81446 REPAIRS TO STEEL FURNITURE AT INS PARUNDU UNDER GE TIRUNELVELI

Amount

SCH 'A' PART -I STEEL FURNITURE

BED HARD STEEL (FD/E6/MAP/08 (R))

Removing of Broken plywood Top and supply and fix new plywood 12 mm thick commercial face with BWR grade (water proofing, IS 303) according to the size and shape as per drawing.

Preparation of old painted steel surface of bed hard steel and spray painting with one coat of synthetic enamel paint all as directed.

Supply and fix new PVC toes (Set of 04 Nos) to the legs of bed hard steel.

CHARPOY GI PIPE WITH PLY TOP , IP (FD-220)

Removing existing newar from Galvanized iron pipe Charpoy and supply & fix 12mm thick plywood of size 2.0 Mtr x 0.91 Mtr. The edges of plywood shall be fixed with teak wood beading all around and plywood shall be fixed with 75 mm long mild steel round headed bolt and nut with washers 10 Nos Including providing 03 Nos of mild steel flat iron stiffeners made out of 40 x 3mm of length not less than 0.91mm each and 04 Nos of mild steel flat iron stiffeners made out of 40 x 3 mm of length 0.30 mm in all the four corners and welded to GI pipe frame and painting the stiffener with 02 coats of synthetic enamel black paint over a coat of red oxide primer complete all as specified and directed by Engineer -in-Charge.

CHAIR CB STEEL WITH ARM (FD-75(M)

Removing the existing u/s wooden seat frame and replace with new seat frame made out of 1st class hard wood 40 x 25 mm (TS) duly drilled and painted with two coats of Synthetic enamel paint black color. The frames are to be fixed to the tubular conduit frame, using steel screw and including provision of 04 Nos PVC shoes of approved quality.

Removing the existing u/s wooden back frame and supply and fix new back frame made out of 1st class hard wood 40 x 25 mm (TS) duly drilled and painted with two coats of Synthetic enamel paint black color. The frames are to be fixed to the tubular conduit frame, using steel screw and including provision of 02 Nos PVC caps at top end of MS pipe frame of approved quality.

Removing the existing u/s broken arm rest wooden of chair, supply and fix new well seasoned 1st class hard wood arm rest of size 400 x 50x20mm made to shape and painted with two coats of synthetic enamel paint , fixed with steel screws from the bottom of the tubular frame all as specified and shown in drg.

Removing the old rusted flat iron support at bottom and back of seat and replacing with new flat iron 20x3mm , 500mm long 02 Nos each at bottom and back having machine drilled hole at ends including inserting MS screws of 30mm including fixing of Flat iron support to the steel frame by welding as shown in drg .

Preparation of old painted steel surface of chair CB steel with arm and applying one coat of olive green synthetic enamel paint all as directed

CHAIR CB STEEL WITH OUT ARM (FD-75 (M, FD-386)

Removing the existing U/S wooden seat frame and replace with new seat frame made out 1st Class hard wood 40 x 25 mm (TS) duly drilled and painted with two coats of Synthetic enamel paint black color. The frames are to be fixed to the tubular conduit frame, using steel screws and inclduing provision of 04 Nos PVC shoes of approved quality.

Removing the existing u/s wooden back frame and supply and fix new back frame made out of 1st class hard wood 40 x 25 mm (TS) duly drilled and painted with two coats of Synthetic enamel paint black color. The frames are to be fixed to the tubular conduit frame, using steel screws and including provision of 02 Nos PVC caps to top end of MS pipe frame of approved quality.

Removing the old rusted flat iron support at bottom/back of seat and replacing of with new Flat iron 20x 3mm, 400 mm long, 02 nos each at bottom and having machine drilled hole for inserting MS screws of 30mm and fixing the same to the steel frame , by welding as shown in drg.

Preparation of old painted steel surface of chair CB steel without arm and applying one coat of olive green synthetic enamel paint including removing the rust and carryout the welding to broken portion of steel frame chairs .

TABLE DINING OR(FD-165)

Removing existing unserviceable table top from table dining ORs and replacing with new 19 mm particle board of BWR grade having dimensions 1900 x 685 mm all as specified and directed.

Removing existing broken MS Squared tube 25 mm from the legs of table dining and replace with one of required length and welding to dining table where ever required all as shown in drg and as directed by Engineer –in-Charge and applying two coats of synthetic enamel paint black colour over a coat of red oxide primer.

Supply and fix new hard rubber toes (Set of 04 Nos) to the legs of table dining ORs .

CHAIR VERANDAH(FD-359,FD-19,FD-256 & FD-259)

Removing the old U/S cane plastic and removing the old paint /rust from the tubular frames and painting with two coats of synthetic enamel paint .

Recanning the chair verandah with new 4mm wide cane plastic of matt pattern ( as per trade pattern) to seat and back

Repairs to Chair verandah by denting /welding etc to fix suitably all as directed and shown on drg.

Supply and fix new hard rubber toes (Set of 04 Nos) to the legs of chair verandah .

TABLE OFFICE CLERK STEEL(FD-250)

Removing the existing worn out U/S table top, replacing with 18mm thick particle board BWR grade of size 1200x600mm all as directed and shown on drg.

Removing the existing U/S locks and supply and fix new lock 50mm size with duplicate key of Godrej/equivalent to Godrej make suitable for drawers .

Preparation of old painted steel surface and applying one coat of synthetic enamel paint internally and externally for table office clk steel .

Repair of steel table drawers by denting /welding etc to fix suitably in the channels all as directed by Engr-in-Charge.

Supply and fix new hard rubber toes (Set of 04 Nos) to the legs of table office clk steel .

TABLE OFFICE OFFICER (FD-1003)

Removing the existing worn out U/S table top replacing with 18 mm thick particle board BWR grade of size 1350x750mm all as directed and shown on drg.

Removing the existing U/S locks and supply and fix new lock 50mm size with duplicate key of Godrej/equivalent to Godrej make suitable for drawers .

Preparation of old painted steel surface and applying one coat of synthetic enamel paint internally and externally for table office officer steel .

Repair of steel table drawers by denting /welding etc to fix suitably in the channels all as directed by Engr-in-Charge.

Supply and fix new hard rubber toes (Set of 04 Nos) to the legs of table office officer .

ALMIRAH LARGE/MED WITH SHELVES(FD-67M).

Removing the existing U/S lock, supply and fix new lock (ISI Marked) along with suitable three way lock of 55/65mm with brass lever with two key chromium plated for Almirah large with shelves steel .

All as per item No 10.01 above , but for almirah medium with shelves steel .

Removing the existing U/S handle, supply & fix new steel chromium plated handle 125mm long to the steel almirah large/med

Preparation of old painted steel surface of Almirah large with shelves and spray painting with one coat of synthetic enamel paint olive green shade on both internal and external surfaces.

All as per item No ser No 10.04 but for almirah medium with shelves steel.

CHAIR EXECUTIVE REVOLVING(Make-Damro)

Removing of unserviceable seat of existing TP chair, S & F best quality moulded seat cushion (make- Damro)of suitable size & material to existing chair as per existing shape and size all as directed by GE/BSO including dismantling

All as per item No 11.01 above but moulded back cushion (make- Damro)

Removing of unserviceable base of existing TP chair, M& L for provision of new base (make- Damro) of best quality (ISI Marked) as per existing shape and size all as directed by Engr-in-Charge including dismantling.

Removing of unserviceable cloth of existing TP chair, M& L for provision of new tapestry cloth as in seat / back cushion covers as per existing shape / size all as directed by Engr-in-Charge incuding dismantling (Cost of tapestry cloth provided shall not be less than 275/- RM)

Removing of unserviceable arms of existing TP chair, Supply and fix new arms (make- Damro) (Set of 02 Nos) in each chair of 1st quality as per existing shape and for chair executive revolving and as directed by Engr-in-Charge including dismantling

Removing of unserviceable Hydravilc systems of existing TP chair, Supply and fix new Hydravlic systems (make- Damro) best quality (ISI Marked) as per existing chair executive revolving low back / high back and size as directed by Engr-in-Charge including dismantling.

CHAIR EXECUTIVE REVOLVING(Make-Godrej)

Removing of unserviceable seat of existing TP chair, S & F best quality moulded seat cushions (make- Godrej)of suitable size & material to existing chair as per existing shape and size all as directed by GE/BSO including dismantling.

All as per items No 12.01 above but moulded back cushion (make- Godrej)

Removing of unserviceable base of existing TP chair, M& L for provision of new base (make- Godrej) of best quality (ISI Marked) as per existing shape and size all as directed by Engr-in-Charge and including dismantling.

Removing of unserviceable cloth of existing TP chair, M& L for provision of new tapestry cloth as in seat / back cushion covers as per existing shape / size all as directed by Engr-in-Charge including dismantling (Cost of tapestry cloth provided shall not be less than Rs 275/- per RM)

Removing of unserviceable arms of existing TP chair, Supply and fix new arms (make- Godrej) (Set of 02 Nos) in each chair of 1st quality as per existing shape for chair executive revolving all as directed by Engr-in-Charge including dismantling.

Removing of unserviceable Hydraulic system of existing TP chair, Supply and fix new Hydraulic system (make- Godrej) best quality (ISI Marked) as per existing chair executive revolving low back / high back and size as directed by Engr-in-Charge including dismantling.

CHAIR VISITOR (Make Godrej)

Removing of unserviceable seat of existing TP chair, Supply and fix new seat (make : Godrej)as per existing shape and size all as directed by GE/BSO including dismantling.

All as per item No 13.01 above but moulded back cushions (make : Godrej)

Removing of unserviceable arms of existing TP chair, Supply and fix new arms (Set of 02 Nos)(make : Godrej) in each chair of 1st quality as per existing shape for chair all as directed by Engr-in-Charge including dismantling

Removing of unserviceable frame of existing TP chair, Supply and fix new frame (make : Godrej) for chair visitor

CHAIR COMPUTER (Make Godrej)

Removing of unserviceable seat cushions of existing TP chair, S & F best quality moulded seat cushion (make : Godrej)duly covered with new tapestry cloth as per existing shape and size all as directed by GE/BSO including dismantling.

All as per item No 14.01 above but moulded back cushion (make : Godrej)

Removing of unserviceable base of existing TP chair, M & L for provision of new base (make : Godrej) of best quality (ISI Marked) as per existing shape and size all as directed by Engr-in-Charge including dismantling.

Removing of unserviceable arms of existing TP chair, Supply and fix new arms (Set of 02 Nos) (make : Godrej) in each chair of 1st quality as per existing shape of chair and as directed by Engr-in-Charge including dismantling.

Removing of unserviceable Hydraulic system of existing TP chair Supply and fix new Hydraulic system (make : Godrej) best quality (ISI Marked) as per existing chair computer and size as directed by Engr-in-Charge including dismantling.

CHAIR COMPUTER (FD/E6/MAP/01)

S & F best quality moulded seat cushions duly covered with new tapestry cloth as per existing shape and size all as directed by BSO including dismantling and removing the old unserviceable seat cushion.

All as per item No 15.01 above but moulded back cushion

M & L for provision of new base of best quality (ISI Marked) as per existing shape and size all as directed by Engr-in-Charge including dismantling & removing the old unserviceable base.

Supply and fix new PU arms (Set of 02 Nos) in each chair of 1st quality as per existing shape for chair and as directed by Engr-in-Charge including dismantling and removing the old unserviceable arms

Supply and fix new Hydraulic system best quality (ISI Marked) as per existing of chair computer and size as directed by Engr-in-Charge including dismantling & removing the old unserviceable material

LOCKER BEDSIDE STEEL (FD-1029/257)

Removing the existing U/S Piano hinges, supply & fix new Piano hinges steel 30 x 780mm long with required screws to the locker bedside steel.

Removing the existing U/S handle, supply & fix new Aluminium 'D' handle 100mm long with screw & washer to the locker bedside steel..

Removing the existing U/S Hasp & Staple, supply & fix new Aluminium Hasp & Staple 75mm with screw to the locker bedside steel.

Removing the existing U/S Rail, supply & fix new Aluminium rail 18mm dia 300mm long with both socket fixed with screw to the locker bedside steel.

Preparation of old painted steel surface of locker bed side steel with shelves and spray painting with one coat of synthetic enamel paint olive green shade on both internal and external surfaces.

CABINET FILING STEEL :-(FD-397) Preparation of old painted steel surface of Cabinet filing steel with drawers and spray painting with one coat of synthetic enamel paint olive green shade on both internal and external surfaces.

RACK ADJUSTABLE STEEL 6 TIER (FD-1038):- Preparation of old painted steel surface of rack adjustabe steel with shelves and spray painting with one coat of synthetic enamel paint olive green shade on both internal and external surfaces.

RACK SIDE WITH TRAY STEEL (FD-1023):- Preparation of old painted steel surface of rack side with tray steel spray painting with one coat of synthetic enamel paint olive green shade on both internal and external surfaces.

STOOL STEEL (FD-409):- Preparation of old painted steel surface of Stool steel and painting with one coat of synthetic enamel paint olive green shade on both internal and external surfaces.

CHAIR EASY WITH CUSHION STEEL (FD-358)

Removal of old unserviceable seat & back cushion of chair easy with cushion steel and providing new seat and back cushion of 40 density foam 100mm thick covered with long cloth and shall be tapestry cover of quality not less than Rs. 380 per mtr as specified in drg and approved by GE/BSO

Preparation of old painted steel surface of Chair easy with cushion steel and painting with one coat of synthetic enamel paint olive green shade on both internal and external surfaces.

TABLE DINING ORS ALUMINIUM TOP (FD-165)

Removing existing unserviceable table top from table dining ORs and replacing with new 19 mm particle board of BWR grade having dimensions 1900 x 685 mm all as specified and directed.

Preparation of old painted steel surface and applying one coat of synthetic enamel paint internally and externally for Table dining ORs.

Supply and fix new hard rubber toes (Set of 04 Nos) to the legs of Table dining ORs .

BOOK CASE STEEL (FD-1028)

Removing the existing U/S lock and supply and fix new lock with duplicate key of Godrej/equivalent to Godrej make suitable for book case steel .

Preparation of old painted steel surface and applying one coat of synthetic enamel paint internally and externally for Book case steel .

Removing the existing U/S glass door and supply and fix new glass door all as directed and shown on drg.

Repair of Book case steel by denting /welding etc to fix suitably in the channels all as directed by Engr-in-Charge.

SARGAM ENTERPRISES (BID ID -3466821)

SHANMUGA TRADERS (BID ID -3458134)

N N J ENTERPRISES (BID ID -3461961)