REPAIRS TO PATHS, HARDSTANDING, CULVERTS, FENCING AND MISC WORKS AND REPAIRS/ CLEANING OF SEWAGE LINES, MANHOLES, SOAKAGE WELLS AND SEPTIC TANKS AT ALONG MIL STN UNDER GE 872 EWS

Amount

DEMOLITION & DISMANTLING

Demolition Cement Concrete (Un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

Demolition Cement Concrete (Reinforced) in any Position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition) and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

Demolition Brick Work, Pre-cast Concrete Block Masonry, built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.

Dismantling Mild Steel Work including Doors, Gates but excluding Framed Truss, etc. of any description including Serviceable Mild Steel keep in Safe Custody for Re-use at Site (if any ordered), complete all as specified and as directed

Dismantling Fencing Wire Mesh of any description including Serviceable Chain Link Fencing Keep in Safe custody for Re-use at Site, complete all as specified and as directed.

Dismantling Barbed Wire of any description, Segregating the Serviceable Barbed Wire and Stacking properly at Sites and Keep in Safe Custody for Re-use, complete all as specified and as directed. NOTE : Each Line of Barbed Wire will be Measured for Payment.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

Dismantling Stone Slabs, Paver Blocks of any description or thickness, laid dry or laid dry and pointed including Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

Taking down/up Unserviceable PVC (SWR) Soil, Waste and Ventilating Pipes 75/110mm bore (dia) but except Pipes Fittings of any descriptions, fixing on Walls or laid in Floors, etc., complete all as specified and as directed.

Demolition & Breaking up Drain/ Seware Pipe 100/110mm dia (PVC (SWR), Salt Glazed Ware, AC or Reinforced Concrete) including PCC Haunching (except Bed), set in Cement Mortar, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items.

Demolition & Breaking up Drain/ Seware Pipe 150/160mm dia (Salt Glazed Ware, AC or Reinforced Concrete) including PCC Haunching (except Bed), set in Cement Mortar, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items.

EARTH WORKS

Excavating in Trenches, not exc. 1.50 Metre wide and not exc. 1.50 Metre in Depth; for Foundation, etc. or for Shafts, Wells, Cesspits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in Depth and getting out in Soft/Loose Soil, complete all as specified and as directed.

Returning, filling in approved Soft/Loose Soil including Spreading Leveling, Watering and Well Ramming in Layers not exc. 25 Cm thick, complete all as specified and as directed.

Removing Excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point including spreading over ground, complete all as specified and as directed.

REPAIRS TO DRAINS, COMPOUND WALLS, FENCING & SEWAGE

M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) in Surface Channels and Drains, etc. including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed. NOTE : Cost of Formwork will deemed to be included in the Quoted Unit Rate.

M&L Extra for Forming Fair finished Drain or Channel not exc. 30 Cm Inner Girth in Cement Concrete, using Extra Cement including Forms, Moulds, Stopped Ends, etc., complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed. NOTE : Cost of Formwork will deemed to be included in the Quoted Unit Rate.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregates) in Lintels upto 1.50 Metre Clear Span, Cills, Steps; Seismic and Other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets and Railings upto 600mm in Height, Copings, Kneelers, Apex Stones, Bed Plates, Water Troughs and the Like including Weathering, Slightly Rounded or Chamfered Angles and Throating, Finishing all Exposed Faces of Concrete including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed. NOTE : Cost of Formwork will deemed to be included in the Quoted Unit Rate.

M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Landings, Cover Slabs (for Manholes, etc.), Chullah Hoods, Chajjas, Water Troughs, Mangers, Shelves and Similar Articles with Plain faces and setting in Cement Morter 1:6, complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid for separately under appropriate Items.

M&L Machine Made & Pressed Pre-cast Cement Concrete Block Masonry with Solid Blocks of Size 300x200x200mm or 300x200x100mm, having Compressive Strength of not less than 100 Kg/ Sq Cm (as per IS-2185) in Cement Concrete 1:3:6 (20mm graded stone aggregate), exc. 10 Cm in Width and Setting in Cement Mortar 1:6, complete all as specified and as directed.

M&L TMT Bars 10mm dia and Over, Cut to length, Bent to Shape required including Cranking, Bending Spirally for Hooping for Columns, hooking Ends and Binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L Rolled Mild Steel Framed Work in Doors or Gates of Angle or Other Section with Gusset Plates, Rails, Braces, etc., complete, drilled for fixing of Steel Sheeting or Other Covering. Doors, etc. to be prepared for Hanging or Sliding with and including either Hooks and Hinges or Steel Hanging Door Fittings (Exclusive of Steel Sheeting or Other Covering, Running Rails and Guides) and Hanging; also Fastening and Fixing, conforming to Fe-290 (Gde E-165), complete all as specified and as directed.

M&L Mild Steel Works such as Posts and Struts in Fencing including cutting Tops to shape as directed, drilling holes, notching for Wire, etc.; including all necessary drilling, bolting or riveting, etc. and similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed.

M&L Mild Steel Flat Iron 40x4.0mm (Fillet for securing Wire Mesh, etc.), cut to length including all necessary drilling, bolting or riveting, etc. and Similar Work, conforming to Fe-290 Gde E-165, complete all as specified and as directed.

Re-fixing only Mild Steel Flat Iron (Serviceable Mild Steel Flat Iron obtained from Item No. 1.04 here-in-before) of any description (Fillet for securing Wire Mesh, etc.) cut to length including all necessary drilling, bolting or riveting, etc. and Similar Work, complete all as specified and as directed.

M&L Mild Steel Round Bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

Re-fixing only Mild Steel Round Bars 10mm dia and over (Serviceable Mild Steel Round Bars obtained from Item No. 1.04 here-in-before) cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L Mild Steel Screw Bolts (machine made) 11mm to 15mm diameter of Neck and length of Bolt exc. 5.0 Cm and not exc. 10 Cm with Hexagonal or Square Heads at One End and screwed the Other End, or screwed Both Ends, Each screwed End to be fitted with Washers and One Hexagonal or Square Nut, complete all as specified and as directed.

Supply only Chain Link Fencing 75x75mm or 100x100mm Mesh with 3.15/4.0mm dia Mild Steel Galvanised Wire, complete all as specified and as directed.

M&L for Fixing only New Chain Link Fencing including Line Wires, any Mesh, Size and type to any type of Standards, Rails, Straining Bolts, etc. including Provision of Mild Steel Binding Wire (annealed) not less than 0.90mm dia, complete all as specified and as directed.

S&F Galvanised 2 Strand, Steel Barbed Wire 2.24mm dia Barbed with 2.0mm dia Barbs at 75mm Spacings and Straining and Fixing to any type of Standard Rails, Straining Bolts, Securing or Tying at Crossings with and Provision of Galvanised Mild Steel Wire, Staples or Steel Pins, etc., complete all as specified and as directed. NOTE : Each Line of Barbed Wire will be Measured for Payment.

Re-fixing only Galvanised 2 Strand, Steel Barbed Wire 2.24mm dia Barbed with 2.0mm dia Barbs at 75mm Spacings (Serviceable MBarbed Wire obtained from Item No. 1.04 here-in-before), Restraining, Resecuring including Making Good Staples, etc. and Fixing to any type of Standard Rails, Straining Bolts, Securing or Tying at Crossings with and Provision of Galvanised Mild Steel Wire, Staples or Steel Pins, etc., complete all as specified and as directed. NOTE : Each Line of Barbed Wire will be Measured for Payment.

M&L Machine Cut Granite (of any type) Work 20mm thick (Table Rubbed and Polished) in Steps, Jambs, Pillars, Window Cills, Cooking Platform and like in Cement Mortar 1:4 including Pointing in White Cement 1:2, using Marble Dust with admixture of Pigment to match with Shade of Granite, fixing over and including Cement Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregates) 75mm thick in Sub-base of Path, Hardstanding, etc., complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregates) 100mm thick in Path, Hardstanding, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smooth ithout Using Extra Cement, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregates) 40mm thick in Flooring, Path, Paving, etc., Laid in Alternate Panels, finished Concrete Surfaces Fair and Even, complete all as specified and as directed.

M&L Floor (Paver) Tiles 300x300x9 to 10mm, highly abrasive, Anti-skid, Impact Resistance, laid over and including 15mm thick Cement Screed Bed in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate.

M&L Chequered Cement Concrete Coloured (Terracota Red) Tiles 200x200x25mm thick, Set and Jointed in Neat Cement Slurry in Floors and Pointed in Grey Cement, laid over and including 15mm thick Cement Screed Bed in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate.

M&L Machine Pressed Pre-cast Concrete Interlocking Paver Block 80mm thick of M-40 Grade, with Grey Cement and Pigment of any Shape and Size (as ordered), conforming IS-15658-2006, ISI Marked, laid dry over Clean dry Sand and grouted with Clean dry Sand in Floors, complete all as specified and as directed. NOTE : Clean dry Sand will be Measured and Paid separately under appropriate Item.

M&L Sand Filling under Pre-cast Concrete Paver Blocks including Watering (if any ordered) and Consolidation, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without Using Extra Cement, complete all as specified and as directed.

M&L Preparing New Steel and Iron Surfaces of any description, over 10 Cm in Width or Girth, not otherwise described and applying Two Coats of Synthetic Enamel Paint (1st Grade/ Quality) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L Preparing New/Old Steel and Iron Surfaces of any description, not exc. 10 Cm in Width or Girth, not otherwise described and applying Two Coats of Synthetic Enamel Paint (1st Grade/ Quality) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L Preparing New Steel and Iron Surfaces of any description, over 10 Cm in Width or Girth, not otherwise described and applying Two Coats of Black Bituminous Paint (as approved) over a Coat of Red Oxide Zinc Chrome Primer complete all as specified and as directed.

S&F PVC (SWR) Floor Trap 75mm bore (dia) with Chromium Plated Grating, Plain including jointing to Waste Pipe with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) Gully Trap 125/110mm bore (dia), setting and jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, fixing on Walls or on Floors, etc., complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Bends (any Radius), Diminishing Pieces or Tapers (Larger bore measured) Fittings for PVC (SWR) Pipe, Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Junction, Single (Single T) Equal or Unequal with Access Door, etc., Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Vent Cowl 75mm bore (dia), Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, fixing on Walls or on Floors, etc., complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Bends (any Radius), Diminishing Pieces or Tapers (Larger bore measured) Fittings for PVC (SWR) Pipe, Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Junction, Single (Single T) Equal or Unequal with Access Door, etc., Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any Length with PVC/Rubber Ring Joints, with or without Ears, laid in Trenches, etc., complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items.

S&F PVC (SWR) 160mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any Length with PVC/Rubber Ring Joints, with or without Ears, laid in Trenches, etc., complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) in Concrete Bed to Drain Pipes of 110mm bore (dia) including Packing Under and Haunching against the Sides of Pipes after they are laid and tested; complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) in Concrete Bed to Drain Pipes of 160mm bore (dia) including Packing Under and Haunching against the Sides of Pipes after they are laid and tested; complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items.

M&L Cutting into Existing Manholes for Connecting New Drain Pipes of 110mm (Internal dia), Making Good to Pipe and Rendering, Cutting out Existing Benching for and Forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregate), Smooth Finished and Reforming Benching as required, complete all as specified and as directed.

M&L Cutting into Existing Manholes for Connecting New Drain Pipes of 160mm (Internal dia), Making Good to Pipe and Rendering, Cutting out Existing Benching for and Forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregate), Smooth Finished and Reforming Benching as required, complete all as specified and as directed.

M&L Loose Filling with Using Broken Stones or Boulders of Gauge 80mm to 150mm in Soakage Pits/ Soakage Wells, etc., complete all as specified and as directed.

CLEANING TO SEWAGE SYSTEMS

M&L Removing and/or Cleaning Blockage of Floor Trap, Nahani Trap, etc. of any description by any means of Flushing with Water, complete all as specified and as directed. NOTE : The Item is Measurable/Operative upto THRICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.

M&L Removing and/or Cleaning Blockage of Water Closet (WC) of any description by any means of Flushing with Water, complete all as specified and as directed. NOTE : The Item is Measurable/Operative upto THRICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.

M&L Removing/Cleaning Blockage of Sewer Line 100/110mm bore (dia), manually by rodding from Manholes, Septic Tank, etc. and Cleaning of Sewer Line by flushing with water, complete all as specified and as directed. NOTE : The Item is Measurable/Operative upto THRICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will be liable to Clean the same without any Extra Cost.

M&L Removing/Cleaning Blockage of Sewer Line 150/160mm bore (dia), manually by rodding from Manholes, Septic Tank, etc. and Cleaning of Sewer Line by flushing with water, complete all as specified and as directed. NOTE : The Item is Measurable/Operative upto THRICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will be liable to Clean the same without any Extra Cost.

M&L Cleaning GULLY TRAP, Depth not exc. 0.50 METRE by Opening Cover and Taking out accumulated Garbage, Brick Bats, Silts or any other Items, Re-fixing the Cover after Cleaning of Gully Trap, Removing and Carrying Brick Bats, Garbage, Silts, etc. to a distance exc 50 Metre but not exc 100 Metre and burried (minimum 450mm below Normal Ground Level), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit including Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required/ordered at Site), complete all as specified and as directed. NOTE :- (a) The Item is Measurable/Operative upto THRICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. (b) Cost of Bleaching Powder, necessary Earth Works, Materials, T&P, etc. required for Cleaning will deem to be included in the Quoted Unit Rate.

M&L Cleaning MANHOLE, Depth not exc. 0.50 METRE, by Opening Cover and Taking out accumulated Brick Bats, Garbage, Silts or any other Items, Re-fixing the Cover after Cleaning of Manhole, Removing and Carrying Brick Bats Garbage, Silts, etc. to a distance exc. 50 Metre but not exc. 100 Metre and burried (minimum 450mm below Normal Ground Level), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit including Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required/ordered at Site), complete all as specified and as directed. NOTE :- (a) The Item is Measurable/Operative upto THRICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. (b) Cost of Bleaching Powder, necessary Earth Works, Materials, T&P, etc. required for Cleaning will deemed to be included in the Quoted Unit Rate.

M&L Dewatering Sewage Water and Taking out accumulated Night Soils, Sludges, Brick Bats or any other Materials mechanically by HCV Mounted Suction Discharge Machine having Blow Back Facility with Sludge Tank (minimum 2000 Litre capacity) from MANHOLES, SEPTIC TANKS, etc., (Depth not exc. 1.50 METRE) as required to keep Complete Sewage System Functional and To avoid any Over Flowing including Removal and Dispossed off pumped out Sewage Water, Sludges in any form or any other Materials, etc. to Outside of Defence Land to a distance exc. 500 METRE and not exc. 1.00 KM and burried Under Ground (minimum 450mm covered with Soils over Two layers of Bamboo Matting without maintaining gap), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit as ordered by JE and/or Engineer-in-Charge so as to keep the Whole Station Area Pollution Free, complete all as specified and as directed. NOTE :- (a) The Item is Measurable/Operative only ONCE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. (b) Each Trip of Tanker to be taken Outside of MD Land in presence of JE-in-Charge. (c) Cost of Bleaching Powder, Bamboo Matting, all necessary Earth Works, any other Materials and T&P, etc. as required for Cleaning and Removal will deemed to be included in the Quoted Unit Rate.

M&L Dewatering Sewage Water and Taking out accumulated Night Soils, Sludges, Brick Bats or any other Materials mechanically by HCV Mounted Suction Discharge Machine having Blow Back Facility with Sludge Tank (minimum 2000 Litre capacity) from MANHOLES, SEPTIC TANKS, etc., (Depth exc. 1.50 METRE and not exc. 3.00 METRE) as required to keep Complete Sewage System Functional and To avoid any Over Flowing including Removal and Dispossed off pumped out Sewage Water, Sludges in any form or any other Materials, etc. to Outside of Defence Land to a distance exc. 500 METRE and not exc. 1.00 KM and burried Under Ground (minimum 450mm covered with Soils over Two layers of Bamboo Matting without maintaining gap), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit as ordered by JE and/or Engineer-in-Charge so as to keep the Whole Station Area Pollution Free, complete all as specified and as directed. NOTE :- (a) The Item is Measurable/Operative only ONCE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. (b) Each Trip of Tanker to be taken Outside of MD Land in presence of JE-in-Charge. (c) Cost of Bleaching Powder, Bamboo Matting, all necessary Earth Works, any other Materials and T&P, etc. as required for Cleaning and Removal will deemed to be included in the Quoted Unit Rate.

M/S A K ENTERPRISE

M/S CHANDAN ENTERPRISE

Kaushik Enterprises