Tiruppur City Municipal Corporation DConstruction of Generator Bed and Maintenance and Repairer work for Existing Generator at Avinashi Nagar in Zone 02

Amount

Supply and fixing of 25 KVA Genset Display Control Panel can essentially the user interface. treill allow operator's to Control the Genset as well as Chock, on System diagnotics, Ovel all function and Current Status ga Genset.

Supply and fixing 25 KVA Autoroatic Voltage Regulater to roguta the in put voltage entering Genset.

SERVO Engine Oil 12 lit.

Genset Diesel Filter & Genset Oil Filter.

12.6 Volt to 13 Volt Exide Battery , Battery Leg & Copper Wire.

63A 4 Pole Change Over Switch 3 Phase.

1M Copper Earth Rod Set Including Lignite , Salt & Sand.

No 8 Copper Wire 3Kg.

1" X 2mm Wireing Pipe.

1" Wireing Bend + Clamp 15 Set & Bolt Net Washer.

35Sq mm x 4 Core UG Copper Cable 15M

63A Fuse Carrier.

Genset Transporting Loading & Unloading Gran Hire Charge , Van Hire Charge & Labour.

Genset Alternate Full Service , Spares & Labour Charge.

Self Motour , Pendex , Novol , Coil Changing , Bush & Labour Charge.

25KV Genset Liner Pisten Ring Set.

Head Gaskit Water Pump & Oip Pump Service.

Fan Injector , Fuel Pump Main Bearing Woek & Spares.

Genset Full Service Work Labour Charge.

Avinashiappa Nagar Full Wiring Labour Charge.

Earthwork excavation for foundation in all soils and sub soils except in hard rock requiring blasting and depositing on bank with initial lead of 10m and initial lift of 2m inclusive of shoring, shuttering, bailing out water wherever necessary, refilling the foundation with excavated earth other than sandy soil in layers of not more than 150mm thick layers well rammed and depositing the surplus earth within the compound in place shown by the departmental officers and clearing and levelling the site etc,. complete.

Plain Cement concrete 1:4:8 [one cement, four M-sand and eight course aggregates] using 40mm size Hard Broken/Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification.

Brick work In CM 1:5 mix using best Second Class Table Moulded Chamber Burnt Bricks 9"x4½"x3" having 350 kg/cm² compressive strength and 15% or less water absorbent in the period of 24hours immersement and confirming to ISI specifications including finishing, curing etc., complete complying with standard specification.

Plastering with cement mortar 1:4 mix (one cement four P-sand), 12mm thick in all floors using clean screened M-Sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification.

Supplying and erecting centering including necessary supports for the plane surfaces such as Drainage & Culvert Retaining walls etc., using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding supported by casurina props of 10cm to 13cm dia spaced at suitable intervals etc., complete complying with standard specification.

Supplying, fabricating and placing in position of Steel Reinforcement using Mild Steel or Ribbed Tor steel bars for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete complying with standard specification.

Reinforced cement concrete 1:1½:3 [one cement, one and half M-Sand and three course aggregates] using 20mm size Hard Broken/Machine crushed Granite Stone Jelly for all RCC items of works excluding centering, shuttering and cost of reinforcement, including curing, fixing fan clamp and fixtures if necessary etc., complete complying with standard specification.

Supply and delivery of Heavy Plastic Chair With Transporting Charger extra.. (Quotation)

Add GST @ 18%

KIRUTHIGA CONSTRUCTIONS (BID ID -1518137)