DAY TO DAY COMPLAINTS BASED MAINT OF VARIOUS B/R AND E/M RELATED WORKS OF MD/OTM ACCN AT CHH SAMBHAJINAGAR MIL STN UNDER GE (S) AHILYANAGAR

Amount

Taking down shutters of any description, area exc 1 sqm & n.exc 2 sqm each leaf and complete all as specified & as directed.

Resecuring or Easing of door shutters exc 1 sqm but n.exc 2 Sqm for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and as directed by Engr-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area n.exc 1.50 sqm each and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and as directed.

S&F Factory made solid PVC door frame of size 50x47 mm made out of 5mm PVC sheet reinforced with MS square tube, supplying and fixing opening as per specification & drawing given in SSR 2009 Part-I complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded feather edges plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

S&F in repair powder coated anodised aluminium ventilator having aluminium section weighing not less than 0.55 kg/m, including aluminium louvers, frosted 3mm thick glass, SS wire mesh, including arrangement for fixing of exhaust fan and necessary joining cleats,glazing clips,screws etc complete all as specified and as directed. Note : Shade shall be as approved by Engineer-in-Charge.

S&F aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and as directed.

S&F in repairs aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and as directed.

S&F in repairs 250 mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 100 mm long SS butt hinges, medium weight, cold rolled, ISI marked, complete all as specified and as directed.

S&F in repairs 100 mm long SS butt hinges, medium weight, cold rolled, ISI marked, complete all as specified and as directed.

S&F in repairs, 300mm size, mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.

S&F 125 mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed.

S&F in repairs 125 mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundaion box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and as directed .

S&F in repairs aluminium extruded section door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F in repairs 5 inches heavy duty Vanilla door stopper mounted with rubber tip of aluminium alloy body fixed in floor all as specified and directed.

S&F in repair magnetic catcher, Double strip (horizontal type), in cupboard/ward robe shutters including fixing wit necessary Stainless Steel screws etc. complete all as specified and as directed.

S&F in repair bevelled edge looking mirror 5.5mm thick of size 600mm x 450mm mounted on commercial plywood 6 mm thick including PVC beading all round and fixed to wooden plugs with chromium plated screws complete all as spfd and directed by Engr-in-charge.

S&F wall mounted 300mm Glass Corners with 8mm thick glass, solid brass clamps, and stainless-steel railings for ultimate strength and resistance to scratches and rust, chrome finish complete all as specified and as directed.

S&F in repairs Cabinet mirror of size 330mm x 430mm all as directed.

S&F in repairs chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F Regular Close Ball Bearing Drawer Channel (Pair), Length - 300mm, 45kg Capacity,100% Extension, for Wooden and Metal Drawers in Kitchen,Wardrobe etc complete all as specified and as directed.

S&F in repairs drapery / curtain rod with brackets and knobs at both ends made out of 25mm dia mild steel conduit having PVC powder coated pipe with wall thickness 0.63 mm bright finish colour and pattern including taking down old curtain rods complete all as specified & as directed. Note: The cost of brackets & knobs shall deemed to be included in the unit rate quoted.

S&F in repairs 25mm dia stainless curtain rod with brackets and knobs at both ends as per site requirements including taking down old curtain rods with accessories complete all as specified and as directed. Note: The cost of brackets & knobs shall deemed to be included in the unit rate quoted.

S&F in repairs, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40 mm, fixed with stainless steel wire staples to steel / wooden frame complete all as specified and as directed.

M&L for welding in repairs, n exc 2.5 cm in length, thickness of metal to be welded n. exc 6 mm complete all as specified and as directed.

S&F 3 mm thick frosted glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows including glazing pins etc. complete all as specified and as directed.

S&F 3 mm thick plain sheet glass and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows including glazing pins etc. complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Demolition of brick work, stone/boulder masonry built in cement or lime mortar including all quoins, arches, pillars,etc all as specified and as directed.

M&L for precast cement concrete block masonry with solid block of PCC (1:5:8) , exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6, complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing all as specified and as directed.

Taking up or down 25 mm bore steel tubing and connections, including cleaning for refixing all as specified and as directed.

M&L for 20 mm bore GI tubing medium grade with all new fittings and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

M&L for 25 mm bore GI tubing medium grade with all new fittings and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F 15mm diameter CPVC pipes SDR11 & plain CPVC SDR fittings laid in trenches or fixed to walls complete all as specified and as directed

S&F 20mm diameter CPVC pipes SDR11 & Plain CPVC SDR fittings laid in trenches or fixed to walls, ceilings complete all as specified and as directed

M&L for water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following :- (a) After demolition of floor and lime concrete etc. remove all loose particles along with existing water proofing treatment (any number of layers) with wire brushes and cleaning the surfaces with water. (b) Brushing cement slurry with 1.2 kg of cement per square meter duly blended with & including water proofing compound. (c) 15mm thick (Average thickness) plaster in cement mortar (1:4) mixed with water proofing compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Applying self adhesive type APP based

polymeric membrane minimum weighing not less than 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non-woven fabric (weight not less than 150 gm/sqm (e) M&L for PCC 1:7:12 for filling of sunken portion after conceling all membrane and sealing all joints to the entire with broken bats and light weight, floor area of WC/Bath exc 1.5 Sqm but not exceeding 3.00 sqm each and provide hole in the wall and fix 600 mm long 20 mm dia GI spouts light grade, PCC 1:3:6, type C1 (using 20 mm graded stone aggregates) filling complete all as satisfaction of Engineer-in-Charge. Note- The unit rate quoted shall deemed to be included for drilling of the hole RCC @ 1.00 m centre to centre, to a depth to a length of 30 mm and fixing of PVC pipes of dia 15/20 mm laid dry and grouting with cement slurry mixed with can bax 100 chemical with pressure grouting with minimm 3 Kg/Sqm complete.

S&F rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) 500 litres capacity, tripple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connections including dismatling of old water tank complete all as specified and as directed.

All as per serial item No. 42 above but 1000 ltr capacity.

S&F in repairs, PVC cover/lid for rotational mounded polythene water storage tanks any capacity including fixing with necessary device complete all as specified and as directed.

S&F in repairs, bib tap, 15mm dia cast copper alloy chromium plated, with crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs, Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-125gms). complete all as specified and as directed.

S&F in repairs, 15 mm bore pillar taps, cast copper alloy with capstan heads, fancy type and swan neck chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs, brass crominium plated wash basin mixer for mixing hot and cold water for wash hand basin, screwed down for iron pipe 15 mm bore and fixed complete all as specified and as directed.

S&F in repairs, brass crominium plated mixer for mixing hot and cold water for kitchen sink screwed down for iron pipe 15 mm bore and fixed complete all as specified and as directed.

S&F in repairs, brass crominium plated wall mixer for mixing hot and cold water and bend for connecting to shower, screwed down for iron pipe 15 mm bore and fixed complete all as specified and as directed.

S&F in repairs, stop valves/ angle valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F in repairs 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed.

S&F in repairs ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 15 mm bore iron pipe (Minimum weight 142 gms), complete all as specified and directed.

S&F in repairs ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 20 mm bore iron pipe (Minium weight 210 gms), complete all as specified and directed.

S & F in repairs stainless steel grating with square frame (grating thickness 1mm and frame thickness 1.5mm) of size 125mm (minimum) with waste hole complete all as directed.

S&F in repairs, 32/ 40 mm bore PVC flexible outlet pipes for wash basin/ sink/ urinal fixed complete all as specified and as directed.

S&F in repairs, PVC connection, 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F in repairs, PVC connection, 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in repairs, 110 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall all as specified and as directed.

S&F in repairs, 75 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall all as specified and as directed.

S&F in repairs, 110 mm dia PVC (SWR) bends of any radius complete all as specified and as directed

S&F in repairs, 75 mm dia PVC (SWR) bends with access door, of any radius complete all as specified and as directed

S&F in repairs, PVC (SWR) branch piece of 110 mm bore , provided with access door, double (double Y) equal or unequal, all as specified and as directed

S&F in repairs, PVC (SWR) branch piece of 75 mm bore ,provided with access door, double (double Y) equal or unequal, all as specified and as directed

S&F in repairs, PVC (SWR) 110 mm bore vent cowl, all as specified and as directed

M&L in repairs, 75mm dia outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement to waste pipe fixed in cement concrete type (1:2:4) type B1all as specified and as directed.

S&F in repairs, chromium plated health faucet (hand shower) with 1200 mm long flexible tube, wall mounted / hooked all as specified and as directed.

S&F in repairs, chromium plated shower rose with or without swivel joints, 125mm size, , including fixing to steel pipe or union, 15mm bore etc complete all as specified and as directed.

S&F in repairs, toilet paper holder of of brass chromium plated complete all as specified and as directed.

S&F in repairs, vitreous China, white, squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest, set in cement concrete including flush pipe and connecting to trap / flushing cistren and making good to floor complete all as specified and as directed.

S&F in repairs, vitreous china wash down water closet (pedestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

S&F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F in repairs, vitreous china wash hand basin, white flat back size 580mm x 450mm including brackets, pillar tap 15 mm bore chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed.

S&F in repairs, stainless steel sink with drain board made of 1mm thick sheet for kitchen including plugs, washers, waste pippe, cast iron cantilever brackets, connecting union to pipe, over all size 915 mmx 460 mm with bowl size 410 mm x 330 mmx 160 mm all as specified and as directed.

S&F in repairs, stainless steel sink without drain board made of 1mm thick sheet for kitchen including plugs, washers, waste pipe, cast iron cantilever brackets, connecting union to pipe, over all size 495 mmx 420 mm with bowl size 410 mm x 330 mmx 160 mm all as specified and as directed.

M&L in repairs, for vitreous China bowl urinal flat back, size of 440 x 360 x 270 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe) including urinal spreader of brass chromium plated for fixing with 15 mm dia pipe, PVC connection, 40mm PVC waste pipe & 32 mm waste coupling providing and fixing plugs, bedding urinal against wall in mortar 1:2, securing urinal to plug, with and including 60mm long screws, pointing around urinal back in cement, fixing flush pipe, complete all as specified and as directed.

M&L in repairs, for vitreous China bowl urinal Half Stall, size of 590 x 460 x 380 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe) including urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), PVC connection, 40 mm waste coupling providing and fixing plugs, bedding urinal against wall in mortar 1:2, securing urinal to plug, with and including 60mm long screws, pointing around urinal back in cement, fixing flush pipe, complete all as specified and as directed.

S&F in repairs 40mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 40mm-60 gms) complete all as specified and as directed.

S&F in repairs 32mm dia waste coupling of PTMT suitable for urinals (half or full threaded), (Minimum weight 32mm-45 gms) complete all as specified and as directed.

S&F in repairs two way bib tap, 15mm dia cast copper alloy chromium plated, with crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs stainless steel chrome finish jet spray along with fitting, fixtures complete all as specified and as directed.

S&F in repairs Plastic water closet seat and cover white colour closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

M&L for cleaning of service tank upto 500 ltrs by removing all scale, dirt, silt, mud etc, from tanks and from mouths of circulating pipes including washing of tank internally with bleaching powder after removing scale dirt mud ec from tank and removing algae outside from tank from below bottom of tank and disinfecting tank by soraying sodium hypo chlorite solution in tank writing down date of cleaning on tank by synthetic enamel paint size of alphabet/numerical shall be minimum 7 cm using stencils complete all as specified and as directed. Note:- The quoted rate shall include dismantling and refixing of water tank and float valve complete all as specified and as directed.

M&L for cleaning of service tank upto 1000 ltrs by removing all scale, dirt, silt, mud etc, from tanks and from mouths of circulating pipes including washing of tank internally with bleaching powder after removing scale dirt mud ec from tank and removing algae outside from tank from below bottom of tank and disinfecting tank by soraying sodium hypo chlorite solution in tank writing down date of cleaning on tank by synthetic enamel paint size of alphabet/numerical shall be minimum 7 cm using stencils complete all as specified and as directed. Note:- The quoted rate shall include dismantling and refixing of water tank and float valve complete all as specified and as directed.

M&L for preparation of old wood or wood based surface of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old steel or iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for complete removal of existing surfaces treatment from wall surfaces and applying minimum 1mm thick wall care putty over prepared wall surfaces including sanding of the putty surface after drying to achieve even and smooth finish for receiving painting complete all as specified and as directed.

M&L for preparation of old decorated wall surfaces and applying one coat of oil bound distemper using roller all as specified and as directed.

M&L for 10 mm thick rendering in cement mortar 1:6 on other than fair faces of brick masonry surfaces or concrete surfaces, finished even and smooth with sagol finish complete all as specified and as directed.

M&L for glazed coloured ceramic tiles of size 450x300x7mm thick on vertical surfaces of walls, colour/shade as approved by GE, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles over & including 10mm thick backing coat in cement mortar 1:3 complete all as specified & as directed.

M&L for 7-8mm thick non skid coloured ceramic tiles (square or rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc, colour/shade as approved by GE, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles over & including 15mm thick screed bed in cement mortar 1:6 complete all as specified & as directed.

Resecuring or Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs,tightening piano hinges incl misc small adjustments complete all as specified and as directed by Engr-in-charge.

Repair to aluminium door and window from existing framing and replace the glass joining cleat, glazing clips & rubber neoprene packing of glass / wiremesh and refix the glass in panel, incl reflixing the loose stile of door and window wih reqd aluminium cleats complete and refix the panel shutter with frame complete all as specified and directed.

Repair to steel window / door including necessary welding, reveting, easing, drilling and replacement of unserviceable hanging device and making them in serviceable condition complete all as specified and directed.

S&F in repairs brass spindles suitable for 15mm bore CP bib taps/ CP stop cock (short/long body), pillar taps complete all as specified and as directed.

S&F in repair PVC internal fittings of low level PVC flushing cistern with syphon, handle lever etc complete kit all as specified and directed.

S&F in repairs vitreous china semi pedestal pattern wash down water closet pan (Anglo Indian type) white including connection to drain with trap (excluding flushing cistern) and including white seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws including flush pipe etc complete all as specified and as directed.

S&F in repairs vitreous china EWC wash down water closet one piece with cistern set (snow white) with soft closing glossy seat cover complete all as specified and as directed. Make : Cat No. S1013218 of CERA or equivalent model of makes specified.

S&F in position 4.8 to 5mm thick frosted glass exc 0.5 sqm in each pane, of ordinary quality and glazing with glazing clips including necessary rubber packing to aluminium frame work complete all as specified and as directed.

S&F in position 4.8 to 5mm thick frosted glass not exc 0.5 sqm in each pane, of ordinary quality and glazing with glazing clips including necessary rubber packing to aluminium frame work complete all as specified and as directed.

M&L for repair / rectification of leakages of existing GI tubing 15 mm bore laid in trenches, floors or on wall, roof by replacing with new fittings such as unions, sockets, nipples, tees, elbows, reducers etc including threading, cutting, jointing complete all as specified and as directed.Note:Excavation and earth work shall be measured and paid separately.

S&F in repairs modular switch one way, 6 Amp, one module, 230V all as specified and directed.

S&F in repairs modular switch one way, 16 Amp, one module, 230V all as specified and directed.

S&F in repairs modular bell push, 6 Amp, one module, 230V all as specified and directed.

S&F in repairs modular switch two way, 6 Amp, one module, 230V all as specified and directed.

S&F in repairs modular socket, 6A, 3 pin combined 2 module, 230V all as specified and directed.

S&F in repairs modular socket, 6A/16A, 3 pin combined 2 module, 230V all as specified and directed.

S&F in repairs, modular fan Regulator, 120 watt , 2 module complete all as specifed and as directed.

S&F in repairs, modular cover plate frame, 2 module complete all as specifed and as directed.

S&F in repairs, modular cover plate frame, 3 module complete all as specifed and as directed.

S&F in repairs, modular cover plate frame, 4 module complete all as specifed and as directed.

S&F in repairs, modular cover plate frame, 6 module complete all as specifed and as directed.

S&F in repairs, modular cover plate frame, 8 module complete all as specifed and as directed.

S&F in repairs switch piano, flush button, 6 Amp, single pole, one way, 230 volts, white finish, all as specified & as directed.

S&F in repairs socket outlet, flush type, 5 pin, 6 Amp, multipurpose, 230 volts, single pole, one way suitable for 3 pin/2pin, 5 Amp plug top white/ivory finish all as specified & as directed.

S&F in repairs switch piano, flush button, 16 Amp, single pole, one way, 230 volts, white finish, all as specified & as directed.

S&F in repairs socket outlet, flush type, 6 pin, 16 Amp, multipurpose, 230 volts, single pole, suitable for 3 pin, 16 Amp plug top white/ivory finish all as specified & as directed.

S&F in repairs switch socket combination, multipurpose, flush type, 2 in 1 type (6 pin ) 6/16 Amps, 230V, AC. all as specified & as directed.

S&F in repairs switch socket combination, flush type, 3 pin, 6 Amp, multipurpose, 230 volts, single pole, one way, suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & as directed.

S&F in repairs lamp holder, angle/ batten type, PVC/Polycarbonate type with back plate, suitable for batten fittings all as specified & as directed.

S&F in repairs ceiling rose, surface PVC 50mm dia, 3 terminals including PVC mounting block white/ivory finish all as specified & as directed.

S&F in repairs bell push, flush type, 6 Amp, single pole, 230 volts, white finish all as specified & as directed.

S&F in repairs switch piano, flush button, 6 Amp, single pole, 2 way, 230 volts, white finish all as specified & as directed.

S&F in repairs fan regulator, step type, electronic on existing phenolic laminated sheet, 5 step, socket type, 230 volts, 120 watts, suitable for ceiling fan 1200/1400mm sweep all as specified & as directed.

S&F in repairs electronic dimmers, 150W, 250V flush type on the exiting phenolic laminated sheet etc. as reqd complete all as specified and directed.

S&F in repairs bell ding dong type, AC, 230 volts, single phase complete all as specified and directed.

S&F in replacement decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient of capacity 20 Watt , 6500 K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up with copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make : HAVELLS Cat No LHEXACP7IN1W020 or equivalent model of makes specified.

S&F in replacement decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient of capacity 10 Watt, 3000 K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up with flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make : HAVELLS Cat No LHEXACP5IN1W010 or equivalent model of makes specified. .

S&F in replecement LED light fitting 1x 9W / 1X10W bulkhead luminaires including LED light driver holder connecting up with two core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in replacement round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

S&F in repairs, bakelite sheet board of 100 mm x 100mm size, not less than 3mm thick for mounting of switch, sockets, fan regulators, etc.complete with screws and washers, etc. all as specified and as directed.

S&F in repairs, bakelite sheet board of 175 mm x 100mm size, not less than 3mm thick for mounting of switch, sockets, fan regulators, etc.complete with screws and washers, etc. all as specified and as directed.

S&F in repairs, bakelite sheet board of 200 mm x 150mm size, not less than 3mm thick for mounting of switch, sockets, fan regulators, etc.complete with screws and washers, etc. all as specified and as directed.

S&F in repairs, bakelite sheet board of 250 mm x 200mm size, not less than 3mm thick for mounting of switch, sockets, fan regulators, etc.complete with screws and washers, etc. all as specified and as directed.

S&F in repairs, PVC rectangular box of 100 mm x 100mm x 50 mm deep, for mounting of switch, sockets, fan regulators, etc.complete with screws and washers, etc. all as specified and as directed.

S&F in repairs, PVC rectangular box of 175 mm x 100mm x 50 mm deep, for mounting of switch, sockets, fan regulators, etc.complete with screws and washers, etc. all as specified and as directed.

S&F in repairs, PVC rectangular box of 200 mm x 150mm x 50 mm deep, for mounting of switch, sockets, fan regulators, etc.complete with screws and washers, etc. all as specified and as directed. Note for item Nos 132 to 138 : Cutting of board for mounting switch,sockets, fan regulators etc. shall be as per site requirement.

M&L for repairs to DBs of different type complete with necessary welding works to doors, replacement of unserviceable hinges all drop bolt and replacement of burnt copper wires complete all as specified and as directed by Engineer-in-Charge. Note:all accessories like wires,bolts,nuts are inclusive in quoted Rates.

S&F in repairs, MCB SP, AC 240 V, 6 to 32 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F in repairs, MCB SPN, AC 240 V, 40 to 63 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F in repairs, MCB TPN, AC 415 V, 40 to 100 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F in repairs, MCB TPN, AC 415 V, 16 to 32 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F in repairs, MCB TP, AC 415 V, 25 to 63 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F in repairs, sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), single pole and neutral, 240 volts, 8 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copper busbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed.

S&F in repairs, sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), single pole and neutral, 240 volts, 4 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copper busbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed.

S&F in repairs, sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), Tripple pole and neutral, 415 volts, 4 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copper busbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed.

S&F in repairs 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections of size 4 sqmm, two core complete all as specified and as directed.

S&F in repairs 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections of size 6 sqmm, two core complete all as specified and as directed.

S&F in repairs, garden light wiring with PVC insulated, sheathed cable with stranded aluminium conductor of size 2.5 sqmm, two core through PVC pipe of 15 mm size including excavation eath work complete with all accessories including cable connection from junction box to light fittings complete all as specified & as directed.

Supply and fix in replacement PVC casing caping and fixing accessories such as complete,lock nuts, saddles hook etc of adequate size. complete all as specified and directed by Engineer in charge.

Taking down, strip opening, cleaning all parts and packing of ceiling fan of any make and size and greasing ball bearing with specified quality grease etc and re-assembling the ceiling fan as a one unit , complete all as specified. Note:(a) T&P required for repair/ maintenance such as Spaners, ladder etc, shall be included in the quoted rate of this item.

Taking down, strip opening, cleaning all parts and packing of Exhaust fans of any make and size and greasing ball bearing with specified quality grease and re-assembling the Exhaust fans as a one unit, complete all as specified. Note:(a) T&P required for repair/ maintenance such as Spaners, ladder etc, shall be included in the quoted rate of this item.

Taking down, strip opening, cleaning all parts and packing of Table/cabin/Air circulating fan/ wall mounting fan of any make and size and greasing ball bearing with specified quality grease and re-assembling the Table/cabin/Air circulating fan/ wall mounting fan as a one unit and fixing Table/cabin/Air circulating fan/ wall mounting fan in position and re-commissioning the same including making electric connection complete all as specified and directed. Notes:- (a) T&P required for repair/ maintenance such as Spaners, ladder etc, shall be included in the quoted rate of this item.

Supply and fix in replacement capacitor 2.50 mfd to 4 mfd complete all as specified and as directed.

Taking down from site unserviceable ceiling fan 1200 mm sweep any make with blades,transporting to local workshop,opening,cutting out complete copper winding,cleaning with kerosene oil/diesel/terpentine oil and dried out,rewinding with new super enamelled copper wire of suitable size and guage and number of turns as recommended by the respective manufactures,varnishing and heating the winding including providing paper paper insulation (cuff/strip) replacing unserviceable providing paper insulation replacing unserviceable / missing spare parts, repacement of suitable ball bearing,2.5 mfd capacitors, painting with super enamelled heat resistance synthetic white paint and writing the MES number with black paint etc and fixing the stator in rotor properly aligned and reasembling ensuring right DOR ,Speedy and noiceless running and hanging at site in position complete all as specified and directed by Engr-in-Charge.

Taking down carefully water Geyser 25/50 ltrs capacity by unscrewiring nuts bolts, water inlet/outlet pipes from walls/foundation complete including refixing in position after carrying repairs like change of suitable geyser element,themostat,inlet outlet pipes,16 Amp plug top,replacement of burnt wire,cleaning of inner and outer tank,solving geyser leakage problems etc. including making connection to the water inlet, outlet pipe, electric connection and testing complete all as specified and directed by Engineer-in-charge.

Supply only PVC insulated and unsheathed cable 650/1100 Volts grade, single core multistranded copper conductor fire retardant cable of size 1.5 sqmm complete all as specified and directed.

Supply only PVC insulated and unsheathed cable 650/1100 Volts grade, single core multistranded copper conductor fire retardant cable of size 2.5 sqmm complete all as specified and directed.

M&L for disconnecting and taking down U/S street light fittings/gate lights & garden lights of any type/rating from pole or wall dismantling the same for necessary repair or replacment of U/S spares complete and refixing, connecting and testing the same all as specified and directed by Engineer-in-Charge. Notes:- (a) Spares/accessories required for replacement shall be measured and paid sepratley as supply only under respective items of BoQ. (b) T&P required for repair/ mantenance such as ladder, vehicle like crane, manpower etc, shall be included in the quoted rate of this item.

Supply only LED drivers compatible with industrial & outdoor LED fixtures/Sign boards as per existing make and model of for 50 Watt LED fitting

Supply only LED drivers compatible with industrial & outdoor LED fixtures/Sign boards as per existing make and model of for 60 Watt LED fitting

Supply only LED drivers compatible with industrial & outdoor LED fixtures/Sign boards as per existing make and model of for 90 Watt LED fitting

M&L for repair / rectification of leakages of existing GI tubing 25 mm bore laid in trenches, floors or on wall, roof by replacing with new fittings such as unions, sockets, nipples, tees, elbows, reducers etc including threading, cutting, jointing complete all as specified and as directed. Note: Excavation and earth work shall be measured and paid separately.

All as per serial item No. 164 here-in-before but 40 mm GI bore pipe.

All as per serial item No. 164 here-in-before but 50 mm GI bore pipe.

All as per serial item No. 164 here-in-before but 80 mm GI bore pipe.

All as per serial item No. 164 here-in-before but 100 mm GI bore pipe.

M&L for repairs / rectification of leakages of existing UPVC/CPVC pipe 15 mm bore, laid in trenches, floors or on wall, roof by replacing new fittings such as union, sockets, nipples, tees, elbows, reducers etc including threading, cutting, jointing complete all as specified and as directed. Note: Excavation and earth work shall be measured and paid separately.

All as per serial item No. 169 here-in-before but 20 mm bore pipe.

All as per serial item No. 169 here-in-before but 25 mm bore pipe.

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation, laying of pipe or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning filling in soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick including making good disturbed surfaces complete all as specified and as directed.

Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.

Taking up or down choked GI water pipes 20 mm bore and fittings including proper cleaning by internal brushing, removing chocking and refixing / relaying in place, jointing, pressure testing and washing out complete all as specified and as directed. Note :- (a) T&P required for repair/ maintenance shall be included in the quoted rate of this item. (b) Excavation required shall be measured and paid separately.

All as per serial item No. 175 here-in-before but 25 mm bore pipe.

All as per serial item No. 175 here-in-before but 40 mm bore pipe.

All as per serial item No. 175 here-in-before but 50 mm bore pipe.

M&L for GI tubing, medium grade, 20 mm bore laid in trenches / floors or fixed to wall in any length with galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc complete including dismantling/ taking out old pipes all as specified and as directed. Note :- (a) T&P required for repair/ maintenance shall be included in the quoted rate of this item. (b) Excavation required shall be measured and paid separately.

All as per serial item No. 179 here-in-before but 25 mm bore pipe.

All as per serial item No. 179 here-in-before but 40 mm bore pipe.

All as per serial item No. 179 here-in-before but 50 mm bore pipe.

S&F in repairs gun metal, globe or gate valves, 15 mm bore, ISI marked, screwed both ends suitable for GI tubing with side way operating GI lever handle complete all as specified and as directed.

All as per serial item No. 183 here-in-before but 20 mm bore

All as per serial item No. 183 here-in-before but 25 mm bore

Notes for all items :- (i) Contractor shall deploy sufficient plumber/ Carpenter/ Mason/ safaiwala/ electrician etc to attend the complaints (petty repair) on daily basis. Attendance report of the deployed skilled staff alongwith their helper will be submiited to JE/Engineer-in-Charge on daily basis. (ii) Contractor's supervisor shall report on all working days alongwith their skilled staff and printed contractor's firm name complaint slip book at 8:30 hrs at JE/ Engineer-in-Charge office and collect the complaints received from users and shall submit completion report. Constraints, if any shall be brought out on the same day by 1700 hrs. (iii) Printed complaint slip book as per format approved by Engineer-in-charge shall be provided and maintained by the contractor. (iv) For each complaint, a separate docket slip shall be prepared by the contractor/ his representative and handed over to related tradesman, etc. for attending the complaint and after satisfactorily completion of complaint, docket slip shall be submitted to concerned JE duly signed by occupant.

(v) If there is any major complaints of tilling/ Plumbing/ Joinery/ electrician for which additional time/ manpower or T&P is required then the same shall be provided by the contractor without any extra cost to the Govt. The same will be reoprted to JE/ Engineer-in-Charge for taking consent. (vi) If the complaints are not attended within 48 hrs a penalty of Rs. 300 per day shall be recovered from the amount due to the contracor. (vii) Rate quoted in above BOQ shall be deemed to incl the cost of staff/equipment, required T&P/stores and device etc alongwith sufficient skilled manpower/ labour to attend and complete the complaints to the entire satisfaction of Engineer-in Charge. (viii) Access will be given to contractor's rep for the execution and monitoring of the complaints on mobile application developed by the Dept.

M/S Tirupati Goroba Shendge (BID ID -3463093)

D V Engineers and Contractors Pvt Ltd (BID ID -3459279)

M/s S.R lahoti (BID ID -3455252)

B.R.ANAND (BID ID -3455148)

kgn associate (BID ID -3456136)

ASHWAMEDH ENGINEERS (BID ID -3463393)

M/S. M.A. Sharief engineers and contractors (BID ID -3457633)

sunil kaduba dakale (BID ID -3456910)

M/s.M G Kulkarni (BID ID -3462078)

M/s kishor M Lalwani (BID ID -3463855)