Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹85.3 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹88.0 L+₹2.7 L (3.16%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹88.9 L+₹3.6 L (4.19%)Rejected-Finance HOUSE NO 102 LANE NO 4 C ANAND NAGAR BOHRI JAMMU 180002 J K | JAMMU | JAMMU AND KASHMIR | 180002 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹91.4 L+₹6.1 L (7.13%)Rejected-Finance HOUSE NO 95 STREET NO 08 JAWAHAR COLONY NEAR LAXMI DAIRY FARIDABAD SECTOR 22 HARYANA 121005 | FARIDABAD | HARYANA | 121005 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹93.1 L+₹7.8 L (9.14%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹94.4 L
EMD Value
₹1.7 L
Closing Date
10 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Cdr, HQ 138 WE
HQ 138 Works Engineers PIN-914138 C/O 56 APO
PROVISION OF 11 KV HIGH TENSION OVERHEAD LINE AT KARU UNDER GE 860 EWS
2022_MES_556076_1
138WE/L-54/2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE 860 EWS
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE 860 EWS
₹1.7 L
Yes
16 Dec 2022
6 Oct 2022
17 Nov 2022
6 Oct 2022
10 Nov 2022
27 Oct 2022
Amount
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m depth for laying of cable/ stay assy/HT/LT poles and getting out in hard/dense soil, complete all as specified and directed by Engr-in-Charge.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 3.0 m depth for foundation of poles and getting out in hard/dense soil, complete all as specified and directed by Engr-in-Charge.
Returning filling incl spreading watering and well ramming in layers not exceeding 25cm in hard and dense soil, complete all as specified and directed by Engr-in-Charge
Removing excavated material not exceeding 50 mtrs and depositing where directed at a level n. exc 1.5mtr above the starting point, complete all as specified and directed by Engr-in-Charge
M&L Sand cushioning to underground cable complete all as specified in clause 19.75 of SSR Part - I, complete and as directed by Engr-in-Charge.
M&L for un reinforced precast concrete cable cover class LV type I, flat size 250mm x 150 mm x 40 mm, complete all as specified and directed by Engr-in-Charge.
M&L for un reinforced precast concrete cable cover class HV type I, flat size 300mm x 180 mm x 40 mm, complete all as specified and directed by Engr-in-Charge.
Material and labour for Plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation of poles including use of necessary form works for rough finished surface, complete all as specified and directed by Engr-in-Charge.
Material and labour for PCC 1:3:6 type C–2 (using 40 mm crushed graded stone aggregate as in foundation for stay and necessary form work for rough finished surface, complete all as specified and directed by Engr-in-Charge.
M&L for PCC (1:2:4) type B-1, using stone aggregate 20mm graded, with and incl necessary form work where required and fair finish to the exposed surfaces and coping, complete all as specified and directed by Engr-in-Charge.
Supply and erection in vertical position steel tubular swaged pole type 410 SP- 55 (11 mtr long ) with Mild Steel base plate of size 30cmx30cmx6 mm thick continuously welded to pole , finial taper plug ,bolts ,nuts and screws all as specified including factory painted with two coats of black bituminious paint internally throughout and externally for embedded position and two coats of aluminium paint over a coat of red oxide primer over the ground and making 30cm wide strip (total 18 Nos ) with black and yellow paint including numbering, complete all as specified and directed by Engr-in-Charge
Supply and erection in vertical position steel tubular swaged pole type 410 SP- 31 (9 mtr long ) with Mild Steel base plate of size 30cmx30cmx6 mm thick continuously welded to pole , finial taper plug ,bolts ,nuts and screws all as specified including factory painted with two coats of black bituminious paint internally throughout and externally for embedded position and two coats of aluminium paint over a coat of red oxide primer over the ground and making 30cm wide strip (total 18 Nos ) with black and yellow paint including numbering, complete all as specified and directed by Engr-in-Charge
M&L stay assembly complete using stay rod of 20 mm dia complete with accessories as shown in electric plate No. 1 of SSR – 2009 Part –I, complete all as specified and directed by Engr-in-Charge. Note : (Loop type insulator excavation , stay clamp, nuts, bolts, washers and concrete to be measured and paid separately
M&L stay assembly complete using stay rod of 16 mm dia complete with accessories as shown in electric plate No. 1 of SSR – 2009 Part –I, complete all as specified and directed by Engr-in-Charge. Note : (Loop type insulator excavation , stay clamp, nuts, bolts, washers and concrete to be measured and paid separately.
S&F, in replacement, loop type insulators, vitreous porcelain white, brown or green large size with over all dismensions 90x140mm and clearance of hole 25.5 mm, , complete all as specified and directed by Engr-in-Charge
S&F, in replacement, loop type insulators, vitreous porcelain white, brown or green large size with over all dismensions 65x90mm and clearance of hole 16 mm, , complete all as specified and directed by Engr-in-Charge
Supply and fixing aluminum conductor steel reinforced (ACSR) of any size, straining properly on insulators and binding on new HT/LT poles with and incl 02mm dia aluminium binding wire, complete all as specified and directed by Engr-in-Charge. Note : The 3% for sag, joints & jumpers shall be added in measurements. (a) 1 of 6/1x2.59mm (Weasel)
M&L Galvanised steel earth wire of 4mm dia with hooks, , streching kinks and bends , complete all as specified and directed by Engr-in-Charge.
S&F Pin Insulator, porcelain, vitreous white, brown or green insulator incl one galvanized mild steel spindle,two galvanised iron washers and one galvanised iron nut , 150 mm height , 150 mm dia for 11000 volts grade, complete all as specified and directed by Engr-in-Charge.
S&F Disc type Porcelain Insulator, vitreous brown , large size with overall dimension 145x255 mm clearence of hole 25.5 mm ,working pressure 11000 volts, complete all as specified and directed by Engr-in-Charge
S&F Pin type, porcelain, vitreous white, brown or green insulator incl one galvanized mild steel spildle, two galvanised iron washer and one galvanised iron nut, 100mm height, 65mm dia for 1100 volts grade, complete all as specified and directed by Engr-in-Charge.
S&F shackle type, porcelain, vitreous white, brown or green insulator incl one galvanized mild steel spildle, two galvanised iron washer and one galvanised iron nut, 100mm height, 115mm dia and 31x5 mm strap for 1100 volts grade, complete all as specified and directed by Engr-in-Charge.
S&F cross arms, bracing, supports clamps & back plates fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint , complete all as specified and directed by Engr-in-Charge
Material & Labour for danger notice plate of 1.6 mm thick and size not be less than 25x20 cm, made of mild steel sheet, vitreous white enamelled, with letters i.e. "DANGER 11000 VOLTS" (in English As well as in HINDI ) and conventional skull and bones signal in red colour and fixed with MS clamps, nuts, bolts and washers of suitable size, complete all as specified and directed by Engr-in-Charge
M & L Anti-Climbing device spike type fabricated out of MS bars ( round,square and flat) including nuts,bolts and washers and welding into two halves made to shape to suit the cross section of the pole, complete all as specified and directed by Engr-in-Charge.
S&F of HT lightening arrester metal oxide type (gap less) for out door use complete with all fittings and fixing arrangements transmission class discharge capacity 65 kilo amps suitable for 11000 volts including brackets, clamps, nuts, bolts ,washers and connected with GI earth wire of 4mm dia, with and incl dismentling/taking down of existing unserveciable LA, , complete all as specified and directed by Engr-in-Charge
S&F of Air break gang operated switches of any type (horizontal or vertical type), triple pole, mechnically operated, mounted on HT insulators and galvanised steel frame with operating rod of 25 mm bore medium grade GI pipe suitable for operation while standing on ground for current rating 400 Amps suitable for 11000 volt , 50 Hz with and incl 12 nos insulator and drop out fuse carrier element, with and incl dismentling/taking down of existing unserveciable GOD switch, , complete all as specified and directed by Engr-in-Charge
Supply, installing, testing , connecting and commissioning of distribution transformer outdoor type step down 11/0.433 KV (at no load) with HT 3 phase and LT 3 phase 4 wire AC , 50Hz, 500KVA level - II, copper wound with off load tap changing arrangement on HT side for a variation of secondary voltage +/- 7.5% in steps of +/- 2.5% including suitable cable entry boxes on LT side and HT bushing on primary side complete in all respects with standard accessories and fitments confirming to IS: 1180 amended upto date and test ECBC as specified and directed inlcuding the followings.(a) Earthing terminal and rating diagram plate. (b) Air release device (c) Oil Filling inlet pipe with plug. (d) Drain outlet pipe with brass gate valve with dummy plug. (e) Conservator with level gauge. (f) Silica gel with breather. (g) First oil fill up to the recommended level by the manufacturer with new oil confirming to IS 335. (h) Type of connector - Star/Delta. (j) Type of Cooling - ONAN (k) Vector Group- DYN 11 (l) Type of connecting arrangement - HT XLPE cable connection on HT side and cable connection on VCB side. (m) Provision of thermometer with pocket. (n) Oil and winding alarm and trip relay including marshal box. (o) The transformer of 315KVA full capacity shall be designed to fuction properly at high altittute of appx 3865M above sea level and outside temperature conditions between -40 degree celcius to +30 Degree celcius. (p) Factory inspection shall be carried out for transformer.
M&L for construction of covered platform for installation of transformer of including fencing and gate complete all as specified & shown on drg No CESZ/TD-1110/11 Sheet 1/1 , complete all as specified and directed by Engr-in-Charge
Supply jointing and testing outdoor type cable end termination joint (Cold shrinkable) suitable for aluminium conductor cable of size 185 Sqmm x 3 Core, 11000 Volts grade, complete all as specified and directed by Engr-in-Charge
Supply, laying, testing and commissioning of semi conducting compound conductor screened PVC bedded galvanized steel strip or wire armoured XLPE insulated heavy duty 11000 Volts grade with stranded aluminium conductor of size 185 Sqmm x 3 core confirming to IS 7098 Part-II, suitable for earthed system , complete all as specified and directed by Engr-in-Charge Note : 1. The end termination joint shall be measured and paid separately under respective items. 2. Excavation, earth work, sand cushioning and protection cover will be measured and paid for separately.
Supply, laying, testing and commissioning of LT UG cable XLPE insulated PVC sheathed galvanized steel strip armoured electric power cable with stranded aluminium conductor 1100 volts grade 500 sq mm 3.5 core confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as specified and directed by Engr-in-Charge Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. 2. Excavation, earth work, sand cushioning and brick protection will be measured and paid separately under respective items.
Supply, laying, testing and commissioning of LT UG cable XLPE insulated PVC sheathed galvanized steel strip armoured electric power cable with stranded aluminium conductor 1100 volts grade 240 sq mm 3.5 core confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as specified and directed by Engr-in-Charge Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. 2. Excavation, earth work, sand cushioning and brick protection will be measured and paid separately under respective items.
Supply, laying, testing and commissioning of LT UG cable XLPE insulated PVC sheathed galvanized steel strip armoured electric power cable with stranded aluminium conductor 1100 volts grade 120 sq mm 3.5 core confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, , complete all as specified and directed by Engr-in-Charge Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. 2. Excavation, earth work, sand cushioning and brick protection will be measured and paid separately under respective items.
All as srl item no 34 here-in-before but for cable size of 95 sqmm 3.5 core.
All as srl item no 34 here-in-before but for cable size of 70 sqmm 3.5 core.
All as srl item no 34 here-in-before but for cable size of 50 sqmm 3.5 core.
All as srl item no 34 here-in-before but for cable size of 35 sqmm 3.5 core.
All as srl item no 34 here-in-before but for cable size of 25 sqmm 4 core.
All as srl item no 34 here-in-before but for cable size of 16 sqmm 4 core.
All as srl item no 34 here-in-before but for cable size of 16 sqmm 2 core.
All as srl item no 34 here-in-before but for cable size of 10 sqmm 2 core.
S&F of LED street light luminaire of 70 Watt capacity, made of single piece pressure die-cast aluminium housing with high power LED with lens for proper light distribution luminiaries, IP 66, with toughned glass cover and incl control gear etc, with and incl making all electric connection, complete all as specified and directed by Engineer in charge.
S&F street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with and incl 02 nos MS clamp made of MS flate iron of 40 x 6 mm size with nut, bolts, washer etc with and incl two coats of aluminum paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge
S&L tubes galvanised in repair with all fittings and fixed complete to walls and ceilings or laid in floors/with pole/trenches "Light grade" 100 mm dia for the protection of the U/G cable, complete all as specified and directed by Engr-in-Charge
M&L earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 5 of SSR 2009 Part-I and connecting to MCBDB’s earth test point all as specified or indicated including testing on completion, complete all as specified and directed by Engr-in-Charge .
M&L earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the galvanised iron strip 32×6mm by means of bolts, nuts , check nuts and washers of galvanized iron and galvanised iron strip protected by provision of GI light grade pipe 40 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 5 of SSR 2009 Part-I and connecting to MCBDB’s earth test point all as specified or indicated including testing on completion, complete all as specified and directed by Engr-in-Charge.
M & L Earth Continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 32 x 6 mm galvanised iron strip, complete all as specified and directed by Engr-in-Charge.
M & L Earth Continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm galvanised iron or steel wire, complete all as specified and directed by Engr-in-Charge.
S&F Distribution Board, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed, complete all as specified and directed by Engr-in-Charge. Note: MCB's shall be measured as paid separately.
S&F of MCB, B Curve type, 10 kA, 40 to 63 Amp, TPN with over load and short circuit protection, complete all as specified and directed by Engr-in-Charge.
S&F of MCB, B Curve type, 10 kA, 20 to 40 Amp, SP with over load and short circuit protection, complete all as specified and directed by Engr-in-Charge.
S&F of MCB, B Curve type, 10 kA, 40 to 63 Amp, SP with over load and short circuit protection, complete all as specified and directed by Engr-in-Charge.
S&F MCB, B Curve type, 10 kA, 6 to 40 Amp, Single Pole with over load and short circuit protection, complete all as specified and directed by Engr-in-Charge.
M/S MALIK CHAND SIRI RAM
SUMEET TRADING CORPORATION
RND ENGINEERS & CONTRACTORS
Rajindera Enterprises
M/S HIGHLAND ENGINEERING
Intrernational Engineers
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .