providing 6 feet high PVC coated GI interlocked fencing on part periphery of KVK Farm at Samargopalpur for KVK Rohtak

Amount

Earth work in excavation in foundations, trenches, etc .in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches ,stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres (HSR 6.6)

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 m and lift upto 1.5 m (a) soft/loose soil {HSR 6.25(a)}

Shuttering for faces of concrete foundations and foundations beams (vertical or battering) {HSR 9.13}

Extra for smooth exposed concrete finish as desired which is not to be touched or plastered but is to be left as it comes out of the shuttering for precast RCC battens (RCC posts for fencing). {HSR 9.14}

Cement concrete 1:5:10 with brick ballast 40 mm nominal size in foundation and plinth. {Based on HSR 10.34}

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in foundation and plinth {HSR 10.41}

Extra over item no.10.1 to 10.61 above when work is done in situ in small quantities not exceeding 0.30 cum per block in situ such as staggered blocks, arrows, concrete blocks over inverted filters, bed plates, arches, etc. {HSR 10.62}

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns,(square or rectangular) battens and lintels etc., excluding steel reinforcement but including centring and shuttering, laid in position, complete in all respects. {HSR 10.86)

Extra over item Nos. 10.79 to 10.94 , if 1:1.5:3 mix is used, instead of 1:2:4 {HSR 10.95(a)}

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade (HSR 16.3)

Applying priming coat with metal primer on new steel or iron work including preparation of surface {HSR 16.9}

Steel work, fixed independently without connecting plates, including cutting, hoisting and fixing in position in :- {HSR 18.1} (b)M.S. Flats

Supplying M.S. Bolts of required sizes with nuts and washers complete {HSR 18.15(a)}

Fe-500 D TMT steel bars for R.C.C., works, where not included in the complete rate of R.C.C. , including bending ,binding and placing in position complete (HSR 18.22)

Providing and fixing 0'-4" long M.S. pipe of ¾" dia (middle class) embedded in RCC posts, complete in all respects as per architectural drawing and design.(NS)

Providing and fixing 8 gauge G.I. wire for making rings for reinforced concrete posts including bending, binding and placing in position, complete (NS)

Providing and fixing PVC coated GI interlocked/chain link fencing of size 3" x 3" (superior quality interlocked/chain link fencing, having hot dip GI wire, of make as approved by Engineer-in-Charge & confirming of IS specifications) of 5mm diameter {3mm dia GI wire and 1mm thick PVC coating over the circumference of wire (total thickness of PVC coating would be 2mm over the wire). It is made clear that the size of wire with PVC coating would be 5mm diameter} fixed over RCC posts by means of MS flat and GI bolts/nuts (items of steel frame/posts, flats and bolts/nuts shall be paid separately under respective HSR/NS items) including cutting, drilling holes in all respect as directed by Engineer-in-Charge(NS)

Providing and fixing 10 cm long PVC pipe of 15 mm i/dia of Supreme/Prince make, fixed in RCC posts during casting, complete in all respects as per instruction of Engineer-in-Charge. (NS)

Providing and fixing GI nuts and bolts of 10 mm or any other size dia fixed in position in RCC posts, comple.

S K Yadav Contractor

S.B. Gupta Contractor