MPMMCC/ENGG/PANEL/2024-25/43

Amount

Supplying of following 1100 Volt grade PVC insulated sheathed FRLS XLPE Aluminum conductor armoured cables as per specification. (Make: Polycab / Grandlay / KEI / RR Kabel)

3.5C X 185 sq.mm

Supplying & laying of following 1100 Volt grade PVC insulated sheathed FRLS XLPE Copper conductor un-armoured cables as per specification. (Make: Polycab / Grandlay / KEI / RR Kabel)

1C X 150 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Above 95 sq. mm and upto 185 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.

Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required.

3½ X 185 sq. mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part Il complete with fitting and cutting, jointing etc. in the existing trench, complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

300 mm width X 50 mm depth X 1.6 mm thickness

Providing chemical earthing with drilling in soil by means of proper drilling equipments in soil by means of proper drilling (Size of earth pit bor dia not less than 150 mm) equipment as per requirment of site condition and providing earth electrode Cu bounded Steel Rod 17.2 mm dia X 3000 mm length (100 Microns) as per IEC 60364/62561 ECO safe carbon based backfill compound 50 pounds with Gun Metal Clamp and providing ECO friendly rust proof heavy duty wheather proof Polyethylene Earth Pit inspection Chamber with dimensions 400x500mm with matel cover plate after complete the earth pit work earth test report will be submite after 7 day of installation and The voltage between Neutral & Earth not to exceed 0 volts & IR value should be less than 1 ohm. The earth resistance shall be as per IS 3043 making the site clear by removing debris.

AWADH ELECTRICAL AND REPAIRING CENTER (BID ID -3187593)