15TH FIN TIED GRANT Maintenance of Community Toilet at Ward no08 Mythankarai and Ward No8 Bypass Road toilet in Komaralingam town panchayat

Amount

Dismantling the damaged Floor finish and dadooing walls in Cement Mortar with Mosaic tiles/ glazed tiles/ cuddapah slabs. complete. complying with std. specifications.

Clean removal of cement plaster from walls and racking out joints 20mm deepc etc., complete complying with standard specifications as directed by departmental officers etc., complete.

Plain Cement Concrete 1:4:8 Mix (one part cement, Four part M.sand and Eight part of aggrigate) using 40mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Brick Work in Cement Mortor 1:5 Mix (one cement, five M.sand) using best II Class Ground mould Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. (TNDSS NO:31 & similar to 31C V, VI (S5) VII)

Supplying and erecting centering for sides and soffits including supports and strutting upto 3.00m height for plane surface such as RCC Slab, Rectangular Beams, Tee (or) ELL Beams, Lintel Bed Block, Slabs, Landing Slabs, Beams Canopy, Side Slab (or) Square (or) Round columns etc., as detailed below with all cross branching using M.S. Sheets of size 80cm x 60cm and B.G. 10 stiffended with welded M.S. Angles of size 25 x 25 x 3mm for boarding laid over silver oak or country wood joints of 10cm to 30cm to dia spaced at 75cm c/c etc., complete complying with standard specifications as directed by departmental officers etc., complete.

Supplying fabricating and placing in position of steel rods using TMT. or Ribbed Tor Steel including cost of binding wire, cost of labour charges for fabrication and placing in position etc. Complete. Complying with std. specifications.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Plastering with cement mortar 1:5 thick 12mm including cost and conveyance of all labour and materials charges to site etc.. Complete complying with standard specifications.

Plastering with cement mortar 1:3 thick 10mm including cost and conveyance of all labour and materials charges to site etc.. Complete complying with standard specifications.

Dadooing of walls with colour glazed tiles of size 300x200x6 mm finished thickness with c.m 1:2- and polished with same color cement including all cost and convene of all materials etc.,complete

Floor finishing with ceramic tiles of size 30cmx30cmx6mm finished thickness with c.m 1:3-20mm Tk and polished with same colour cement including allcost and convence of all meterials etc.,complete as per std.,specifications.

Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 40mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Weathering course concrete with broken brick jelly of 20 mm gauge in pure slacked lime ( no sand to be added) over roof slab the proportion of brick jelly to lime being 32 to 12.5 by volume and laid over In a single layer and consolidated require designed and finished thickness by beating the concrete with wooden beaters of approved pattern , keeping the surface constantly welded springing lime jiggery water asper standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 20 x 20 x 2 cm laid in cement mortar ( One of cement and three of sand ) mixing with water proofing compound conferment ISS at 2% weight of cement used and pointed with same waterproofing compound mixed with red oxide etc., complete with standard specification

Supply and fixing in position 22" Indian type water closet with foot reset includes "P" (or) "S" trap including cost and conveyance of all materials to site and all labour charges etc., to complete as per std.,specifications.

Supplying delivery of 2000 lts PVC Tank including cost and conveyance of all other labour and materials charges to site etc., complete complying with standard specifications.

Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam. Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug

Supplying fixing of Steel grill gate and including cost and conveyance of materials and fixing of all labour charges & all etc.. complete..

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications

Painting two coats for iron works using best enamal paint including all cost and conveyance of all materials and labour chargsetc., complete

Wiring with 2x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade insuitable heavy gauge MSconduit pipe on wall and ceiling with MS accessories with MS switch Box and 5A FT switch with painting of suitable colour continuous earth wire connection of 14SWG TC wire for light point / fan point (for electronic regulator) SD-19

Geophysical Survey Charges

Supply and erection of 150 mm dia PVC causing pipe ete., complete

Drilling 150 mm Deep Borewell with including cost and conveyance materials all labour charges etc., complete up to 12m

Supply and Delivery of Upvc pipe,4Sqmm Cable, Gi pipes and 3.00 HP Three Phase Submersible mortar including cost and conveyace of all labour charges etc., complete 1) 5.00 HP Submersible Motor with Panel Board (75 LPM, 175 m Head)(69159+16480)=85639

2) 50 mm UPVC pipes

3) 4 Sq.mm. 3Core cables

4) 50mm GI pipes

Supply of 63 mm dia PVC PIPE 6 Kg/cm2 including all cost and conveyance.

Conveying of PVC right pipe to trench with in a lead of 200m lowering in to a trench carefully laying to proper grad and alignment jointing with PVC couplers with cement paste and testing to the requited pressure including conveyance of water upto 1.00km

Lowering GI pipes and specials in the trenches and laying to proper grade and alignment and as directed by the TWAD officers

Refilling with excavated earth other than sand complying with standard specification.

Labour charges for the erection of Submercible pumpset in Borewell or open well inculding Fixing and jointing submersible cable withproper clamps upto the starter to reqired depth and al so fixing of riser pipes to the required depth valves, erection clamps, pressure gagues upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps, capacitor single phasing preventor, waqter level guard and laying and jonting the cables and twin earthing as per IE rules etc., complete and testing the pump set and trail run for 10 days. (up to 5 HP Motor)

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,

anandhi (BID ID -1208308)