PROVISION OF OFFICER MESS FOR 80 OFFICERS AT INS UTKROSH PORTBLAIR

Amount

GENERAL SUMMARY NOTE: Schedule ‘A’ Part I to XIV are prepriced by MES under Ser No. 2.00 to 15.00. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lumpsum price worked out by the contractor for "Building / Structures” as listed in Schedule ‘A’ Part - I, inserted by MES

Lumpsum price worked out by the tenderer for "Excavation & Earth work including Site Clearance and Land Development" as listed in Schedule 'A' Part-II

Lumpsum price worked out by the tenderer for "Internal water Supply" as listed in Schedule ‘A’ Part-III

Lumpsum price worked out by the tenderer for "Internal Electrification" as listed in Schedule ‘A’ Part-IV

Lumpsum price worked out by the tenderer for "Demolition/Dismantling" as listed in Schedule ‘A’ Part-V

Lumpsum price worked out by the tenderer for "Solar Water Heating System" as listed in Schedule ‘A’ Part-VI

Lumpsum price worked out by the tenderer for "Cooling Appliances" as listed in Schedule ‘A’ Part-VII

Lumpsum price worked out by the tenderer for "Internal Electric Tele Conduits" as listed in Schedule ‘A’ Part-VIII

Lumpsum price worked out by the tenderer for "Roads/Hardstanding/Paths/Culverts" as listed in Schedule ‘A’ Part-IX

Lumpsum price worked out by the tenderer for "External water Supply" as listed in Schedule ‘A’ Part-X

Lumpsum price worked out by the tenderer for "External Electrification" as listed in Schedule ‘A’ Part-XI

Lumpsum price worked out by the tenderer for "Sewage Disposal" as listed in Schedule ‘A’ Part-XII

Lumpsum price worked out by the tenderer for "Area Drainage" as listed in Schedule ‘A’ Part-XIII

Lumpsum price worked out by the tenderer for "Compound Wall / Retaining Wall / Fencing" as listed in Schedule ‘A’ Part-XIV

Subtotal

NOTE: Schedule ‘A’ Part - XV is not prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6.

INTERNAL ELECTRIFICATION & SOLAR WATER HEATING SYSTEM M&L for point wiring complete with 1100 volts grade 1.5 sq.mm (normal area) single core, PVC insulated, unsheathed, multi-stranded copper conductor cable FRLS drawn through and including medium grade rigid non-metallic PVC conduit of suitable size not less than 20mm dia with all necessary fittings concealed in wall/roof/floor duly earthed with one run of single core cable of same size but green in color as continuous earthing were connected to common earth duly including 1.6mm thick pressed steel modular box of required size for housing modular switch, socket, accessories, concealed in wall all as specified for following:- One light/fan/exhaust fan/bell point controlled by one No. one way switch 5 Amps. Note for item No.18.01 to 18.04:- (i) Modular plate for housing switch, socket, accessories shall be measured and paid separately under appropriate item. (ii) The wiring shall be done in proper color coding using red, yellow and blue for phase, black for neutral and green for earth leads.

Ditto all as per item No.18.01 above for One 3 pin socket outlet point on same board.

Ditto all as per item No.18.01 above for One light point controlled by two Nos 2 way switches.

Ditto all as per item No.18.01 above for One three pin socket outlet point on independent board.

All as per item No.18.01 here-in-before but including 1.6mm thick pressed steel modular box of required size for housing modular switch socket accessories, concealed in walls all as specified for 04 light point controlled by one switch/MCB all as directed by Engineer-in-Charge. (Note:- Modular plate for housing switch socket accessories shall be measured and paid separately under appropriate item)

All as per item No.18.01 here-in-before but including 1.6mm thick pressed steel modular box of required size for housing modular switch socket accessories, concealed in walls all as specified for one 3/5 pin, 15 Amps socket outlet point complete all as specified and as directed.. (Note : Modular plate for housing switch socket accessories shall be measured and paid separately under appropriate item)

All as per item No.18.01 here-in-before but using 4 sqmm copper cable for one 3/5pin, 15 Amps socket outlet point complete all as specified and as directed.

Supply and fix switch piano modular type single pole, one way, 6 Amps, 240 volts, one module complete all as specified and as directed.

Supply and fix switch piano modular type single pole, two way, 6 Amps, 240 volts, one module complete all as specified and as directed.

Supply and fix switch piano modular type single pole, one way, 15 Amps, 240 volts, one module complete all as specified and as directed.

Supply and fix bell push modular type single pole, 6 Amps, 240 volts, one module complete all as specified and as directed.

Supply and fix modular type socket outlet 5 pin, 6 Amps, 240 volts, two module complete all as specified and as directed.

Supply and fix modular type socket outlet 6 pin, 15 Amps, 240 volts, two module complete all as specified and as directed.

Supply and fix modular type fan regulator five stepped electronic control, 240 volts, one module complete all as specified and as directed.

Supply and fix modular plate white colour suitable for mounting modular switch/socket accessories for fixing with modular boxes for one module complete all as specified and as directed.

Supply and fix modular plate white colour suitable for mounting modular switch/socket accessories for fixing with modular boxes for two module complete all as specified and as directed.

Supply and fix modular plate white colour suitable for mounting modular switch/socket accessories for fixing with modular boxes for three module complete all as specified and as directed.

Supply and fix modular plate white colour suitable for mounting modular switch/socket accessories for fixing with modular boxes for four module complete all as specified and as directed.

Supply and fix modular plate white colour suitable for mounting modular switch/socket accessories for fixing with modular boxes for six module complete all as specified and as directed.

Supply and fix Double pole and earth enclosure with a three pin and earth plug with socket 32A capacity including one double pole MCB 32A capacity,10KA complete all as specified and as directed.

Supply and fix single phase Key based BIS marked liberty + pre payment static energy meter tamper proof electronic AC 240V, 50Hz with LCD display unit of current rating range 05-30 A Measures and displays kWh, V,I, kW six month history of energy and MD in kW Confirming to IS including internal wiring using PVC cable copper conductor of size 2.5 Sq mm and necessary testing commissing etc. with the following :-(a) Supply and install Vending software -Liberty on line with 2 nos VascoKey. (b) Supply and install tarrief designing customer data based defination , training of the vending system operator , Liberty on line. (c) Supply and providing all other software/hardware for Pre-Paid meter. (d) Maintenance of one years after date of completion of the work. Make:- L&T(Cat No.WM101BC7ASPREPAID Model: TAURUS) or equivalent model of Secure/Schneider.

Ditto all as per item No.19 above but of three phase 440 volt current range 10-60 Amps with inbuilt CT's complete all as specified and as directed. Make:- L&T(Cat No.WR300BC7ASPREPAID Model: ATRIA) or equivalent model of Secure/Schneider. Note for item No.19 & 20:- Meter shall be fixed in the panel mentioned in this Sch vide Sl item No.49.

Supply and fix Double pole and earth enclosure with a three pin and earth plug with socket 16A capacity complete all as specified and as directed.

Supply and fix TV socket with cable grip complete all as specified and as directed. Make:-L&T/Havells/HPL

Material and Labour for rigid non metallic, PVC conduit of size 20mm dia inclusive of boxes ( junction / terminal), all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts saddles, pipe hooks etc for TV sockets / Telephone sockets/ CCTV complete all as specified and as directed.

Supply and fix Brushless Direct current (BLDC) motor with inbuilt smart electronic circuit ceiling fan 1400mm sweep, AC single phase 230 Volts, remote controlled with remote, complete with down rod, canopy and necessary fixing/hanging accessories, colour of fan white, hanging the fan with ceiling complete all as specified and as directed. Make:- Gorilla/Crompton/Bajaj/Havells/Usha

Ditto all as per item No.24 here-in-before but of 1200mm sweep complete all as specified and as directed. Make:- Gorilla/Crompton/Havells/Usha

Supply and fix wall mounting fan 450 mm sweep single phase 230 Volt 50 Hz energy efficient smooth functioning including fixing arrangement , suitable size socket for connecting complete all as specified and as directed. Make:- Crompton/Bajaj/Usha

Supply and fix Exhaust fans 225 mm sweep single phase 230 Volt 50 Hz heavy duty 1400 rpm energy efficient smooth functioning with sutable size of louver including fixing arrangement , opening of hole complete all as specified and as directed. Make:- Crompton/Bajaj/Usha

Supply and fix Exhaust fans 600 mm sweep single phase 230 Volt 50 Hz heavy duty 1400 rpm energy efficient smooth functioning with sutable size of louver including fixing arrangement ,opening of hole complete all as specified and as directed. Make:- Crompton/Bajaj/Usha

Supply and Fix LED type tube light fittings 4 feet long 1x20W 230V ,decorative ultra slim square profile liner LED lighting fixture with extruded polycarbonate envoirnmental friendly, energy efficient tube light life time 40,000 burning Hrs, lumen output 2000lm, color temp-6000K,Surge protection of 2kV with voltage protection 160-360V, power factor >0.9 complete & prewired for LED tube complete fixed to wall / Ceiling by suitable downrods, PVC round blocks and connection by flexible PVC cable with stranded copper conductor from ceiling rose to connector of the fitting including 1x20W LED tube complete all as specified and as directed. Make:- Philips Cat No-BN021C LED 20S PSU CW GR S2 or Equivalent in WIPRO/CROMPTON 03 years Guarranty as per manufacturer instructions or lifetime 40,000 burning Hrs whichever is earlier as applicable.

Supply and fix downlight 36Watt capacity(2'x2') 90Lm/w 5700 K, in build electrical protections like overvoltage ,short circuit and over load including Driver with high efficiency , low power loss excellent with high transmittance efficiency connected from ceiling rose/existing point complete all as specified and as directed. Make:- Crompton Cat No-LCTLRF7-36-CDL or equivalent in Philips/Havells

Supply and fix downlight 12Watt capacity square type in build electrical surge protections like overvoltage , short circuit and over load of 2kv including Driver with high efficiency and lowpower loss excelent with high transmittance efficiency connected from ceiling rose with three core copper wire complete all as specified and as directed. Make:- Philips (Star Surface) or equivalent in Crompton/Havells

Supply and fix indoor wall mounting light fittings 12Watt , in build electrical protections like overvoltage ,short circuit and over load including Driver with high efficiency and lowpower loss excellent with high transmittance efficiency complete all as specified and as directed. Make:- LUKUR Cat No-LWL105 or equivalent in Crompton /Philips/Havells

Supply and fix 10 Watt LED fittings with surge protection of 2 KV with wide voltage protection 160-360 Volt, lumen output 900lm complete all as specified and as directed. Make:- Philips Cat No-AstroLine or equivalent in Wipro/Crompton

Supply and fix building street light 30 Watt capacity LED including electronic driver IP 65 protection ,fixing with brackets of GI pipe 32mm bore 1.2 mtr long bend to shape including clamp nut and bolt ,connected fron celing rose or existing point complete all as specified and as directed. Make:- Philips Cat No-BRP046LED30 CW MR S1 PSU GR or equivalent in WIPRO/CROMPTON

Supply and fix Sheet steel factory made double door, powder coated MCB DB with bus bar 200Amps,Neutral link, Earth bar, double door type SPN 6 Way 220 Volt, MCB as an Incomer complete all as specified and as directed. Make:- L&T / Legrand / Schneider / ABB

Supply and fix Sheet steel factory made double door, powder coated MCB DB with bus bar 200Amps,Neutral link, Earth bar, double door type SPN 12 Way 220 Volt, MCB as an Incomer complete all as specified and as directed. Make:- L&T / Legrand / Schneider / ABB

Supply and fix Sheet steel factory made double door, powder coated MCCB DB with bus bar 400 Amps,Neutral link, Earth bar, double door type V-TPN (6+6+6 out going) Way 415 Volt, MCCB as a Incomer complete all as directed. Make:- L&T / Legrand / Schneider / ABB

Supply and fix MCB SP 230Volts,10KA, 6 to 32 Amps 'C' curve complete all as specified and directed.

Supply and fix MCB SPN 230Volts,10KA,63 Amps 'C' curve complete all as specified and directed.

Supply and fix MCB SPN 230Volts,10KA,10 Amps 'C' curve complete all as specified and directed.

Supply and fix MCB SPN 230Volts,10KA,16 Amps 'C' curve complete all as specified and directed.

Supply and fix MCB SPN 230Volts,10KA, 20 Amps 'C' curve complete all as specified and directed.

Supply and fix MCB TPN 230Volts,10KA, 20 Amps 'C' curve complete all as specified and directed.

Supply and fix MCB TPN 230Volts,10KA, 32 Amps 'C' curve complete all as specified and directed.

Supply and fix MCB TPN 415 Volts,40 Amps,10KA capacity complete all as specified and directed.

Supply and fix MCCB 4 Pole 415Volts,63 Amps,16KA capacity complete all as specified and directed.

Supply and fix MCCB 4 Pole 415Volts,100 Amps , 16KA capacity complete all as specified and directed. Make for item No 38 to 47:- Legrand / ABB / Schneider / L&T / Siemens.

Material and labour for, Earthing complete with galvanized steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to GI wire 4mm dia as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I connected to main board/ distribution board/ LT panel etc., including testing on completion complete all as specified and directed.

Note 1: The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B-1 using 20mm graded stone aggregate, 50mm thick cover slab reinforced with 6 Nos of 8mm dia TMT bars both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl. Page No. 422 of SSR Part-II. Note 2: Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.

Supply & Fixing metal clad box for housing of switch & socket including bakelite sheet of suitable size complete all as specified and as directed.

COOLING APPLIANCES Supply and fix refrigerator, electric driven (single phase) ,BEE 5 star rating single phase, 230 volt ,50 Hz, ISI marked of capacity 360 Litres complete all as specified and as directed.

Supply and fix automatic voltage stabilizer single phase, designed for input voltage variation between 160 to 290 Volts with output voltage stabilizer 230 volts + 2.5% of 3KVA capacity complete all as specified and as directed.

Ditto all as per item No.51.01 here-in-before but of 1KVA Capacity complete all as specified and as directed.

INTERNAL ELECTRIC TELE CONDUITS Supply and fix Module Type telephone socket complete all as specified and as directed.

EXTERNAL WATER SUPPLY Supply & Laying Ductile Iron pipe 100 mm bore with spigot and socket ends Class K-9 in any length all as per conforming to IS-8329/2000 with blue epoxy coating laid in trenches suitable for rubber tyton joints including jointing materials all as required at site for branch connection including cutting and threading complete all as specified and as directed.

Cutting of cast iron water mains in position for insertion of tee of size 200x200x100mm spigot socketed ends including lead joints and all connecting fittings for branch connections complete all as specified and as directed.

Material and labour for Construction of solid block masonry valve chamber of size 900x900x750mm with PCC foundation 1:4:8 type D2 using 40mm graded stone aggregate 100mm thick, 100mm wide offsets alround over 100mm thick hard core, 200mm thick solid block masonry walls using 1:3:6 type C-1, built in CM 1:6, 50mm thick PCC 1:2:4 type B-1 coping finished even and smooth, rendering 10mm thick in cement mortar 1:4, finished even and smooth without using extra cement internally and externally upto 150mm below GL including top of floor including excavation earthwork in any type of soil, 3mm thick MS sheet cover fixed on 50mmx50mmx6mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handles and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50m etc., complete all as specified and as directed.

Supply and fixing of DI fitting like collar,bends, (any type any radius any angle double socketed or double flanged or socketed and spigot) Tee pieces (all socketed or all flanged or double socketed and one equal or reduced flanged branch) connecting pieces straight ( both end flanged or flanged socketed or flanged spigot equal ) or bell mounted tail pieces ( one end flanged and other end tapering either as bell mouth or flanged ) Plates, caps, blank flanges etc all type of DI specials heavy duty suitable for run lead/ rubber joints/ Flanged joint complete all as specified and as directed for size upto 150 mm dia.

EXTERNAL ELECTRIFICATION Supply and spreading in trenches river sand 8cm before laying of cable and 15cm after laying of cable including punning down, watering, conslidation etc 18cm for cable protection complete all as specified and as directed. Note:- Sand shall be measured for 18cm depth only.

Supply,Install,Testing & Commissioning of copper wound transformer step down outdoor type complete with cable end boxes at both end standard fittings, HT 11 KV 3 Phase, LT 433 volts, 3 Phase 4 wire with off load tappings on HT side to vary secondary voltage within limit, all as per IS:1180 of capacity 160 KVA BEE,5 Star incl all connected accessories complete all as specified and directed incl followings:- (a) Lifting lugs/hooks ,rollers for transformer and tank. (b) Earthing terminal and rating and diagram plate. (c) Air Release Valve. (d) oil filling inlet plug. (e) Drain outlet pipe. (f) conservator with level guage. (g) Silica gel breather. (h) first oil fill up. (i) Delta-Star Connection. (j) Type Colling

(k) Vector Group DYN11 (l) Teminal box (m) Provision of thermometer with pocket (n) Suitable foundation /Platform as per manufacturers instructions. Note:- In addition to the above all fittings to be provided as per ISI norms .

Supply and erection in position 9 Mtrs long Mild Steel 6 mm thickness GI Octagonal Pole without flanges with all accessories, base Plate etc incl fixing bolt,nut , washers etc and necessary excavation and earth work in any type of soil complete all as specified and as directed.

Supply and erection in position 7 Mtrs long Mild Steel 6 mm thickness GI Octagonal Pole with out flanges with all accessories ,base Plate etc incl fixing of MS bracket made out of flat iron 32x6mm, bolt,nut , washers etc and necessary excavation and earth work in any type of soil complete all as specified and as directed.

Material & Labour for submain wiring for Street Light fitting with two runs of 1.5 Sqmm and one run of 1.5 Sqmm as earth coninuity conductor 1100 volts grade PVC insulated unsheathed FRLS grade copper conductor cable single core multistranded ISI marked (IS-694) complete all as specified and as directed. Note:- (i)Two runs of 1.5 sqmm cable and one run of 1.5 Sqmm earth cable and one run of PVC conduit along with accessories will be measured as one unit. (ii) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

Supply and fixing Street light Luminaries LED type of 36W of Indus Series powder coated pressure die cast aluminum High power LED Street light with heat resistant toughened glass with lens & suitable for 35/40mm OD pipe ,incl suitable clamps,brakets for mounting of street light fitting and Ingress protection IP65 complete all as specified and as directed. Make:- Philips(Model:BR409LEDCW036MRFGS1PSUGR, HSN -Code 9405) or equivalent in Havells/CG.

Material and labour for, Earthing complete with galvanized steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to galvanized earth strip 32x6mm as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I connected to main board/distribution board/LT panel etc., including testing on completion complete all as specified and directed.

Note 1: The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B-1 using 20mm graded stone aggregate, 50mm thick cover slab reinforced with 6 Nos of 8mm dia TMT bars both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl. Page No. 422 of SSR Part-II. Note 2: Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.

Supply, install, test & commissioning of LT Feeder pillar box double door, outdoor type made out of 3 mm thick CRCA sheet steel weather proof vermin proof and suitable for opration on 415 volts ,50 Hz 3 Phase 4 wire AC plates ,lifting Hooks , ventilating louvers ,bus bar ,inter conncections ,earthing , labling electrical interlocking,suitable for termination of cable,and fixed on angle iron frame by means of suitable nut bolts and clamps cubical type as per IS rules with IP 65 protection with copper cable ,chromium plated brass cable gland duly painted with 2 coats synthetic enamel paint over a coat of red oxide primeand PCC for foundation ,Pedestal mounting frame of angle Iron complete all as specified.The Panel should be CPRI approved and consisting of followings:

INCOMER : (a) MCCB, 250 Amps, 25 KA 4 pole, with microprocessor release - 1 No BUS BAR CHAMBER (b) Bus bar aluminium of capacity 400 Amps for 3 ph & 200Amps for neutral mounted on epoxy insulator and insulation sleeve OUT GOINGS: (c) MCCB, 160 Amps, 20 KA 4 pole, - 2 Nos (d) MCCB, 63 Amps, 16 KA 4 pole, - 2 Nos (e) MCB, 32 Amps, 10 KA 4 pole -03 No (f) MCB 4 pole, 415 v, 10 A 10 KA for timer/ contactor and for by pass arrangement of timer/contactor for street light control - 2 Nos (g) Astro timer switch with 3 pole contractor of 16 amps rating (h) Multifunctional digital meter including all accessories to measure amperes,voltage,frequency etc (j) RYB phase indicators with control fuses

Material and Labour for post top lantern with all fittings,antiglare and uniform distribution decorative,IP-65 protection with all accessories including lamp,GI pipe ,connecting wires complete all as specified and as directed. Make:- Crompton Greaves model LPTOI-45-CDL or equivalent model of Philips/C&S/Bajaj/Havells.

COMPOUND WALL/ RETAINING WALL/ FENCING Supply & Fixing of mild steel 12mm dia TMT bars for securing chain link fencing complete all as specified and as directed.

Supply only MS galvanised chain link fencing 100x100mm apperture, 4mm dia complete all as specified and as directed.

Supply and fixing chromium plated health faucet 15mm bore with all fitings complete all as specified and as directed.

Subtotal

SACKSON ENTERPRISES

PRASHANTH ERECTOR AND BUILDERS PVT LTD

P NAIDU

AMR TRADERS

surendra infrastructure pvt ltd