8136/2023-24/E8 PROVN OF BATHROOM AND TOILET WITH SOAKAGE PIT IN CERTAIN UNIT AND SPECIAL REPAIR TO BLDG NO T 327, T 328, T 330, AND T 333 UNDER GE 860 EWS

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs blankets any thickness, including cover fillets complete all as specified and directed by Engr-in Charge

M&L 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in walls complete all as specified and as directed.

M&L 6mm Veneered decorative plywood grade I(with BWR resin)with decorative face veneers on one face fixed with screws to timber frame work in ceiling complete all as specified and as directed.

Providing &fixing false ceiling with semi perforated 12mm thick micro tegular edged GRG at all heights with GRG false ceiling tiles of size 595X 595 mm of approved texture design and patterns having moisture content less than 2% humidity resistance of 99% NRCO.50 to 0.75 as per IS 8225:1987,Noncombustible as per BS476(part4)-1970 and light reflectance of 85%(min) to be laid in true horizontal level suspended on inter locking metal T-grid of hot dipped galvanised iron sec of 0.33 mm thick (galvanised @ 120 grams per sqm incl both sides) comprising of main -T runners of size 15x 32 mm of length 3000mm ,cross-T of size 15X32 mm of length 600 mm to form grid module of size 600 x600 mm suspended from ceiling using galvanized mild steel items (galvanizing @80mm per sqm ) i'e 50mm long 8 mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85 x 25 x 2 mm ,Galvanised iron perimeter wall angle of size 24 x 24x 0.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws.The work shall be carried out as per specifications,drawing and as per directions of the Engr-in-Charge

Dismantling of timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section frame work complete all as specified.

M&L second class hard wood timber scantling plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc. 13 Sq cm n.exc 25 Sq cm secured with nails or brads complete all as specified.

M&L second class hard wood timber scantling plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc. 0.3 Sq cm n.exc 6 Sq cm secured with nails or brads complete all as specified.

Taking down chowkhats or frame exc 1.50 sqm each but n exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in Charge

Taking down chowkats or frame not exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed by Engr-in-Charge

Taking down shutter of any description not exc 1 sqm each complete all as specified and as directed by Engr-in-Charge

Taking down shutter of any description exc 2 sqm each complete all as specified and as directed by Engr-in-Charge

M&L in repair 2nd class hardwood wrought in timber scantling to replace old and decayed timber (including piecing,scarfing, etc., of old and new timbers if required) and removing defective of 2nd class hardwood wrought in timber scantling and fixing new timber complete all as specfied and directed by Engr-in-Charge

S&F for 2nd Class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed

Supply and fixing Pressed steel frames size 125mmX60mm for doors with one or more rebates incuding necessary fixing lugs, hinges lock strike plate, etc complete all as specified and directed.

S&F 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr in Charge

S&F 125mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed

S&F 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 150mm Aluminium handles, cast type, anodised complete all as specified and directed

S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

M&L for two coat of synthetic enamel (ordinary tint each coat) over a coat priming with pink primer on new or previously untreated wooden surface complete all as specified and directed by Engr in Charge

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips all as directed.

Supply and fixing 3 mm sheet glass thick ordinary quality and glazing with oil putty in squares n. exc 0.5 Sqm in each pane complete all as specified and directed.

S&F aluminium anodised windows with side hung shutters / sliding shutters and frame made with aluminium section with and including glass/particle board 12mm thick (as specified below) Aluminium sections shall be of size as given below:- Frame : 44.5x44.5x1.60mm thick Top/bottom rail; 90x44.5mmx1.60mm thick side style/rails of shutter-44.5x44.5mmx1.60mm thick Glass : 5mm thick plain glass, sun control film fixed with rubber gasket with aluminium beading . Aluminium fitting such as peg stay, aluminium hinges, aluminium handle 100mm long, aluminium tower bolt 100mm long and making good of wall surface with matching to existing surface complete all as specified and directed

Dismantling of mild steel work of any description all as specified and directed

M & L for MS work in tubular trusses including special shape washers etc compete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240

M & L for perparation of new steel surfaces exc girth of width 10cm and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed

S&F in repair of aluminium (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as speicified and directed by Engr in Charge

Supply and fixing galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples.

S& F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe complete including provn of lime concrete bedding including taking down complete all as specified

Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C2 (Using 20mm graded crushed stone aggregatre) as in floor levelling and finished even and fair without using extra cement complete all as specified and as directed.

M&L for sceed bed or bedding layer of cement mortar 20 mm thick 1:6 cement mortar for laying floor finishes complete all as specified.

M&L for plastic moulded Chequered cement concrete with white cement and pigment tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed.

Dismantling water tanks exc 250ltr but not exc 500ltr and removing to store complete all as specified and as directed.

S&F rotantional moulded polythylene water storage tanks triple layered 500 ltr capacity (cylindrical vertical with threaded closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high dpositionensity plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.

Demolition of Bricks work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete aritcles complete all as specified and directed by Engr-in-Charge

M & L Precast cement concrete solid block made of cement concrete type C1 1:3:6 using (20mm graded crushed stone aggregate) in masonry , exc. 10cm in width and, setting in cement mortar 1:6 complete all as specified.

M & L for 15 mm thick rendering on fair faces of Brick or stone masonry surface in cement mortar 1:6 finished even and smooth complete all as specified and directed by Engr in Charge

M & L for Rendering 15mm thick, in cement mortar 1:4 on PCC block walling or concrete surfaces and finished even and fair without using extra cement complete.

M&L for preparation of new plastered surfaces and apply two coats of cement base paint over a coat of prime complete all as specified and directed.

M&L for preparation surface and apply three coats of white wash on newly plastered surface complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for joint free glazed ceramic coloured tiles350x 250x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on vertical surfaces over plastered surface such as skirting dado etc incl circular cutting or notching and waste etc over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed by the Engr-in- Charge

M&L for coloured ceramic non skid joint free tiles of size 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, over 15mm thick screed bed or bedding layer of cement mortar in cement mortar 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match complete all as specified and directed by Engr-in-Charge

Material and labour for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, arrea of each tiles not exceeding 0.36 sqm, over and including 15mm thick screed bed or bedding layer of cement mortar in cement mortar 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed by Engr in Charge

M& L for Machine cut kota stone slab flooring 20-25mm thick over cement 15mm thick screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

Material and labour for 25mm thick type B0 PCC 1:2:4 (12.5 mm graded crushed stone aggregate) in sub-base all as specified and directed

Taking up or down 15mm dia steel tubing and connections, complete all as specified and as directed by the Engr-in-Charge

Taking up or down 20mm dia steel tubing and connections,complete all as specified and as directed by the Engr-in-Charge

S&F 3 layer PP-R Polypropyene ransom copolymer outer dia of pipe 15 mm pipes SDR 7.4 (PN-16) UV stablized and anti microbial fusionwelded having thermal stavility for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, celling or in floors etc complete all as specified and directed by the Engineer -in-Charge

S&F 3 layer PP-R Polypropyene ransom copolymer outer dia of pipe 20 mm pipes SDR 7.4 (PN-16) UV stablized and anti microbial fusionwelded having thermal stavility for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, celling or in floors etc complete all as specified and directed by the Engineer -in-Charge

S&F 15mm bore PVC connection pipe, 450mm long complete all as specified and as directed by Engr-in-Charge

Supply and fixing in repairs Bib taps, cast copper alloy with handle, chromium plated fancy type, with wall flange screwed down, suitable for 15 mm bore pipe, complete all as specified.

Supply and fixing in repairs Angular/ stop valve/cock, cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, , complete all as specified.

S&F in repair sheet glass shelf assembly/glass corner assembly set of three consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket gurard and railing 60cm long complete all as specified and directed by Engr in Charge

S&F in repair 10 ltr capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe complete all as specified and as directed

S&F PVC (SWR) pipes 75mm dia, single socketed in any length with rubber ring joints fixed to walls including dismantling of existing pipe complete all as specified and directed by Engr in Charge

S&F in repairs 75mm dia PVC(SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 all as directed and specified

S&F 75mm PVC (SWR) bends any radius all as specified and directed

S&F PVC (SWR) pipes 110mm dia, single socketed in any length with rubber ring joints fixed to walls including dismantling of existing pipe complete all as specified and directed by Engr in Charge

S&F 110mm PVC (SWR) bends any radius all as specified and directed

Dismantling plain or corrugated steel sheeting any guage, thickness including nainital or similar pattern roof covering and wall cladding complete all as specified and directed by Engr-in-Charge

S&F of pre- painted galvalume aluminum zinc coating GI based corrugated/ trapzodal, semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws / L-type or J-type or cranked hook bolts in lieu of screws with bituminious washer as specified and directed by Engr in Charge

S&F of pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/ / L-type or J-type or cranked hook bolts in lieu of screws with bituminious washer as specified and directed by Engr in Charge

Preparation of old treated/decorated surfaces (plastered or unplastered/concrete wall cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds mass efflorescent salts trading old and greasy spots etc and applying one coat of cement base paint on old treated surfaces of walls.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m depth for foundation, laying of cable and pipes etc and getting out in hard/dense soil complete all as specified.

M&L for cement concrete type D2 1:4:8 (40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified.

M & L Precast cement concrete block masonry type C1 1:3:6 (20mm graded crushed stone aggregate) with solid blocks, exc. 10cm in width and, setting in cement mortar 1:6 complete all as specified.

M&L for reinforced cement concrete M-25 using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for reinforced cement concrete M-25 using 20mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for reinforced cement concrete M-25 using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and as directed.

M&L for Steel sheet formwork to sides of concrete foundations,footings, bases of columns raft and beams sides and soffits(if any) of foundations and plinth,beams and similar work,vertical or to batter,for rough finished flat surfaces of concrete complete all as specified and as directed.

M&L for Steel sheet formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete complete all as specified and as directed.

M&L for Steel sheet formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc rough finished surfaces of concrete complete all as specified and as directed.

M&L for Steel sheet formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide ® rough finished surfaces of concrete complete all as specified and as directed.

M &L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M &L mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

S&F solid PVC door frame of size, 50x47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails,MS frame shall be covered with heat moulded plain colour PVC 'C' chanel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles &rails eith suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing inthe frame at site as per specification & drawing.

S&F 150mm Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F Aluminium alloy, anodised sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sloding bolt of extruded section or cast alluminium alloy of size 300 mm complete all as specified and directed.

M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface in broken stone or boulders complete all as specified and directed.

M&L for Cement Concrete type C-2, 1:3:6 (20 mm graded crushed stone aggregate) - 100mm thick as Sub base complete all as specified and directed.

Rendering 5mm thick in cement mortar (1:3) finished even and smooth without using extra cement on ceilings complete all as specified and directed.

M&L 3 coats of white wash on ceilings on newly plastered prepared surface complete all as specified and directed.

M&L 100 mm moorum filling under floors including watering and consolidation complete all as specified and directed.

Supply only water proofing compound for external plaster complete all as specified and directed.

S&F Vitreous china ( EWC)pedestal pan and trap , including connection to drain ( or outgoing pipe ) and to flushing pipe antisyphonage pipe, with seat cover etc complete including concrete and making good to floor complete all as specified and directed.

S&F Viterous China WHB 550 x 400 mm flat back including cutting for and pinning in ends of brackets or erecting stand CP Pillar tap 15mm, CP Waste coupling 32mm, PVC waste pipe 750mm long and brackets complete all as specified and directed.

M&L for PVC (SWR) 110 mm gully trap setting joining with solvent cement complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L Cement concrete type C 1, 1:3:6 (20mm graded crushed stone aggregate) 75 mm thick as in plinth protection complete all as specified and directed.

S&F 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F bib taps,15mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

Supply and fix in repair15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed.

S&F for Steel windows/ventilators with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

M&L 3 mm thick glass panes ordinary quality and glazing with oil putty in square n .exc 0.50 Sqm in each Pane etc complete all as specified and directed.

M & L for plain cement concrete 1:3:6 Type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and hunching against the sides of pipes after they are laid and tested for 150 mm bore SGSW pipe complete all as specified.

S & Fin for Vitreous China bowl type urinals, size of 465x355x265mm white(minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (excluding of fixing supply pipe, flushing cistern, flush pipe, trap and waste pipe) complete all as specified and directed.

Excavating over areas, n.exc 1.5 m deep and getting out in hard/dense soil complete all as specified and as directed.

Excavating over areas, exc 1.5 m deep but n. exc 3.0 m deep and getting out in hard/dense soil complete all as specified and as directed.

M & L for PCC 1:4:8 type D -2 ( Nominal mix) using 40 mm graded crushed stone aggregate as in foundation filling and similar work complete all as specified and as directed.

M&L for walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and as directed.

M&L for walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, laid dry complete all as specified and as directed.

S&F PVC (SWR) pipes 150mm dia, single socketed ISI Marked) in any length with rubber ring joints fixed to walls / floor as specified and directed.

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm copper conductor (Multi-standard) FRLS PVC insulated and unsheathed electric cable 1100 volts in and including PVC casing and capping of 25 mm and above (as per conductor run )with all fittings/ accessories and including FRLS PVC insulated and unsheathed electric cable 1100 volts1.5 Sqmm ( multi-stranded) copper conductor single core( Green co lour) cable as continuous earth wire connected to common earth dolly including 50 mm deep box made of 2nd class hard board of required size and shape etc covered with 3 mm thick plastic laminated sheet for one light point independent controlled by one, one way switch complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 111 here-in-before but for one 3 pin socket outlet 5 Amp on independent board .

All as per item No 111 here-in-before but for one 3 pin socket outlet 5 Amp on same board .

All as per item no. 111 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

M&L for sub main wiring with 2 run of 6 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate, ISI marked, non metallic PVC conduit 20 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : 1. The cost of conduit & accessories is deemed to be included in quoted rates. 2. The two run of 6 Sqmm main wire and one run of 6 Sqmm earth wire will be measured as one unit.

S&F switch piano type, single pole, one way, 5 amps, 230 volts, complete all as specified and directed.

S&F socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed.

S&F switch piano type, single pole, one way, 15 amps, 230 volts, complete all as specified and directed.

S&F socket, 6 pin, 5/15 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed.

S&F ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed.

S & F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified

S&F, in repalcement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed at site.

S&F, in repalcement of LED lights fitting 1x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed at site.

Supply and fixing in repalceemnt round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable sizecomplete all as specified

S&F, in repalcement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified.

S&F, in repalcement of LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified.

S&F, in repalcement of exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers, complete all as specified and directed.

S&F, in repalcement of exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and directed.

S&F in replacement of DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

S&F in replacement of DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

S&F in replacement of MCB, C Curve type, 10 kA, 40 to 63 Amp, SPN with over load and short circuit protection, complete all as directed.

S&F in replacement of MCB, C Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as directed.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR 2009 Part-I and connecting to MCBDB’s earth test point all as specified or indicated including testing on completion .

Taking out existing defective cable form trenches complete all as specified.

Supply and laying in replacement XLPE insulated, armoured, heavy duty electric cable, with stranded aluminum conductor 1100 V grade nominal cross sectional area 10 Sqmm, 2 core laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-Charge

Material and labour for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40mm thick complete all as specified.

Material and labour for sand cushioning to under ground electric cable all as per clause No 19.75 of MES SSR Part-I (2009)

PARIDHI CONSTRUCTION

M/S TRADE LINK