Provision of Deficient Store House Building for Boat and Diesel Engines at MO (Mumbai)

Amount

SCHEDULE "A" Part - I (BUILDINGS & STRUCTURES WORKS) Total of Sch-'A' Part-I B/F

SCHEDULE "A" PART-II (SITE CLEARANCE, EXCAVATION & EARTHWORK) Total of Sch-'A' Part-II B/F

BLANK

SCHEDULE "A" PART-IV (INTERNAL WATER SUPPLY) Total of Sch-'A' Part-IV B/F

SCHEDULE "A" PART-V (INTERNAL ELECTRIFICATION) Total of Sch-'A' Part-V B/F

SCHEDULE "A" PART-VI (HARDSTANDING & CULVERTS) Total of Sch-'A' Part-VI B/F

SCHEDULE "A" PART-VII (AREA DRAINAGE) Total of Sch-'A' Part-VII B/F

SCHEDULE "A" PART-VIII (SEWAGE DISPOSAL) Total of Sch-'A' Part-VIII B/F

SCHEDULE "A" PART-IX (EXTERNAL ELECTRIFICATION) Total of Sch-'A' Part-IX B/F

SCHEDULE "A" PART-X (EXTERNAL WATER SUPPLY) Total of Sch-'A' Part-X B/F

SCHEDULE "A" PART-XI ( FIRE FIGHTING ) Total of Sch-'A' Part-XI B/F

SCHEDULE "A" PART-XII ( LIGHTNING PROTECTION ) Total of Sch-'A' Part-XII B/F

SCHEDULE "A" PART -XIII (MISCELLANEOUS ITEMS)

SITE CLEARANCE & EARTHWORK

Removing excavated material (any type) and depositing it outside Ministry of Defence Land. Note for 14.01 (i) Before quoting the tender, the bidders are advised to ascertain the distance outside MD and, at which the excavated material/ debris are to be disposed off. No extra claim what-so-ever shall be entertained on this account. (ii) This item shall be considered as per the requirement at site. (iii) All excavation earthwork covered under Sch'A' part III to part XIII shall be measured and paid under this item.

Blank

INTERNAL ELECTRIFICATION

S & F MCB 6- 32 A, 230 V, 50 Hz, SP MCB ('B' curve) for AC applications conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters, etc. complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.

S & F MCB for 32 A, 415 V, 50 Hz, SPN MCB ('B' curve) AC applications conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters, etc. complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.

M & L for 4 core 10 mm² ,1.1 kV grade aluminum conductor, XLPE insulated unarmoured cable conforming to IS 7098 (Part 1): 1988, having stranded aluminium compact shaped conductors as per Cl. 2 of IS 8130: 1984, PVC inner sheath, single armouring of galvanised steel strip/wire and PVC Type ST-2 outer sheath conforming to IS 5831: 1984, including necessary clamping / dressing with cable ties and termination complete as all specified and directed by engineer- in- charge.

M & L for 3 core 10 mm² ,1.1 kV grade aluminum conductor, XLPE insulated unarmoured cable conforming to IS 7098 (Part 1): 1988, having stranded aluminium compact shaped conductors as per Cl. 2 of IS 8130: 1984, PVC inner sheath, single armouring of galvanised steel strip/wire and PVC Type ST-2 outer sheath conforming to IS 5831: 1984, including necessary clamping / dressing with cable ties and termination complete as all specified and directed by engineer- in- charge

S & F 20 W surface / wall mounted LED batten capable of delivering 2000 lumen, having PC diffuser, luminous efficacy of > 90 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed by the engineer-in-charge. Make: Philips Cat-Part No. BN 021C LED20S PSU CDL/NW GR or techno commercial equivalent in makes mentioned in Particular specifications.

S & F 120 W High bay light duranto mounted LED, LED capable of delivering 10000 lumen, extruded aluminium housing with PC diffuser and integrated electronic driver with high efficiency long life LED chips, CRI ≥ 80, power factor ≥ 0.95, system luminous efficacy > 100, having average life 50000 hrs, operating voltage 140- 270, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the LED fitting including hanging arrangements from ceiling with SS chain 2 meter height complete all as specified and directed. Make: Philips Cat-Part No.BY325P LED120S CW PSU GR FG NB XTFCL V1 or equivalent model of Bajaj Cat-Part No. 169958 BGHBM XE 120W LED or Wipro Cat-Part No. LH14-102-XXX-57-XX or techno commercial equivalent in makes mentioned in Particular specifications.

S & F 90 W security light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of ≥ 2600 lumen/W, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, pole mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete in all respect as specified and directed by engineer-in-charge. Make: Philips BRP042 LED 26 CW MR S1 PSU GR or equivalent model of Havells Cat-Part No. ENDURAPEARLSL25W LED757 SASYTOPCMP or Wipro Cat-Part No. LR02-291-XXX-57-XX or techno commercial equivalent in makes mentioned in Particular specifications.

S & F air circulatior fan having blade sweep 600 mm, mettalic body ,air delivery not less than 16000 m³/hr, speed 1400 RPM, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size complete all as specified and directed by engineer-in-charge. Make: Crompton Cat-Part No. AC600WALL-1 or techno commercial equivalent in makes mentioned in Particular specifications.

M & L for earthing complete with GI earth plate electrode of 60 cm x 60 cm x 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire of diameter 4.0 mm as earth lead, by means of bolts, buts, check nuts and washers of galvanised iron or steel, galvanized iron pipe of 15 mm diameter, connected to earthing test point, all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick CI cover, hinged to CI frame on ground level, GI watering pipe, funnel, etc. complete all as specified and directed by the engineer-in-charge.

Supply,install, test and commission, Indoor type ,LT panel box ,cubicle type, factory fabricated,CPRI approved ( any company from list of make), panel board made with 2 mm thick CRCA Sheet , weather and vermin proof ,floor mounted ,Class 7 tank process ,powder coated in siemens gray colour inside and outside, 3 phase, 4 wire system copper bus bar mounted on hygroscopic insulator housed in separate bus bar chamber covered with R-Y-B and black PVC heat shrinkable sleeve, with 50mmx50mmx6mm angle iron frame with and including PCC 1:3:6 type C2 foundation and covering front and back opening hinged door along with suitable locking arrengement including necessry bus bar tappings, copper control wiring of required size, connecting cable with necessary cable glands, lugs etc, independent chamber to accomodate the MCCBs MCBs,measuring instruments,Bus bar and cable gallary chember ,proper arrangements for ventilation complete with provn for connecting earthing at both sides of panel board and comprises as following:- (Industrial Socket PANEL) INCOMER i) MCCB 4 pole 160 A, 415V, 50Hz, 25 KA - 01 No. (Incommer) OUTGOING i) MCCB 4 Pole,40 A, 415V, 16 KA - 5 Nos BUSBAR i)250 A rated copper bus bar with colour coded heat shrinkable sleeve METERING & INDICATION i) Ammeter,Digital type, with suitable CTs – 01 set ii) Voltmeter, Digital type - 01 set iii) R-Y-B phase indicating lamp- 03 Nos iv) Multifunction meter -01

Supply,installation, testing and commissioning, Indoor type ,LT panel box ,cubicle type, factory fabricated,CPRI approved ( any company from list of make), panel board made with 2 mm thick CRCA Sheet , weather and vermin proof ,floor mounted ,Class 7 tank process ,powder coated in siemens gray colour inside and outside, 3 phase, 4 wire system copper bus bar mounted on hygroscopic insulator housed in separate bus bar chamber covered with R-Y-B and black PVC heat shrinkable sleeve, with 50mmx50mmx6mm angle iron frame with and including PCC 1:3:6 type C2 foundation and covering front and back opening hinged door along with suitable locking arrengement including necessry bus bar tappings, copper control wiring of required size, connecting cable with necessary cable glands, lugs etc, independent chamber to accomodate the MCCBs MCBs,measuring instruments,Bus bar and cable gallary chember ,proper arrangements for ventilation complete with provn for connecting earthing at both sides of panel board and comprises as following:- (BLDG LIGHT PANEL1 & 2) INCOMER i) MCCB 4 pole 100 A, 415V, 50Hz, 25 KA - 01 No. (Incommer) OUTGOING i) MCB SPN 32 A, 415V, 16 KA - 5 Nos ii)MCB TP 32 A- 01 Nos BUSBAR i)150 A rated copper bus bar with colour coded heat shrinkable sleeve METERING & INDICATION i) Ammeter,Digital type, with suitable CTs – 01 set ii) Voltmeter, Digital type - 01 set iii) R-Y-B phase indicating lamp- 03 Nos iv) Multifunction meter -01

S&F MCB TP 32 AMP with outdoor enclosure metal/FRP having IP-65 protection rating (For Rolling Shutters)

S & F 20 W surface / wall mounted LED batten capable of delivering 1150lumen, having PC diffuser, luminous efficacy of > 110 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed by the engineer-in-charge. Make: Philips Cat-Part No. BN 021C LED10S PSU GR S1 or techno commercial equivalent in makes mentioned in Particular specifications.

SEWAGE DISPOSAL

S & F of black polyethylene (PE) septic tank of capacity not less than 1000 litre and wall thickness not less than 5mm, including earthwork and excavation in any type of soil, provision of PCC 1:3:6 type C2 (40mm graded stone aggregate) bed to including packing under, and haunching against the sides of tank after it is laid and tested; including provison of all accessories as required, complete all as per manufacturers instructions, complete all as specified and directed. MAKE:- Model (item code) EST of Sintex or techno-commercially equivalent model in Kamakshi Enterprises / Re-Leaf.

EXTERNAL ELECTRIFICATION

Supply, installation, commissioning and testing of LT Panel of suitable size, factory made, CPRI type tested, outdoor, cubical compartmental type, double door,both side openable with hinged doors & locking arrangement, made out of 3.15 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 50 mm x 50 mm x 6 mm, including earthing stud, labeling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enameled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. all complete as specified and directed.

M&L for LT Cable route indicator made out of cast iron and fixed to and including MS angle Iron of size 40mm X 40mm X 6mm, 60 cm length, painted with aluminium paint and embedded in cement concrete (1:2:4) type B-2 block of size 150 mm X 150mm X 150 mm, complete all as specified and directed.

EXTERNAL WATER SUPPLY

Cutting existing CI pipe 40 mm dia for branch connection of 25 mm dia GI pipe incl cutting extg CI 40 mm dia pipe and insertion of tee 40x40x25 mm dia and connecting complete incl cutting extg pipe threading and inserting TEE and Nipple and Union of 40 MM dia incl all required excavation and earth wiork complete all as specified and directed

FIREFIGHTING

S&F of Manual Swing type fire hose reel with drum ISI marked IS: 884 with Thermoplastic hose pipe 30mtr. Long, dia 19-20mm, ISI marked IS: 12585 with GM shut off nozzle complete in all respect Type II (W.P. 10.2 Kgf/cm ).

150 mm dia

100 mm dia

80 mm dia

Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 1.5 sq mm ,2 core, 1100 Volts grade.

S & F of orifice plate made out of 6 mm thick SS 304 with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete all as specified and directed by the engineer-in-charge.

S&L Powder Fire Extinguisher (Stored Pressure type) Capacity 06 Kg duly ISI marked conforming to IS: 15683:2006, with IS 4308, ISI marked ABC powder complete with squeeze grip release valve, discharge pipe, locking arrangement, pressure gauge, operation manual and bracket. Operating Temperature: -30ºC to + 60ºC.

S&L Powder Wheeled Fire Extinguisher Capacity 25 Kg Stored pressure type duly ISI marked conforming to IS: 16018 with rotary release valve, delivery hose, shut-off valve fitted with discharge nozzle & IS 4308, ISI marked BC Powder, Complete in all respect. Operating Temperature: - 30ºC to + 55ºC.

S&L CO2 type Fire Extinguisher ISI marked conforming to IS: 15683. Capacity 4.5 Kg. Complete with delivery hose horn, wheel type release valve, locking arrangement, operation manual and bracket. Operating Temperature:- 30ºC to +60ºC.

S&L CO2 Wheeled Fire Extinguisher ISI marked conforming to IS: 16018. Capacity 22.5 Kg. Complete with composite trolley with handle & wheel, operation manual, wheel type release valve, locking arrangement and shut-off valve fitted with delivery hose horn. Operating Temperature: - 30ºC to + 55ºC.

Cutting of existing MS ERW fire fighting pipe line of 150 mm dia including providing Tee of size 150x150x150 mm for new connection with existing fire fighting line complete including earth work all as specified and directed. (Note:- Cost of fitting like Tee, Collar, etc are included in rates).

LIGHTENING PROTECTION

M&L for Earthing complete with galvanised Steel earth plate electrode 60 cm x 60cmx 6.00 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to GI strip 32 x 6 mm as earthing lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including 20 mm bore midium grade GI Pipe with MS funnel with wire mesh watering arrangement and 50 mm bore light grade GI pipe for earth lead protection from earth plate to test point or panel connceting point , PCC chamber ,CI cover with frame etc including necessary excavation in any type of strata, returning, filling , removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part - I, connected to Earthing test point all as specified and directed and testing on completion. (6- Lightning protection, 2 -External electrical, 2- EOT crane , 2- Rolling Shutter )

EOT CRANE

Design, Supply, Installation and commisioning of indoor type EOT (Electrocally operated travelling) duble grader over head crane as 40 Ton capacity) class II MS non flame proof as per IS-3177 of 2020 and IS-807 of 2006 and other relevant Indian standards of latest versions having straight travel path, operating on 415 volts, 3 Phases 50 Hz, AC and with control voltage exceeding 110 volts AC through low voltage transformer with independent movable pendent supported by chain SS rope having lift of hook 10 Mtr above floor level and rails (long travel length as per drawing 35m), double girder type, floor operated movable pendent control by means of push buttons independent of crab trolly position with protective panel with down shop lead., trailing cable complete with all accessories equipment duly epoxy painted complete all as per OEM specification, as shown on drawings and as directed. The span length cross travel length & hook height mentioned are tentative exact span length , cross travel length & hook height shall be measured and decided at site before fabrication.

EOT crane shall be provided with the following specifications and capable for electrically controlled movements as per below: (I) Capacity of Crane : 40 Tone double box grinder (ii) Clear span:Appx 21m (iii) Bay length : Appx 71m (iv) Hook height : Appx 10m (v) Hoisting speed : 05 mpm and 1 mpm micro speed (vi) CT speed : 10mpm and 2mpm micro speed (vii) LT speed : 10mpm and 2mpm micro speed (viii) Control : Pendant control

ROLLING SHUTTER

Supply,Installation & Testing and commissioning of motorised Rolling Shutters of size 10 mtrs high x 6 mtrs width)_ motorised type Model-RS 78 GS or equivalent with curtains made of single skinned galvalume steel laths with natural finish ,pressed galvalume steel hood & motor cover with natural finish,CE certified Europian make indirect drive operator with enhancement,three station push button with dead man control,windlock storm anchor,external safety brakes etc complete all as specified and directed. Note- Cost of Rolling shutters except those covered in this item shall be deemed to be included in Lump Sum under Sch A Part I, Item No.1 and bidders shall quote their rates accordingly .

NITYA NAND AND SONS CONTRACTORS PVT LTD

Hem Construction Company

M/s Gujarat Construction Company

Vishal Builders