Repair to Bridge over Sapua Nallah on Gandanali to Khaliborei Road _Road_Minor repairs to railings, deck slabs etc. and paintings along with repair of bridge approaches_0.000 to 0.200

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials by manual means and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 but excluding the charges of GST etc. complete & as per direction of the Engineer-in-Charge.

Supplying & filling moorum of approved quality including watering to complete saturation & ramming complete with all leads & lifts including cost, conveyance, royalty & taxes of all materials & cost of all labour & T&P required for the work etc. complete as per specification & direction of Engineer in charge.

Earth work in excavation of fondation in hard soil within the initial lead & lift including dressing & levelling the bed & depositiong the excavated earth away from the site etc. all complete as per the direction of Engineer in Charge.

Plain cement concrete M-15 grade in Foundation complete as per drawing and technical specification.

Providing and laying boulder appron for bed protection & pitching on slopes with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications Clause 1301 & 1302

Grouting Approns and revetment 23Cm deep with cement concrete (1:4:8) with 2.5cm broken granite metal per 1Sqm

Painting on concrete surface Providing & applying two coats of Water Based Cement Paint to unplastered concrete surface after cleaning the surface of dirt,dust, oil,grease,efflorescence & applying paint @ of 1lt/2 Sqm

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.