Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.2 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹33.2 L+₹6.0 L (22.0%)Rejected-Finance | L2 | Rejected-Finance Higher Bid value. | |
| 3 | L3₹33.7 L+₹6.5 L (24.0%)Rejected-Finance KHAWASNIWAS NEAR POLICE QTRDEORALI GANGTOK SIKKIM | L3 | Rejected-Finance Higher Bid value. | |
| 4 | L4₹34.0 L+₹6.8 L (24.9%)Rejected-Finance | L4 | Rejected-Finance Higher Bid value. | |
| 5 | L5₹34.6 L+₹7.4 L (27.2%)Rejected-Finance | L5 | Rejected-Finance Higher Bid value. |
Tender Value
₹25.0 L
EMD Value
₹50,000
Closing Date
27 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gangtok
GE Gangtok New Mil Stn Gangtok, Sikkim 737102
WELCOME MAINT OF OFFRS MD ACCN UNDER GE GANGTOK
2022_MES_536857_2
8026AE8
Open Tender
Miscellaneous Works
Works
182 days
GE Gangtok New Mil Stn Gangtok
As per tender documents
8 documents required · 8 mandatory
₹500
GE Gangtok
₹50,000
Yes
3 Sept 2022
11 Aug 2022
29 Aug 2022
12 Aug 2022
27 Aug 2022
15 Aug 2022
Amount
Taking down cement plaster/terrazo cast in situ of any description on brick or stone walls, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar (1:6) on fair face of brick or concrete surfaces finished surface even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 20mm thick in cement mortar (1:4) in two layer of 10mm thick each with using WPC shall be mixed with cement mortar in finishing outer layer only as per manufacturer's instruction, on other than fair face of brick/stone masonry (external surfaces) finished surface fair and even without using extra cement complete all as specified and as directed. Note : (WPC shall be measured and paid separately as supply only)
M&L for rendering 5mm thick in cement mortar (1:3) on fair face of concrete surfaces such as ceiling finished surface even and smooth without using extra cement complete all as specified and as directed.
M&L for applying two coats of white wash including preparation of new or previously untreated surfaces of walls complete all as specified and as directed
M&L for applying two coats of white wash including preparation of new or previously untreated surfaces of ceiling complete all as specified and as directed
Material and Labour for complete removal of existing treatment and applying two coats of exterior acrylic emulsion weather shield paint over a coat of alkali resistance primer as per manufacturers instruction including preparation of wall surfaces complete all as specified and as directed.
Material and labour for preparation of old decorated / plastered surfaces of walls , by brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.
Material and labour for preparation of old decorated / plastered surfaces of ceiling , by brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.
Material and labour for preparation of old plastered surfaces of walls by brooming down or steel wire brushing scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper complete all as directed by the Engr-in-Charge.
Material and Labour for necessary preparation of old plastered surfaces and applying one coat of weather shield exterior emulsion paint as per manufacturers instruction complete all as specified and as directed.
Supply only liquid water proofing compound complete all as specified and as directed.
Distmantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removal of dismantled materials/rubbish from site complete all as specified and as directed
Materials & labour for coloured glazed ceramic tiles of size (300x200mm/350x250mm/450x350mm) of 7mm thick, as in vertical surfaces such as skirting/dado/riser to steps etc conforming to IS-13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed/backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed.
Material & labor for non skid coloured ceramic tiles of 7 to 8mm thick ( Square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc conforming to IS-13712, grade B-II-(a) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including cement screed bed/bedding layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed.
M&L for Dark/Light shade Vitrified ceramic tiles 10mm thick (Square/Rectangular) polished, area of each tiles not exceeding 0.36 Sqm, as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed/bedding layer in cement mortar (1:6) complete all as specified and as directed.
M&L for Dark/Light shade Vitrified ceramic tiles 10mm thick (Square/Rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in verticle surfaces such as skirting/dado etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed/backing layer in cement mortar 1:4 complete all as specified and as directed.
Demolition of cement concrete in ground floors and paving n exc 15 cm thicness (un-reinforced) below or above ground level complete all as specified and as directed.
Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Demolition of brick work or stone / boulder masonary or precast concrete block walling , built in cement mortar including all quoins, arches, pillars, etc but exclusing ashlar facings, dressed stoneswork and precast concrete articles complete all as specified and as direcetd.
Hacking out old broken glass (any thickness , size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips and removal from the site complete all as directed by the Engr-in-charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm all as specified and as directed.
Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm each and removal from site complete all as specified and as directed.
Taking down shutters and refixing in same opening of any description ext 1 Sqm but not exc 2 Sqm each complete all as specified and as directed.
S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.
M&L for 35mm thick 2nd class HW plain, framed, paneled shutters (two panel) with lock rail and panel of 9mm thick BWR commerical ply or 12mm veneered particle board with commercial face veneering on both faces. The size of rail & site as per IS : 1003 (Part-I), Kiln, seasoned & chemically pressure, treated complete all as specified and as directed.
M&L for 30mm thick 2nd class hard wood well seasoned glazed and skeleton shutters, open rebated and prepared to receive glass gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified and as directed.
S&F of factory made solid PVC door frame of size 50mmx47mm made out of 5mm thick single side prelaminated PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelaminated sheet as per specification and drawing egiven on MES schedule complete all as specified and as directed.
S&F of 30mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, solid steel frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of both side prelam PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing complete all as specified and as directed.
S&F of factory made steel windows with side hung shutters openable type including friction/box type hinges steel handle and peg stay complete with glazing bars fixed to existiog opening and making good to match as per existing surfaces including taking out old/unserviceable steel windows complete all as specified and as directed.
M&L for two coats of synthetic enamel painting to new wooden surface over a coat of pink primer including preparation of surfaces area exc 10cm width & girth complete all as specified and as directed.
M&L for two coats of synthetic enamel painting to new wooden surface over a coat of pink primer including preparation of surfaces area n.exc 10cm width & girth complete all as specified and as directed.
M&L for two coats of synthetic enamel painting to new steel surface over a coat of red oxide primer including preparation of surfaces area exc 10cm width & girth complete all as specified and as directed.
M&L for preparation of Old painted steel surfaces of any description, over 10cm width or girth, not otherwise described and apply one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of Old painted wooden surfaces of any description, over 10cm width or girth, not otherwise described and apply one coat of synthetic enamel paint complete all as specified and as directed.
S&F for 100mm size brass handles (decorative type) cast type polished bright complete all as specified and as directed.
M&L for 150mm size aluminium anodised cast type handles complete all as specified and as directed.
M&L for 100mm size mild steel pressed handles, oval types, stove enameled black complete all as specified and as directed.
Supply and fix aluminium alloy anodised sliding door bolts 250 mm long with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed.
Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.
Supply and fix 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.
S&F of 75mm size mild steel butt hinges medium weight complete all as specified and as directed.
S&F of 100mm size mild steel butt hinges medium weight complete all as specified and as directed.
S&F continous (piano) hinges, 30mm width of flap(when open), mild steel, bright finish or electro galvanised fixed with stainless steel screws complete all as specified and as directed.
Taking up or down 15mm bore steel water tubings including fittings etc complete and making good disturbed surfaces of walls/ ceilings etc complete all as directed.
Taking up or down 20mm bore steel water tubings including fittings etc complete and making good disturbed surfaces of walls/ ceiling etc complete all as specified and as directed.
Supply and fix galvanised steel water tubing 15mm bore medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as directed.
Supply and fix galvanised steel water tubing 20mm bore medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as directed.
All as per item No. 46 here-in-above but fixing only.
All as per item No. 47 here-in-above but fixing only.
Cutting chases for concealed water tubing pinning in, and making good to facing where required and pointing in cement mortar (1:30 and making good cutting n.exc 10cm girth in concrete block complete all as specified and as directed.
M&L for 25mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate), finished concrete surfaces even and rough to receive floor finishes complete all as specified and as directed.
M&L for 100mm thick cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in hardstanding/flooring and finishing the surface even and fair etc complete all as specified and as directed.
M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in coping complete all as specified and as directed.
M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in fixing of hold fast, bed blocks etc including necessary formwork as required complete all as specified and as directed.
M&L for 75mm thick PCC (1:3:6), type C-2 (using 40mm graded stone aggregate) as in plinth protection, path/hardstanding etc laid in bays/panels n.exc 2.00 Sqm each including construction joints at suitable interval and each corner and filled with bituminous mastic filling (1 Part bitumen & 3 part sand) and finished the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for PCC 1:2:4 type B1 (using 20mm stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.
Material & labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete etc complete all as specified & as directed.
S&F 75mm bore, PVC(SWR) pipes of pressure rating 4 kgf/cm2, single socketed in any length with rubber ring joints, laid in trenches or in floors or as in weep hole with necessary clamps, bolt, bends, Tee etc complete all as specified and as directed.
S&F for 75mm bore PVC (SWR) bend of any radius complete all as specified and as directed.
S&F50mm bore PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or in floor with necessary clamps, bolts, bends, Tee bend of any radius for PVC(SWR) pipes/steel gutters etc fixed to walls complete all as specified and as directed.
S&F 75mm bore PVC(SWR) junction single (Single T) equal or unequal complete all as specified and as directed.
S&F PVC floor trap, Nahani trap, 100mm diameter of outlet, with gratings including jointing to waste pipe fixed in PCC 1:2:4 type B1 (using 20mm graded stone aggregate) complete all as specified and as directed.
Supply and fix in repair vitreous china squatting pan of 'Orissa pattern' of size 580mm x440mm (white) with integral foot rest 'P' or 'S' trap, front or back inlet, any pattern(excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including connection to trap, and to flushing pipe, antisyphonage pipe etc. complete including making good to floor all as specified and as directed. Make : ESSCO Cat Part No. ECS-WHT-453 or equivalent approved.
Supply and fixing in repair white vitreous china wash down water closet pan (pedestal pattern) EWC, of size 570 x 460 x 380 mm with ‘P’ or `S' trap, including fixing bolts, Plastic water closet seat and cover, closed pattern with flat bottom, and mild steel chromium plated or aluminium anodised hinging device, making all necessary connections and making good the disturbed surfaces of floor complete all as specified and as directed. Make : ESSCO Cat Part No. ECS-WHT-551 PS or equivalent approved.
Supply and fix in repair vitreous china, white colour, flat back, wash hand basin of size 55cm x 40cm x 79 cm fixed with brackets, including providing 32mm dia PVC waste pipe, 32mm bore CP waste coupling with or without padestal and making all necessary connections complete all as specified and as directed. Make : ESSCO Cat part No. ECS-WHT-803 or equivalent approved
S&F stainless steel sink with drainage board made of stainless steel 1.0mm thick for kitchen with plug, washers, waste pipe including cantilever cast iron brackets connecting union of 40mm CP waste fitting and PVC waste pipe of required length with CP/PTMT fly nuts etc complete overall size 915mm x 460mm with bowl size 410mm x355mmx 165mm complete all as specified and as directed. (Make : Nirali Model Elegance or equivalent approved make.
Supply and fix in repair 10 litre capacity low level PVC flushing cistern(white), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed. Make : ESSCO Cat part no. WHE-WHT-183L or equivalent approved make complete all as specified and as directed.
Supply and fix in repair PVC connections 15mm size with PTMT/Brass nuts of length 600mm complete all as directed by the Engr-in-Charge. Make Prayag or equivalent make approved.
S&F in repair stainless steel plate rack of 1mm thick and size 750mmx600mmx250mm three tier fixed in position complete all as specified and as directed. Make : Blue Star/Jayna of equivalent.
S&F in repairs 15mm bore pillar taps, fancy type with long neck with aerator cast copper alloy with capstan head chromium plated, scrwed down, high pressure with long screwed shanks, fly-nuts, with scrwed for GI pipe complete all as specified and as directed. Make : ESSCO Code SQT 508KN or equivalent approved make.
Supply & fix in repairs Bib tap , long body cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down for 15mm bore GI Pipe or for brass ferrule including taking down old unserviceable one. Make : ESSCO Cat Part No. SQT-511 KN or equivalent approved make
Supply & fix in repairs Hand Shower (health faucet) 8 mm dia alongwith 1m flexible tube and wall hook fixed in position complete all as directed. Make : JAQUAR Code- ALD-573 or equivalent approved make
S&F in repair 15mm bore chroimum plated brass mixer for mixing 'Hot" and 'Cold' water for wash basin screwed down for iron pipe, complete all as specified and as directed. Make : ESSCO Cat No 516KN or equivalent of approved make.
S&F grating 125mm dia with hole of PTMT/CP (medium weight 40 gmas) complete all as specified and asdirected.
S&F in repair 15mm bore dia concealed stop cocks, chromium plated with long shank and cup complete all as specified and as directed. Make : ESSCO Code-SQT 514EKN or equivalent approved make.
S&F in repair 15mm bore dia angular stop cocks, chromium plated with wall flange screwed down, screwed for iron pipe or union and complete all as specified and as directed. Make : ESSCO Code- TQT 513A or equivalent approved.
S&F sensor type pillar tape chromium plated, screwed down high pressure, screwed for iron pipe 15mm bore complete all as specified and as directed. (Make : Hindware Model No. F240001CP or equivalent approved).
S&F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
S&F in repairs GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.
M&L for MS flat iron bent to shape, holes drilled etc complete as in hold fast & wind ties, clamps etc including one coat of red oxide paint complete all as specified and as directed.
S&F in repair 18/19 mm thick prelaminated particle board, medium density flat pressed, single layer type with BWR type adhesive fixed with screws to timber frame work or in pelmets as in repairs including teak wood lipping of 6mm thick all round fixed with nails complete all as specified and as directed.
S&F in repairs Harrison rail, mild steel, chromium plated, 25mm dia with fixing brackets, stops, rollers etc in curtain rails all specified and directed by Engr-in-Charge
M&L for 18-20mm thick Granite Slab green in one piece machine cut, as in steps, jambs, pillars, window cills, cooking platforms and like bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing including rounding to edges of stone slabs such as in steps, cooking platforms, and other similar situations over and including 20mm thick bedding/backing layer in cement mortar (1:6) complete all as specified and as directed.
M&L for rounding to edges of granite slabs one edge such as in steps, cooking platforms and other similar situations complete all as specified and as directed.
M&L for TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally, hooping for columns, hookings ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for labour for TMT bars 5mm dia and over upto including 10mm dia as in stirrups, spacers and binders cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for labour for RCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in slab supported on walls, beams and columns in floor, roofs, landings, balconies, canopies and in shelves and the like work including necessary form work complete all as specified and as directed. Note : Re-inforcement shall be measured and paid separately.
S&F door closer hydraulically regulated, aluminium(die cast) body designation No.3, universal type, suitable for door shutters or 701 to 850mm in width and of weight between 36 to 60 Kg and fixed complete all as specified and as directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 150mm complete all as specified and as directed.
M&L for brickwork with subclass ''B'' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.
Demolition to cement concrete of any description and in any position not otherwise specifically provided for (unreinforced) complete all as specified and as directed.
S&F in repair 5mm (tinted) sheet glass, ordinary quality in squares exc 0.5 Sqm each pane complete all as specified and as directed.
S&F in repair 4mm (tinted) sheet glass, ordinary quality in squares n.exc 0.5 Sqm each panel complete all as specified and as directed.
S&F 3mm thick sheet glass panes, ordinary quality and glazing with oil putty including steel pin in square n.exc 0.5 Sqm in each pane fixed to steel frame complete all as specified and as directed.
Smart Painting :- M&L for complete removal of existing treatment from old decorated plastered surfaces of wall by sanding machine, removal of nails etc & filling cracks/hole with putty applying wall putty upto 1mm thick as required (multipurpose mixer shall be used for proper mixing of putty) and applying two coats of distemper white or coloured by auto roller complete all as specified and as directed as per Manufacturer's instruction.
Smart Painting :- M&L for preparation of newly plastered surace of wall by sanding machine, applying wall putty (multipurpose mixer shall be used for proper mixing of putty) and applying two coats of distemper white or coloured by auto roller complete all as specified and as directed as per Manufacturer's instruction.
M/S ANIL KUMAR THAKUR
M/S S. S CHETTRI AND SONS
KAMLESH ENTERPRISE
M/S MANOJ VERMA
DHARMINDER SINGH
MAHENDRA KHAWAS
KARMA TSETEN BHUTIA
RAAJ BANGAR
KARMA SHERPA
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .