Construction of 33kv Underground Line from 220kv Sub- Station Scetoe-18 to 33/11kv Sub- Station (ESS-01) Scetor-16 yea

Supply & erection of Steel tubular pole with 1/6 over all length of pole grouted with cement concrete in 1:3:6 (1 cement : 3 coarse sand : 6 stone ballast) including plinthing of pole 30 cm above the ground level, plastering of plinth including excavation back filling etc. The rates includes all materials labour & T&P. etc. required for proper completion of work as per direction of E/I. 410 SP-62, 12mtr. (Approx. wt. 264kg.) YEIDA SOR-24

S/F of cross arm made of 100X50X6 mm M.S. channel 2.5 mtr. long on poles with packing, piece, M.S. clamp, Nut bolts etc. complete in all respect, as directed by Engineer in charge YEIDA SOR-30

Painting of the electric pole with two coat of Al-paint over red oxide primer Complete in all respect, as directed by Engineer in charge PWD 2018 PS No-634

Supply & fixing of MS rod for earthing with 2.5 m long, solid, 20 mm dia hot dipped galvanised MS rod buried till the top reaches 1.7 mts. Below the GL complete with bolts & nuts & GI earth wire 7/14. Complete in all respects as per direction of the Engineer-in-charge. YEIDA SOR-52

S/F of G.I Pipe 150MM dia "B"class Zindal/tata make including required material T&P etc. Complete in all respect, as directed by Engineer in charge. as per the directions of the Engineer-in-charge. YEIDA SOR-65

S/L of 200mm dia. H.D.P.E pipe for drawing of power cable across the road by drilling of 220mm dia. at 1mtr. Below the road level thereby doing the work of providing H.D.P.E pipe by Trenchless method PE-63/PN-6. Complete in all respects as per direction of the Engineer-in-charge. YEIDA SOR-54.

Supply, delivery, laying, testing & commissioning of 33KV (E) XLPE cable having compact circular stranded aluminium conductor The conductor should have screening of extruded semi conducting compound, cross linked polythylane (XLPE), insulation screening of the extruded semin conducting compound followed by copper tape, cores laid up, taped PVC inner sheath, single layer of steel strip armouring, overall PVC outer sheath conforming to IS: 7098 (Part-amendments) for following mentioned sizes. It should be operational at 33 KV, 50 Hz. AC system in ground at a depth of 1200 mm below ground level over a cushion of 75 mm thick sand alround and protected with bricks on sides and at the top surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the E/I with Complete in all respect.

The price are inclusive of all earth work such as digging, back filling, supply & spreading of good earth all around the cable, supply & providing cable identification markers. The installation should be complete in all respects and as per requirement of the job as per direction of Engineer-in-charge. Make- CCI, Gloster, Asian, Universal, Nicco, ICL, Diamond, Havells & KEI YEIDA SOR-3 3CX400 Sq.mm.

Supply, Delivery, Installation, Testing & Commissioning of 33KV, following type cable termination kit complete in all respect as required for proper completion of work As per direction of Engineer-in-charge. (Make Raychem, CCI, Frontec) YEIDA SOR-9 3CX400 Sq.mm Indoor type

Supply, Delivery, Installation, Testing & Commissioning of 33KV, following type cable termination kit complete in all respect as required for proper completion of work As per direction of Engineer-in-charge. (Make Raychem, CCI, Frontec) YEIDA SOR-9 3CX400 Sq.mm Outdoor type

Supply, Installation, Testing & Commissioning of Straight through cable jointing kit for 33KV XLPE armoured cable jointing. Complete in all respects as required for proper completion of work as per direction of Engineer-in-charge.(Make Raychem, CCI, Frontec) YEIDA SOR-8 3CX400 Sq.mm.

Supply & fixing of Cable route marker including Painting & Writing Complete in all respects as per direction of the Engineer-in-charge. YEIDA SOR-55.

Sagging, tensioning, jointing and bending of ACSR ‘DOG CONDUCTOR' confirming to I.S. specification including cost of aluminium wire and jointing sleeve required. The rates includes cost of material, labour, T&P etc. required for proper completion of work as per direction of E/I. PS-627

S/E of overhead line with G.I. wire No. 8 to 4 SWG including binding etc. complete in all respect. PS-628

S/F of 0.40 mtr. long top channel for pin made of 125X65X6 mm M.S. channel with M.S. clamp packing box nut bolt etc. complete in all respect. Analysis of rate-

S/F of cross arm made of 125X65X6 mm M.S. channel 1.63 mtr. long with M.S. clamp packing piece Nut bolts etc. complete in all respect. Analysis of rate

S/F of 33 KV Polymer pin insulator with pin on poles or any where specified including bolts to fasten on pole cap/cross arm with the poles. as per direction of E/I (Jaishree, BHEL,RR, Hindustan, Yamuna,AD, make) Analysis of rate-

S/E of stay set at least 3.5 mtr away from the pole complete with galvanized 19mm dia x 1.800 mtr long stay rod. 30cmx30cm x 6.3mm anchor plate thimble stay clamps, stay insulator 19mmx600mm double screw tightener. 7/4.00 mm G.I. stay wire etc. in1:3:6 cement concrete in all respect. P.S. 630.

S/E of ‘D’ clamps 50x6MM flat iron on steel tubular pole/steel rail pole with bolts, nuts etc. complete in all respect including with aluminium paint. (PS-623)

Please Enable Macros to View BoQ information