SPL REPAIR TO QTR NO P-09/01-08 (MD ACCN) AT JOGINDER SINGH ENCLAVE AT OLD AMRITSAR CANTT

Amount

Dismantling of roof brick tiles fixed in cement mortar in single layer ; Complete all as specified and directed.

Demolition mud phuska in roofs any thickness including plastering and leeping, removing debris and rubbish from the site Complete all as specified and directed.

Material and Labour for Cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in roof padding (average 40mm thick), roof kerbs or mud stops, rounded or chamfered on edge ; Complete all as specified and directed.

Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application over a tack coat of industrial bitumen 85/25 at the rate of 1.6 kg per sq.m including cleaning surfaces and including 10 mm thick 1: 4 cement plaster on padding surface ; Complete all as specified and directed.

Material and labour for 40 mm thick brick tiles laid over and including 15mm thick bedding layer in cement mortar 1:6 and jointed, grouted and flush pointing as work proceed in CM 1:3 complete all as specified.

All as per Srl item above here-in-before but except tiles.Note : (i) Serviceable brick tiles obtained from shall be reused.

Material and Labour for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in bed blocks for hold fast & similar work etc ; Complete all as specified and directed.

Taking down cement plaster on brick, concrete or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. of any description , removing debris and rubbish from the site ; Complete all as specified and directed.

Material and Labour for 12mm thick cement plastering in cm 1:6 on brick or concrete surfaces other than fair surface, finished the surfaces even and fair without using extra cement ; Complete all as specified and directed.

Material and Labour for 5 mm thick cement plastering in CM 1:3 on ceiling surfaces other than fair surface, finished the surfaces even and fair without using extra cement ; Complete all as specified and directed.

Material and Labour for Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:4 and to be finished even and smooth ( without using extra lime or cement) including WPC @ 3 % weight of cement etc. ; Complete all as specified and directed. Note : WPC will be measured and paid separately under appropriate items.

Material and Labour Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including preparation of new surfaces ; Complete all as specified and directed.

Material and Labour for Acrylic Smooth exterior paint of required shade : old surface (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including preparation of old surfaces ; Complete all as specified.

Supply only integral water proofing compound confirming to IS-2645 complete all as specified and directed.

Material and Labour for preparation of new plaster surface and applying two coats of Oil bound distemper of wall over a coat of primer on wall surfaces ; Complete all as specified and directed.

Material and Labour for preparation of new plaster surface and applying two Coat white wash on wall over a coat of primer ; Complete all as specified and directed.

Material and Labour for preparation of new plaster surface and applying two coat of white wash on ceiling ; Complete all as specified and directed.

Material and Labour for Complete removal and preparation of existing treatmnet of plastered surfaces on walls applying two coats of Oil bound distemper over a coat of primer ; Complete all as specified.

Material and Labour for one coat of white wash on old treated plastered surface on walls of undecorated surfaces ; Complete all as specified and directed.

Material and Labour for one coat of white wash on old treated plastered surface on ceiling of undecorated surfaces ; Complete all as specified and directed.

Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats ) ; Complete all as specified and directed.

Taking down chowkats with shutter exc 1.50sqm but n.exc 4 Sqm (including CB shutters with chowkhat) ; Complete all as specified and directed.

Supply and Fixing of pressed steel frames 1.25mm thick for door size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges including Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, ; Complete all as specified and directed.

Supply and Fixing of pressed steel frames 1.25mm thick for door size of frame 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges including Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, ; Complete all as specified and directed.

Supply and Fixing of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, including necessary fittings , MS steel hinges and screws , supply & fixing in opening as per specification & drawing ; Complete all as specified and directed.

Supply and Fixing of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supply & fixing in the frame at site as per specification & drawing including including necessary fittings , MS steel hinges and screws etc . ; Complete all as specified and directed.

Supply and Fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.

Supply and Fixing of factory made 35 mm thick flush shutters solid core construction with block board core and plywood face panels. Commercial type on both side ; Complete all as specified and directed.

Supply and Fixing of IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats ; Complete all as specified and directed.

Supply and Fixing of mild steel work Fe 410-W(Gde-E- 250) quality-A Fe in framed work as in door frame, shutter or gates of angle iron or other section with gusset plates,rails,braces etc complete drilled for fixing of steel sheeting or orther covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening ; Complete all as specified and directed.

Supply and Fixing of Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples ; Complete all as specified and directed.

Supply and fixing18 mm thick PVC board as in cupboard shelves, in kitchen cabinet etc ; Complete all as specified and directed.

Supply and Fixing aluminium anodised barel tower bolt of extrud sec 150mm long ISI marked. ; Complete all as specified and directed.

Supply and Fixing extruded aluminium alloy handle fabricated type anodized of size 150 mm long ISI marked. ; Complete all as specified and directed.

Supply and Fixing 300mm long aluminium alloy,anodised ,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded sectionsor cast aluminium alloy ; Complete all as specified and directed.

Supply and Fixing 300mm, mild steel ordinary rat tail rod pattern springs,including roller and roller plate ; Complete all as specified and directed. Note : repairs required on steel door frame, welding to be carried out or necessary alternative arrangements to be done.

Supply and fixing Steel window 1.25mm thick box type ERW hollow P section of each frame size 60mmx25mm double rebated comprises of glazed & gaused Skelton shutter ERW section 50mmx20mm & 1mm thick with one openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1.25mm thick with following fittings welded to the frame shutter :- Ref Drg No CE JZ/TD-06/07 i) Hold fast 150mm long mild steel flat iron 12x3 mm made to shape- 04 Nos per window ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii) MS tower bolt 150mm long 2 No per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 Nos per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 Nos per leaf vi) pintol hinges 12 x 75 mm - 2 Nos each leaf

Supply and fixing in repair mild steel box type ventilator fixed type with glazing bar with mesh & glass as per drg No. CEJZ/TD-06/07 dt 07.06.07 primer coated complete all as spd.

Supply and fixing 3mm thick ordinary sheet glass and glazing with oil putty or fixed on steel frame, in squares not exc 0.50 Sqm in each panes complete all as specified.

Supply and Fixing mild steel framed work such as grills,grating ,etc with ends of bars , just as in doors, ventilators, and as in hold fast,ladders,railings,Framed Guard bar ,railings etc with ends of bars shouldered and/or riveted complete welded hinged and similar work Conforming to Fe-290 Gde-E-165 ; Complete all as specified and directed.

Supply and Fixing figured glass pin head type, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty ; Complete all as specified and directed.

Supply and Fixing rotational moulded polytheylene triple layered white water storage tanks of capacity 500 Litres (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing water tank and 20mm dia brass float valve with brass rod ; Complete all as specified and directed.

Supply and Fixing in repairs of stop value 20mm bore cast copper alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc ; Complete all as specified and directed.

Taking up and down GI pipe 15mm bore including fittings, connection, including cleaning for refixing in any position ; Complete all as specified and directed.

Taking up and down GI pipe 20mm bore including fittings, connection, including cleaning for refixing in any position ; Complete all as specified and directed.

Supply and Fixing GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings ISI marked including cutting chases in walls, floors, etc. and their making good in the case of concealed pipe work ; Complete all as specified and directed.

Supply and Fixing GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings ISI marked including cutting chases in walls, floors, etc. and their making good in the case of concealed pipe work ; Complete all as specified and directed.

Supply and Fixing, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm ; Complete all as specified and directed.

Supply and Fixing in repairs bib taps 15mm dia chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed in repairs ; Complete all as specified and directed.

Supply and Fixing in repairs stop valves(Concealed cock) 15mm bore chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc ; Complete all as specified and directed.

Supply and Fixing in repairs stop valve/angel valves 15mm bore chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc ; Complete all as specified and directed.

Supply and Fixing in repairs CP shower rose 125 mm size with swivel joint fancy type including fixing to steel pipe or union ; Complete all as specified and directed.

Supply and Fixing in repairs vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap, integral foot rest including water connection to trap and flushing pipe, flushing cistern etc including lime concrete in lime mortor 1:3 usisng broken bricks 40mm graded coarse aggregate ; Complete all as specified and directed. Note:- Flush pipe and flushing cistern to be measured and paid separately.

Supply and Fixing in repairs PVC low level flushing cistern 10 ltr capacity, with syphonic action PVC float valve, brackets and 32mm bore PVC flush pipe etc ; Complete all as specified and directed.

Supply and Fixing in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm ; Complete all as specified and directed.

Supply and Fixing in repairs Vitreous china wash basin(with pedastal),white flat back,size 550x400mm excluding taps but including brackets,32 mm waste pipe and 32mm brass(CP) waste coupling ; Complete all as specified and directed.

Supply and Fixing as in repairs Pillar taps 15m m bore, cast copper alloy but fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed ; Complete all as specified and directed.

Supply and Fixing Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long embedded in the wall ; Complete all as specified and directed.

Supply and Fixing brass chromium plated towel rail `D’ type 60 cm long fixed to wall ; Complete all as specified and directed.

Dismantling of cast iron ,PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required ; Complete all as specified and directed.

Supply and Fixing 110mm bore PVC (SWR) ISI marks pipes single socketed in any length with rubber ring joints fixed to wall or floor ; Complete all as specified and directed.

Supply and Fixing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls or floor ; Complete all as specified and directed.

Supply and Fixing PVC (SWR ) bends with access door 75 mm bore any radius ; Complete all as specified and directed.

Supply and Fixing PVC (SWR ) bends with access door 110 mm bore any radius ; Complete all as specified and directed.

Supply and Fixing PVC (SWR ) vent cowl 110 mm bore ; Complete all as specified and directed.

Material and Labour for PVC (SWR ) floor trap 75 mm plain with grating including jointing with solvent cement as per site requirement ; Complete all as specified and directed.

Material and Labour for PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement with grating as per site requirement ; Complete all as specified and directed.

Supply and Fixing for PVC (SWR) junction single,(Single T) 110mm bore ; Complete all as specified and directed.

Material and Labour for preparation of new painted wooden surface exc 10cm width or girth and applying two coat of synthetic enamel paint over one coat of primer ; Complete all as specified and directed.

Supply and fixing in repairs cutrain rod 20mm dia of SS with fixing brackets, stops, rollers etc fixed to wall with screws, PVC plug including SS bracket fixed to wall and with SS knobs ; Complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar as cutting, opening of exsiting wall including disposal of unserviceable material,debris and rubbish ; Complete all as specified and directed.

Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 ; Complete all as specified and directed.

Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, in half brick thick walls and built in CM 1:4 ; Complete all as specified and directed.

Demolition of Stone slabs and tiles of laid, beded and pointed of any mortar in any description or thickness in floors, aprons etc. including disposal of unserviceable material,debris and rubbish ; Complete all as specified and directed.

Material and Labour for Granite (of any type) work (table rubbed and polished) 20 mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or beding in CM 1:4 ; Complete all as specified and directed.

Material and Labour for damproofing to wall with two componet Acrylic polymer cementitious water proof elastomeric coating food grade mix to form uniform slurry and apply with paint brush as first coat then laying a layer of fibre glass mesh cloth as first coat is still green with overlap of joits of Fibre mesh not be less than 100mm , then finally apply second layer mix by brush to entire surface of container covering 0.6-0.75sqm /kg at 1mm thickness in two coat depending on the level of substrate and curing it for minimum 3 days. Note : Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding and working upto height 6 mtr etc. Make Pidilite Industries Ltd /Fosrock India Ltd /IWL India Ltd , BASF/T-Guard ANTC of make Thermax complete as per specification and directed by GE . (i) Adoption of necessary safety arrangements like safety belts ropes, helmets netting etc which are required for safety of worker working at height exceeding 6 mtr shall be mandatary and deemed to be inclusive in quoted rates. ; Complete all as specified and directed.

Supply and Fixing in repairs Stainless steel sink including drainage board, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc. overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm with coupling and necessary fixing arrangment ; Complete all as specified and directed.

Demolition of cement concrete in ground floor & paving n.exc 15cm above ground level ; Complete all as specified and directed.

Material and Labour 75mm thick PCC 1:3:6 type C 2 as in plinth protection finishing the surface even and fair with out using extra cement laid to a slope of 1 to 20. It shall be laid in alternate bays, each bay not exceeding 3 m in length with joint to be filled with bituminous mastic filling comprising of misture of one part of heated not blown bitumen 85/25 penetration and three parts of heated sand all as directed by Engineer-In-Charge.

Roughning the surface of old concrete floor picking sweeping clean and washing down with water to remove dust/mud etc.and brushing neat cement slurry @ 3kg/Sqmcomplete complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises ; Complete all as specified and directed.

Material and Labour Non skid coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) size 400mmx400mm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in cm 1:6 Complete all as specified and directed.

Material and Labour Non skid coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) size 400mmx400mm as in skirting etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 10 mm thick screed bed in cm 1:4 ; Complete all as specified and directed.

Material and Labour for glazed ceramic coloured tiles in vertical surface of size 450x350x6-7mm thick joint free on and incl 10mm thick screed bed in cm(1:4)set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles ; Complete all as specified and directed.

Material and Labour for repairing of RCC projections, chajjas, roofs, facia etc. by necessary preparations i.e. scrapping, cutting, chiseling, dusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1 : 2 : 4) using 12.5mm graded crushed stone aggregate and reinforced with 10mm TMT bars with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches area n.exc 5 Sqm each and thickness of RCC member exc 50mm including applying two coats of Finishes to match with the existing surfaces in upto 12m height ; Complete all as specified and directed. Note: - Cost of formwork and welded mesh, bldg ht upto 12 mtr, shall be deemed to be included in unit rate quoted by the Contractor.

Demolition of cement concrete (Reinforcment) of any description ; Complete all as specified and directed.

Material and Labour for RCC in 1:2:4 type B-1(using 20 mm graded stone agg) as in chajjas facia, shelves, lintel etc and similar work ; Complete all as specified and directed.

Formwork to rough finished surface of concrete flat to soffits of shelve, chajja, fins etc including supports over hangs upto 12m height ; Complete all as specified and directed.

Supply and Fixing 10mm dia over TMT bar cut to length bent to shaps including cranking binding spirraly, hooping, hooking end and binding with MS wire (anealed) not less then 0.9 mm dia or securingwith clips ; Complete all as specified and directed.

Supply and Fixing in repairs stainless steel kitchen plate rack size 900 x 750 x 250mm deep made out of 1mm thick sheet including fitting arrangement ; Complete all as specified and directed.

Supply and fixing 18 mm thick PVC sheet shutter one side prelam of any shade as in kitchen cabinet etc ; Complete all as specified and directed.

Supply and fixing 40 mm long hinges self closing type hydrulic type ; Complete all as specified and directed.

Supply and fixing 75 mm long SS handle fixed to cupboard shutter ; Complete all as specified and directed.

Supply and Fixing glass corner of 30cm radius made of 5.5mm thick sheet galss with CP guard rails fixed to walls with brackets ; Complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with screws (for kitchen cupboard shutter and shelves) ; Complete all as specified and directed.

Material and Labour for two coats of synthetic enamel paint over one coat of primer (red oxide)on steel surfaces exceeding 10cm width or girth incl preparation of surface ; Complete all as specified and directed.

Supply and Fixing mild steel cold rolled medium weight butt hinges 100mm size fixed screws to wooden frames or with welding to steel frames ; Complete all as specified and directed.

Supply and Fixing in repairs satinless steel magnetic catcher ; Complete all as specified and directed.

Demolition of cement Concrete in sunken floors exc 15cm thick ( above ground level) and disposing the rubbish debries out side the premises where directed complete.

Material and Labour Plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in sunken filling as mass concrete of sunken complete all as specified.

Material and labour for water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WCs etc shall be as under:- (a) Application of two component acrylic modified cementitious coating on dried surface free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance existing coating and achieve a gripping profile that is clean, dry and free from laitance and any other form of surface contamination. The installation instructions in manufacturer's literature should be strictly complied with including but not limited to the following:- (i) Chipping out any visible cracks in "V-Groove" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/ Dr. Fixit 302 SBR latex/ perma latex SBR/ FOSROC Nitbond SBR latex/ Asian paint latex as required. Final cleaning of surface with powder grinder, wire brush, hair brush & vacuum pressure. (b) Dampen all surface immediately ahead of application of acrylic modified cementitious coating of SIKA top seal-107/ Brush bond FOSROC/ Dr. Fixit/ STP/ CICO. (c) Whilst the surface is still damp from saturation (SSD) apply one coat of acrylic modified cementitious coating of SIKA top seal-107/ Brush bond FOSROC/ Dr. Fixit/ STP/ whilst of the first coat is wet. (d) Apply glass fabric sheet of SIKA Fab 1/ FOSROC/ Dr. Fixit/ STP whilist the first coat is wet. (e) Once touch dry, apply second coat of acrylic modified cementitious coating of SIKA top seal-107/Brush bond FOSROC/Dr. Fixit/STP/CICO of viscosity as per manufacturer ins on the entire area. (f) Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat. (g) The waterproofing coating should be taken to a height minimum 450mm above the finished floor level on the vertical surface. (h) It is essential to cure acrylic modified cementitious coating immediately after application (min 6-8 hrs drying) for a min of 3 to 5 days to ensure full cement hydration and to minimize cracking.

(j) A protection plaster (12-15mm thick) in cement mortar (1:3) admixed with appropriate integral water proofing compound has to be a applied on the walls. (k) Admixture: Sika plastocrete plus/ FOSROC/ Dr. Fixit/ STP/ CICO confirming to IS 2645. (l) Providing and applying a protection screed 50mm thick in cement mortar (1:4) mixed with SIKA plastocrete over the applied water proofing coating on horizontal surfaces. (m) Admixture: Sika plastocrete plus/ FOSROC/ Dr. Fixit/ STP/ CICO confirming to IS 2645. (n) All the corners and joints should be pretreated with an elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansion zone in the centre of make seal tape SIKA/ FOSROC/ Dr. Fixit/ STP. (o) The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations. (p) Water proofing treatment has to be carried out through authorised applicators. (q) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealant. (r) All traps in sunken slabs to be enclosed with PCC (1:1½:3) (min 15cm) alround. (s) The sunken portion shall be filled with PCC (1:5:10) using 40mm graded stone aggregate all as specified. (t) Providing drainage spout pipe GI 40mm dia bore light grade upto outside of outer wall (Approx 450 mm to 600mmlong) including cutting hole in existing wall and making good the disturbed surface complete all as specified and directed. (u) Providing 25mm thick cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as sin flooring for laying floor finishes all as specified. Notes :- (i) Item No. (s) shall be measured and paid seperately.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc.complete all as directedNOTE: Cost of unserviceable materials will be charged from the contractor against Schedule of Credit.

Taking down carefully existing serviceable Ceiling fan/Wall mounted fan, ceiling cable,exhaust fan, ceiling end, etc., removing the fan for keeping in safe custody, hanging the ceiling fan with down rod including clamps, hooks, holdfasteners etc and connecting up, including making electric connection from ceiling rose or connector to fan complete all as directed

Material and Labour for point wiring complete with 1.5 sqmm single core PVC insulated sheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through existing metallic/rigid PVC concealed conduit, medium grade, ISI marked, not less than 20mm bore with conduit accessories concealed on wall and ceiling/roof etc, with provn for fixing modular metal flush boxes not less than 1.0 mm thick of suitable modules, concealed in walls with modular white plated cover as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, sheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as directed. (a) Fan point/ exhaust fan point / one light point / bell/ buzzer controlled by one switch/ bell push.

(b) One socket outet point 5 amps on the same board.

(c) One socket outet point 5 amps on the independent board.

All as Ser item 106 here in before but with 2.5 sq mm wire and earth wire of 2.5 sq mm for 3 Pin 15 Amp modular type socket outlet.

Material and Labour for point wiring complete with 1.5 sqmm single core PVC insulated sheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including non metalic rigid new PVC conduit, medium grade, ISI marked, not less than 20mm bore with conduit accessories concealed on wall and ceiling/roof etc, with provn for fixing modular metal flush boxes not less than 1.0 mm thick of suitable modules, concealed in walls with modular white plated cover as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, sheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as directed (a) One light point/Bell/Fan point controlled by one switch.

(b) One 3 pin 5 Amps socket outlet on independent board.

(c) One 5 Amps outlet point on same board with other switches/sockets

All as per ser item No 110 here in above but point wiring with 2.5 Sqmm FRLS cable and 2.5 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.(i) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for nuetral and green for earth wire.(ii) Modular metal flush boxes concealed in wall with suitable cover plate for mounting switch, sockets, regulator etc. and cost of cutting chases & making good as existing to disturbed surface with cement mortar, if required any shall be deemed to included in the quoted rates.(iii) Modular fittings/fixtures such as switch, socket, regulator, etc., shall be measured and paid separately as under relevant item.

Supply and fixing modular switch 1 way 6A, 240 volts, 1 module complete all as specified and directed

Supply and fixing modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type all as specified and directed

Supply and fixing modular switch 1 way 16A, 240 volts, 1 module complete all as specified and directed

Supply and fixing modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type all as specified and directed

Supply and fixing modular fan step regulator, 2 module, 240 Volts, 50 Hz, suitable for ceiling fan all as directed

Supply and fixing ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65 x 50 mm three terminal, 240 volts, AC single phase complete all as specified

Supply and fixing of single phase call bell ‘DING DONG’, AC 230 volts complete all as specified and directed.

Supply and fixing heavy duty exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, single phase, 1200 RPM, Copper winding of sweep 300 mm complete fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable (1.0 mm² size/core) from ceiling rose to exhaust fan and writing MES No. including cutting hole suitable for fixing exhaust fan complete all as specified and directed

Supply and fixing Air fresh fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, single phase, 1200 RPM, Copper winding of sweep 250 mm complete fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable (1.0 mm² size/core) from ceiling rose to exhaust fan and writing MES No. including cutting hole suitable for fixing exhaust fan complete all as specified and directed

Supply and fixing LED lights fitting 1x 20W, 220V, AC, 6500K, decorative box type with driver, double sided connection, LED tube light connecting up with 3 core flexible copper conductor cable (1.0 mm² size/core) from ceiling rose complete all as specified and directed.

Supply and fixing lamp holder, PVC / polycarbonate type insulated body with back plate suitable for batten / angle fittings complete all as specified and directed.

Material and Labour for distribution board, vertical, made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, VTPN 4 way , 3 phase , 415 volts grade with insulated rated bus bar assembly with isolated neutral bar,door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing MCCB, MCB TPN/TP/SPN/SP etc, including dismantling of old UNSV one of any type/size from site and making good to disturbe surface wall complete all as directed (1.) MCCB 100 Amps , 25 KA, TP 415 Volts

Material and Labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 12 way, 240 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, flush to wall, including testing suitable for fixing MCB SPN, SP etc, including dismantling of old UNSV one of any size/type from site and making good to disturbe surface wall complete all as directed NOTE: Necessary blank plates if required any to cover the blank MCB's place in DB and the rate shall be deemed to included in the quoted rates.

Supply and fixing MCB of SP 5 to 32 Amps current carrying capacity, 240 V, 10KA 'C' curve fixed in the MCB DB complete with connection testing & commissioning complete all as directed

All as per ser item No. 20 above but for MCB SPN 40 to 63 Amps, 415 V grade

Supply and fixing Dusk & dawn roadway luminaries 45 Watt, 230 V AC, 5700K outdoor type with epoxy black powder coated sheet, high pressure die-cast aluminum hosing and heat resistant complete with impact and corrosion resistant including thermal management in multiple optics, PF>95%, THD<10%, Lumen>4500 lm with IP 65/66 protection complete incl connecting wire with flexible PVC insulated copper cables from ceiling rose to fitting including driver, lamp bracket made of 32mm bore galvanised iron light grade pipe made to shape having overall length not exceeding 1.5 mtr, through mild steel clamp of 25mm width and four Nos. nuts, bolts & washers of 12mm dia, 100mm long fixed to wall with all other fittings complete and testing all as specified and directed.

Supply and fixing in replacement, Sub main wiring with two single pole 6 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in and including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting, on surface including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 6 sqmm (nominal area for earth continuty, including taking out and removal of old sub main wiring, complete all as specified and directed Note:- 1 Two runs of 6 sqmm main cable one run of 6 sqmm for earth cable & conduit shall be measured as one unit one running meter.

Supply and fixing in replacement, Sub main wiring with two single pole 4 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in and including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting, on surface including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area for earth continuty, including taking out and removal of old sub main wiring, complete all as specified and directed Note:- 1 Two runs of 4 sqmm main cable one run of 4 sqmm for earth cable & conduit shall be measured as one unit one running meter.

Material & Labour in replacement Earthing complete with galvanized steel earth plate electrods of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 2.25 mr deep below normal ground level) with top edge of the plate not less than 1.5 mr below normal ground level connected to galvanized iron or steel earth wire 4 mm dia by means of bolts nuts check nuts and Gl washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in elecrrical plate No.3 of SSR Part-l and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and salt in alternate layers 25 mm dia light grade Gl pipe, funnel, wire mesh. Concrete 1:3:6 type C-1 for pit and RCC pit cover. The extra cost of the water- ing pipe,bends, elbows shall be included in the unit rate. Note: RCC pit cover shall be precast of RCC 1:2:4type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqm.

Supply and fixing ceiling fan 1200mm sweep complete with blades, down rod as per site requirement, electronic regulator & accessories (i.e. PVC canopy, rubber bush, split pin, hanging clamp, hold fasteners etc.) 230 Volts, white colour, with min air delivery 210 CFM, BEE 5 star rated with brushless direct current motor (BLDC) technology and connecting up with & including 3 core flexible copper conductor cable (1.0 mm² size/core) from ceiling rose to ceiling fan and complete all as specified and directed.

J S S BUILDERS & ENGINEERS (BID ID -3409049)

Bharat Builder (BID ID -3401510)

GEE EMM ASSOCIATES (BID ID -3407221)

M/s. M Company (BID ID -3407515)

RAJ KAMAL BUILDERS (BID ID -3408675)

m/s inder construction co (BID ID -3408981)

M/S MAHAJAN CONSTRUCTION CO (BID ID -3402144)