8295 CERTAIN REPAIR REPLACEMENT OF STREET LIGHT FLOOD LIGHT FITTING FIXTURE AT INS TRATA WARALI BOAT POOL NT POOL INS ANGRE PCDA NAVY ETC IN THE AREA OF AGE EM NW KUNJALI UNDER GE NW KUNJALI

Amount

Taking down security/street light fitting for repair & checking internal wiring, cleaning complete & refixing the same on position after rectification of defects/replacement of items

S & F modular power socket 25A, 2 module, 25A plug top, 25A mini MCB 'C' series 3KA including 4 module box with cover plate complete all as specified and directed. Make: Anchor/ Roma/ Crabtree SAP code : ACNKCXW253, DCTNCSPA025, ACAGXXW253, ACVPPCWV03, ACTXPIWX03

S&F in repair FRP looping box 225x295x122mm with locking arrangement, shockproof and rustproof, rot-proof and termite resistance, cable entry from bottom and side, 100% weather proof for outdoor installation suitable for pole mounting, tamper proof, restricts unauthorised tapping, IS 11731, IP 66/67 suitable for 16-35 sqmm 3.5 core aluminium cable including 1 No MCB 6-32 Amp and connector block two way and fixing with flat aluminium clamps not less than 25 mm x 3 mm with suitable size nuts, bolts and washers inside and outside looping box complets as directed. Make : Hensel Cat No: KF 3500H or equivalent in National/Sintex

M&L for Scraping old paint from steel tubular poles by wire brush not more than up to 9.0 mtr length above ground level including street light arm applying one coat of steel primer and two coat of aluminium paint and marking pole No. all as directed .

S & F in replacement decorative LED post tops with transparent diffuser 20W, IP 65 protection complete with all accessories and all as specified and directed. Make : C&S Cat Part No. LTGLC20WHPLED/W or equivalent cat part in Bajaj/ Havells

S & F in replacement LED garden light 9W cylindrical shaped integral decorative LED bollard with opal acrylic diffuser and IP 65 with all accessories includingn PCC foundation tapper plug, bolts, nuts, screws etc complete all as specified and directed. Make : Bajaj cat part No. BGBOM650 9W LED or equivalent cat part in C&S/ Havells

S&F in replacement of LED street light 120 W energy saving and envirment friendly light fitting with housed in pressure dia cost aluminium housing with sealed toughened glass cover, SMD LED with secondery lens luminaires with IP 66 protection including all fixing accessories complete all as specified and directed Make-Havells CAT Part No. SENDURAPEARLMAGSL120WLED757PASYTOTGASTHO or equivalent cat part in Philips / C & S

S&F in replacement of LED street light 90 W energy saving and envirment friendly light fitting with housed in pressure dia cost aluminium housing with sealed toughened glass cover, SMD LED with secondery lens luminaires with IP 66 protection including all fixing accessories complete all as specified and directed. Make-Havells CAT Part No. ENDURAPEARLPLUSSL90WLED757SASYTOPC or equivalent cat part in Philips / C & S

Supply and fix in replacement of LED flood lights 250 W energy saving and enviromental friendly light fitting IP 66 high power LED floodlight with pressure die cast aluminium housing including all fixing accessories complete all as specified and directed. Havells CAT Part No. ASSEMBLEDCGBOXVALOUR240WAP or equivalent cat part in Philips / C & S

S &F 150 WATT LED Highbay/Mediumbay LED IP65 luminaire (CORVUS-E SERIES) with high efficacy, PDC aluminium housing with polycarborate diffuserk dedicated mounting eye bolt complete with all acessories and fixing arrangement al as specified and directed. Make- C & S CAT Part No.- TEHB150WHPLED/LS/WOR or equivalent Cat Part in Philips/ Havells

S&F in repair of LED Aviation Light Luminaries all as specified and directed. Make : Bajaj Cat No BGAV 302 LED) or equivalent cat part in CG/Philips

Supply and Laying testing and commissioning PVC insulated PVC sheathed armoured electric cable with aluminium conductor of size 4 core 16 Sqmm laid in trenches, passing through pipes, fixed on wall complete including connecting properly by means of thimble and taking out damaged unserviceable cable complete all as specified and directed. MAKE : Gloster/Polycab/Finolex/Havells/Plaza

All as per Srl item No. 12 here in before but conductor of size 2 core 16 Sqmm

All as per Srl item No. 12 here in before but conductor of size 3.5 core 50 Sqmm

All as per Srl item No. 12 here in before but conductor of size 3.5 core 35 Sqmm

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded copper conductor of size 10sq mm 4 core. laid in trench/ duct / along pole/wall etc including making connection complete all as directed. MAKE : Gloster/Polycab/Finolex/Havells/Plaza Note : 1. The cost of thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

S & F in replacement hot dip galvanized anti corroded weather proof octagonal electric poles 7.5 Mtrs long top mounting on foundation complete with base plate including PCC foundation as per SSR provision and directed with 1500 mm long arms bracket, tapper plug, bolts, nuts and screws etc as specified complete including taking out existing RCC/damaged rusted MS pole with street light and street light bracket complete all as specified and directed.

Excavation in trenches n exc1.5m wide and n exc in depth for laying of cables and getting out in loose/soft soilcomplete all as specified and directed.

Returing filling in including spreading, levelling watering and well ramming in layers not exc 25cm complete all as specified and directed.

Removing excavated material n exc 50cm and deposting where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Material and labour for sand filling in trenches fine dry sand as sand cushioning to cable 8 cm before laying of cables and 15 cm after laying cable which shall be punned down to 10 cm complete all as specified and directed. (Note : Only punned down thickness( ie 18 cm) shall be measured and paid)

M&L for un-reinforced, precast concrete cable cover of size 250x150x40mm class LV typeI for cable protection all as specified and directed

Supply and fix in replacement MS arms bracket 30 degree bend, 1.5mtr long for mounting one in nos street light fitting including clamps / nut / bolts & washer to brace the same properly with duly painted in synthetic enamel paint of two coat in silver colour complete all as specified and directed.

S&F GI tubing light grade 80mm dia with all fittings laid in trenches/fixed on wall/ceiling including dismantling of old pipe etc all as specified and directed. Make : Jindal

S&F GI tubing light grade 40mm dia with all fittings laid in trenches/fixed on wall/ceiling including dismantling of old pipe etc all as specified and directed.Make : Jindal

M&L for Cutting road/hard standing for laying of cable and re mataling/making good the same to match the existing surface complete all as directed by Engr incharge.

M & L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to galvanised earth wire of size 4mm dia means of bolts, nuts check nut & washers of galvanised iron or steel & connected to main switch including complete excavation and earth work in soft/loose soil and disposal of surplus soil to a distance not exc 50 meters, PCC Chamber (1:3:6) type C-2 precast RCC cover with frame, funnel wire mesh, 20mm bore light grade galvanised iron or steel pipe for water, charcoal or coke and salt in alternative layers of 15cm compacted thickness all round the earth electrode complete alll as shown in electrical plate No 5 of SSR part-I including welding with suitble electrode and testing complete all as directed. Note : 4mm dia GI wire shall be arc welded to GI plate electrode.

Taking down the LT ACB of capacities 630Amps to 2000Amps of any make for repairs, servicing, comprising the following & refixing the same, re-orientation & labour for taking, defective parts & refixing the same spare parts:- (a) Checking /repairs of the mechanism of ACB (b) Checking/repair of the manual closing of the breakers (c) Decarburizing, setting reassembling, cleaning adjustment of fixed contacts, main contact & chamber and applying petroleum jelly all as complete.

Decorbonising /cleaning of LT 415/380V 3 phase bus bar, bus bar chambers of feeder pillar box, electrical connection complete, ACB, switch fuse unit arrangement incoming & outgoing installed in at various location after removing the complete bus bar from the bus chamber, cleaning with CTC & insure proper decorbonising refixing the same applying backtal (red) solution to the bus bar insulator & checking all the connections & tighting the nuts & bolts thimbles of incoming & out going system complete including replacement of defective rusted bolts, nuts & washers all as specified & directed.

Decorbonising/ cleaning of ducts of HT/LT cable from various location as per following description. (a)Removing of accumulated, stanated water/oil from the duct either manually or mechanically.(b) Cleaning of cable bunch in duct of all accumulated slit/mud/debris/foreign material. (c) Removing & repositioning of RCC/MS duct covers including one coat of red oxide and one coat of black paint as required.(d) Patch civil work plastering and concreting work.

S&F in repairs of 0.71mm thick powder coated aluminium sheet cover, alloy 31000 H4 in ridges, Hips vally gutter including suitable size of revits/nut bolts complete bending, shaping, drilling, cutting notching and all as specified and directed by EIC.

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting TPN 6 way, 440 volts with copper bus bar rating 100 Amps for each phase with 2 neutral bar, dust and vermin proof suitable for incorporation of MCB’s etc complete all as directed. Make - Legrand cat part no 607736 or equivalent in Siemens/ABB/ Schinder/ C&S

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting TPN 12 way, 440 volts with copper bus bar rating 100 Amps for each phase with 2 neutral bar, dust and vermin proof suitable for incorporation of MCB’s etc complete all as directed. Make - Legrand cat part no 607738 or equivalent in Siemens /ABB/ Schinder/ C&S

S & F MCCB FP 100 Amps, 16KA, complete all as specified and directed. Make : Legrand cat No 420015/Seimens/C&S /ABB/ Schinder

S & F in replacement 20 Amps Single pole and neutral enclosure with a Two Pin and earth plug and socket complete with one single pole MCB and making connections complete all as directed. Make -Legrand Cat Part No. 5078 14 or equivalent in Siemens /ABB/ Schinder/ C&S

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5076 42 or equivalent in Siemens /ABB/ Schinder/ C&S

S & F MCB SP 02 Amps,10KA. 230volts all as specified and directed. MAKE: C&S/Legrand / seimens/ABB/ Schinder

S & F MCB SP 6-32 Amps,10KA. 230volts all as specified and directed. MAKE: C&S/Legrand / seimens /ABB/ Schinder

S & F MCB SPN 63 Amps,10KA, 230Volt all as specified and directed. MAKE: C&S/Legrand / seimens /ABB/ Schinder

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan / sockets/power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, removing material to store for keeping in safe custody and making good to disturbed surfaces as directed by Engineer-in-Charge

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100volts, drawn through and including non metalic rigid PVC casing and caping not less than 25mm with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of PVC Modular box with cover plate fixed on wall for fixing the switches, switch sockets,sockets, regulators etc complete all as specified for:- NOTE: Note: (a) Colour coding shall be folowed as (i) Phase- Red/yellow/blue (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately. (c) Make of wire : Polycab/Havells/Gloster/Plaza (d) Make of caping casing : National / Plaza/ Modi/ precision/ pesto plast

(i) One light point controlled by one 5A switch

(ii) One Fan point controlled by one 5A switch

(iii) One 5A flush type switch socket point on same board

(iv)One 5A flush type switch socket point on independent board

M&L for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 4.0sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module complete necessary electric connection for each workstation point comprising of 02 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately.(c) Make of wire : Polycab/Havells/Gloster/Plaza (d) Make of caping casing : National / Plaza/ Modi/ precision/ pesto plast

M&L for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 2.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module complete for One 5 pin, 15A switch socket combination on the independent board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red/yellow/blue (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately. (c) Make of wire : Polycab/Havells/Gloster/Plaza (d) Make of caping casing : National / Plaza/ Modi/ precision/ pesto plast

S & F ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed. Make: Anchor/Roma plus/Legrand/goldmedal

S & F modular switch 1 way 6A,1 module all as specified and directed. Make: Anchor/Roma/Legrand/ goldmedal

S & F modular switch 1 way 16A,1 module all as specified and directed. Make: Anchor/ Roma/ Legrand/ goldmedal

S & F modular socket, 6A - 2/3 pin combined 2 modules all as specified & directed. Make: Anchor/Roma/Legrand/goldmedal

S & F modular socket 6/16A,2/3 pin, combined 2 module all as specified and directed. Make: Anchor/Roma/Legrand/goldmedal

S&F for modular fan step regulator, 120W - 2 modular all as specified and directed. Make: Anchor/Roma plus/Legrand/goldmedal

S&F galvanised iron strip 25 x 4 mm or main earthing lead fixed to wall with clamps or recess or croses or buried in ground or drawn in conduits/pipe or fixed to poles or any other indicated situation for loop earthing etc as required all as specified and directed.

Ashish Enterprises

shree arihant constrution

M/s S.D Construction Co

DHARMESH ENTERPRISES

ELECTRO ASSOCIATES