Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.9 LAccepted-Finance | L1 | Accepted-Finance Excess negative tender premium. Critical Rate Analysis and Justification letter dated 28.09.2026 was submitted by the bidder upon request, and found to be satisfied. Hence accepted. | |
| 2 | L2₹23.7 L+₹79,629.22 (3.48%)Accepted-Finance | L2 | Accepted-Finance Bid found in order | |
| 3 | L3₹26.8 L+₹3.9 L (16.9%)Accepted-Finance | L3 | Accepted-Finance Bid found in order | |
| 4 | L4₹30.3 L+₹7.4 L (32.3%)Accepted-Finance 15 3 625017 | MADURAI | TAMIL NADU | 625017 | L4 | Accepted-Finance Bid found in order | |
| 5 | Rejected-Technical 0 RAM SURAT MAURYA 0 SHAKARMANDI JAUNPUR JAUNPUR UTTAR PRADESH 222001 UDYAM UP 38 0066946 | JAUNPUR | UTTAR PRADESH | 222001 | - | Rejected-Technical WRD Live Certificate not submitted |
| Sl No | Description | Qty | Unit | BALAJI CONSTRUCTION L6 | SUDHA CONSTRUCTION L2 | S K & CO L3 | KARTHEESAN L5 | SURYAVEL ASSOCIATES L1 | SRI VIDHYA LAKHMI & CO L4 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Earth work deploying earth moving machineries for desilting channel and forming bund on either side depositing the earth on banks including jungle clearance ect.complete., having width more than 10m | 20,250 | Cum | 50 ₹10,12,500 | 39.85 ₹8,06,962.5 | 42.5 ₹8,60,625 | 45 ₹9,11,250 | 35 ₹7,08,750 Lowest | 42 ₹8,50,500 |
| 2.00 | Earth work excavating and depositing on bank with an initial lead of 10m and initial lift of 2m inhard stiff clay, stiff black cotton soil, hard red earth shales, murram, gravel stoney earth and earth mixed with small size boulders and hard gravely soil etc., complete complying with standard specification and as directed by the departmental officers for foundation | 7 | Cum | 100 ₹700 Lowest | 183.83 ₹1,286.81 | 196.98 ₹1,378.86 | 207.77 ₹1,454.39 | 150 ₹1,050 | 211 ₹1,477 |
| 3.00 | Providing and placing in position Plain Cement Concrete of M10 Graded mix using hard granite coarse aggregate of (well graded) size of 40mm down graded to IS specified graiding (to achieve the specified characteristic strength of 10N/mm2 in 28 days) and mixing the ingredients in approved mixer including dewatering of the placement site by baling/pumping and dewatering wherever necessary placing in layers watering, curing, finishing the surface with all leads and lifts, etc.. complete in all respects so as to attain the profile and strength as specified in the approved drawings and specification etc., complete complying withstandared specifications and as directed by the Engineer incharge of work | 3 | Cum | 5,500 ₹16,500 | 4,061.19 ₹12,183.57 Lowest | 4,351.69 ₹13,055.07 | 4,589.9 ₹13,769.7 | 5,500 ₹16,500 | 4,648 ₹13,944 |
| 4.00Providing steel centering for sides and soffits including necessary supports and strutting for RCC slabs, beams or plain surface upto 3.00m height and all cross bracings using mild steel "B.G 10" gauge of size 90 x 60cm stiffened with welded mild steel angle of size 25mm x 25mm x 3mm for boarding laid over silver oak (country wood) joists of size 10cmx6.5cm spaced at about 90cm centre tocentre and supported by casurina props of 10 to 13cm dia spaced at 75cm centre to centre etc.. complete complying with standard specification and as directed by the Departmental officers (The retrieved materials should be take back by the contractor) The payment for centering shall be given after the concrete is laid | |||||||||
| 4.01 | with strutting | 61 | Sqm | 970 ₹59,170 | 767.5 ₹46,817.5 Lowest | 822.4 ₹50,166.4 | 867.42 ₹52,912.62 | 950 ₹57,950 | 878 ₹53,558 |
| 5.00 | Providing and placing in position plain cement concrete of M15 graded
mix using broken hard granite coarse aggregate (well graded) 60% of nominal maximum size of 40mm and 40% of nominal maximum size of 20mm and down graded to IS specified grading (to achieve the specified characteristic strengh of 15N/mm2 in 28 days) and mixing the ingradients in approved mixer including dewatering of the placmenet site by baling/pumping and diverting wherever necessary placing in layers and vibrating watering, curing finishing the surface with all leads and lifts etc., complete in all respects so as to attain the profile and strength as speciried in the approved drawing s and specification and as directed by the Engineer incharge of work complying with standard spefcifications. (with vibrator) | 19 | Cum | 5,600 ₹1,06,400 | 4,474.99 ₹85,024.81 Lowest | 4,795.09 ₹91,106.71 | 5,057.58 ₹96,094.02 | 6,000 ₹1,14,000 | 5,121 ₹97,299 |
| 6.00 | Supplying, fabricating and placing in position of ribbed steel bars of various diameters for all reinforced concrete works, including cost of rods and binding wire, labour charges for cutting the rods to the required lengths, bending, tying and fixing in position for various depths and heights below and above ground level complete as directed by the Engineer complying with specification | 0.6 | Qtl | 70,000 ₹42,000 | 6,420.31 ₹3,852.19 Lowest | 6,879.56 ₹4,127.74 | 7,256.15 ₹4,353.69 | 8,500 ₹5,100 | 7,348 ₹4,408.8 |
| 7.00 | Reinforced Cement concrete of grade M20 using hard broken aggregate of maximum nominal size of 20mm HBG and down grade to I.S specified grading, mixed in mixer machine including dewatering the placement site, laying the concrete in layers and in bays, vibrating, compacting and finishing the surface with all leads and lifts, watering, curing complete to attain the profile and strength as specified inthe drawings and specification for various depths and heights below and above ground level complete as directed by the Engineer complying with specification | 2 | Cum | 7,700 ₹15,400 | 5,984.83 ₹11,969.66 Lowest | 6,412.93 ₹12,825.86 | 6,763.98 ₹13,527.96 | 8,500 ₹17,000 | 6,911 ₹13,822 |
| 8.00 | Fabricating, Supplying and erection of Screw gearing steel shutters of size above upto 1.00 m width consist shutters of skin plate made out of 8mm thick mild steel plate and horizontally stiffened with 65x65x6mm provided with 8mm mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the mild steel Angle at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipment. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipment. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc. complete | 11.04 | Sqm | 57,520 ₹6,35,020.8 | 40,211.37 ₹4,43,933.52 Lowest | 43,087.72 ₹4,75,688.43 | 45,446.33 ₹5,01,727.48 | 45,000 ₹4,96,800 | 45,000 ₹4,96,800 |
| 9.00 | Fabricating, supplying and fixing of 63mm dia Screw Rod made up of MildSteel duly machined and fully threaded to suit the Head set Assembly and provided with required holes. Conveying and leading the screw rod to the worksite. Fixing the screw rod to the shutter gusset plate with required bolt and nut in proper alignment to the head set including dismantling the existing damaged screw rod,conveying and stacking at section store. The Screw rod should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, conveyance charges for labours and materials and warranty for 5 years etc. complete | 29 | Rm | 17,000 ₹4,93,000 | 12,177.98 ₹3,53,161.42 | 13,049.08 ₹3,78,423.32 | 13,763.38 ₹3,99,138.02 | 11,675 ₹3,38,575 Lowest | 13,900 ₹4,03,100 |
Tender Value
₹40 L
EMD Value
₹40,000
Closing Date
23 Sept 2026, 5:00 pmClosed
Executive Engineer, WRD
Executive Engineer, WRD Lower Thamirabarani and Korampallam Aru Basin Division, Thoothukudi
Civil Work
2026_WRD_705072_1
48/LTKABD/2026-27
Open Tender
Civil Works - Water Works
Lump-sum
90 days
Araikulam
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹40,000
28 Sept 2026
16 Sept 2026
23 Sept 2026
16 Sept 2026
23 Sept 2026
16 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work deploying earth moving machineries for desilting channel and forming bund on either side depositing the earth on banks including jungle clearance ect.complete., having width more than 10m | 20,250 | Cum | - | - |
| 2 | Earth work excavating and depositing on bank with an initial lead of 10m and initial lift of 2m inhard stiff clay, stiff black cotton soil, hard red earth shales, murram, gravel stoney earth and earth mixed with small size boulders and hard gravely soil etc., complete complying with standard specification and as directed by the departmental officers for foundation | 7 | Cum | - | - |
| 3 | Providing and placing in position Plain Cement Concrete of M10 Graded mix using hard granite coarse aggregate of (well graded) size of 40mm down graded to IS specified graiding (to achieve the specified characteristic strength of 10N/mm2 in 28 days) and mixing the ingredients in approved mixer including dewatering of the placement site by baling/pumping and dewatering wherever necessary placing in layers watering, curing, finishing the surface with all leads and lifts, etc.. complete in all respects so as to attain the profile and strength as specified in the approved drawings and specification etc., complete complying withstandared specifications and as directed by the Engineer incharge of work | 3 | Cum | - | - |
| 4Providing steel centering for sides and soffits including necessary supports and strutting for RCC slabs, beams or plain surface upto 3.00m height and all cross bracings using mild steel "B.G 10" gauge of size 90 x 60cm stiffened with welded mild steel angle of size 25mm x 25mm x 3mm for boarding laid over silver oak (country wood) joists of size 10cmx6.5cm spaced at about 90cm centre tocentre and supported by casurina props of 10 to 13cm dia spaced at 75cm centre to centre etc.. complete complying with standard specification and as directed by the Departmental officers (The retrieved materials should be take back by the contractor) The payment for centering shall be given after the concrete is laid | |||||
| 4.01 | with strutting | 61 | Sqm | - | - |
| 5 | Providing and placing in position plain cement concrete of M15 graded
mix using broken hard granite coarse aggregate (well graded) 60% of nominal maximum size of 40mm and 40% of nominal maximum size of 20mm and down graded to IS specified grading (to achieve the specified characteristic strengh of 15N/mm2 in 28 days) and mixing the ingradients in approved mixer including dewatering of the placmenet site by baling/pumping and diverting wherever necessary placing in layers and vibrating watering, curing finishing the surface with all leads and lifts etc., complete in all respects so as to attain the profile and strength as speciried in the approved drawing s and specification and as directed by the Engineer incharge of work complying with standard spefcifications. (with vibrator) | 19 | Cum | - | - |
| 6 | Supplying, fabricating and placing in position of ribbed steel bars of various diameters for all reinforced concrete works, including cost of rods and binding wire, labour charges for cutting the rods to the required lengths, bending, tying and fixing in position for various depths and heights below and above ground level complete as directed by the Engineer complying with specification | 0.6 | Qtl | - | - |
| 7 | Reinforced Cement concrete of grade M20 using hard broken aggregate of maximum nominal size of 20mm HBG and down grade to I.S specified grading, mixed in mixer machine including dewatering the placement site, laying the concrete in layers and in bays, vibrating, compacting and finishing the surface with all leads and lifts, watering, curing complete to attain the profile and strength as specified inthe drawings and specification for various depths and heights below and above ground level complete as directed by the Engineer complying with specification | 2 | Cum | - | - |
| 8 | Fabricating, Supplying and erection of Screw gearing steel shutters of size above upto 1.00 m width consist shutters of skin plate made out of 8mm thick mild steel plate and horizontally stiffened with 65x65x6mm provided with 8mm mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the mild steel Angle at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipment. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipment. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc. complete | 11.04 | Sqm | - | - |
| 9 | Fabricating, supplying and fixing of 63mm dia Screw Rod made up of MildSteel duly machined and fully threaded to suit the Head set Assembly and provided with required holes. Conveying and leading the screw rod to the worksite. Fixing the screw rod to the shutter gusset plate with required bolt and nut in proper alignment to the head set including dismantling the existing damaged screw rod,conveying and stacking at section store. The Screw rod should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, conveyance charges for labours and materials and warranty for 5 years etc. complete | 29 | Rm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
DR48.pdf
Tender Documents • 0.64 MB
BOQ_847509.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .