Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.7 LAccepted-AOC A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L1 | Accepted-AOC L1 | |
| 2 | L2₹21.3 L+₹1.6 L (8.03%)Rejected-Finance | L2 | Rejected-Finance Not Reasonable | |
| 3 | L3₹21.8 L+₹2.0 L (10.2%)Rejected-Finance NOT AVAILABLE | FARIDABAD | HARYANA | 121004 | L3 | Rejected-Finance Not Reasonable | |
| 4 | L4₹23.3 L+₹3.6 L (18.1%)Rejected-Finance ROOM NO A G E 87 EAST GEETANAGAR NAVY NAGAR COLABA MUMBAI 05 | MUMBAI | MAHARASHTRA | 400005 | L4 | Rejected-Finance Not Reasonable | |
| 5 | L5₹23.9 L+₹4.2 L (21.1%)Rejected-Finance 46 HUSENI LAKDA BAZAAR 242 BELLASIS ROAD MUMBAI 400008 | MUMBAI | MAHARASHTRA | 400008 | L5 | Rejected-Finance Not Reasonable |
Tender Value
₹28.5 L
EMD Value
₹57,000
Closing Date
13 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Saurabh Gupta, EE
GE(W) Colaba, Mumbai
SPL REPAIRS TO BLDG NO P 38/2 AND P 38/3 CHOUDHARY HOUSE AND CONSTR OF ALUMINIUM FRAME PARTITION ALONGWITH DOOR AT 2ND FLOOR OF HQ MAO AT AF STN MUMBAI AND PROVN OF COVERED RACK FOR UTILIZATION AS STORE AT HWO SEC OF HQ MAO AT AF STN AND SPL REPAIR
2023_MES_574540_1
8628/E8
Open Tender
Civil Works
Item Rate
180 days
GE(W) Colaba
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE(W) Colaba, Mumbai
₹57,000
Yes
25 Feb 2023
12 Jan 2023
15 Feb 2023
12 Jan 2023
13 Feb 2023
24 Jan 2023
Amount
Dismantling of single layer manglore pattern or similar tiles in roof covering, ridges, hips and velly gutter all as specified icluding ridge with scaffolding where required all as specified and directed.
Dismantling of battens for tiles, shingles etc, of any size including tilting fillets exc 15 cm spaced all as specified and directed..
Dismantling timber scantling unframed 40sq.cm and over in section in any positions all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails all as specified and directed..
S&F rolled mild steel sections conforming to Gde Fe-290(Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates all as specified and directed.
M&L multi-rib TM profile high tensile 550 MPA yield strength colour coated galvalume corrugated steel sheet having maximum pitch of 250mm c/c and minimum 30mm crest depth in length as per site requirement. The feed material is to be manufactured out of 0.50mm (TCT). Total coated thickness with 18-20 microns top coat over 5 microns primer and 8-10mm alkyd backer, zinc aluminium alloy of AZ-150. The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%) and silicon (1.5%) with total mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self tapping screws with EDPM seal or fixed with 'L' or 'J' type or cranked hook bolts in roof all as specified and directed by Engr-in-charge.
M&L for preparation of new untreated steel surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.
M&l multi-rib TM profile high tensile 550 MPA yield strength colour coated galvalume plain steel sheet having maximum pitch of 250mm, c/c and minimum 30mm crest depth in length as per site requirement. The feed material is to be manufactured out of 0.50mm (TCT). Total coated thickness with 18-20 microns top coat over 5 microns primer and 8-10mm alkyd backer, zinc aluminium alloy of AZ-150. The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with total mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self tapping screws with EDPM seal or fixed with 'L' or 'J' type or cranked hook bolts in roof all as specified and directed by Engr-in-charge.
Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land all as specified and directed. Note : Height of Bldg Up to fourth floor.
M&L for 15-25 mm thick ready mix plaster in multy layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished surfaces even and fair, including use of scaffolding, for height of bldgs upto Four stories all as specified and directed by Engr-in-Charge. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.
M&L for 12 mm thick Ready Mix plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, on other than fair faces of concrete surfaces in wall (internal surface) and finished surfaces even and smooth without using extra cement all as specified and directed by Engr-in-Charge. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MD land all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean raddius built in CM 1:6 all as specified and directed.
M&L for preparing newly plastered surfaces of walls/ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from Ground floor upto 04 storeys height of bldgs all as specified and directed. Make: "Apex Ulitima" of Asian Paints "trucare" Primer / "Weather coat all Guard" of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints
S&F second class hard wood clean sawn boarding 25mm thick with butt joints in any situation except flooring & skirting all as specified and directed.
Taking down existing wall finishes any type by vigorously wire brushing, brooming dusting & finally washing with water to clear the surface absolutely free from any kind of existing finishes & foreign materials making good minor cracks, etc. in cement mortar 1:3 and applying putty 2 kg per sqm (Birla putty) on the surface with uniform thickness making surface absolutely smooth & applying two coats of exterior emulsion paint white or tinted over priming the surface with al-kali resistance priming paint all as specified and directed.
S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions of window and wall i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S&F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions of walls and windows i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket, etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.
S&F prelaminated particle board, 12mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed.
S&F fabrication of 3.5 mm thick exterior aluminium composite panels (ACP) in wooden colour or as decided by Engr in charge, as in door, wall paneling, facia of roof, porch and columns, etc. in panels including fixed with aluminium frame work, aluminium frame section of size 25 mm x 38 mm and with screws. ACP panels joints sealed with silicon tape, glazing tape etc.complete all as specified & directed.
M&L sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane all as specified and directed.
M&L sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane all as specified and directed.
S&F frosted film or logo in any type or design and size all as specified and directed
M&L solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as specified and directed by Engr in Charge.
M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing.
M&L 2nd Class hardwood Clean sawn battens at 30cm c/c exc 5 but n exc 15 Sqcm all as specified and directed..
S&F electric water heater, storage typesteel body with copper inner tank and heating element upto 2KW capacity 25 litre, BEE 5 star rated with all accessories such as safety valve, thermostat, NRV, connection piece, etc. to make the heater functional all as specified and directed.
RUPESH CONSTRUCTION CO
ASHOK CONSTRUCTION
David Construction Co.
Unitech Enterprises
vikas construction
SHREE JAGDISH FURNITURE CO.
Shetty Construction Co
Bidder Name
Unitech Enterprises
Nilesh Construction
Shetty Construction Co
ASHOK CONSTRUCTION
David Construction Co.
vikas construction
SHREE JAGDISH FURNITURE CO.
RUPESH CONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .