Maintenance of Buildings Drilling of 1 No of bore well and 2 Nos 5000 ltrs Overhead tanks with connected accessories for Green House near Animal House building at South campus in UoH campus

Amount

1) The estimated amount is exclusive of GST. 2) The Bidder should quote basic rates exclusive of GST and quote GST percentage separately. GST should be revised from time to time.

Digging of bore well of 61/2 dia with Hydraulic Rig vertically in the ground (For 5 Boewells) 1 Feet to 100 Feets ( 1x100')

101 Feet to 200 Feets ( 1x100')

201 Feet to 300 Feets ( 1x100')

301 Feet to 400 Feets ( 1x100')

401 Feet to 500 Feets ( 1x100')

501 Feet to 600 Feets ( 1x100')

601 Feet to 700 Feets ( 1x100')

701 Feet to 800 Feets ( 1x100')

Transport & Labour Charges (1x4000)

Supply and fixing of PVC casing of 7'' dia 6 1/2"Bore well (75feets) Make: Sudhakar / Nandi.

Supply and fixing of PVC casing of 10'' dia 6 1/2"Bore well (15feets) Make: Sudhakar / Nandi.

Supply and fixing of HDPE pipe of 50mm dia, not less than 12.5 Kg/cm2 for bore well pump set tube well including all accessories etc., complete as required. Make: Sudhkar / Nandi.

Supply and fixing of 3 Core X 4 Sqmm under water 3 core cable for submersible pump set including jointing and connections sq.cable. Make: Finolex

Supply and fixing of 5 HP, capacity 32 stages 3 phases submersible pump and motor of 4" inches dia complete as required. Make: CRI.

SITC of Outdoor control panel with inbuild DOL starter, single phasing protection, Auto-start feature with MCB & metal stands provided as legs etc as required. Model:- MaK-1 MCB

Supply and laying of 4 coreX 10 sqmm Aluminium conductor pvc insulated armouned UG cable including excavation and providing of protecting covering and refilling the trench etc complete as required. Make : Finolex.

supply and laying of HDPE pipe of size 40 mm dia 10 kg/ cmsq. Make: Sudhakar/ Nandi.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Making connection of GI distribution branch with GI amin of following sizes by providing and fixing tee, including cuttinga nd threading the pipe etc. complete: 25 to 40 mm nominal bore

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 40 mm nominal bore Horizontal

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 25 mm nominal dia Pipes

32 mm nominal dia Pipes

Providing and fixing CPVC ball valve of following size of approved quality, High or low pressure, with plastic floats complete :32 mm nominal bore

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge