REPAIR TO ROADS OF MD ACCN AND OTM ACCN AT VARIOUS LOCATIONS OF MCMM UNDER GE (EAST) JABALPUR

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and n exc 50 mm deep complete all as specified and as directed.

M&L for repairs to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water ,scoring sunken surface in roads, paths etc. cutting around edges to least 25mm in depth, making good by filling in screened & graded road metal watering and well ramming including supply of road metal complete all as specified and directed.

Preparing existing black top surface by brushing with wire brushes for removing caked mud etc.blowing with mechanical blower to remove all loose dirt etc.from surface complete all as specified and as directed.

M&L for applying evenly a priming/ tack coat of bituminous primer with bituminous emulsion @ 10 Kg/ 10Sqm by using mechanical sprayer on black top surface of road complete all as specified.

M&L for applying evenly a priming/ tack coat of bituminous primer with bituminous emulsion @ 5 Kg/ 10Sqm by using mechanical sprayer on black top surface of road complete all as specified.

M&L for premixed bituminous macadam for consolidated thickness upto 75mm or less with using 19mm graded (Grading 2) stone aggregate with minimum 4.0% binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 8 to 12 tonne tandem vibratory roller complete all as specified and directed. Notes:- (i) Premixed bituminous macadam shall be prepared in hot mix plant only. (ii) Premixed bituminous macadam shall be laid with sensor paver only. (iii) Binder content shall be tested at site as directed by Engr-in-Charge.

M&L for bituminous premixed asphaltic semi dense concrete 30mm consolidated thickness with minimum 5.5% binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 8 to 12 tonne tandem vibratory roller complete all as specified and directed. Notes:- (i) Bituminous premixed asphaltic semi dense concrete shall be prepared in hot mix plant only. (ii) Bituminous premixed asphaltic semi dense concrete shall be laid with sensor paver only. (iii) Binder content shall be tested at site as directed by Engr-in-Charge.

M&L for preparation of existing bituminous road surfaces by removing dust, dirt grease and other foreign matters etc and after prepration of road surfaces, applying road marking having minimum 2.5 mm average thickness with & including thermo plastic (Reflective) line marker paint/ compound of uniform surface finish conforming to BS 3262 (Part-I) 1989 read in conjunction with the MORTH specification 803 clause 4.2.2 on bituminous surfaces in white/ yellow colour and super imposed with glass beads conforming to BS 6088 read in conjuction with the MOST specification 803 clause 4.3.3 complete all as specified and directed. Notes:- (i) MORTH specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by GE. (ii) Shape, size & pattern of marking shall be as approved by GE.

Supply and fix 100% water proof solar flasher/ delineators pole mounting with protective cover having pole of 50 mm dia mild steel pipe of 1000 mm height duly powder coated, battery : 1.2V, 2100 mAh Ni-MH rechargeable, and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including, fixed on the ground after necessary excavation and earth work in any type of soil, embeding the delineators on the ground with & including PCC (1:2:4) type B1 using 20mm graded stone aggregate (minimum PCC block size 150mmx 150mmx 300mm for proper grouting) complete all as specified and directed.

Supply and fix in repair aluminium casted cat eye solar reflective type of metal body alloy, size 110mm x 120mm x 20mm with PAMA striplens reflector fixed with and including MS stud of suitable size as per Manufacturer's instructions complete all as specified and directed.

Supply and fix, in repair, solar cat's eye/ studs of size 125mmx 125mmx 25mm (shank 60mm) with aluminium alloy shell, high efficiency Mono-Crystalline Solar Panel 2.40V/ 0.30Watt having one Ni-Mh or NI-cd rechargable battery (1.2V/ 1600MA), Six Super Bright LEDs with 10,000 to 18,000 mcd (Millicandela) having flash rate 2 Hz and bearable weight 10 tons approx with view distance upto 1000 meters of any colour i.e yellow, red, blue, green or white as required at site, working temp 10o-75o C, working time 3 to 4 days after fully charged battery, charging time 5 to 6 hours from direct sun light, maintenance free, un-breakable poly carbonate clear facing, automatically turns on at night and turns off at dawn including all fixing arrangment as per manufactures instructions complete all as specified and directed.

M&L for moorum/ red bajri, spread in layers n exc 15cm thick, rolled and consolidated to gradient and camber as required complete all specified and directed. Note:- (i) Compacted thickness shall be measured and paid. (ii) Rolling/ compaction shall be done by vibromax roller only.

Schedule of credit amount of Rs 39,300.00 to be deducted during AOC

M/s M S Sharma and Co. (BID ID -3204194)

M/s PARASRAM MULCHANDANI (BID ID -3203661)

LAL AND SONS (BID ID -3204989)