LIFT IN H-BLOCK OF GH ADUKKAMPARAI

Amount

Renewal by Design, Engineering, Supply, Fabrication, Erection, Testing, commissioning and handing over of 1 no 13 Persons Passenger Lifts as per the following specifications.(Gearless Lift with Machine Room)1.Location: H- Block at Govt. Vellore Medical College and Hospital, 2.No of lift: one no. (Gearless), 3.Type of lift: passenger, 4.Capacity of lift: 13 persons / 884 Kgs, 5.Speed: 1.0 M / Sec, 6.Type of drive: V3F drive with enhanced ride comfort and near zero level functions, 7.No of floors: GF+3 Floor, 8.Total travel: 3.3 mts x 3 Landing =9.9 mts, 9.Leveling accuracy: high level accuracy with smooth and jerk free stopping, 10.Construction of CAR: No. 4 hardened sheet high quality stainless steel car and hand rail granite flooring and Perspex false ceiling., 11. Position of machine: directly above the lift well., 12. No of landing service: One in the front side- 1 no., 13. No. of car entrance: one in the front side only, 14. Car entrance door: power operated automatic V3F drive center opening sliding SS door, 15.Landing entrance door: power operated V3F drive center opening sliding SS door with provision for emergency exit key at all landings., 16.Lift well :1650 mm (wide) X 2800 mm (depth) as per IS 14665(part1) 2000 to be constructed by PWD civil wing., 17.Lift pit depth:1600 mm, 18. Car inner size: 1000 mm (width)x2000 mm (depth) as per IS 14665 (part 1 )2000,over head 4200mm and Total weight of person – 680 Kg, 19. Car clear opening: 1000 mm wide x 2000 mm height as per IS 14665 (part 1)2000, 20.Lift machine room size: as per ISI 14665 (part 1) 2000 to be constructed by PWD civil wing over the lift well, 21. Power supply: 400 / 440 v three phase 50 Hz AC supply for power and 230 V 50 Hz single phase power supply for light.,

22.Control: micro computer (micro processor):based simplex collective control with / without attendant, 23.Car fittings: CFL lighting with 1 no 300 mm sweep cabin fan., 24.Lift well: RCC construction with brick masonry to be constructed by PWD civil wing., 25.Induction: UP / DOWN digital direction and position indicator for all landings and inside the car., 26.Emergency alarm bell: battery operated bell to be provided with automatic charging device, 27.Emergency light: battery operated light to be provided with automatic charging device, 28.Fire mans switch: to be provided at the GF, 29.Minor builder works: to be provided by the lift contractor., 30.Scaffoldings: to be provided by the lift contractor., 31. Sill angles and facia plates: SS to be provided by the lift contractor., 32.Steel for lift machinery: to be provided by the lift contractor., 33.Servicing and maintenance: free comprehensive servicing and maintenance for one year Guarantee period to be provided by the lift contractor., 34.Automatic rescue device: to facilitate the landing of the nearest floor at the time of power failure this shall consist of suitable battery system with charger inverter under voltage protection system etc. complete with all accessories., 35.Provision for intercom with phone: to be provided by the lift contractor., 36.Lift license: preparation of drawings payment of charges to CEIG and insurance policy if any and obtaining CEIG approval for the lift as per lift act should be done by the lift contractor, 37.Floor position announcer: to be provided by the lift contractor., 38.Special features : a) Infra red door sensor with full height screen, b) Full width half height rear panel mirror, c)Tubular SS hand rail in car, d) Stainless steel signal features, e) Vandal proof SS button with SS cover,

f) SS door frames for landing doors, g) V3F door operator, h) Call register signal, i) Stainless steel facia plates for car operating panel and landing fixtures, j) Steel ladder for lift machine room, k) On / off switch for fan and light, l) Over load warning indicator with audio announcer, m)Voltage stabilizer for control circuits, n)Braille button, 39.Over speed governor phase failure and phase reversal relay alarm bell T guide brackets for car and counter weight rubber padding under the winding unit motor of adequate capacity signal reduction worm gear electromagnetic brake with compression springs car safety gears buffers electro mechanical locks emergency key side supporting angles motor over load protection devices final limit switch main suspension ropes counter weight lifting joist for mounting the machineries, 40.Guarantee: guarantee at least for one year for the material and workman ship of equipments should be offered by the lift contractor., 41. Site testing in accordance with IS 14665 should be carried out at the time of handing over to the user department, 42. Supply operation and maintenance manual and necessary tools for operation and a set of Spare parts required for one year.

Renewal by Design, Engineering, Supply, Fabrication, Erection, Testing, commissioning and handing over of 1 no 26 Bed-Cum passenger lift as per the following specifications including taxes and duties.(Gearless Lift with Machine Room ), 1.Location: H- Block at Govt. Vellore Medical College and Hospital, 2.No of lift: one no. (Gearless), 3.Type of lift: Bed-Cum passenger, 4.Capacity of lift: 26 persons / 1768 Kgs, 5.Speed: 1.0 M / Sec, 6.Type of drive: V3F drive with enhanced ride comfort and near zero level functions, 7.No of floors: GF+3 Floor, 8.Total travel: 3.3 mts x 3 Landing =9.9 mts, 9.Leveling accuracy: high level accuracy with smooth and jerk free stopping, 10. Construction of CAR: No. 4 hardened sheet high quality stainless steel car and hand rail granite flooring and Perspex false ceiling., 11.Position of machine: directly above the lift well., 12.No of landing service: One in the front side- 1 no., 13. No. of car entrance: one in the front side only, 14.Car entrance door: power operated automatic V3F drive center opening sliding SS door, 15. Landing entrance door: power operated V3F drive center opening sliding SS door with provision for emergency exit key at all landings., 16.Lift well :2200 mm (wide) X 3000 mm (depth) as per IS 14665(part1) 2000 to be constructed by PWD civil wing, 17.Lift pit depth:1600 mm, 18.Car inner size: 1600 mm (width)x2400 mm (depth) as per IS 14665 (part 1 )2000,over head 4200mm and Total weight of person – 680 Kg, 19.Car clear opening: 1100 mm wide x 2000 mm height as per IS 14665 (part 1)2000, 20.Lift machine room size: as per ISI 14665 (part 1)2000 to be constructed by PWD civil wing over the lift well, 21.Power supply: 400 / 440 v three phase 50 Hz AC supply for power and 230 V 50 Hz single phase power supply for light,

22.Control: micro computer (micro processor):based simplex collective control with / without attendant, 23. Car fittings: CFL lighting with 1 no 300 mm sweep cabin fan., 24. Lift well: RCC construction with brick masonry to be constructed by PWD civil wing., 25. Induction: UP / DOWN digital direction and position indicator for all landings and inside the car., 26.Emergency alarm bell: battery operated bell to be provided with automatic charging device, 27.Emergency light: battery operated light to be provided with automatic charging device, 28.Fire mans switch: to be provided at the GF, 29.Minor builder works: to be provided by the lift contractor., 30.Scaffoldings: to be provided by the lift contractor., 31.Sill angles and facia plates: SS to be provided by the lift contractor., 32.Steel for lift machinery: to be provided by the lift contractor. 33.Servicing and maintenance: free comprehensive servicing and maintenance for one year Guarantee period to be provided by the lift contractor., 34.Automatic rescue device: to facilitate the landing of the nearest floor at the time of power failure this shall consist of suitable battery system with charger inverter under voltage protection system etc. complete with all accessories., 35.Provision for intercom with phone: to be provided by the lift contractor., 36.Lift license: preparation of drawings payment of charges to CEIG and insurance policy if any and obtaining CEIG approval for the lift as per lift act should be done by the lift contractor, 37. Floor position announcer: to be provided by the lift contractor., 38.Special features: a) Infra red door sensor with full height screen, b) Full width half height rear panel mirror, c)Tubular SS hand rail in car, d) Stainless steel signal features, e) Vandal proof SS button with SS cover, f)SS door frames for landing doors,

g)V3F door operator, h)Call register signal, i)Stainless steel facia plates for car operating panel and landing fixtures, j)Steel ladder for lift machine room, k)On / off switch for fan and light, l)Over load warning indicator with audio announcer, m)Voltage stabilizer for control circuits, n)Braille button, 39.Over speed governor phase failure and phase reversal relay alarm bell T guide brackets for car and counter weight rubber padding under the winding unit motor of adequate capacity signal reduction worm gear electromagnetic brake with compression springs car safety gears buffers electro mechanical locks emergency key side supporting angles motor over load protection devices final limit switch main suspension ropes counter weight lifting joist for mounting the machineries, 40.Guarantee: guarantee at least for one year for the material and workman ship of equipments should be offered by the lift contractor., 41.Site testing in accordance with IS 14665 should be carried out at the time of handing over to the user department, 42.Supply operation and maintenance manual and necessary tools for operation and a set of Spare parts required for one year.

Rewiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) 5 points / coils Higher End

Renewal by Supply and fixing of single box type 4' 20 W LED fitting complete with TW round blocks on wall or ceiling with 20 W LED tube light with Single side connection with PVC unsheathed Copper leads from terminals to the fitting. ( Havells /Crompton/equivalent)

Renewal by Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL.

Renewal by Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300mm down rod with necessary clamps

Renewal by Supply and fixing of 300 mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Renewal by Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan

Renewal by Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box (Plastic) with module cover plate (plastic) on wall with connections. Higher End

Renewal by Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Renewal by Supply and fixing of Sheet Steel enclosure Box with 100 4pole MCB in flush with wall with earth connection [Legrand (MDS) / Hager (L&T) make]

Renewal by Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour.

Renewal by Supply and clarnping of 3.5x70sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Renewal by Supply and frxing of brass cable gland for 3 1/2x70sqmm PVC armoured LTUG cable with earth connection

Renewal by Supply and providing cable end termination of 3-1/2x70sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Renewal by Supply and run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall and ceiling for earth connection

SURESHBABU (BID ID -1470580)

E DHANASEKARAN (BID ID -1470623)