Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹49.9 LAccepted-AOC BIRWAN BRIDGE UDHAMPUR J K 182104 | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182104 | 1 | Accepted-AOC L1 bidder | |
| 2 | 2₹57.1 L+₹7.2 L (14.5%)Rejected-Finance 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | JALANDHAR | PUNJAB | 144001 | 2 | Rejected-Finance Other than lowest | |
| 3 | 3₹63.7 L+₹13.8 L (27.7%)Rejected-Finance WARD NO 9 HOUSE NO 41 ARYA SAMAJ GALI UDHAMPUR 182 101 J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | 3 | Rejected-Finance Other than lowest |
Tender Value
₹54.4 L
EMD Value
₹1.1 L
Closing Date
18 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Sachin Sharma CWE
Military Engineer Services, Commander Works Engineer, Udhampur, PO - Garhi, Udhampur-182121
SPL REPAIR/RESURFACING 2.5 KM ROAD AT DEPOT PERIMETER OF FOD UNDER GE (SOUTH) UDHAMPUR
2023_MES_573648_1
CWE/U(S)-78/2022-23
Open Tender
Civil Works - Roads
Item Rate
180 days
Udhampur
AS PER TENDER
7 documents required · 7 mandatory
₹1,000
GE (South) Udhampur
₹1.1 L
Yes
6 Mar 2023
7 Jan 2023
25 Feb 2023
7 Jan 2023
18 Feb 2023
28 Jan 2023
Amount
Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exceeding 400 sqm, exceeding 50mm but not exceeding 100mm deep including removing the materials to a distance not exceeding 50 metre and stacking, complete all as specified and directed by the Engr-in-Charge.
75mm thick (Compacted thickness) WBM in two equal layers with coarse aggregates of grading 2 (63 to 40mm size) or of grading 2 (50 to 20mm size) of granite, trap or basalt spreading and compaction with 8 to 12 tonne power roller and consolidated to required gradient and camber complete all as specified and directed by the Engr-in-Charge.
Description all as per srl item No 2 Above but except material, complete all as specified and as directed by the Engr-in-Charge.
Surface excavation not exc. 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified by the Engr-in-Charge.
Removing excavated material not exc 50M and depositing where directed at a level not exc 1.5M above the starting point, complete all as specified and as directed by the Engr-in-Charge.
Rolling and consolidating formation surface with 8 to 12 tonne power rolling , including filling in soft sports, hollows and depressions etc. which occurs during rolling ( for portion coming in cutting/original ground only ) to required level gradient or camber etc. including watering before or during rolling complete all as specified.
Soling (or sub base), 150 mm thick (spread thickness), with broken boulders or quarried stone (granite/ basalt) including filling of interstices, surface formed and rolled and consolidated to required gradient and camber with power roller of capacity 8 to 12 tonne, complete all as specified and directed by Engineer-in-Charge.
Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal), complete, all as specified and as directed by the Engr-in-Charge.
Continuous brick edging, with width equal to the width of the brick, laid dry on end vertically with burnt clay bricks of sub class 'B' bricks, complete all as specified and directed.
Preparing un-surfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc., and applying evenly a priming / tack coat on un-surfaced water bound macadam surfaces with paving bitumen primer using bitumen VG-10 paving grade ( 80 -100 penetration) @ 10 Kg per Ten Square Metre with tar boiler and including Bituminous premix asphaltic semi dense concrete 40mm consolidated thickness with 5.5% paving bitumen using bitumen VG-30 paving grade ( 50 -70 penetration) binder content by weight of total mix rolled and compacted to required camber and gradient, complete, all as specified and as directed by the Engineer-in-Charge.
Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all loose dirt etc., and applying evenly a priming / tack coat on existing black top surfaces with paving bitumen primer using bitumen VG-10 paving grade ( 80 -100 penetration) @ 5 Kg per Ten Square Metre with tar boiler and including Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% paving bitumen using bitumen VG-30 paving grade ( 50 -70 penetration) binder content by weight of total mix rolled and compacted to required camber and gradient, complete, all as specified and as directed by the Engineer-in-Charge.
Premix bituminous macadam with 4% paving using bitumen VG-30 paving grade ( 50 -70 penetration) bitumen binder, laid/rolled and compacted to required gradient and camber (consolidated thickness upto maximum 75mm), complete, all as specified and as directed by the Engineer-in-Charge. Note: Repair to pot holes any depth not exc 1 sqm each depression in patch over 50mm, shall also be carried out under this item.
Note for item No. 10 to 12 : (a) Preparation of mix in hot mix plant, spreading by self propelling mechanical paver and rolling and compaction by set of rollers as specified in particular specifications shall be carried out. Hot mix plant may be installed at any distance but the contractor shall be responsible for maintaining the required temperature of mix under all conditions till it is laid and compacted. Unit rate against these items shall include for carrying out the works with deployment of these machinery for which nothing extra shall be payable and no delay in completion of work shall be acceptable on this account. (b) To achieve marshal stability of 1050 KN and all as per SSR Part-I Clause No. 20.B.4. (c) If qty of binder contents is less than the qty as specified in respective items of BOQ, it shall be adjusted at supply only rates of paving bitumen @ Rs 60.00 Per Kg and if qty of binder contents is more than the qty as specified in respective items of BOQ no adjustment shall be made.
Preparation of any type of road surfaces by scratching old spots, paints, trading oils greasy spots etc. and applying Thermo Plastic road marking paints as side, side lines of white/yellow colour of width upto 100mm conforming to Ministry of surface Transaport (MORTH) specification for the road and bridge work : 5th revision, over primer as per manufacturers instructions including glass beads (intermix) type I (most/BS6008A) and provision contained in IRC-35-1997 incl cleaning of all dirt, scales, oil, grease and foreign material etc., complete all as specified and directed by GE/Engr-in-Charge. Note : Contractor shall have to furnish the detail that quantity minimum used per square meter is 5.00 Kg/Sqm.
Cat eye of size 100 mm x 100mmx18.5mm made of ABS material two reflectors fitted in the body, weight of cat eye 130 gm approx, designed for dynamic loads, fixing in repairs, complete all as specified and as directed by Engr-in-Charge.
Dark eye solar studs RED,Amber or white of size 100 x 100 x 21, height without stump - 21mm, height with stump 55mm, stump dia 33mm, LEDs electronically operated with 4 Nos solar cell, Battery - 1600MA/1.2 volts Ni-Mh mono-crystalline 2.4v/0.3 watt, aluminium reflective frame- ploycarbonate weight of stud 360 gms fixing in repairs, complete all as specified and as directed by Engr-in-Charge.
S&F for Convex mirror of 800mm dia, made of polycorbonate material provided with 75mm dia mild steel medium weight pipe post of 108m high, duly powder coated fixed on ground with PCC 1:2:4 type B-1 of block size 60x60x60 cm, fixing in repair including earth work & removing excavated soil to a distance not exceeding 50m, complete all as specified as directed by Engr-in-Charge. Note : Cost of PCC and earth work is deemed to be included in unit cost.
75mm thick Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and directed by Engineer-in-Charge.
s s construction
M/S Inderjit Sharma and Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .