Signal and Telecommunication work in connection with requirement of modifications in circuit for removing operational constraints at Pune GIT Station of Pune Division.

Item- 1 Part-I : Supply Portion (SOR Items)

S No. Item Description of Item Unit Qty Rate Amount

1 1 Supply of PVC Indoor Cable 1x60x0.6mm dia Kilometre 0.50 345927.52 172963.76

Colour coding of insulation of inner core shall

be in six colour viz Blue, Red, Grey, Green,

Brown & Black conforming to IRS 76/89

(Amd.3) or latest. (Inspection by Consignee)

2 2 Supply of PVC Indoor Cable 1x40x0.6mm dia Kilometre 0.50 226936.58 113468.29

Colour coding of insulation of inner core shall

be in eight colour viz Blue, Red, Grey, Green,

Brown, Black, Yellow & White conforming to

IRS 76/89 or latest. (Inspection by

PUNE DIVISION-S AND T/CENTRAL RLY

3 3 Supply of Indoor Jumper Wire of various Kilometre 5.00 9745.11 48725.55

colour as per Railways standard practice of

type ATC 1 x 0.6 mm dia.conforming to IRS

76/89 (Amd.3) or latest. (Inspection by

4 4 Supply of Indoor Jumper Wire ATC 1 x 1 mm Kilometre 0.20 15088.84 3017.77

dia. conforming to IRS 76/89 (Amd.3) or

latest. (Inspection by Consignee)

5 5 Supply of wire 16/0.2 (Blue, Red, Grey, Kilometre 1.00 7415.17 7415.17

yellow, Brown, Black, White as per site

engineer instruction) finolex/polycab/delton

make. IRS S-76/89 (Amd.3), BS: 4808 Part-2.

Wire to be procured from RDSO approved

vender. (Inspection by Consignee)

6 6 Supply of low maintenance Lead Acid Numbers 15.00 2411.43 36171.45

Secondary Cells 2V 80 AH as per spec. IRS

88/2004 with latest amendments. (Inspection

7 7 Supply of Rubber Mat 5mm thick for use in Kg 50.00 149.03 7451.50

signalling installation. (Inspection by

8 8 Relay base plate complete with amphanols, Numbers 10.00 717.40 7174.00

code pins, fixing screws etc.suitable for Metal

to Metal K-50 mini groups/ECRs of Siemens

Make or functional equivalent of other

makes. Note : Relay base plates, are to be

procured from Relay manufacturer(OEM).

Manufacturer's Certificate for procurement

and guarantee in this regard should be

furnished. The payment to be released only

after Manufacturer's Certificate is submitted.

(Inspection by Consignee)

9 9 Supply of Shunt Signal Group Siemens make Numbers 2.00 66131.03 132262.06

[No. A-RT-RG-A065] or functional equivalent

without base plates (suitable for LED Signal).

(Inspection by RDSO)

10 10 Supply of Route Group Siemens Make ( Numbers 2.00 76359.35 152718.70

No.RSSK 31/0002) or functional equivalent

without base plates. (Inspection by RDSO)

11 11 Supply of Time Element Relay (Clock work Numbers 5.00 8920.58 44602.90

type) AG timer Siemens Make (No RSSK

30/0052) or GIC make or functional

equivalent. (Inspection by Consignee)

12 12 Supply of Plug In type Relay Metal to Metal Numbers 10.00 7021.16 70211.60

t y p e neutral relay mini groups (Non AC

I m m u n i s e d ) Siemens make (No. RSSK

30/0011) (Ref. IRS:S46/74 with Amd. 1 &

firms specification) or functional equivalent

without base plates.Contact configuration

5F/3B or 6F/2B or 4F/4B to be specified by

Engineer incharge. (Inspection by RDSO)

13 13 Supply of Plug In type Relay Metal to Metal Numbers 10.00 8538.67 85386.70

t y p e neutral relay mini groups (AC

Immunised-1) Siemens make (No. RSSK

30/0078-1) (Ref. IRS:S46/74 with Amd. 1 &

firms specification).or functional equivalent

without base plates.Contact configuration

5F/3B or 6F/2B or 4F/4B to be specified by

Engineer incharge. (Inspection by RDSO)

14 14 Supply of Plug In type Relay Interlocked Numbers 10.00 8016.55 80165.50

Siemens make (No. RSSK 30/0012) or

functional equivalant (Ref. IRS:S46/74 with

Amd. 1 & firms specification). Contact

cofiguration 4F/4B. (Inspection by RDSO)

PUNE DIVISION-S AND T/CENTRAL RLY

15 15 Supply of QNA1 AC immunised relay, 8F-8B, Numbers 5.00 4432.13 22160.65

24 VDC along with plug board, retaining clip

and connectors confirming to BRS : 931A,

IRS:S60, IRS:S34 & IRS:S23 (Inspection by

16 16 Supply of QSPA1 relay, 24VDC, slow to pick Numbers 5.00 5079.38 25396.90

up, 8F-4B, along with plug board, retaining

clip and connectors conforming to BRS:933A,

IRS : S60, IRS:S34 & IRS:S23 (Inspection by

17 17 Supply of QTA2 AC immunised track relay, 9 Numbers 5.00 4440.73 22203.65

Ohm, 2F.1B, along with plug board, retaining

clip and connectors conforming to BRS:939A,

966 & Appendix F2, IRS:S34 & IRS:S23

(Inspection by RDSO)

18 18 Supply of QBAT track Relay, AC immunised, Numbers 5.00 7597.66 37988.30

2F-2B contacts, 9 ohms. complete with plug

board, retaining clip & connectors as per

RDSO / SPN/84 Ver 2.0 or latest. (Inspection

19 19 Supply of Domino units with cover plate as Numbers 10.00 1719.95 17199.50

per approved panel diagram, each of size 54

x 34mm completely wired up similar to

Siemens make. Each domino units should

have all the 15 contact terminals wired up.

(Inspection by Consignee)

20 20 Supply of INDICATIVE TYPE OF FUSE INSERTS. Numbers 50.00 91.95 4597.50

IRS S:78-92 (a) With holder 1.6 A (System,

Rapid or Malnad make). (Inspection by

21 21 Supply of INDICATIVE TYPE OF FUSE INSERTS. Numbers 50.00 88.80 4440.00

IRS S:78-92 (b) With holder 0.6 A (System,

Rapid or Malnad make). (Inspection by

22 22 Supply of INDICATIVE TYPE OF FUSE INSERTS. Numbers 50.00 311.32 15566.00

IRS S:78-92 (c) With holder 6 A/10A ( D-Type

Bharat Linder, L&T or HEVELLS Make).

(Inspection by Consignee)

23 23 Supply of INDICATIVE TYPE OF FUSE INSERTS. Numbers 50.00 26.48 1324.00

IRS S:78-92 (d) Without holder 1.6 A (System,

Rapid or Malnad Make). (Inspection by

24 24 Supply of INDICATIVE TYPE OF FUSE INSERTS. Numbers 50.00 26.48 1324.00

IRS S:78-92 (e) Without holder 0.6 A (System,

Rapid or Malnad Make). (Inspection by

25 25 Supply of INDICATIVE TYPE OF FUSE INSERTS. Numbers 50.00 110.11 5505.50

IRS S:78-92 (f) Without holder 6A/10A (D-

type Bharat Linder, L&T or HEVELLS Make).

(Inspection by Consignee)

26 26 Resin cored wire as per specification No. Kg 50.00 1441.09 72054.50

IS:1921-1975 with Alloying element

percentage as 63% SN (Tin) and / 37% Pb

(Lead) with percentage of various impurities

not exceeding the values Sb (Antimony) 0.2%

maximum , Cu (Copper) 0.1% maximum, As

(Arsenic) 0.05% maximum, Fe (Iron) 0.02%

maximum & other impurities mainly Al, Zn &

Cd shall be limited. The flux shall be free

from corrosive action as per clause 5.2 & flux

percentage may be used as per requirement.

(Inspection by Consignee)

27 27 Lacing thread rolls, black, wax coated (100 Numbers 100.00 76.11 7611.00

mtrs). (Inspection by Consignee)

28 28 Supply of Shunt Signal Post with Base (GI Numbers 2.00 3119.98 6239.96

Pipe of 80 mm Dia of min. 1 meter length.).

(Inspection by Consignee)

PUNE DIVISION-S AND T/CENTRAL RLY

29 29 Supply of Cast iron Shunt signal surface base Numbers 2.00 2383.65 4767.30

80 mm as per spec No.IRS S 10 and Drg

No.2011/M with latest amendments, as per

RDSO Drg No. SA-23156/Drg.No.RST/11413

as per extent C.Rly practice (Inspection by

30 30 Supply of Signal No.plates. as per Drg No Numbers 20.00 600.20 12004.00

RST-11393 / SK-842 (Inspection by

31 31 Supply of Stop Board/IB Board as per RST- Numbers 20.00 3433.78 68675.60

11791 (STOP BOARD)/ RDSO Drg No.7235/B

as per extent C.Rly practice. (Inspection by

32 32 Supply of Hand Cuff Locks/ Godrej Navtal Numbers 100.00 329.28 32928.00

lock with Three common keys. (Inspection by

33 33 Supply of Shunt Signal Position Light Type Numbers 2.00 16049.79 32099.58

FRP complete as per RDSO Specification

No.RDSO/SPN/ 194/2006/Rev.2.0 or latest

with Off set bracket 3-1/2" to be fitted on 140

mm post drawing No. SA 23840(Adv) Alt-2

for dependent type complete with signal unit

bracket, terminals etc without lenses, lamp,

lamp holder, and to suit LED Signal lamps.

(Inspection by RITES)

34 34 Supply of Phenolic 10mm thick sheet, grade Numbers 10.00 5506.62 55066.20

P3 in standard size of 1.22X1.22 Mtr as per

spec. No IS 2036 of 1995. (Inspection by

35 35 Supply of ARA Terminal blocks with links Numbers 2000.00 76.15 152300.00

made of PBT Specn No.IRS/75/2006(Rev-2)

with latest amendments and RDSO

Drg.No.SA-23741A Alt.4, SA-23745 Alt.5, SA-

(Inspection by RDSO)

36 36 Supply of cartridge fuse block made of PBT Numbers 100.00 170.89 17089.00

as per RDSO Drg No SA-23748 Alt 4, SA-

23749 & Spec No IRS S 75/2006 with latest

amendment. Fuse block shall be suitable for

round head type voltage fuses. (Inspection

37 37 Supply of round head type non detoriating Numbers 100.00 73.55 7355.00

type low voltage cartridge fuse as per Specn

No IRS/S/78/92 with latest amendments

2A/4A/6A capacity (Inspection by RDSO)

38 38 Supply of Tik-tak, piano type switches,5 A (as Numbers 10.00 35.04 350.40

per IS Specification). (Inspection by

39 39 Supply of three pole plug and socket 5 Amp Numbers 10.00 242.12 2421.20

(as per IS Specification). (Inspection by

(Inspection by Consignee)

41 41 Supply of Apparatus Case with godown locks Numbers 10.00 16801.57 168015.70

with detachable handle on both the doors. (a)

Single Case as per Drg. No.SK 783-1 & 2 with

latest alteration. (Inspection by RITES)

42 42 Supply of earth electrode assembly as per Numbers 12.00 1214.88 14578.56

Drg.No. CR/S&T/SK-815 (Inspection by

PUNE DIVISION-S AND T/CENTRAL RLY

RDSO/SPN.197/ 2008 or latest consisting of :

1) Copper bond steel electrode 3 Mtr long

17mm dia with copper bonding thickness of

min. 250 micron & UL listed & marked-01 No.

2) Earth enhancement compound RDSO

Approved in sealed bag of 10 Kgs - 03 No. 3)

Copper strip 150 x 25 x 6mm - 02 No. 4)

Copper strip 300 x 25 x 6mm - 01 No. 5) 35

Sqmm Copper Cable to connect earth

electrode to MEEB - 15 Mtr Approx.

(Inspection by RDSO)

44 44 Supply of 35 Sq.mm Multistrand Single Core Metre 50.00 467.48 23374.00

PVC Insulated Copper for connecting earth

bus bar to earth electrode. (Inspection by

45 45 Supply of Copper Tape 25x6 mm (Bonding Metre 50.00 915.11 45755.50

ring conductor) mounted on insulated

standoff (1 round). (Inspection by Consignee)

46 46 Supply of Track Lead Junction Boxes as per Numbers 20.00 1205.70 24114.00

C.Rly Drg. No.RST 11509 made from fiiber

glass alongwith terminal blocks. (Inspection

specn.No.IRS.S.65/83 (Amd.3) with latest

amendments. (Inspection by Consignee)

48 48 Supply of adjustable Track Feed Resistance Numbers 5.00 1482.01 7410.05

disc type 7.5/15/30 ohms as per RDSO Drg.

No. SA 20161-66/M (Adv) with latest

amendments (with Phenolic moulded base).

(Inspection by Consignee)

49 49 Supply of Track feed battery chargers, 110V Numbers 5.00 2796.06 13980.30

AC input 2, 4 to 6 V DC Output to

Specn.No.IRS.89/2013 Ver.1.0 with latest

amendments. Charger shall be suitable for

charging 80 AH battery. (Inspection by

50 50 Supply of Channel Pins single groove, Numbers 10000.00 2.31 23100.00

galvanised, 7 mm suitable for 4mm dia

bonding wire as per spec No. IRS: S 17-75

Revision 3. (Inspection by Consignee)

51 51 Supply of PVC jacketed wire rope for Track Metre 4000.00 59.94 239760.00

Lead connections. PVC jacketed wire rope

should be of Galvanised steel wire rope 6 mm

dia (6x19 stranded wire with steel core of 6

mm dia) sheathed with PVC 2mm wall

thickness, overall thickness being 10 mm.

PVC sheath should be made of type 6

compound as per IS 5831 of 1984 Reaffirmed

2001 and steel wire rope as per IS:

2266:2019. Reclaimed or recycled material

should not be used. (Inspection by

52 52 Supply of 8 SWG GI wire (4mm dia) suitable Kg 50.00 99.89 4994.50

for track circuit rail bonding. As per IRS

Specification S:13@45>46@ (Inspection by

53 53 'Supply of Hydrometer, Exide make or similar Numbers 10.00 326.33 3263.30

for measuring specific gravity of Battery

Graded acid with mounting stand in location

Boxes.Consignee inspection under

manufacturer certificate. (Inspection by

PUNE DIVISION-S AND T/CENTRAL RLY

54 54 Supply of William stretcher nylon insulation Set 20.00 611.92 12238.40

set suitable for ground connection as per

RDSO drg No T-10367, T-10368, T-10384 as

applicable and to the spec IRS S 23 & 40/84

with latest amendements . (Inspection by

55 55 Supply of Tongue attachment nylon Set 20.00 389.21 7784.20

insulation set consisting of one insulating

plate as per Drg no: RST-106961 & 3 nos of

Ferrules with collars to suite rodding supplied

as per RDSO spec & Drg.no: RST-10692

(Inspection by Consignee)

56 56 Supply Gauge Tie plate nylon insulation as Set 20.00 280.85 5617.00

per RDSO drg No: T- 10372 Alt2, T- 10368, T-

and to the spec IRS S 23 & 40 with

amendement 01 or latest amendements.

(Inspection by Consignee)

57 57 Supply of GI bend pipe, 'B' class, 50mm dia Numbers 20.00 290.82 5816.40

for cable entry in point machines, alongwith

required fixing arrangements as per standard

practice on Central Railway. As per Drg No.

RST.11835. (Inspection by Consignee)

58 58 Supply of GI pipe, inner dia. 100mm dia. B- Metre 180.00 1079.54 194317.20

class as per spec. No.IS 1239 PT. 1/2004 or

l a t e s t with sockets and fittings.

TATA/JINDAL/ZENITH BIRLA make. (Inspection

59 59 Supply of DWC HDPE pipe with one snap fit Metre 120.00 337.11 40453.20

coupler and 'O' ring fire resistant, anti

rodent, in 6 meter length of size 120 mm

outer dia as per RDSO/SPN/204/2011 Ver. 1.1

with Amd.1 or latest. (Inspection by

60 60 Supply of RCC pipes half round of size Metre 500.00 232.30 116150.00

150mm dia outer and 100 mm dia internal 1

mtr long matching to IS No. 458/2003

amendment-1 with Rev.4. (Inspection by

61 61 Supply of Modular terminal block of 2.5 Numbers 1500.00 131.98 197970.00

sq.mm 2 in 2 out type disconnect type

terminal along with as per

RDSO/SPN/189/2004 Rev 3.0. The current

capacity of 16 Amps and more. The terminal

should have marking at centre to view

description from front. Material to be

procured from RDSO approved firms only.

(Inspection by RDSO)

62 62 Supply of DIN Channel for the terminals 1 Numbers 25.00 244.23 6105.75

Mtrs each. (Inspection by Consignee)

63 63 Supply of End plates for modular terminal Numbers 125.00 26.36 3295.00

block. (Inspection by Consignee)

64 64 Supply of End Clamp for modular terminal Numbers 250.00 18.95 4737.50

block. (Inspection by Consignee)

65 65 Supply of Marker Card as per customer spec. Numbers 150.00 94.45 14167.50

(10x10) (Inspection by Consignee)

66 66 Fuse terminal block with LED indication upto Numbers 100.00 209.22 20922.00

2.5 sq.mm screw type one in one out

(suitable for (400 mA, 630mA, 1A. 1.6A, 2A,

4A, 6.3A & 10A) as per RDSO/SPN/189/2004.

(without fuse) (Inspection by Consignee)

67 67 End plate for through terminal block with Numbers 100.00 15.67 1567.00

LED indication. (Inspection by Consignee)

4A, 6.3A & 10A) (Inspection by Consignee)

69 69 Shorting link isulated Grey in colour. Numbers 300.00 16.97 5091.00

(Inspection by Consignee)

PUNE DIVISION-S AND T/CENTRAL RLY

70 70 Operating tool (operating tool, screw driver & Numbers 1.00 9963.56 9963.56

stripper) as per item no.3.1 of Chapter-III.

(Inspection by Consignee)

71 71 Supply of 4.5 Kg CO2 type fire extinguisher Numbers 20.00 5774.51 115490.20

alog with all accessaries, extinguisher testig

certificate has to be supplied along with -

Supply of ISI marked Carbon di Oxide type

(BC) fire extinguisher of 4.5 Kg capacity

confirming to IS 2878:2004 from seamless

cylinder, with IS marked control value, high

pressure mtr., Long discharge hose and horn

complete with initial gas charged with

carrying handle and wall mounting braket

etc., as required by Site Engineer. (Inspection

72 72 Supply of Permanently Lubricated HDPE Kilometre 0.50 84047.56 42023.78

Telecom duct of size 50/42 mm and

accessories as per latest Specification TEC

GR No. GR/TX/CDS-008/03/March 11 with

latest amendment" for OFC cable of size 24

fibre armoured in length of 1000 mtrs/roll.

Duct to be supplied from TEC approved

sources. (Inspection by Consignee)

Item- 2 Part-II : Execution Portion (SOR Items)

S No. Item Description of Item Unit Qty Rate Amount

1 1 Termination of cable cores on ARA Numbers 4000.00 13.14 52560.00

terminal/disconnecting links in the cable

termination rack. This includes all assosiated

works of pulling out the cable from under

ground, peeling off insulation, dressing of

cable core supported on sting rod with

contractors own material. The work shall be

done as per instructions of Rly engineer at

site. (Inspection by Consignee)

2 2 Charging of 2V Lead Acid Batteries with Per Unit 15.00 87.29 1309.35

contractors own battery grade sulphuric acid

and distilled water with minimum two charge

- discharge cycles, installation of charged

batteries in groups & their connection &

wiring. The work shall be done as per extant

practice of C.Rly & instruction of Engineer-in-

charge.Detailed measurements of initial

charging shall be recorded jointly by

contractor & Rly's site-in-charge. (Inspection

by Consignee) [Unit to be read as - Per 100

3 3 Circuit wiring/jumpering as per circuit Per Unit 5000.00 13.71 68550.00

diagrams in the relay racks/IDF rack

tagbloc k s. This includes preparation of

Jumper sheets by wire man duly checked by

firm's site supervisor & wire to wire testing as

per circuit diagram. Any wrong jumper done

by wireman will not be paid & correction shall

be done free of cost. Jumper wires will be

issued by Railways. Good quality solder rosin

core to be supplied by contractor for

soldering of Jumper wires. Soldering of

jumper wires to be done after completion of

testing by Railways. (Inspection by

Consignee) [Unit to be read as -Jumper].

PUNE DIVISION-S AND T/CENTRAL RLY

4 4 Plugging of relays, Provision for temporary Per Route 250.00 388.58 97145.00

relays for N1 working if any, laying of

temperory cables for mock panel and wiring

of Mock panel. Panel through testing of PI/RRI

as per selection table, control table etc. This

also includes alteration if any in panel wiring,

laying & termination of indoor cables from

Panel to IDF/CT rack of relay room .

Contractor shall depute Supervisor &

wiremen technically qualified to carryout

Panel through testing as per approved

design. Technical knowledge of contractor's

staff will be judged by Railways Engineer

incharge before permiting them to do the

testing. (Inspection by Consignee)

5 5 Relay Contact break test of indoor relay Per Unit 100.00 348.69 34869.00

w iring. Contractor shall depute Engineer,

Supervisor & wiremen technically qualified to

carryout contact break testing as per

approved circuit diagrams. Firm Engineer to

sign circuit diagrams for break testing after

carrying out the test in presence of Railway's

site supervisor/Engineer. (Inspection by

Consignee) [Unit to be read as - A3 Size

circuit per Sheet].

6 6 Functional testing of PI/RRI/IBS/Autosignal Per Route 250.00 363.93 90982.50

etc. as per Selection table, control table,

sqare sheet etc. Contractor shall depute one

Engineer, one Supervisor & wiremen

technically qualified to carryout functional

testing as per approved design. Technical

knowledge of contractor's staff will be judged

by Railways Engineer incharge before

permitting them to do the testing. (Inspection

7 7 Lettering & Numbering of detail and Rack 10.00 387.59 3875.90

description writing of particulars of

terminations & equipments on relay rack,

relays, cable termination rack, battery &

power equipments, IPS, operating panel, axle

counter etc constituting entire system with

contractor's own paint and writing material

("Asian/Dulux" make enamel paints to be

used). The work shall be done as per extant

practice on C.Rly & instruction of Rly

engineer at site. (Inspection by Consignee)

8 8 Preparation of cable route plan, cable Lot 1.00 58842.92 58842.92

coreage plan, location particulars, Cable

termination rack particulars, cable

meggering report, earth resistance

particulars, Traction bonding diagram, 1/2

wire count sheet and any other drawing in

Autocad in A3/A4 size.The contractor shall

initially supply 3 sets of circuits complete for

approval of Railways. Railways will return

one set to the contractor duly approved with

alterations/corrections if any. The contractor

shall incorporate Railways

alterations/corrections in the tracings without

any deviation and submit all tracings

complete in all respects to the Railways . This

includes submission of final cable route plan

as per laid cable duly measured at every

30m clearly indicating distance of laid cable

from fixed point of reference & indicating all

track crossings and tail cables. This also

include designing of cable coreage plan

based upon I.P in consultation with engineer-

in-charge. (i) For big yards (> 100 routes)

(Inspection by Consignee)

PUNE DIVISION-S AND T/CENTRAL RLY

9 9 Design and supply of Detailed Signalling Lot 1.00 1288556.77 1288556.77

Circuits including Panel diagram(if required) ,

Route section Plan , Selection Table , Fuse &

Negative Tag. Analysis , Contact analysis ,

Relay Rack Arrangement and wire count

sheets etc. in A3 size.Completion circuit shall

be plotted in AutoCAD. The contractor shall

initially supply 2 sets of circuits duly signed

by the circuit designer having substantial

experience on design side for making such

circuits, complete for approval of Railways.

Railways will return one set of circuit to the

contractor duly approved with alterations

/corrections, if any. The contractor shall

incorporate Railway's alterations/corrections

in the original tracings & CD without any

deviation and submit two copies of the

modified circuits. Original tracings so

modified & final CD complete in all respects

alongwith 6 sets of final approved circuits

(out of which one set shall be supplied in

transparent bags. Only two sheets of circuits

shall be placed in one bag each ) shall be

submitted to the Railways in case there are

no further alteration suggested by Railways.

This also includes modification in yard. (i) for

major yards and stations having more than

200 routes (Inspection by Consignee)

10 10 Excavation and Casting of Shunt signal Numbers 2.00 3047.93 6095.86

foundation as per Drg No SK 802 with

contractor's own materials including cement

and anchor bolts of standard size. The

required scaffolding Ferma etc for Casting of

foundation will have to be brought by the

contractor at his own cost. (Inspection by

11 11 Erection of shunt signal with Surface Base, Numbers 2.00 553.90 1107.80

Post, Signal unit and fixing of No.plates. The

work shall be done as per instructions of Rly

engineer at site. (Inspection by Consignee)

12 12 Fixing of Stop Board, Block section limit Numbers 20.00 636.55 12731.00

Board, goods warning board with contractors

own material. The work shall be done as per

instruction of Rly engineer at site. (Inspection

13 13 Termination of tail cable on Shunt signal Numbers 2.00 409.84 819.68

units and wiring with contractor own

material, fixing of lenses etc. The work shall

be done as per instruction of Rly engineer at

site. (Inspection by Consignee)

14 14 Fabrication and fixing of phenolic Numbers 10.00 2361.58 23615.80

laminated/Fibre glass sheet in location box

by providing all fixtures as per Railway

Drawing including fixing of PVC coated/with

PVC pipe covered string rods at the back side

for cable support with contractor's own

materials. The work shall be done as per drg

and arrangement similar to SK 783-1&2. with

latest alterations & as per instructions of Rly

engineer at site.. (a) Single Case (Inspection

15 15 Fixing of ARA Terminals and fuse blocks on Per 2000.00 14.74 29480.00

phenolic laminated sheets and fixing by Conductor

stainless steel/brass nuts & bolts. This

includes provision of two additional holes on

the board on either side for cable conductor

entry. (Inspection by Consignee)

PUNE DIVISION-S AND T/CENTRAL RLY

16 16 Termination of cable cores on ARA Per 4000.00 11.09 44360.00

terminal/fuse blocks in the apparatus Cases/ Conductor

cable termination rack. This includes all

associated works of pulling out the cable

from underground. The work shall be done as

per location plans and instructions of Rly

engineer at site. (Inspection by Consignee)

17 17 Excavation and Casting of Apparatus Case Numbers 10.00 10369.35 103693.50

foundation with contractors Anchor bolts,

cement, ballast and other materials. The

required scaffolding Ferma etc for Casting of

foundation will have to be brought by the

contractor at his own cost. (i) Single Case as

per Drg No . SK-803 (Inspection by

18 18 Erection of Apparatus Cases. This includes Numbers 10.00 1151.61 11516.10

filling of location foundations and plastering

(i) Single Case (Inspection by Consignee)

19 19 Installation of Eqpt. (Relays, resistance, Numbers 10.00 1687.78 16877.80

chargers batteries etc.as applicable) & wiring

of the same in apparatus Cases as per

location diagrams & circuit diagrams, as per

Instruction of site incharge and practice. (i)

Single Case (Inspection by Consignee)

20 20 Installation of earth electrode assenbly as Numbers 12.00 2908.63 34903.56

per Drg.No.RE/S&T/SIG/Tender/SK726/85

including earth wire connected through GI

wire 8 SWG supported on M.S. flat of size

6mm x 40 mm to earth electrode as per drg.

No. CR/S&T/SK-815 for sigg. Equipment such

as lever frames, apparatus case, signals,

relay racks,block insruments, and etc. as per

RE manual. The earth value should be less

than 10 Ohms including the lead wire. The

value should be measured in presence of Rly.

supervisor. It should be documented and

painted on earth enclosure made of

concrete.( only earth electrode will be

supplied by Railway). All other material

required for provision of earthing will be

brought by the contractor. (Inspection by

21 21 Erection, Fitting and Rail connection of Track Numbers 20.00 1501.79 30035.80

Lead Juntion Box on two supports(M.S.angle)

with contractor's fixing material and PVC

jacketed wire for track lead connection

including angles of size 40 x 40 x 5 mm 1200

mm length. This will include drilling of holes

for track lead/side connections on rail. The

work shall be carried out as per Drg. No. SK-

845 or/& instructions of Rly engineer at site.

(Inspection by Consignee)

22 22 Provision of bonding with contractor's PVC Numbers 50.00 195.19 9759.50

jacketed wire rope for Track Lead connection.

PVC jacketed wire rope should be of

Galvanised steel wire rope 6mm dia (6 x 19

stranded wire with steel core of 6 mm dia )

sheathed with PVC 2mm wall thickness,

overall thickness being 10mm PVC sheath

should be made of type 6 compound as per

IS 5831 of 1984 Reaffirmed 2001 and steel

wire rope as per IS:2266:2019. Reclaimed or

recycled material should not be used. This

will include drilling of 7.1mm dia holes in rails

(4 Nos) and provision of two jumpers for each

bond, clipping of bonds etc. with contractors

own materials and tools as per instruction of

Rly engineer at site. (Inspection by

PUNE DIVISION-S AND T/CENTRAL RLY

23 23 Provision of bonding with GI wire 4mm dia ( 8 Numbers 50.00 184.64 9232.00

SWG) for track jumper & fish plate joints

bonds. This will include drilling of 7.1mm dia

holes in rails (4 Nos) a n d provision of two

jumpers for each bond, clipping of bonds etc.

with contractors own tools as per instruction

of Rly engineer at site. (Inspection by

24 24 Excavation of cable trench as per cable route cum 1050.00 367.07 385423.50

plan,1.0 mt. deep and 300mm wide along

side the track in normal soil/strata,

conforming to distances as per cable route

plan and refilling after cable laying. This work

includes covering of cable laid in trench by

loose soil for a layer of 50mm thickness after

clearing of route,bushes etc. It shall be

ensured that top of the cables laid is at a

depth of 0.8m or more. It if is less, then the

width and depth shall be suitably increased

and accordingly proportionate payment shall

be made. In case depth of trench is not

achievable due to site conditions

proportionate payment will be made as per

procedure. The work shall be done as per the

extant practice on Central Railway and

instructions of Railway Engineer at site. Drg.

No. SK 805 (Inspection by Consignee)

25 25 Excavation of cable trench as per cable route cum 300.00 611.79 183537.00

plan,1.0 mt. deep and 300mm wide along

side the track in hard soil, conforming to

distances as per cable route plan and

refilling after cable laying. This work includes

covering of cable laid in trench by loose soil

for a layer of 50mm thickness after clearing

of route,bushes etc. It shall be ensured that

top of the cables laid is at a depth of 0.8m or

more. If it is less, then the width and depth

shall be suitably increased and accordingly

proportionate payment shall be made. In

case depth of trench is not achievable due to

site conditions proportionate payment will be

maden as per procedure. The work shall be

done as per the extant practice on Central

Railway and instructions of Railway Engineer

at site. Drg. No. SK 805 (Inspection by

26 26 Cutting of all types of Roads/ platforms cum 20.00 3058.96 61179.20

(ecxcept concrete type) for trenching and

excavation to depth of 300mmx300mm wide

approx. and refilling after laying of RCC/GI

/DWC pipe & to restore them to original

condition. The work shall be done as per

extant practice on C.Rly & instructions of Rly

engineer at site. Drg. No. SK 807 (Inspection

27 27 Fixing of GI pipes for crossing the culverts, Metre 180.00 73.38 13208.40

bridges etc. and concreting of ends with

brick masonry at both ends as per the

instruction of Rly engineer at site. (Inspection

flange/road level (for LC) and 0.3Mtrs. to 0.6

Mtrs wide and back filling after placing of

DWC/RCC/GI pipe.(Placing of DWC/RCC/GI

pipe coverd separately. The ballast disturbed

be screened and dressed as required by

Engineer-in-charge or his representatives and

road tarred immediately. Drg. No. SK 806

(Inspection by Consignee)

PUNE DIVISION-S AND T/CENTRAL RLY

29 29 Laying of DWC/RCC pipes alongwith Metre 120.00 59.62 7154.40

collars/RCC Half round pipes in trenches at

places of track and road crossings, platform

cuttings etc. (Inspection by Consignee)

30 30 Laying of signalling/Power/Telecom cable of Kilometre 25.00 5450.97 136274.25

various cores/sizes in trenches. (Inspection

31 31 Wherever depth of 0.5M cable trench is not cum 30.00 5589.55 167686.50

feasible, cable shall be protected as under:-

Preparation of cement mixture 1:3:6 with

contractor's own materials and spreading

cement concrete mixture layer of 100 mm

thick over the already laid cables in the

excavated trench. (Inspection by Consignee)

32 32 Fixing of modular terminal/fuse blocks Numbers 1500.00 21.92 32880.00

alongwith all accessories with provision of

fixing holes on hylam sheets/side angles of

Loc Box and fixing by galvanised nuts &

bolts. This includes fixing of DIN channel

alongwith PVC Comb type 'C' channel (size 2

inch x 2 inch) for cable termination on

modular terminal. The PVC channel with

cover to be supplied by firm as required. The

work shall be done as per the instruction of

Rly engineer at site. (Inspection by

33 33 Termination of cable cores on ARA terminal / Numbers 4000.00 8.17 32680.00

Disconnecting link/fuse blocks, in the

Apparatus cases/cable termination rack. This

includes all assosiated works of pulling out

the cable from under underground. The work

shall be done as per location plans and

instructions of Rly engineer at site.

(Inspection by Consignee)

bridges/culverts/concrete drawin/mountain

ridges etc. with suitable GI bend shall be

provided where there is turning of pipe as

per the instruction of Site engineer. GI

clamps at every 2m as shown in the drawing

to be fixed. Suitable holes to be made in the

pipe before laying as per the instruction of

the site engineer 10mm dia Drg. No. SK 808.

(Inspection by Consignee)

35 35 Making an entrance for new cable in old Numbers 10.00 531.37 5313.70

existing location, Casting concreting and

curing of foundation and restoring it to old

position by perfect masonry/concreting work.

Contractor will ensure that cable entered in

Location Box is properly protected.

(Inspection by Consignee)

36 36 Laying of RCC half round cement pipe of Metre 500.00 41.07 20535.00

appprox. Size (150/300mm dia X 2 mtr.

length) inside the trench after laying of

cable. Pipes shall be placed as per directives

of site engineer. (Inspection by Consignee)

PUNE DIVISION-S AND T/CENTRAL RLY

37 37 Painting of two coats of synthetic enamel Numbers 10.00 456.68 4566.80

paint over one coat of primer on the

following after scraping & cleaning surface

wherever necessary with contractor' own

supply of paints.Wherever required

contractor shall apply coating of epoxy paint

also as per instructions of site-in-

charge.Epoxy paint will be supplied by

Railways. NOTE:- The paint and primer

should be from M/s Asian paints Co. Ltd.,. The

paints will be primer (IS 5660 of 1970) the

Aluminium synthetic black enamel (IS 2932

of 1974) brilliant white and yellow Painting

two coats of enamel paint over one coat of

p r i m e r. (i) Apparatus Case Full Size.

(Inspection by Consignee)

38 38 Painting of two coats of synthetic enamel Numbers 2.00 207.85 415.70

paint over one coat of primer on the

following after scraping & cleaning surface

wherever necessary with contractor' own

supply of paints.Wherever required

contractor shall apply coating of epoxy paint

also as per instructions of site-in-

charge.Epoxy paint will be supplied by

Railways. NOTE:- The paint and primer

should be from M/s Asian paints Co. Ltd.,. The

paints will be primer (IS 5660 of 1970) the

Aluminium synthetic black enamel (IS 2932

of 1974) brilliant white and yellow Painting

two coats of enamel paint over one coat of

primer. (ii) Shunt signal post with signal unit,

surface base as per Central Railway's

Standard Practice. (Inspection by Consignee)

39 39 Painting of two coats of synthetic enamel Numbers 20.00 102.67 2053.40

paint over one coat of primer on the

following after scraping & cleaning surface

wherever necessary with contractor' own

supply of paints.Wherever required

contractor shall apply coating of epoxy paint

also as per instructions of site-in-

charge.Epoxy paint will be supplied by

Railways. NOTE:- The paint and primer

should be from M/s Asian paints Co. Ltd.,. The

paints will be primer (IS 5660 of 1970) the

Aluminium synthetic black enamel (IS 2932

of 1974) brilliant white and yellow Painting

two coats of enamel paint over one coat of

primer. (iii) Track lead Junction Box. (Black

enamel outside only) (Inspection by

40 40 Lettering / Numbering of Signals, Point Numbers 32.00 65.17 2085.44

Machine, Track Lead Junction Boxes, Block

Joints, Apparatus Cases etc. (each item to be

taken as One Unit) This work will be carried

out as per the standard practice being

followed in Central Railway. (Inspection by

41 41 Lettering / Numbering Termination Numbers 10.00 276.39 2763.90

particulars, equipments names etc., legibly

and neatly inside location boxes. (a) Full

Case. (Inspection by Consignee)

42 42 Laying of HDPE duct in trench and its Kilometre 0.50 5464.60 2732.30

protective work as per direction of site

engineer. (Inspection by Consignee)

Item- 3 Part-III : Supply & Execution portion (Non-SOR Items)

S No. Item Description of Item Unit Qty Rate Amount

PUNE DIVISION-S AND T/CENTRAL RLY

1 1 Supply of tool kit as given below - (i) Service Set 1.00 90280.22 90280.22

test panel including meter for test of track

equipment, tools for mounting and

adjustment of track equipment and standard

jig for drilling of holes in rail (as per

manufacturer specification, list to be given

by manufacture). Each set consists of - Tool

kit ETU001 & EDT001: (a) True RMS digital

multimeter with probe set-1 no. (b) Extended

wired socket to interface with diagnostic plug

- 1 no. (c) Selector switch on panel base - 1

no. (d) Adjustable torque wrench with 13 mm

& 19 mm inserts - 1 set. (e) 19 mm double

ended spanner - 1 no. (f) Dummy wheel - 1

no. (g) Screw driver set with mains tester - 1

no. (h) Drilling template - 1 no. (i) Centre

punch - 2 nos. (j) Carrying case for ETU001 -

1 no. (k) Carrying case for EDT001 - 1 no.

(Inspection by Consignee)

2 2 Supply of AC and DC low current clamp Numbers 1.00 30511.28 30511.28

meter with range 1mA to 100 A; make GTC

CM 100 or similar model from make Fluke,

Rishab, Motwane or similar. (Inspection by

3 3 Supply of Analog Insulation Tester (megger) Numbers 1.00 2616.66 2616.66

Hand Driven Generator, 500 Volts, 0-100

Mega Ohms resistance. Confirmed to

IS:2992-1987, Rotation Speed:160 rpm,

Housed in antimagnetic Metal body with

collapsible handle metallic flap over the glass

window scale, wide and anti-parallax mirror

scale. The megger should be supplied along

with carrying bag and test leads. Warranty

and Calibration certificate to be submitted

with megger by supplier when delivered.

Make: Shanti/CIE/ Nippen/ Motwane/ Kusam-

Meco/Yokins/Rishabh/Waco. (Inspection by

4 4 Supply of True RMS Digital Multimeter, Numbers 1.00 10015.89 10015.89

4000Count, Voltage: 1000V AC/DC. Make

Fluke 17B+or DI-LOG 9206 or Megger Model

no.AVO410. (Inspection by Consignee)

5 5 Supply of digital clamp type earth resistance Numbers 1.00 92603.86 92603.86

tester, Range 0.01 To 1000 Ohm, Motwane

make model DECT-2 or similar. (Inspection

6 6 Supply of digital earth tester of Motwane Numbers 1.00 26985.40 26985.40

make model DET-20 or similar. (Inspection

7 7 Supply of Stencil type LED Route Indicator Numbers 1.00 91299.82 91299.82

indicating 1 to 9 nos. (In the event of failure

of any of the LED Segment, ECR will drop).

(Inspection by Consignee)

8 8 Supply of Nylon Insulations for TWS Point Numbers 100.00 427.56 42756.00

Machines consist of plate to RDSO

Drg.No.S3404 - 02 Nos., Stretcher bar bush

RDSO Drg.No.S23199 - 12 Nos., Flat washer

RDSO Drg.No.S8640 - 12 Nos. Throw Rod

bush RDSO Drg.No.S3436 - 01 No., Flat

washer RDSO Drg.No.S8640/2 - 02 Nos. Lock

rod bush RDSO Drg.No.S22179 - 02 Nos.

Washer RDSO Drg.No.S6840/1 - 04 Nos.

Detection rod bush RDSO Drg.No.S23199 - 02

Nos. Flat washer RDSO Drg.No.S6840 - 04

Nos. and MS Flat washers suitable to RDSO

No.S8640 - 16 Nos., Suitable to RDSO

Drg.No.S8640/1 - 04 Nos., Suitable for RDSO

Drg.No.S4680/02 - 04 Nos. (Inspection by

PUNE DIVISION-S AND T/CENTRAL RLY

9 9 Supply and fixing of Cable Route Marker Numbers 100.00 345.32 34532.00

concrete. (Inspection by Consignee)

10 10 Providing Road Breaker/concreate breaker/ Hour 100.00 1707.96 170796.00

boulder or rock breaker with compressor &

Jack Hammer for Railway work such as

cutting & dismentalling of road

concrete/Brick pucca structure(RCC/Steel

section) including contractors fuel, driver and

all other charges. (Inspection by Consignee)