brass chromium plated shower rose 150mm size with or without swivel joint and fixed for 15mm bore pipe complete all as specified and directed.

S&F in repair PTMT long body bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe and fixed complete all as specifed and directed

S&F in repair PTMT stop cock 15mm dia pipe with screwed for iron pipe and fixed complete all as specifed and directed

Taking up or down CI/PVC pipes (incl all fittings), and S&F PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc complete all as specifed and directed

Taking up or down CI/PVC pipes (incl all fittings), and S&F PVC (SWR) pipes 75 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc complete all as specifed and directed

Taking down frame or Chowkhats with shutters (without taking off shutters from the frames) of any description not exc.1.5 Sqm each incl necessary repair to opening with CM 1:4 complete all as specified and directed

S&F window/Ventilator section of frame 72x55 mm fixed to wall or concrete surface with MS hold fast (30x5 mm section) 150 mm long made of galvaniszed steel powder coated and section of shutter 47x20 mm, mulion section 72x50 mm (base steel as per IS 513 'D' quality galvanzed as per IS 277 with zinc of 120 gms/Sqm) glazed or gauzed and wire gauze shutter prepare to receive wire mesh to the shutter (Double door shutter) with total coated thickness of 0.60 mm including poweder coated grill/guard bars made of square bars 10 mm dia at 150 mm c/c horizontal spacing fixed in MS flat frame (30x5 mm) fixed to windows frame with screws, including 4 to 5 mm thick sheet glass, 0.36 mm stainless steel wire cloth with 1.40 mm aperture necessary fittings and all builders hardware such as handles, tower bolts & stays etc complete all as specified and as directed by Engineer-in-charge. Type-4000 series ref drg No CEAF/STD-191/2014 SH1/2&2/2.

S&F Solid PVC Door Frame of size (50x47)mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, complete all as specified and directed

S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, complete all as specified and directed

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed

S&F 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 125mm long Aluminium alloy handles of extruded section fabricated type anodised and fixed, complete all as specified and directed

Taking down Door shutter of any description exc.1.0 Sqm but n exc 2 Sqm each incl necessary repair to opening with CM 1:4 complete all as specified and directed

S&F 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides, complete all as specified and directed

M&L Preparing surfaces of new wood and wood based materials of any description , not otherwise described over 10cm width or grith and applying with two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed

S&F 125mm long mild steel barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed .

S&F 150mm long Aluminium alloy handles of extruded section fabricated type anodised and fixed, complete all as specified and directed

S&F 250mm long mild steel sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed

M&L for Dismantling of floor, hearth or wall tiling including cement mortar bedding/backing etc, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed

M&L for vitrified ceramic tiles (light shades) of 9-10 mm thick polished area of each tile n.exec.36 Sqm laid as in floors setting and jointed with cement slurry over & including 15 mm thick screed bedding layers of cement sand mortar ( 1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and das directed

All as per above item on vertical surface such as dado/skirting, including Rendering/backing 10mm thick in CM 1:4 on brick wall surfaces, other than fair faces of brick work finished even and fair to receive tiles, complete all as specified and directed

M&L for Non-skid coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floors/wall etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over including 15 mm thick screed bead in CM 1:6, complete all as specified and directed

M&L for Glazed ceramic coloured tiles of size (450x300x7)mm thick on vertical surface such as in dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles and including 10 mm thick backing coat in CM (1:4) including dismantling of tiles complete all as specified and directed

Dismantling to Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed

M&L for Green Marble work 16 to 18mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade. complete all as specified and directed

M&L for Pre polished Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, and including 15 mm Screed bed or bedding layer of CM 1:6 complete all as specified and directed

S&F in repair 25 mm dia stainless steel fancy type brackets & stainless steel fancy type finale caps etc including fixing arrangements, complete all as specified and directed

S&F in repair 25 mm dia stainless steel curtain rods heavy duty including fixing arrangements, complete all as specified and directed

Dismantling brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles and incl M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. raking out joints ,hacking for key and scrubbing down with water upto 4 storeys building, complete all as specified and directed

M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement upto 4 storeys building with water proofing compound complete all as specified and directed

M&L for 10 mm thick cement plaster in cement mortar 1:6 on brick surfaces on fair face of brick work and finished even and smooth w/o using extra cement complete all as specified and directed

M&L for 5 mm thick cement plaster in cement mortar 1:3 on concrete or brick surface and finished even and smooth w/o using extra cement as in ceiling complete all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying two coats exterior emulsion over a coat of exterior primer, complete all as specified and directed

M&L for preparation of new surface and applying two coat of oil bound distemper on wall incl Priming plastered and other surfaces with alkali resistant priming paint over a coat of wall care putty complete all as specified and directed

M&L for preparation of new surface and applying three coat of white wash on ceiling, complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level, complete all as specified and directed.

M&L for 50mm thick Cement concrete type D 2, 1:4:8 (40mm graded stone aggregate) in sub bases, sub floors etc. complete all as specified and directed

M&L for Johnson endura paving tiles of technocommercial equivalent of size 300mmx300mmx10mm thick set and jointed in neat cement slurry and pointed with white cement to match the joint over including 15 mm Screed bed or bedding layer of CM 1:6, complete all as specified and directed

M&L for sand cushioning/ filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment laid, incl dismantling of old existing/ damage paver block complete all as specified and directed

Dismantling of ceiling, panelling or boarding including frame works complete all as specified and directed

M&L for false ceilings using GI snap grid system with roll-formed out of hot dip galvanised steel caping (powder coated) main runner 38 x 24 mm , cross Tee 29 x 24 mm and wall angle 24 x 24 mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg/Sqm with 4mm thick designer ceiling board , pre painted cement fiber board size 595 x 595mmx 4mm thick any texture (Lake and Hill, oceaniccascade or Electra) as approved by GE at any height complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats, etc. FE 410-W (Gde- E-250) quality A, complete all as specified and directed

M&L for Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings. complete all as specified and directed.

M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M&L for Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick in ridges of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Taking out of APP modified water proofing membrane and demolition of loose or undulate concrete surface complete on roof surface and surface properly cleaned by wire brush complete all as specified and as directed

M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and directed by Engineer-in-Charge.:- (a) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface. (b) Applying evenly a tack coat of bitumen 85/25 grade @1.20 kg/ sqm. (c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc. (d) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame. Note:- This treatement shall be done by the approved authorized applicators and guarantee of treatement shall be minimum 10 years complete all as specified and directed

M&L for 2 coat of aluminium paint incl preparation of newly or previously untreated surfaces of any description, over 10cm width or girth, not otherwise described complete all as specified and directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided

M&L for Cement concrete (1:5:10) type E2 (using 40 mm graded stone aggregate) as in filling, mass/ cinder concrete, complete all as specified and directed

M&L for 25 mm thick PCC 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregates) as in floor surfaces, complete all as specified and directed.

M&L Providing water proofing treat ment to RCC sunken slab as specified and directed as under (a) cleaning the existing RCC sunken slab and vertical wal/ RCC beam and hacking the surface. (b) 15 mm thick plastering over floor & vertical surfaces in 1:4 mixed with liquid water profing compound @ 200 per 50 kg of cement troweled to even and smooth finish without using extra cement. (c) Filling the sunken portion with water for 72 hrs and carrying out the ponding test (Any leakage / seepage noticed shall be repaired). (d) Applying two coats of elastometric acrylic water proof coating make Dr. Fixit of pidlite, Tapecrete from Cico or equivalent in sika as per sqm in each coat with roller application (Note each coat of elastomeric acrylic compound reqiuires 6-8 hrs to dry up itself second coat shall be applied on getting the first coat completely dried up. Min quantity required for coating as per manufacture instruction) complete all as specified & directed

S&F in repair corner glass shelf with bracket of make- Jaquar/ MARC/ GEM/ PARKO or Equivalent. complete all as specified and directed

Removal of excavated, demolition or dismantling of bldg finishes material for a distance exc 5 Km but n.exc 10 Km and depositing outside the defence premises, complete all as specified and directed

S&F PVC SWR bends 110 mm dia, Complete all as specified and directed

S&F 110 mm PVC (SWR) branch piece, (Y or T) type, Complete all as specified and directed

S&F PVC SWR bends 75 mm dia, Complete all as specified and directed

S&F 75 mm PVC (SWR) branch piece, (Y or T) type, Complete all as specified and directed

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410 -W (Gde E- 250) quality A complete all as specified and directed

M&L for 1.25mm thick MS, plain, black sheet in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed,holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed

Cutting & removing tree roots from any height of walls/roof including removal of trees, roots & grass vegetables upto 50mtr away from bldg & making good damaged portion of walls in CM 1:4 or PCC 1:2:4 type B-1 surface area exc 300 Sqcm & n exc 600 Sqcm complete all as specified and directed

M&L for 50 mm thick PCC 1:3:6 type C2 as in Plinth Protection/hardstanding using 40 mm stone aggregate including making joints & filling with sand bitumen mastic as per complete all as specified and directed

S&F factory made SFRC manhole / drain cover (Grade M-25) heavy duty cover slab in rectangular shape of size as required, 80 mm thick incl MS sheet 2 mm thick and 80 mm wide all around the cover inclu demolition of old manhole cover slab and inclu removal of scraps/bldg waste materials to out side from defence premises, complete all as spefcified and directed

shakti construction (BID ID -3448492)

M/S MG GROUP (BID ID -3439470)

MAA VAISHNO INDUSTRIES (BID ID -3441817)

GLIBS CONSTRUCTION (BID ID -3442373)